Search

This study was the first to evaluate the influence of the combination strategies of flavor addition and microwave-assisted thermal sterilization (MATS) processing for salt reduction implications. In freshly prepared mashed potatoes, a 30% and 50% salt reduction (w/w) in comparison to a 100% salt sample with three flavor variations (no additional flavor, garlic, and pepper) were investigated. Also, using the ideal profile method (IPM), the influence of MATS versus retort processing, in comparison to a freshly prepared sample, and flavor addition on mashed potato sensory properties and acceptance was investigated. Chemical characterization using the electronic tongue for nonvolatile compounds and headspace solid-phase microextraction (HS-SPME)/gas chromatography-mass spectrometry (GC-MS) for volatile analysis was completed. IPM revealed the ideal data were consistent at both the panel and consumer levels from a sensory and hedonic perspective. Results demonstrated the ideal mashed potato product would remain low in bitterness but have more intense pepper and potato aromas and flavors than the current samples evaluated. The salt level could be reduced by 50% while still maintaining flavor and overall acceptance in freshly prepared samples, but this was accompanied by a loss in saltiness intensity perception. The saltiness intensity was not different from the freshly prepared samples when processed via MATS but was different when processed by the retort. For chemical characterization, the electronic tongue showed a high discrimination index (>89%) and correlated highly (>0.8) with many sensory attributes. As salt concentration in the mashed potatoes decreased, the recovery of volatile compounds decreased. The present work contributes to the understanding of product reformulation for the purpose of salt reduction. PRACTICAL APPLICATION: Product developers need strategies to bring salt down to target levels while maintaining consumer acceptance. The combination strategies of flavor addition and MATS processing may allow for a new strategy to assist product developers in reaching salt reduction targets. Furthermore, developers should bear in mind that noticeable intensity differences may not alter the preference for the product. Thus, intensity differences that result in changes in acceptance should be the focus of quality insurance rather than utilizing just noticeable differences., (© 2020 Institute of Food Technologists®.)

Aged cheese is an increasingly popular dairy product. One approach to reduce Cheddar cheese maturation time is by utilizing elevated temperature, despite potential problems including development of imbalanced or off-flavors and negative changes in texture. Therefore, the objective of this study was to evaluate the influence of elevated ripening temperature on chemical and sensory properties of aged white Cheddar cheese. White Cheddar cheese was aged at 7.2, 10, or 12.8 °C for 12 months, with samples evaluated at 2, 5, 8, 10, 11, and 12 months by a trained sensory panel (n = 10). Two consumer sensory panels (n = 120) assessed 8- and 12-month aged cheese for comparison to a commercially available reference sample of the same cheese, aged for 12 months. An electronic tongue methodology was developed for analysis of nonvolatile compounds. Trained panel results showed that 2-month cheeses were described by milkfat flavor and sweet taste, 5-month cheeses were described by nutty aroma and white color, and 8-, 10-, 11-, and 12-month cheeses developed aged characteristics, such as umami and bitter tastes, brothy aroma, and aged flavor. Consumer panel results showed similar overall liking scores for the reference cheese and cheeses aged at 10 or 12.8 °C for both evaluations. The electronic tongue could classify samples according to aging month with a validity value of 92.59%. In conclusion, the electronic tongue served as a valid method of instrumental analysis for Cheddar cheese samples throughout maturation. This study demonstrated that aging white Cheddar cheese for 8 months at an elevated storage temperature of 10 °C produced cheese similar in consumer acceptance to that aged at 7 °C for 12 months. PRACTICAL APPLICATION: This study showed that aged white Cheddar storage at a higher temperature was perceived similarly by consumers as one stored for 1 year at a slightly lower temperature. This may be useful to those in the dairy industry exploring ways to accelerate aging, reducing devoted resources, while still producing an acceptable product. Also, the electronic tongue was effective at distinguishing among aged white Cheddar cheese samples showing another application for this technology., (© 2020 Institute of Food Technologists®.)

Determining the impacts of extrusion conditions on extrudate characteristics of whole beans flours is critical to find the suitable types of beans to use for making direct expanded products. Whole bean flours of four different bean types, faba, lima, pinto, and red kidney, were extruded. The influence of barrel temperature (120, 140, and 160 °C), moisture content (17%, 21%, and 25%), and screw speed (150, 200, and 250 rpm) on process and product responses was studied with a corotating twin screw extruder. The barrel temperature, moisture content, screw speed, and variety of bean had significant influence on process and product responses, back pressure (MPa), torque (N·m), specific mechanical energy (kJ/kg), expansion ratio, water absorption index (g/g), and water solubility index (%) (P < 0.05). Faba bean extrudates had a significantly higher expansion ratio compared to other beans (lima, pinto, and red kidney beans) even though faba bean contained significantly higher protein and higher crude fiber contents (P < 0.05). PRACTICAL APPLICATION: The outputs of this research will be helpful to the food industry in the production of high nutrient-dense food products from whole beans by maintaining the expansion and texture of the products. The data should assist to choose the suitable types of whole bean flours and the optimum processing conditions for making direct expanded extruded products., (© 2019 Institute of Food Technologists®.)

Rheological properties of food materials are important as they influence food texture, processing properties, and stability. Rotational rheometry has been widely used for measuring rheological properties. However, the measurements obtained using different geometries and rheometers are generally not compared for precision and accuracy, so it is difficult to compare data across different studies. In this study, nine rheometers from seven laboratories were used to measure the viscosity and viscoelastic properties of a commercial salad dressing. The measurements were obtained at three temperatures (8, 25, and 60 °C) using different diameter parallel plates (20, 40, 50, and 60 mm). Generally, the viscosity measurements among rheometers differed significantly ( P < 0.05 ). For larger geometry diameter (40, 50, and 60 mm) and at lower temperatures (8 °C), viscosity measurements at lower shear rate (0.01, 0.1, and 1.0 s -1 ) were significantly different. Rheometer brand significantly affected storage modulus only at low (0.01%) and high levels (10% and 100%) of strain. Temperature was an influencing factor on viscoelastic behaviors only at high strain (>10%). Storage moduli values obtained by frequency sweeps were not affected by rheometer or plate diameter. Overall, rheometer, geometry, and temperature can influence rheological measurements and care should be taken when comparing data across laboratories or published works. Higher shear rates (≥10 s -1 ) and moderate strains (0.1% to 10%) generally provide more repeatable data among different laboratories. PRACTICAL APPLICATION: This study provides information on what factors may potentially influence rheological measurements conducted across different laboratories. It is useful for rheometer users who want to compare their experimental data to published data or compare two sets of published data. It is better to compare data collected at shear rates 10 s -1 and strains between 0.1% and 1.0%., (© 2019 Institute of Food Technologists®.)

Metal oxide coated multilayered polymeric pouches provide a suitable alternative to foil-based packaging for shelf-stable products with extended shelf-life. The barrier performance of these films depends upon the integrity of the metal oxide coating which can develop defects as a result of thermal processing and improper handling. In this work, we developed a methodology to visually identify these defects using an oxygen-sensitive model gel system. Four pouches with different metal oxide coatings: MOA (Coated PET), MOB (SiO x -coated PET), MOC (Overlayer-AlO x -Organic-coated PET), MOD (Overlayer-SiO x -coated PET) were filled with water and retort-processed for 30 and 40 min at 121 °C. After processing, the pouches were cut open, dried and subsequently filled with a gel containing methylene blue that changes color in the presence of oxygen. The pouches were then stored at 23 and 40 °C for 180 and 90 days, respectively. Defects were identified by observing the localized color change from yellow to blue in the packaged gel. These observations were confirmed through measurement of oxygen and water vapor transmission rates, as well as SEM and CLSM analyses. The MOC pouches showed the least change in barrier properties after thermal processing. This was due to crosslinking in the organic coating and protection provided by the overlayer. The melting enthalpy of all films increased significantly (P < 0.05) after sterilization. This may increase the brittleness of the substrates after processing. Findings may be used to improve the barrier performance of metal oxide coated polymeric films intended for food packaging applications. PRACTICAL APPLICATION: In this study, we developed a methylene blue-based, oxygen-sensitive model gel system to identify defects in metal oxide coated polymeric structures induced by thermal processing and mechanical stresses. We also performed a comprehensive analysis of these defects through CLSM and SEM. The gel system and methodology developed may be useful in the design and development of high barrier metal oxide coated films., (© 2019 Institute of Food Technologists®.)

