Search

Bovine bone is an animal‐origin matrix rich in type I collagen (COL I) and it necessitates prior demineralization and makes COL I available. This study investigated the ossein–hydroxyapatite physicochemical properties evaluation as a result of processing and solubilization by acids and revealed the bone matrix demineralization and making COL I available. The tibia residue from bovine sources was processed, ground, and transformed into bone matrix powder. The bone matrix was solubilized in acetic acid followed by lactic acid. The bone matrix was evaluated as a result of processing and solubilization by acids: ossein and hydroxyapatite percentages by nitrogen and ash content, mineral content, particle size distribution, Fourier‐transformation infrared spectroscopy, x‐ray diffraction, and scanning electron microscope. For the obtained residual extracts, pH and mineral content were evaluated. The solubilization by acids affected the ossein–hydroxyapatite physicochemical properties, and the bone matrix solubilized by acetic and lactic acid showed the preservation of the ossein alongside the loss of hydroxyapatite. The processing and the solubilization by acids were revealed to be a alternative to bone matrix demineralization and enabling the accessibility of bone COL I. Practical Application: Bovine bone is an abundant type I collagen source, but processing maneuvers and demineralization effect present limitations due to the rigidity of the structural components. Exploring methodologies to process and demineralize will allow type I collagen to be obtained from the bone source, and direct and amplify the potentialities in the chemical and food industries. The research focused on bone sources and collagen availability holds paramount significance, and promotes repurposing agribusiness residues and development of protein–base products. [ABSTRACT FROM AUTHOR]

In this study, we investigated the effect of addition of citrus fiber (CF; 5% and 10%, which consists mainly of soluble pectin and insoluble cellulose) on physical properties and microstructure of meat analogs based on soy protein isolate and wheat gluten using high‐moisture extrusion. Layered structure or microstructure of meat analogs was observed by scanning electron microscope and confocal laser scanning microscope. Compared to the control (without CF), meat analogs with CF addition showed disorder layered microstructure, which was interconnected with smaller fibers. Rheological measurements (strain sweep and frequency sweep) show that the incorporation of CF resulted in meat analogs with softer texture. The moisture content of meat analogs increased significantly upon the addition of CF, which was also correlated with juiciness. Sensory evaluation and dynamic salt release results confirm that the saltiness of meat analogs with CF addition was enhanced due to the structural changes of phase‐separated structures, achieving salt reduction by 20% and showing a saltiness similar to the control sample. This research provides a novel approach to modulate the saltiness perception of meat analogs by modifying the phase separation of protein/polysaccharides. Practical Application: Citrus fiber is added to the plant protein matrix to prepare meat analogs with high moisture content and enhanced saltiness perception via modifying the phase separation of protein/polysaccharides. This work provided a potential target for the meat industry to produce the meat analogs with less salt intake. Further research can be conducted using modified fibrous or inner structure of meat analogs to improve its quality. [ABSTRACT FROM AUTHOR]

Effect of tea polyphenols (TP) on the quality of Chinese steamed bun (CSB) was investigated, while the interaction and action mechanism between TP and vital wheat gluten (VWG, constitutive proteins of flour) were further explored. With a low concentration (1%) of TP, CSB showed positive changes in quality, and the hardness of CSB decreased by 33.95%, while its specific volume, springiness, and resilience separately increased by 1.8%, 11.9%, and 5.5%, whereas the higher concentrations of TP (2% and 4%) caused an adverse impact. By observation of scanning electron microscope, VWG formed a fluffier structure with a low concentration of TP, while the structure deteriorated at high concentration of TP. In addition, the secondary and tertiary structures of VWG were both changed by TP. Along with the results of thermodynamic analysis (thermogravimetric and differential scanning calorimetry measurements), TP could induce the structural rearrangement of VWG. Further, a lower amidogen and sulfhydryl contents of VWG were obtained in TP groups, which illustrated that peptide and disulfide bonds of VWG were not possibly interrupted by TP. Instead, hydrophobic residues of VWG were bonded to form a more hydrophilic structure. Moreover, according to molecular docking results, epigallocatechin‐3‐gallate interacted tightly with VWG by hydrogen bonds and hydrophobic actions, and the action sites were mainly at hydrophobic and hydrophilic residues. All results suggested that the VWG structure was affected greatly by TP, and a low dose of TP might be potential to improve the quality of flour products. Practical Application: The physicochemical properties of gluten show the significant effects on the quality of flour products in food industry. In the present study, a low dose of tea polyphenols exhibited a strengthened effect on gluten, so as to ameliorate the texture of Chinese steamed bun (CSB) due to their tight interactions with gluten, while the color of CSB was changed to brown as tea polyphenols. All results suggested that a low dose of tea polyphenols could be potentially utilized to improve flour quality and enhance gluten strength in food industry. [ABSTRACT FROM AUTHOR]

