Search

Zein fibers were successfully fabricated via solution blow spinning (SBS) using acetic acid as solvent. Surface tension, viscosity and modulus of zein solutions were respectively determined by force tensiometer and rheometer. Increases of these properties were observed with an increase of concentration from 20% to 35% (w/w). The fabrication conditions of zein fibers were initially investigated as a function of zein concentration (25% to 35% w/w), feed rate (0.04 to 0.1 mL/min) and air pressure (0.28 to 0.62 MPa). The average fiber diameter (AFD) ranged from 174 to 9595 nm based on scanning electron microscopy (SEM). A Box-Behnken experimental design (BBD) was further performed to identify and quantify the significance of above parameters. The statistical analysis showed that the linear coefficient of concentration, the quadratic term of concentration as well as the interaction between concentration and air pressure were demonstrated statistically significant. Optimal conditions, with an AFD of 138 nm, could be obtained in the SBS of zein fibers by combining a concentration of 23% (w/w), a feed rate of 0.04 mL/min and an air pressure of 0.38 MPa. The moisture sorption capacity of fibers increased slightly as AFD decreased from ∼550 to ∼200 nm, with an increase of BET surface area from 116.5 to 140.0 m 2 /g., (Published 2016. This article is a U.S. Government work and is in the public domain in the USA.)

Unlabelled: Thyme essential oil (TEO) and apple skin polyphenols (ASP) are natural compounds considered as generally recognized as safe by FDA, with biological effects against bacteria and fungi. This work aimed to evaluate physical and antimicrobial properties of açaí edible films formulated with TEO and ASP at 3% and 6% (w/w) individually or combined at 3% (w/w) each. Physical properties studied include mechanical resistance, water vapor permeability (WVP), color, and thermal resistance. Antimicrobial activity against Listeria monocytogenes was determined using the overlay diffusion test. Addition of ASP resulted in improved mechanical properties. TEO at 6% (w/w) resulted in increased elongation. ASP films had significant higher WVP than control film. ASP films were lighter and had more red color than other films. Incorporation of ASP resulted in improved film thermal stability, whereas TEO caused rapid thermal decomposition. Presence of clusters was observed on the surface of films. Addition of ASP resulted in a smoother surface, whereas addition of TEO led to the formation of crater-like pits on the film surface. Açaí edible film incorporated with 6% (w/w) TEO presented the highest antimicrobial activity. However, both antimicrobials are necessary in the açaí films in order to obtain edible films with suitable physical-mechanical properties. The results of the present study showed that TEO and ASP can be used to prepare açaí edible films with adequate physical-mechanical properties and antimicrobial activity for food applications by direct contact., Practical Application: Developed açaí edible films presented antimicrobial activity against L. monocytogenes and good physical-mechanical properties, showing the potential use of açaí edible films in food preservation., (Published 2014. This article is a U.S. Government work and is in the public domain in the USA.)

Cellulose nanoreinforcements have been used to improve mechanical and barrier properties of biopolymers, whose performance is usually poor when compared to those of synthetic polymers. Nanocomposite edible films have been developed by adding cellulose nanofibers (CNF) in different concentrations (up to 36 g/100 g) as nanoreinforcement to mango puree based edible films. The effect of CNF was studied in terms of tensile properties, water vapor permeability, and glass transition temperature (T(g)) of the nanocomposite films. CNF were effective in increasing tensile strength, and its effect on Young's modulus was even more noticeable, especially at higher concentrations, suggesting the formation of a fibrillar network within the matrix. The addition of CNF was also effective to improve water vapor barrier of the films. Its influence on T(g) was small but significant. The study demonstrated that the properties of mango puree edible films can be significantly improved through CNF reinforcement.