The consumption of spicy food products has increased, resulting in an increased demand for these products. The sensory evaluation of foods containing spicy compounds provides challenges due to their trigeminal innervation and associated sensory fatigue. Thus, for the routine evaluation of spices, a need exists for rapid and objective methods of analysis; the electronic tongue (e-tongue) provides a potential solution. The objective of this study was to evaluate the ability of the e-tongue to distinguish among spicy compounds at varying concentrations. Due to the diversity of spicy compounds, seven spicy compounds were selected: capsaicin, thymol, piperine, zingerone, p-cymene, menthol, and eugenol. For each of these compounds, a low concentration (1.427 × 10 -5 to 0.85 mg/L), medium concentration (2.854 × 10 -5 to 1.49 mg/L), and high concentration (0.0133 to 30.5 mg/L) were analyzed by the e-tongue. For each compound, the e-tongue discriminated among the concentrations with discrimination indices between 72% to 84%. Based on the responses of the e-tongue sensors, the samples formed three clusters. Cluster 1 contained menthol, eugenol, and p-cymene, cluster 2 contained capsaicin and thymol, and cluster 3 contained piperine and zingerone. Same-different sensory testing was completed on a representative sample from each cluster. Untrained consumers (n = 80) distinguished among the three clusters, verifying the clusters identified by the e-tongue. These results demonstrated that the e-tongue could be applicable in product development and the routine evaluation of spicy products. PRACTICAL APPLICATION: As the e-tongue differentiated among spicy compounds in an effective manner, it could be used instead of or alongside sensory evaluation when evaluating spicy compounds to reduce sensory fatigue associated with routine testing. Utilizing the e-tongue for spicy products will be an important area of research as the market for such products continues to grow., (© 2019 Institute of Food Technologists®.)

This study was the first to evaluate the influence of herb addition in a complex food matrix processed by microwave-assisted thermal sterilization (MATS) system for potential salt reduction implications. In a chicken pasta meal, salt concentrations included 100% (full salt) and reduced salt variations (75%, 50%, and 25% of the original salt concentration) and for each meal, a version with and without herb addition. The influence of storage time on sensory perception and acceptance was investigated, along with the odor-induced saltiness enhancement (OISE). Trained sensory panel results showed that the addition of herbs to the chicken pasta meal increased the intensity of many flavors and led to an increased saltiness perception, demonstrating their congruency with salty taste. The addition of herbs allowed for a 50% salt reduction in a processed prepared meal while maintaining the same intensity of saltiness perception as determined by a trained panel and overall meal acceptance by consumers. The OISE was only significant for the 25% salt meal (P < 0.05) suggesting that the influence of herb addition on saltiness perception at lower salt concentrations was more influential than at higher salt concentrations. Over longer storage times, meals processed by MATS and stored at ambient temperature increased in aroma, taste, and flavor intensities as well as in acceptance of many meal attributes. This study contributed an additional strategy of product reformulation, specifically herb addition, to the portfolio of salt-reduction strategies for prepared meals using MATS. PRACTICAL APPLICATION: The addition of herbs to prepared meals (chicken pasta) may allow for up to a 50% reduction in salt content while maintaining the same saltiness intensity perception and overall consumer acceptance. This has important implications for the food industry as sodium reduction is a complex task. Furthermore, the additional herbs utilized in this study increased the intensity of certain aromas and flavors, and led to increased saltiness perception; these herbs could be considered in future salt reduction applications as this study demonstrates their congruency with salty taste., (© 2019 Institute of Food Technologists®.)

Oak wood is used in barrels for wine aging. During aging, polyphenols are transferred from the barrels to the liquid. Although the bioactivity of oak polyphenols in wines has been extensively studied, no investigation exists on their toxicological properties, which limits their use as functional safe ingredients for other products. In this work, the chemical composition of a polyphenolic extract of Quercus crassifolia bark (QCBe) was studied by GC-MS. Its antibacterial properties on probiotic and pathogenic bacteria and its subacute-oral toxicity were determined as a way to understand the potential impact from its addition to fermented food as a functional ingredient. QCBe shows a selective inhibition of Escherichia coli compared with Lactobacillus bulgaricus and Streptococcus thermophylus. According to the toxicity evaluation, the subacute no-observed-adverse-effect-level was achieved at 11 mg/kg bw/day, whereas the subacute lowest-observed-adverse-effect-level for kidney damage was at 33 mg/kg bw/day. These results suggest that, given the fact an adverse effect was observed after subacute administration of this extract, further longer term toxicological studies are needed to provide sufficient safety evidence for its use in humans. PRACTICAL APPLICATION: Mexico's yogurt market is growing which creates opportunities for the development of some yogurt products as functional foods. As a first step to evaluate its potential use in yogurt formulation, the antibacterial effect of a Quercus crassifolia polyphenolic extract (QCBe) on probiotic bacteria and its subacute-oral toxicity in rats were studied. A low inhibition on probiotic bacteria growth was observed after QCBe addition to Lactobacillus bulgaricus and Streptococcus thermophylus cultures. Exposure to QCBe for a subacute duration resulted in renal injury in rats at dosages greater than or equal to 33 mg/kg/bw/day. This adverse effect indicates the importance of performing further long-term toxicological assessments prior to the addition of QCBe to a food like yogurt, which is regularly eaten by consumers., (© 2019 Institute of Food Technologists®.)

Evaluating sensory properties of spicy foods can be challenging due to how quickly individuals experience fatigue. Analytical methods, such as HPLC quantification of capsaicin, are accurate. However, they may not always be interchangeable with perception of spiciness by consumers. The electronic tongue (e-tongue) offers a unique opportunity to simulate human perception of capsaicin pungency with an analytical method. This study evaluated consumer's and the e-tongue ability to discriminate among paneer cheese samples containing different levels of capsaicin (1.875, 3.75, 7.5, 15, and 30 ppm). Over 2 days, using a blocked design to minimize fatigue, consumers (n = 110) evaluated samples using a difference from control sensory test. Consumers distinguished the spicy paneer sample from the control (0 ppm) at 3.75, 7.5, 15, and 30 ppm (P < 0.05). Differences were found among sample 3.75, 7.5, and 15 ppm (P < 0.05). However, no significant differences were found between control and 1.875 ppm or between samples 15 and 30 ppm. Although these high and low concentrations were challenging for consumers, the e-tongue resulted in a high degree of discrimination of 93% among all samples. On the principal component analysis plot created by the e-tongue, PC1 explained 85.6% of the variability and was associated with spicy, sweet, salty, sour, and umami sensors. PC2 explained 7.96% and was associated with the bitter and metallic sensors. The 3.75 and 15 ppm samples were defined by PC1, while PC2 defined samples 1.875 and 30 ppm. These results conclude that the e-tongue may be useful in qualitative discrimination among spicy paneer along with sensory evaluation. PRACTICAL APPLICATION: As the market for spicy foods continues to grow, methods for rapid, accurate analysis of the sensory qualities of the food products is needed. As the electronic tongue discriminated effectively among spicy paneer cheese samples, the method could be used alongside sensory testing to evaluate spicy food samples without encountering the typical issues of fatigue common with evaluating spicy foods., (© 2019 Institute of Food Technologists®.)

Proper food safety training is essential to decrease incidences and overall rates of foodborne illnesses and outbreaks. Though many commercial restaurants should provide proper food safety training to food handler employees, this training is not always offered or effective. Here, we summarize the results of a primary literature study concerning the effectiveness of food safety training in commercial settings. The literature chosen for review contained only studies with experimental food safety training, with before and after training data. Through evaluation of these studies, the best practice for ensuring effective training and follow-through were the use of food safety training programs, which incorporated both knowledge and behavior-based training. PRACTICAL APPLICATION: Food safety managers in food service establishments may consider reevaluating their current food safety training program to incorporate behavioral-based food safety training in addition to knowledge-based training., (© 2019 Institute of Food Technologists®.)

In this study, we developed a fluorescence method to quantify oxygen barrier properties for wall materials used in microencapsulation of oxygen-sensitive compounds. We used a reversible, oxygen quenching dye, tris (4,7-diphenyl-1, 10-phenanthroline) ruthenium(II) dichloride complex, as a marker to monitor oxygen transport across spray-dried and freeze-dried Hi-cap100 and maltodextrin microspheres. We fit the rate of oxygen transport to Fick's second law and extrapolated an effective oxygen diffusion coefficient Deff. Results show that the Deff for spray-dried maltodextrin and Hi-cap100 formulations were in the range of 6.46 × 10 -15 to 7.45 × 10 -15  m 2 /s and 16.0 × 10 -15 to 22.4 × 10 -15 m 2 /s, respectively. Results also show an increasing trend in thiobarbituric acid reactive substances reaction rate constants, with an increasing D eff for each formulation. Additionally, freeze-dried maltodextrin formulations had significantly higher D eff (31.1 × 10 -15 to 36.0 × 10 -15 m 2 /s) compared to spray-dried matrices due to a more porous morphology. This new method provides a framework for the in situ estimation of D eff for wall materials in microspheres. Potential applications include the design and selection of wall materials for maximum oxidative stability of encapsulated ingredients. PRACTICAL APPLICATION: Currently, the selection of wall materials used in microencapsulation of lipids takes a trial-and-error approach, which can be time consuming and prone to error. In this study, we developed a new methodology to directly assess the oxygen barrier properties of wall materials in microspheres. This method can be used by food scientists to screen wall materials in order to optimize the oxidative stability of encapsulated lipids., (© 2019 Institute of Food Technologists®.)