In this work, we investigated the effects of sucrose (0%–30%, w/w) on the pasting properties, retrogradation, freeze–thaw stability, texture, and the possible interaction with corn starch–tamarind seed polysaccharide (CS–TSP) mixtures. Sucrose increased the gelatinization temperature (from 76.4 ± 0.1 to 87.6 ± 0.0°C), peak viscosity (from 3358.0 ± 1.4 to 7732.5 ± 44.5 cP), and final viscosity (from 3514.0 ± 31.1 to 7724.5 ± 142.1 cP) of CS–TSP mixtures. Further, sucrose limited the increase in the storage modulus of the mixture pastes, transfer of bound water to free water, and water syneresis during the freeze–thaw process. Additionally, sucrose resulted in a more complete gel structure with stronger resistance. Scanning electron microscope and fluorescence labeling analysis showed that the presence of sucrose helped in tight entanglement or cross‐link between amylose or between amylose and TSP. Thus, these results in this study could help to improve physicochemical properties of starch‐based products, such as glue pudding and other starch desserts. [ABSTRACT FROM AUTHOR]

Corn starch‐based hydrogels are safe and biodegradable polymers with a wide array of applications in food science. The aim of this study was to investigate the effects of starch and natural filler resistant starch type 2 (RS2) particles concentration on the textural properties of corn starch hydrogels. Native starch (NS) hydrogels of 8%, 10%, 12%, and 15% w/v were prepared; in each of these dispersions, part of the NS was substituted with RS2 to a concentration of 2% or 10%. NS hydrogels with the highest concentrations had the maximum hardness, cohesiveness, and gumminess values, whereas the addition of RS2 particles did not affect gel textural properties. Native and substituted RS2 hydrogels showed close similarities in their rheological and textural characteristics. Water‐holding capacity greatly decreased with increasing starch concentration, suggesting that the hydrogels with the highest NS concentration had the densest network as depicted by SEM micrographs. Subsequently, hardness, gumminess, and consistency coefficient were linearly correlated to starch concentration and storage time. Fluid release was exponentially dependent on starch concentration. The degree of crystallinity by X‐ray diffraction (XRD) indicated that by increasing starch concentration and substitution level, crystallinity increased. Consequently, NS concentration determined the textural properties of corn starch hydrogels. On the other hand, RS2 substitutions did not affect any of these parameters, indicating their potential role as inactive fillers with a beneficial effect on the maintenance of normal blood glucose levels. Therefore, the consistency of a food gel can be optimized by changing the ratio of inactive filler to starch gel matrix. [ABSTRACT FROM AUTHOR]

March Online Cover: Botanical characteristics of different varieties of kudzu roots and leaves and scanning electron microscope images of three kudzu starches, from "Study on structural characteristics and physicochemical properties of starches extracted from three varieties of kudzu root (Pueraria lobata starch)" by Xuantong Duan, Yongmei Guan, Huanhuan Dong, Mei Yang, Lihua Chen, Hua Zhang, Abid Naeem, and Weifeng Zhu 1048. [ABSTRACT FROM AUTHOR]