We present a Descriptive Analysis (DA) of a large representative sample (24 whiskeys) of two legally distinct types of American whiskeys: bourbon and rye whiskey (respectively distilled from a fermented "mashbill" of at least 51% corn or rye). We wanted to determine whether a trained panel could find sensory differences between these two products. We used standard DA: 11 judges were trained for 10 hours to develop a lexicon of 24 flavor, taste, and mouthfeel descriptors for the 24 whiskey samples (15 bourbons and 9 ryes). Then, subjects rated each whiskey sample on each attribute, using unstructured line scales, in standard good sensory-evaluation conditions, and in triplicate. Results were analyzed using MANOVA, Barycentric Discriminant Analysis, and Hierarchical Cluster Analysis. Overall, while 10 descriptors significantly differentiated the whiskeys, no attribute or combination of attributes was predicted by mashbill: The judges did not find differences in sensory character between bourbon and rye whiskeys as categories. However, significant differences could be attributed to the producer of the whiskey and to age at bottling. These results are important because American whiskey has recently become staggeringly popular, and because there is a consistent belief that bourbon and rye whiskeys-as categories-have distinct sensory characteristics. PRACTICAL APPLICATION: This research contradicts popular and expert beliefs about the distinction between the popular and important American rye and bourbon whiskeys. A comprehensive sensory DA study of 24 American whiskeys with different mashbills (9 ryes and 15 bourbons) shows that-while each whiskey is individually distinct on a number of sensory dimensions-sensory differences between rye and bourbon whiskeys as product categories cannot be predicted by mashbill. For producers, consumers, and researchers, this research points to the need for new theories on the origins of flavors in whiskey, as it is now clear that the grain content alone cannot predict sensory qualities., (© 2019 Institute of Food Technologists®.)

Replacement of NaCl with other salts is becoming increasingly common as part of a salt reduction strategy, but these salts may confer unwanted sensory changes. Therefore, the objective of this study was to determine the relationship between consumer perception and electronic tongue detection of different salts and their mixtures currently used in salt reduction. NaCl and replacement salts (KCl and CaCl 2 ) were identified, and using mixture design methodology, mixtures (n = 10) were prepared in aqueous solutions and validated in tomato soup. A potentiometric electronic tongue, panelists with orientation (n = 30), and a consumer panel (n = 94 - solutions; n = 100 - soups) were used to evaluate the samples. Significant differences were found between salt mixtures in solutions and soups by both panelists and consumers (P < 0.05). Electronic tongue analysis showed a high discrimination index (D.I. = 96%) indicating distinct differences among the salt mixtures, and strong positive correlations (R 2 > 0.90) were found between sensory and electronic tongue data. Upon application of contour plots and desirability function analysis, an optimal replacement value was identified as one containing 96.4% NaCl, 1.6% KCl, and 2.0% CaCl 2 . Additional salt blends could be created to continue to reduce NaCl and increase the other two salts, for further potential health benefits, without significantly impacting predicted acceptance scores. Results from this study indicate the potential for the electronic tongue, sensory evaluation, and mixture design methodology to work together during product reformulations to achieve salt reduction targets. PRACTICAL APPLICATION: The results show that salt mixtures vary in perception and acceptance in different matrices, and thus should be evaluated on a product by product basis. With its ability to discriminate among various salts, the application of the electronic tongue could be useful for industry in the development of products with different salt formulations to reduce NaCl within processed foods. Additionally, mixture design can help find a predicted optimum mixture for the product under investigation., (© 2019 Institute of Food Technologists®.)

This study examined the quality of fresh pasta made from 3 varieties of a new type of durum wheat possessing soft kernel texture, as compared to fresh pasta made from commercial samples of durum semolina, durum flour, and bread flour, each at 3 levels of hydration (28%, 30%, and 32%, respectively). Soft durum possesses a small part of chromosome 5D that carries the Hardness locus and puroindoline genes. The soft durum lines were derived from the durum varieties Svevo, Alzada, and Havasu. The soft durum pasta exhibited low cooking weight increase (water uptake) (115% to 122%), the lowest cooking loss (∼3% to 4%), high firmness (269.3, 265.8, and 297.9 g, Soft Svevo, Soft Havasu, and Soft Alzada, respectively, versus 239.7 and 273.6 g, durum flour and semolina, respectively), low stickiness (4.17 to 4.96 g·s for the soft durums compared with 5.04 for the semolina), and raw and cooked pasta color comparable to or superior to those exhibited by the durum semolina (high L * and b * ). The soft durum samples also exhibited pasta quality superior to both the durum flour and bread flour samples. These results challenge the long-standing view that high-quality pasta must be made from durum semolina. PRACTICAL APPLICATION: This study illustrates the quality and potential applications of soft durum wheat in pasta manufacturing. As a new type of wheat, understanding these properties is crucial for manufacturers and others who may be interested in utilizing soft durum., (© 2018. This article is a U.S. Government work and is in the public domain in the USA.)

Expansion characteristics of cornstarch-based extrudates incorporating fiber-rich food processing byproducts was explored. Waxy and regular cornstarch were used as the base materials with apple pomace and sugarcane bagasse incorporated at two addition levels (0%, 15%, and 30% w/w). Extrusions were conducted at three different screw speeds (150, 200, and 250 rpm) with other parameters optimized and kept constant. Apple pomace inclusion resulted in higher initial expansion index (4.23 to 5.60) and higher stable expansion index (2.76 to 4.43), but also showed higher shrinkage (8.50% to 34.72%) than sugarcane bagasse extrudates at the same inclusion levels. Inclusion of apple pomace showed potential of producing extrudates with significantly higher expansion than cornstarch control, with relatively lower energy inputs. Extrusion methods used here have the potential to preserve the textural quality and nutritional value of the fiber-enriched extrudates, providing the base for healthier snack food items., Practical Application: Findings from this study can be extended to the other fiber-rich food processing byproducts, such as other fruit and vegetable pomace, cereal brans, and pulse hulls among other materials. This data will help the development of fiber-enriched extruded snacks that would have favorable consumer traits., (© 2018 Institute of Food Technologists®.)

A wide range of fiber-rich food processing byproducts from various sources have been proposed as value-added ingredients for producing healthier food products. Characterizing their composition and physicochemical properties is crucial to understand their potential uses. Eight fiber-rich byproducts from different sources were fractionated into 2 different particle-size ranges. Different (P ≤ 0.05) proximate composition and physicochemical properties (pasting properties, water-binding capacity, and oil-binding capacity) were exhibited by them. These properties enabled hierarchical cluster analysis and principal component analysis to group the byproducts into 3 different clusters by functionality and from this, assigned ingredients in each cluster to a potential end-uses. Some end use examples include, as a source of fat, protein, sugar, and insoluble fiber; and for uses as a thickening agent, water-binder, emulsion-enhancer, and fat-binder., Practical Application: The data presented in this study can be used by food manufacturers and product developers as the basis for choosing fiber-rich byproducts for specific applications and assist them in developing specific formulation and processing strategies. This characterization will reduce the time for development of fiber-rich foods, increasing industrial uses of byproducts, and decreasing food waste., (© 2018 Institute of Food Technologists®.)

The shelf life of pasteurized milk is generally determined through microbiological analysis. The objective of this study was to correlate microbial quality parameters then to design predictive models for shelf life of pasteurized milk. We analyzed pasteurized milk (3.9% fat) for aerobic plate counts (APCs), psychrotrophic bacteria counts (PBCs), and Bacillus spp. counts at 5, 7, 10, 13, 15, and 19 (±1 °C) to the end of storage time. We also monitored titratable acidity, pH, and, lipase, and protease activity and correlated this with APC, which is the principal index defining shelf life. Results indicate that the shelf life of pasteurized milk was 24, 36, and 72 h at 19, 15, and 13 °C respectively, as determined by APC and acidity indicators. However, milk stored at lower temperatures of 5, 7, and 10 °C had longer shelf life of 30, 24, and 12 d, respectively. A sharp increase in titratable acidity, while decrease pH were observed when APCs reached 5.0 log 10 CFU/mL at all storage temperatures. Lipase and protease activities increased with storage temperature. At 5 and 7 °C, however, protease activity was very low. Therefore, we eliminated this parameter from our quality parameters as a potential spoilage indicator., Practical Application: Findings of this research are useful for monitoring the quality of commercial pasteurized milk, particularly in locations where environmental conditions make longer storage difficult. The study also provides valuable information for development of colorimetric shelf life indicators., (© 2018 Institute of Food Technologists®.)

Cold-smoked salmon (CSS) production lacks a validated kill step for Listeria monocytogenes. Although Listeria spp. are reduced by nisin or high-pressure processing (HPP), CSS muscle discoloration is often observed after HPP. Effects of nisin and low-temperature HPP on L. innocua survival (nonpathogenic surrogate for L. monocytogenes), spoilage organism growth, color, and sensory preference and peelability of CSS were studied. Cold-smoked sockeye salmon (Oncorhynchus nerka) fillets ± nisin (10 μg/g) were inoculated with a 3-strain L. innocua cocktail, vacuum-packaged, frozen at - 30 °C, and high-pressure processed in an ice slurry within an insulated sleeve. Initial experiments indicated that nisin and HPP for 120 s at 450 MPa (N450) and 600 MPa (N600) were most effective against L. innocua, and thus were selected for further storage studies. L. innocua in N450 and N600-treated CSS was reduced 2.63 ± 0.15 and 3.99 ± 0.34 Log CFU/g, respectively, immediately after HPP. L. innocua and spoilage growth were not observed in HPP-treated CSS during 36 d storage at 4 °C. Low-temperature HPP showed a smaller increase in lightness of CSS compared to ambient-temperature HPP performed in previous studies. Sensory evaluation indicated that overall liking of CSS treated with N450 and N600 were preferred over the control by 61% and 62% of panelists, respectively (P < 0.05). Peelability of sliced CSS was reduced by HPP (P < 0.05). Nisin in combination with low-temperature HPP was effective in controlling L. innocua in CSS while maintaining consumer acceptability., Practical Application: Cold-smoked salmon is a high-risk ready-to-eat product that may be contaminated with L. monocytogenes. Results showed that nisin combined with high-pressure processing at low temperature, reduced the population of Listeria and controlled the spoilage organisms during storage. As an added benefit, high-pressure processing at low temperature may reduce lightening of the salmon flesh, leading to enhanced consumer preference., (© 2017 Institute of Food Technologists®.)

The combination of ultrasound and mild temperatures to process fruits and vegetables juices is a novel approach that is showing promising results for microbial inactivation and preservation of bioactive compounds and sensory attributes. This study centers on investigating the inactivation of Escherichia coli (ATCC 11755) in carrot juice as a result of the combined effect of ultrasound (24 kHz frequency, 120 μm, and 400 W) with temperature (50, 54, and 58 °C) and processing time (0 to 10 min). In addition, the possible changes in physicochemical properties and the retention of bioactive compounds after processing were analyzed. Microbial inactivation with ultrasound treatment at 50 °C resulted in 3.5 log reduction after 10 min, whereas at 54 °C almost 5 log reduction was attained in the same period of time; meanwhile, for treatment at 58 °C, no viable cells were detected (>5 log reduction) after 2 min. There was no significant difference (P > 0.05) on pH (6.80 to 6.82), °Brix (8.0 to 8.5), titratable acidity (0.29% to 0.30%), total carotenoid (1774 to 1835 μg/100 mL), phenolic compounds (20.19 to 20.63 μg/mL), ascorbic acid (4.8 mg/100 mL), and color parameters between fresh and ultrasound treated samples at the studied temperatures. To predict the inactivation patterns, observed values were tested using 3 different general models: first-order, Weibull distribution, and biphasic. The Weibull and biphasic models show good correlation for inactivation under all processing conditions. Results show ultrasound in combination with mild temperature could be effectively used to process fresh carrot juice providing a safe product without affecting physicochemical characteristics., Practical Applications: The combination of ultrasound and mild temperatures is effective in reducing microbial load in carrot juice to safe levels. This combination would be beneficial in the industrial processing of carrot juice without altering the quality attributes or bioactive compounds., (© 2017 Institute of Food Technologists®.)

Starch characteristics significantly influence the functionality and end-use quality of cereals and pseudo-cereals. This study examined the composition and properties of starch from 11 pure varieties and 2 commercial samples of quinoa in relationship to the texture of cooked quinoa. Nearly all starch properties and characteristics differed among these samples. Results showed that total starch content of seeds ranged from 53.2 to 75.1 g/100 g apparent amylose content ranged from 2.7% to 16.9%; total amylose ranged from 4.7% to 17.3%; and the degree of amylose-lipid complex ranged from 3.4% to 43.3%. Amylose leaching ranged from 31 mg/100 g starch in "Japanese Strain" to 862 mg/100 g starch in "49ALC." "Japanese Strain" starch also exhibited the highest water solubility (4.5%) and the lowest swelling power (17). α-Amylase activity in "1ESP," "Col.#6197," "Japanese Strain," "QQ63," "Yellow Commercial," and "Red Commercial" (0.03 to 0.09 CU) were significantly lower than the levels of the other quinoa samples (0.20 to 1.16 CU). Additionally, gel texture, thermal properties, and pasting properties of quinoa starches were investigated. Lastly, correlation analysis showed that the quinoa samples with higher amylose content tended to yield harder, stickier, more cohesive, more gummy, and more chewy texture after cooking. A higher degree of amylose-lipid complex and amylose leaching were associated with softer and less chewy cooked quinoa TPA texture. Higher starch enthalpy correlated with firmer, more adhesive, more cohesive, and chewier texture. In sum, starch plays a significant role in the texture of cooked quinoa., Practical Application: The research determined starch characteristics among a diverse set of pure quinoa varieties and commercial samples, and identified the relationships between starch properties and cooked quinoa texture. The results can help breeders and food manufacturers to understand better the relationships among quinoa starch characteristics, cooked quinoa texture, and the best use of different cultivars., (© 2017 Institute of Food Technologists®.)

Hummus (chickpea dip) is a ready-to-eat product that may pose a significant risk to human if pathogens are present. Several organisms including Shigella spp. have been isolated from hummus. However, studies on the survival and inhibition of Shigella spp. in food are scarce. This study investigated the growth pattern of Sh. sonnei and Sh. flexneri in hummus at different temperatures (4, 10, and 24 °C). Additionally, the inhibitory activity of different concentrations of citric acid (CA) (0.5%, 1.0%, and 2.0%) and garlic extract (GE) (1.0%, 2.0%, and 3.0%) against Sh. sonnei and Sh. flexneri inoculated into hummus and stored at 4 and 10 °C was investigated. Both Shigella spp. survived well at 4 °C, while both grew to >7.0 log 10 after 4 d at 10 °C or 1 d at 24 °C. At 4 °C, CA at 0.5% and 1.0% resulted in a slight reduction in the count (approximately 1.0 log 10 ); a complete elimination of Sh. sonnei was attained by using 2.0% CA. However, approximately 3.0 log 10 reduction in Sh. sonnei was obtained at 10 °C. For Sh. flexneri, CA at 0.5% and 1.0% resulted in a bacteriostatic inhibition. GE at 1.0% and 2.0% resulted in approximately 1.0 to 2.0 log 10 reduction in Sh. sonnei count at 4 °C, while at 3.0% GE, approximately 4.0 and 3.0 log 10 reductions were obtained at 4 and 10 °C, respectively. In comparison, the 2.0% and 3.0% GE resulted in a bacteriostatic effect against Sh. flexneri at 4 and 10 °C., (© 2017 Institute of Food Technologists®.)

Development and selection of model foods is a critical part of microwave thermal process development, simulation validation, and optimization. Previously developed model foods for pasteurization process evaluation utilized Maillard reaction products as the time-temperature integrators, which resulted in similar temperature sensitivity among the models. The aim of this research was to develop additional model foods based on different time-temperature integrators, determine their dielectric properties and color change kinetics, and validate the optimal model food in hot water and microwave-assisted pasteurization processes. Color, quantified using a * value, was selected as the time-temperature indicator for green pea and garlic puree model foods. Results showed 915 MHz microwaves had a greater penetration depth into the green pea model food than the garlic. a * value reaction rates for the green pea model were approximately 4 times slower than in the garlic model food; slower reaction rates were preferred for the application of model food in this study, that is quality evaluation for a target process of 90 °C for 10 min at the cold spot. Pasteurization validation used the green pea model food and results showed that there were quantifiable differences between the color of the unheated control, hot water pasteurization, and microwave-assisted thermal pasteurization system. Both model foods developed in this research could be utilized for quality assessment and optimization of various thermal pasteurization processes., (© 2017 Institute of Food Technologists®.)

Objective of this study was to understand the impacts of cellulose fiber with different particle size distributions, and starches with different molecular weights, on the expansion of direct expanded products. Fiber with 3 different particle size distributions (<125, 150 to 250, 300 to 425 μm) and 4 types of starches representing different amylose contents (0%, 23%, 50%, and 70%) were investigated. Feed moisture content (18 ± 0.5 % w.b) and extruder temperature (140 °C) were kept constant and only the extruder screw speed was varied (100, 175, and 250 rpm) to achieve different specific mechanical energy inputs. Fiber particle size and starch type significantly influenced the various product parameters. In general, the smaller fiber particle size resulted in extrudate with higher expansion ratio. Starch with an amylose: amylopectin ratio of 23:77 resulted in highest expansion compared to the other starches, when no fiber was added. Interestingly, starch with 50:50, amylose: amylopectin ratio in combination with smaller fiber particles resulted in product with significantly greater expansion than the control starch extrudates. Aggregation of fiber and shrinkage of surface was observed in the Scanning Electron Microscope images at 10% fiber level. The results suggest the presence of active interactions between the cellulose fiber particles and corn starch molecules during the expansion process. A better understanding of these interactions can help in the development of high fiber extruded products with better expansion., (© 2017 Institute of Food Technologists®.)

Quinoa is becoming increasingly popular, with an expanding number of commercially available varieties. To compare the sensory properties of these quinoa varieties, a common sensory lexicon needs to be developed. Thus, the objective of this study was to develop a lexicon of cooked quinoa and examine consumer acceptance of diverse varieties. A trained panel (n = 9) developed aroma, taste/flavor, texture, and color descriptors to describe the sensory properties of 21 quinoa varieties. In addition, texture of the cooked quinoa was determined using a texture analyzer. Results indicated that the developed lexicon could distinguish among these quinoa varieties, showing significant differences in aromas, taste/flavors, and texture attributes. Specifically, quinoa variety effects were observed for the aromas of caramel, nutty, buttery, grassy, earthy, and woody; taste/flavor of sweet, bitter, grain-like, nutty, earthy, and toasty; and firm, cohesive, pasty, adhesive, crunchy, chewy, astringent, and moist textures. Three varieties, "QQ74," "Linares," and "CO407D," exhibited an adhesive texture that has not been described in other commercialized quinoa. Subsequent consumer evaluation (n = 100) on 6 selected samples found that the "Commercial Red" sample was the most accepted overall whereas the least accepted was the field variety "QQ74." For all consumers, overall acceptance of quinoa was driven by higher intensities of grassy aroma, and firm and crunchy texture. Segmentation of the consumers into 4 groups was explored and showed that consumers varied in their acceptance of specific attributes, particularly texture. From the present study, the quinoa lexicon and key drivers of consumer acceptance can be utilized in the industry to evaluate quinoa varieties, product quality and processing procedures., (© 2017 Institute of Food Technologists®.)

In this study, snapshots of operating frequency profiles of domestic microwave ovens were collected to reveal the extent of microwave frequency variations under different operation conditions. A computer simulation model was developed based on the finite difference time domain method to analyze the influence of the shifting frequency on heating patterns of foods in a microwave oven. The results showed that the operating frequencies of empty and loaded domestic microwave ovens varied widely even among ovens of the same model purchased on the same date. Each microwave oven had its unique characteristic operating frequencies, which were also affected by the location and shape of the load. The simulated heating patterns of a gellan gel model food when heated on a rotary plate agreed well with the experimental results, which supported the reliability of the developed simulation model. Simulation indicated that the heating patterns of a stationary model food load changed with the varying operating frequency. However, the heating pattern of a rotary model food load was not sensitive to microwave frequencies due to the severe edge heating overshadowing the effects of the frequency variations., (© 2016 Institute of Food Technologists®.)

Extrusion of 2 quinoa varieties, Cherry Vanilla and Black (scarified and unscarified) and a mixed quinoa variety, Bolivian Royal (scarified and degermed) were studied for their extrusion characteristics. A corotating twin-screw extruder with a 3 mm round die was used. Feed moisture contents of 15%, 20%, and 25% (wet basis) were studied. The extruder barrel temperature was kept constant at 140 °C and screw speeds were varied from 100, 150, and 200 revolutions per minutes. Process responses (specific mechanical energy, back pressure, and torque) and product responses (expansion ratio, unit density, and water absorption index/water solubility index) were evaluated. The degermed Bolivian Royal showed the highest expansion in comparison to all other varieties, attributed to its significantly low levels of fat, fiber, and protein. The scarified Cherry Vanilla resulted in the lowest expansion ratio. This was attributed to the increase in the protein content from the removal of the outer layer. The results indicate that all the varieties performed differently in the extrusion process due to their modification processes as well as the individual variety characteristics., (© 2016 Institute of Food Technologists®.)

Wheat represents a ubiquitous commodity and although industries valorize 10% of wheat bran, most of this antioxidant-rich byproduct gets fed to livestock. The objective of this study was to incorporate wheat bran into an extruded snack. Bran samples from hard red spring, soft white club cv. Bruehl, and purple wheat lines were added to cv. Waxy-Pen wheat flour (Triticum aestivum L.) at replacement concentrations of 0%, 12.5%, 25%, and 37.5% (w/w; n = 10). Extrudates were evaluated for antioxidant capacity, color, and physical properties. Results showed that high fiber concentrations altered several pasting properties, reduced expansion ratios (P < 0.0001), and created denser products (P < 0.0001), especially for white bran supplemented extrudates. Purple bran supplemented extrudates produced harder products compared to white and red bran treatments (P < 0.0001). Extrudates produced with 37.5% (w/w) of each bran variety absorbed more water than the control with no added bran. The oxygen radical absorption capacity assay, expressed as Trolox Equivalents, showed that extrudates made with addition of red (37.5%) and purple (37.5%) bran had higher values compared to the other treatments; the control, red, and white bran treatments had less antioxidant activity after extrusion (P < 0.0001) compared to purple bran supplemented extrudates. Purple and red brans may serve as viable functional ingredients in extruded foods given their higher antioxidant activities. Future studies could evaluate how bran variety and concentration, extruded shape, and flavor influence consumer acceptance., (© 2016 Institute of Food Technologists®.)

The objective of this study was to determine if Chardonnay grape seed pomace (GSP), a waste stream of wine production, could be used as a functional ingredient in brewed coffee. Two consumer panels were conducted to assess the acceptance of coffee at coffee replacement (w/w) values of 0% (control), 6.25%, 12.50%, 18.75%, or 25% GSP. The 1st consumer panel (n = 80) assessed the coffee samples served "black." The 2nd panel (n = 67) assessed the coffee samples with adjustment (that is, sweeteners, milk, and cream) options available. Consumer sensory evaluation involved evaluating the 5 treatments individually for acceptance of appearance, aroma, taste/flavor, and overall acceptance using a 9-point hedonic scale. A check-all-that-apply questionnaire surveyed the sensory attributes describing aroma, appearance, and taste/flavor of the samples. Oxygen radical absorbance capacity was used to measure the effects of antioxidant levels in GSP coffee samples. Results showed that GSP could be added at 6.25% replacement without significantly affecting the overall consumer acceptance of coffee compared to the control (0% GSP). Above 6.25% GSP supplementation, the coffee beverage was described as more tan, milky, watery/dilute, and mild, and was generally less accepted by the consumers. GSP also increased the antioxidant capacity of the coffee compared to the control (0% GSP), with no significant differences among replacement values. Therefore, 6.25% GSP replacement is recommended for creating coffee beverages acceptable to consumers. Further in vivo investigation may substantiate the free-radical scavenging capacity of GSP coffee and its potential health benefits., (© 2016 Institute of Food Technologists®.)

We used a Fick's unsteady state diffusion equation to estimate the time required for a single spherical shaped bacterium (assuming Enterococcus faecium as the target microorganism) in low-moisture foods to equilibrate with the environment. We generated water sorption isotherms of freeze-dried E. faecium. The water activity of bacterial cells at given water content increased considerably as temperature increased from 20 to 80 °C, as observed in the sorption isotherms of bacterial cells. When the water vapor diffusion coefficient was assumed as between 10(-12) and 10(-10) m(2) /s for bacterial cells, the predicted equilibration times (teq ) ranged from 8.24×10(-4) to 8.24×10(-2) s. Considering a cell membrane barrier with a lower water diffusion coefficient (10(-15) m(2) /s) around the bacterial cell with a water diffusion coefficient of 10(-12) m(2) /s, the teq predicted using COMSOL Multiphysics program was 3.8×10(-1) s. This result suggests that a single bacterium equilibrates rapidly (within seconds) with change in environmental humidity and temperature., (© 2016 Institute of Food Technologists®)

The objective of this study was to assess the influence of the interaction among alcohol, tannins, and mannoproteins on the aroma, flavor, taste, and mouthfeel characteristics of selected commercial Merlot wines. Merlot wines (n = 61) were characterized for wine chemistry parameters, including pH, titratable acidity, alcohol, glucose, fructose, tannin profile, total proteins, and mannoprotein content. Agglomerative clustering of these physicochemical characteristics revealed 6 groups of wines. Two wines were selected from each group (n = 12) and profiled by a trained sensory evaluation panel. One wine from each group was evaluated using the electronic tongue (e-tongue). Sensory evaluation results showed complex effects among tannins, alcohol, and mannoproteins on the perception of most aromas, flavors, tastes, and mouthfeel attributes (P < 0.05). The e-tongue showed distinct differences among the taste attributes of the 6 groups of wines as indicated by a high discrimination index (DI = 95). Strong correlations (r(2) > 0.930) were reported between the e-tongue and sensory perception of sweet, sour, bitter, burning, astringent, and metallic. This study showed that interactions among wine matrix components influence the resulting sensory perceptions. The strong correlation between the e-tongue and trained panel evaluations indicated the e-tongue can complement sensory evaluations to improve wine quality assessment., (© 2016 Institute of Food Technologists®)

Pasta presents a challenge to microwave processing due to its unique cooking requirements. The objective of this study was to determine the effects of microwave processing on pasta physicochemical and mechanical properties. Fettuccine pasta was parboiled for selected times, then pasteurized using a Microwave Assisted Pasteurization System and stored under refrigeration for 1 wk. Samples were analyzed using microscopy, mechanical testing, and chemical analyses after storage. While no significant differences were observed for free amylose among fresh samples, samples parboiled for ≤6 min had significantly higher free amylose, suggesting reduced starch retrogradation. Increased heat treatment increased degree of protein polymerization, observed in microstructures as increased gluten strand thickness and network density. Firmness and extensibility increased with increased parboil time; however, extension data indicated an overall weakening of microwave-treated pasta regardless of total cooking time. Overall, microwave pasteurization was shown to be a viable cooking method for pasta., (© 2016 Institute of Food Technologists®)

Food safety is becoming an increasing concern in the United States. This study investigated the effects of ultraviolet-C (UV-C) light as a postpackaging bactericidal treatment on the quality of English cucumber packaged in polyethylene (PE) film. Escherichia coli k-12 was used as a surrogate microbe. The microbial growth and physical properties of packaged cucumbers were analyzed during a 28-d storage period at 5 °C. Inoculating packaged cucumbers treated at 23 °C for 6 min with UV-C (560 mJ/cm(2) ) resulted in a 1.60 log CFU/g reduction. However, this treatment had no significant effect (P > 0.05) on the water vapor transmission rate or oxygen transmission rate of the PE film. Results show that UV-C light treatment delayed the loss of firmness and yellowing of English cucumber up to 28 d at 5 °C. In addition, UV-C light treatment extended the shelf life of treated cucumber 1 wk longer compared to untreated cucumbers. Electron microscopy images indicate that UV-C light treatment influences the morphology of the E. coli k-12 cells. Findings demonstrate that treating cucumbers with UV-C light following packaging in PE film can reduce bacterial populations significantly and delay quality loss. This technology may also be effective for other similarly packaged fresh fruits and vegetables., (© 2016 Institute of Food Technologists®)

Temporal Check-All-That-Apply (TCATA) is a new dynamic sensory method for which analysis techniques are still being developed and optimized. In this study, TCATA methodology was applied for the evaluation of wine finish by trained panelists (n = 13) on Syrah wines with different ethanol concentrations (10.5% v/v and 15.5% v/v). Raw data were time standardized to create a percentage of finish duration, subsequently segmented into thirds (beginning, middle, and end) to capture panel perception. Results indicated the finish of the high ethanol treatments lasted longer (approximately 12 s longer) than the low ethanol treatment (P ≤ 0.05). Within each finish segment, Cochran's Q was conducted on each attribute and differences were detected amongst treatments (P ≤ 0.05). Pairwise tests showed the high ethanol treatments were more described by astringency, heat/ethanol burn, bitterness, dark fruit, and spices, whereas the low ethanol treatment was more characterized by sourness, red fruit, and green flavors (P ≤ 0.05). This study demonstrated techniques for dealing with the data generated by TCATA. Furthermore, this study further characterized the influence of ethanol on wine finish, and by extension wine quality, with implications to winemakers responsible for wine processing decisions involving alcohol management., (© 2016 Institute of Food Technologists®)

Bactericidal activity of neutral electrolyzed water (NEW), quaternary ammonium (QUAT), and lactic acid-based solutions was investigated using a manual spraying technique against Salmonella Typhimurium, Escherichia coli O157:H7, Campylobacter jejuni, Listeria monocytogenes and Staphylococcus aureus that were inoculated onto the surface of scarred polypropylene and wooden food cutting boards. Antimicrobial activity was also examined when using cutting boards in preparation of raw chopped beef, chicken tenders or salmon fillets. Viable counts of survivors were determined as log10 CFU/100 cm(2) within 0 (untreated control), 1, 3, and 5 min of treatment at ambient temperature. Within the first minute of treatment, NEW and QUAT solutions caused more than 3 log10 bacterial reductions on polypropylene surfaces whereas less than 3 log10 reductions were achieved on wooden surfaces. After 5 min of treatment, more than 5 log10 reductions were achieved for all bacterial strains inoculated onto polypropylene surfaces. Using NEW and QUAT solutions within 5 min reduced Gram-negative bacteria by 4.58 to 4.85 log10 compared to more than 5 log10 reductions in Gram-positive bacteria inoculated onto wooden surfaces. Lactic acid treatment was significantly less effective (P < 0.05) compared to NEW and QUAT treatments. A decline in antimicrobial effectiveness was observed (0.5 to <2 log10 reductions were achieved within the first minute) when both cutting board types were used to prepare raw chopped beef, chicken tenders or salmon fillets., (© 2016 Institute of Food Technologists®)

In consumer food-sensory studies, sorting and closely related methods (for example, projective mapping) have often been applied to large product sets which are complex and fatiguing for panelists. Analysis of sorting by Multi-Dimensional Scaling (MDS) is common, but this method discards relevant individual decisions; analysis by DISTATIS, which accounts for individual differences, is gaining acceptance. This research posits that replication can improve DISTATIS analysis by stabilizing consumer sensory maps, which are often extremely unstable. As a case study a fatiguing product set was sorted: 10 American whiskeys-5 bourbons and 5 ryes-were sorted into groups by 21 consumers over 2 replications. These products were chosen because American whiskeys are some of the most important distilled beverages in today's market; in particular, "bourbon" (mashbill more than 50% corn) and "rye" (more than 50% rye) whiskeys are important and assumed to be products with distinct sensory attributes. However, there is almost no scientific information about their sensory properties. Data were analyzed using standard and aggregated DISTATIS and MDS. No significant relationship between mashbill and consumer categorization in whiskeys was found; instead, there was evidence of producer and aging effects. aggregated DISTATIS was found to provide more stable results than without replication, and DISTATIS results provided a number of benefits over MDS, including bootstrapped confidence intervals for product separation. In addition, this is the first published evidence that mashbill does not determine sensory properties of American whiskey: bourbons and ryes, while legally distinct, were not separated by consumers., (© 2016 Institute of Food Technologists®)

This study aimed at modeling sodium chloride (NaCl) diffusion in foods during thermal processing using analytical and numerical solutions and at investigating the changes in NaCl concentrations during storage after processing. Potato, radish, and salmon samples in 1% or 3% NaCl solutions were heated at 90, 105, or 121 °C for 5 to 240 min to simulate pasteurization and sterilization. Selected samples were stored at 4 or 22 °C for up to 28 d. Radish had the largest equilibrium NaCl concentrations and equilibrium distribution coefficients, but smallest effective diffusion coefficients, indicating that a greater amount of NaCl diffused into the radish at a slower rate. Effective diffusion coefficients determined using the analytical solution ranged from 0.2 × 10(-8) to 2.6 × 10(-8) m²/s. Numerical and analytical solutions showed good agreement with experimental data, with average coefficients of determination for samples in 1% NaCl at 121 °C of 0.98 and 0.95, respectively. During storage, food samples equilibrated to a similar NaCl concentration regardless of the thermal processing severity. The results suggest that sensory evaluation of multiphase (solid and liquid) products should occur at least 14 d after processing to allow enough time for the salt to equilibrate within the product., (© 2016 Institute of Food Technologists®)

Microwave is an effective means to deliver energy to food through polymeric package materials, offering potential for developing short-time in-package sterilization and pasteurization processes. The complex physics related to microwave propagation and microwave heating require special attention to the design of process systems and development of thermal processes in compliance with regulatory requirements for food safety. This article describes the basic microwave properties relevant to heating uniformity and system design, and provides a historical overview on the development of microwave-assisted thermal sterilization (MATS) and pasteurization systems in research laboratories and used in food plants. It presents recent activities on the development of 915 MHz single-mode MATS technology, the procedures leading to regulatory acceptance, and sensory results of the processed products. The article discusses needs for further efforts to bridge remaining knowledge gaps and facilitate transfer of academic research to industrial implementation., (© 2015 Institute of Food Technologists®)

Unlabelled: Whole grain wheat (Triticum aestivum L.) foods can provide critical nutrients for health and nutrition in the human diet. Potential flavor differences among varieties can be examined using consumption discrimination of the house mouse (Mus musculus L.) as a model system. This study examines consistency and repeatability of the mouse model and potentially, wheat grain flavor. A single elimination tournament design was used to measure relative consumption preference for hard red spring and hard white spring varieties across all 3 experiments in combination with 2 mouse cohorts. Fifteen replicate mice were used in 24-h trials to examine differences in preference among paired wheat varieties until an overall "winner" was established as the most highly preferred variety of wheat. In all 3 experiment-cohort combinations, the same varieties were preferred as the "winner" of both the hard red spring and hard white spring wheat varieties, Hollis and BR 7030, respectively. Despite the consistent preference for these varieties across experiments, the degree (magnitude) to which the mice preferred these varieties varied across experiments. For the hard white spring wheat varieties, the small number of varieties and confounding effects of experiment and cohort limited our ability to accurately gauge repeatability. Conversely, for the hard red spring wheat varieties, consumption preferences were consistent across experiments and mice cohorts. The single-elimination tournament model was effective in providing repeatable results in an effort to more fully understand the mouse model system and possible flavor differences among wheat varieties., Practical Application: The mouse model system used here is effective in identifying wheat varieties that may be more or less desirable to humans in whole wheat foods. The system identifies consistent differences across different mouse cohorts and crop years., (Published 2015. This article is a U.S. Government work and is in the public domain in the USA.)

The purpose of this study was to determine the physicochemical properties of lutein microcapsules. Nine types of lutein microcapsules were prepared in order to determine their encapsulation efficiency and yield. Results show that lutein microcapsules with maltodextrin M040 and sucrose at the weight ratio of 3:1 (designated as M040:1) had the highest encapsulation efficiency (90.1%) among the lutein microcapsules, as well as a higher encapsulation yield (90.4%). The onset glass transition temperatures (Tgi ) and the surface dents of the lutein microcapsules decreased as the dextrose equivalent value of maltodextrin and the weight ratio of sucrose increased. Enthalpy relaxation experiments were conducted for the lutein microcapsules M040:1 at (Tgi - 5) , (Tgi - 10), and (Tgi - 15) °C, and the obtained data were fitted to the Kohlrausch-Williams-Watts model. Results show that the mean relaxation time (τ) (316 h) of M040:1 lutein microcapsules aged at (Tgi - 15) °C was greater than the τ (161 h) at (Tgi - 10) °C and τ (60.5 h) at (Tgi - 5) °C. Effects of temperature and oxygen transmission rates for package film on the storage stability of M040:1 lutein microcapsules were also investigated. Findings show that rates of lutein degradation and color change increased by an order of magnitude as storage temperature (4 to 97 °C) and oxygen transmission rate of the package film (0.018 to 62.8 cc/m(2) day) increased. These results suggest that lutein is highly unstable and susceptible to thermal and oxidative degradations. However, microencapsulation with appropriate wall materials of higher relaxation time and high oxygen barrier packaging can increase the storage life., (© 2015 Institute of Food Technologists®)

Although caviar is a premium product which offers nutritional benefits, few studies have characterized its sensory properties. As such, this study sought to develop a lexicon for sensory evaluation of caviar appearance, texture, aroma, and flavor/taste and to relate these attributes to consumer acceptance. A trained panel identified 16 sensory attributes for evaluation along a 15-cm scale and used CATA (check all that apply) methodology to indicate the less frequently encountered off-aromas, appearance traits, and persistent flavors. Using this lexicon, the trained panel described differences among caviar samples harvested from sturgeon fed varying diets. Acceptance of the caviar was also evaluated by a consumer panel. As evaluated by the trained panelists, analysis of variance (ANOVA) results indicated differences among caviar in the sensory attributes of tactile firmness, mustard color, egg size, in-mouth firmness, seafood fresh flavor, fresh butter flavor, earthy flavor, yeasty flavor, and bitterness (P < 0.05). Logistic regression of CATA responses indicated that caviar varied by diet in several aroma and aftertaste attributes, and marbled appearance (P < 0.05). Using partial least squares analysis on the consumer and trained panel data, overall consumer acceptance of caviar was driven by tactile firmness, sea fresh flavor, fresh butter flavor, and black color. This overall acceptance was highly correlated with acceptance of texture (r = 0.867) and flavor/taste (r = 0.999). Overall, this lexicon allows for standardized sensory evaluation of caviar using a common set of descriptors. This lexicon and information regarding the drivers of caviar acceptance can be used by industry professionals to ensure optimal caviar quality., (© 2014 Institute of Food Technologists®)

Wheat (Triticum aestivum L.) plays a central role in the health and nutrition of humans. Yet, little is known about possible flavor differences among different varieties. We have developed a model system using the house mouse (Mus musculus L.) to determine feeding preferences as a prelude to extending results to human sensory analysis. Here, we examine the application of a single-elimination tournament design to the analysis of consumption preferences of a set of hard red and hard white spring wheat varieties. A single-elimination tournament design in this case pairs 2 wheat varieties and only 1 of the 2 is advanced to further tests. Preferred varieties were advanced until an overall "winner" was identified; conversely, less desirable varieties were advanced such that an overall "loser" was identified. Hollis and IDO702 were the winner and loser, respectively, for the hard red varieties, and Clear White 515 and WA8123 were the winner and loser, respectively, for the hard white varieties. When using the more powerful protocol of 14 mice and a 4-d trial, differences in mean daily consumption preferences of 2 varieties were separated at P-values as small as 2 × 10(-8) . The single-elimination tournament design is an efficient means of identifying the most and least desirable varieties among a larger set of samples. One application for identifying the 2 extremes in preference within a group of varieties would be to use them as parents of a population to identify quantitative trait loci for preference., (Published 2014. This article is a U.S. Government work and is in the public domain in the USA.)

Texture differences of cooked quinoa were studied among 13 different varieties. Correlations between the texture parameters and seed composition, seed characteristics, cooking quality, flour pasting properties, and flour thermal properties were determined. The results showed that texture of cooked quinoa was significantly differed among varieties. 'Black,' 'Cahuil,' and 'Red Commercial' yielded harder texture, while '49ALC,' '1ESP,' and 'Col.#6197' showed softer texture. '49ALC,' '1ESP,' 'Col.#6197,' and 'QQ63' were more adhesive, while other varieties were not sticky. The texture profile correlated to physical--chemical properties in different ways. Protein content was positively correlated with all the texture profile analysis (TPA) parameters. Seed hardness was positively correlated with TPA hardness, gumminess, and chewiness at P ≤ 0.09. Seed density was negatively correlated with TPA hardness, cohesiveness, gumminess, and chewiness, whereas seed coat proportion was positively correlated with these TPA parameters. Increased cooking time of quinoa was correlated with increased hardness, cohesiveness, gumminess, and chewiness. The water uptake ratio was inversely related to TPA hardness, gumminess, and chewiness. Rapid Visco Analyzer peak viscosity was negatively correlated with the hardness, gumminess, and chewiness (P < 0.07); breakdown was also negatively correlated with those TPA parameters (P < 0.09); final viscosity and setback were negatively correlated with the hardness, cohesiveness, gumminess, and chewiness (P < 0.05); setback was correlated with the adhesiveness as well (r = -0.63, P = 0.02). Onset gelatinization temperature (To ) was significantly positively correlated with all the texture profile parameters, and peak temperature (Tp ) was moderately correlated with cohesiveness, whereas neither conclusion temperature (Tc ) nor enthalpy correlated with the texture of cooked quinoa., (Published 2014. This article is a U.S. Government work and is in the public domain in the USA.)

Utilizing more than one sweetener has been shown to be an effective way to substitute sucrose in food products. The objective of this study was to apply the augmented simplex-centroid mixture design for the optimization of acceptable sweetener blends using coconut sugar, agave, and stevia. Sweetener blends were evaluated in aqueous solutions and gluten-free granola bars by a trained panel and consumers (n = 60). Significant differences were found between sweetener mixtures in solutions by both panelists and consumers (P < 0.05). Taste profiles for the sweetener solutions were also generated using the electronic tongue. Most consumer and trained intensity ratings were highly correlated (R(2) ≥ 0.79) with the electronic tongue taste profile analysis. Granola bars were also found to be significantly different (P < 0.05), with consumers preferring coconut sugar mixtures. Using contour plots and desirability function analysis, an optimal sweetener combination was found for a granola bar formulation of 89.9% coconut sugar, 6.1% agave, and 4% stevia. These results indicate that a mixture design can be a reliable way to develop new sweetener blends for product development., (© 2014 Institute of Food Technologists®)

There is little research evaluating flavor preferences among wheat varieties. We previously demonstrated that mice exert very strong preferences when given binary mixtures of wheat varieties. We plan to utilize mice to identify wheat genes associated with flavor, and then relate this back to human preferences. Here we explore the effects of experimental design including the number of days (from 1 to 4) and number of mice (from 2 to 15) in order to identify designs that provide significant statistical inferences while minimizing requirements for labor and animals. When mice expressed a significant preference between 2 wheat varieties, increasing the number of days (for a given number of mice) increased the significance level (decreased P-values) for their preference, as expected, but with diminishing benefit as more days were added. However, increasing the number of mice (for a given number of days) provided a more dramatic log-linear decrease in P-values and thus increased statistical power. In conclusion, when evaluating mouse feeding preferences in binary mixtures of grain, an efficient experimental design would emphasize fewer days rather than fewer animals thus shortening the experiment duration and reducing the overall requirement for labor and animals., (© 2013 Institute of Food Technologists®)

The purpose of the study was to identify key sensory attributes that influence consumer liking for frozen and fresh red raspberries using preference mapping. Sensory profiling of different raspberry cultivars and selections from the Washington State Univ. and Oregon State Univ. breeding programs was carried out using a trained panel (frozen, n = 12 and fresh, n = 10). In addition, a subset of frozen and fresh raspberries of each cultivar was assessed by consumers for sensory acceptability (n = 105 and n = 100, respectively). Based on overall hedonic ratings, cluster analysis identified 3 clusters of frozen raspberry consumers from day 1 (41% "nondistinguishers," 34% "likers," and 25% "nonlikers") and day 2 (41% "group 1 likers," 26% "nonlikers," and 34% and 33% group 2 likers"). For fresh raspberry consumers, 2 clusters were detected from day 1 (54% "likers" and 46% nondistinguishers") and day 2 (54% "group 1 likers" and 46% "group 2 likers"). Preference mapping was applied on the descriptive sensory and acceptability of clustered consumer data. Partial least squares regression results showed that liking of frozen raspberries was driven by high raspberry flavor, firmness, and sweetness. Conversely, disliking of frozen raspberries was related to high sour and aftertaste intensity. In the case of fresh raspberries, high color uniformity, raspberry aroma, raspberry flavor, floral aroma, green flavor, bitter, astringency, and aftertaste increased the acceptability, whereas high color intensity and green aroma were associated with negative drivers of liking. The information obtained in this study can be a useful guide for breeders in the selection of characteristics for growing superior quality raspberries., (© 2013 Institute of Food Technologists®)

Unlabelled: Polymer-layered silicate nanocomposites have been shown to improve the gas barrier properties of food packaging polymers. This study developed a computer simulation model using the commercial software, COMSOL Multiphysics to analyze changes in oxygen barrier properties in terms of relative diffusivity, as influenced by configuration and structural parameters that include volume fraction (φ), aspect ratio (α), intercalation width (W), and orientation angle (θ) of nanoparticles. The simulation was performed at different φ (1%, 3%, 5%, and 7%), α (50, 100, 500, and 1000), and W (1, 3, 5, and 7 nm). The θ value was varied from 0° to 85°. Results show that diffusivity decreases with increasing volume fraction, but beyond φ = 5% and α = 500, diffusivity remained almost constant at W values of 1 and 3 nm. Higher relative diffusivity coincided with increasing W and decreasing α value for the same volume fraction of nanoparticles. Diffusivity increased as the rotational angle increased, gradually diminishing the influence of nanoparticles. Diffusivity increased drastically as θ changed from 15° to 30° (relative increment in relative diffusivity was almost 3.5 times). Nanoparticles with exfoliation configuration exhibited better oxygen barrier properties compared to intercalation. The finite element model developed in this study provides insight into oxygen barrier properties for nanocomposite with a wide range of structural parameters. This model can be used to design and manufacture an ideal nanocomposite-based food packaging film with improved gas barrier properties for industrial applications., Practical Applications: The model will assist in designing nanocomposite polymeric structures of desired gas barrier properties for food packaging applications. In addition, this study will be helpful in formulating a combination of nanoparticle structural parameters for designing nanocomposite membranes with selective permeability for the industrial applications including membrane separation techniques., (© 2012 Institute of Food Technologists®)

The purpose of this research was to study the functional differences between straight grade (75% extraction rate) and patent (60% extraction rate) flour blends from 28 genetically pure soft white and club wheat grain lots, as evidenced by variation in sugar snap cookie and Japanese sponge cake quality. Functional differences were examined relative to arabinoxylan content, protein content, and oxidative cross-linking potential of flour slurries. Oxidative cross-linking measurements were obtained on flour slurries with a low shear Bostwick consistometer and considered endogenous oxidative cross-linking potential (water alone) or enhanced oxidative cross-linking potential (with added hydrogen peroxide-peroxidase). A 2-way ANOVA indicated that flour blend was the greater source of variation compared to grain lot for all response variables except water-extractable arabinoxylan content. Patent flours produced larger sugar snap cookies and Japanese sponge cakes, and contained significantly less total and water-unextractable arabinoxylans, protein, and ash than did straight grade flours. Patent flours produced more viscous slurries for endogenous and enhanced cross-linking measurements compared to the straight grade flours. The functional differences between patent and straight grade flours appear to be related to the particular mill streams that were utilized in the formulation of the 2 flour blends and compositional differences among those streams., (Journal of Food Science © 2011 Institute of Food Technologists® No claim to original US government works.)

Unlabelled: Grape seed flour (GSF) from grape pomace, a waste product generated during winemaking, was explored for use in bread production due to its potential health benefits. This study evaluated the consumer acceptance and physical properties of bread, including total phenolic content (TPC), made with varying levels of GSF. Dough and breads were prepared using different levels of replacement of hard red spring wheat flour (HRS) with GSF (0 to 10 g GSF/100 g HRS) and stored for 0, 2, or 6 wk at -20 °C. Replacement of 10 g GSF/100 g HRS increased the bread TPC from 0.064 mg tannic acid/g dry weight to 4.25 mg tannic acid/g dry weight. Consumer acceptance and instrumental analyses were used to investigate changes in sensory and texture properties due to GSF replacement. Replacement above 5 g GSF/100 g HRS decreased the loaf brightness and volume, with an increase in the bread hardness and porosity. Generally, breads containing ≥ 7.5 g GSF/100 g HRS were characterized by lower consumer acceptance. A reduction in overall and bitterness acceptance was observed in bread at 10 g GSF/100 g HRS, with decreased acceptance of astringency and sweetness at 7.5 and 10 g GSF/100 g HRS. Based on these results, the replacement of 5 g GSF/100 g HRS is recommended for the production of fortified breads with acceptable physical and sensory properties and high TPC activity compared to refined bread., Practical Applications: This study shows that grape seed flour (GSF) can be used to replace hard red spring wheat flour (HRS) in bread production, with moderate impact on the physical and sensory properties of the bread. Replacement of up to 10 g GSF/100 g HRS significantly decreased overall consumer acceptance of the bread, with lower consumer acceptance of sweetness and astringency at 7.5 and 10 g GSF/100 g HRS. Thus, a replacement value of 5 g GSF/100 g HRS is recommended for the production of fortified breads., (© 2011 Institute of Food Technologists®)

Unlabelled: The production of grape seed flour (GSF) from a waste product generated during winemaking, is of interest in product development applications due to its potential health benefits. However, before GSF can used in baking as a source of additional antioxidants, research on its heat stability is required. The overall objective of this study was to assess changes in phenolic content and antioxidant activity of GSF during heating. Merlot GSF was heated at 5 temperatures (120 to 240 °C) for 0 to 90 min. At each time/temperature combination, total phenolic content (TPC), total flavanoid content (TFC), Trolox equivalent antioxidant capacity (TEAC), 2,2 diphenyl-1-picrylhydrazyl (DPPH) radical scavenging, and ferric ion reducing antioxidant power (FRAP) of the extracts were determined. Specific polyphenolic compounds, including catechin, gallocatechin, epicatechin, and gallic acid were also measured. Results showed that when Merlot GSF was heated to ≥180 °C, significant decreases in the TPC and antioxidant activity, measured using FRAP, DPPH, and TEAC, were observed. Longer heating times also caused a reduction in antioxidant capability. Catechin and epicatechin content decreased with increasing heating temperature while gallocatechin and gallic acid content increased. Both catechin and epicatechin content had strong positive correlations (r > 0.91) with TPC and TFC, as well with FRAP and TEAC, suggesting that the GSF antioxidant activity is related to the presence of these particular compounds. Overall, while a decrease in antioxidant content was observed during heating, this occurred at higher baking temperatures. Thus GSF may be suitable for use as an ingredient in baked goods to bolster antioxidant content., Practical Application: In order for Merlot grape seed flour (GSF) to be used in baking as a source of additional antioxidant compounds, the impact of heating on the polyphenolic compounds in the GSF needed to be examined. Thermal treatment of Merlot GSF caused significant decreases in the TPC, antioxidant power, and specific polyphenolic compounds when heated ≥180 °C. Thus while antioxidant content decreased with higher heating temperatures, this occurred at higher baking temperatures. Thus, GSF may be suitable for use as an ingredient in baked goods to bolster antioxidant content., (© 2011 Institute of Food Technologists®)

Anthocyanins, natural plant pigments in the flavonoid group, are responsible for the red color and some of the nutraceutical benefits of raspberries. This study explores anthocyanin degradation in frozen and freeze-dried raspberries during storage in relation to glass transition temperatures. Frozen raspberries were stored at -80, -35, and -20 °C, while freeze-dried raspberries were stored at selected water activity (a(w)) values ranging from 0.05 to 0.75 at room temperature (23 °C) for more than a year. The characteristic glass transition temperatures (T'(g)) of raspberries with high water content and glass transition temperature (T(g)) of raspberries with small water content were determined using a differential scanning calorimeter. The pH differential method was used to determine the quantity of anthocyanins in frozen and freeze-dried raspberries at selected time intervals. The total anthocyanins in raspberries fluctuated during 378 d of storage at -20 and -35, and -80 °C. Anthocyanin degradation in freeze-dried raspberries ranged from 27% to 32% and 78% to 89% at a(w) values of 0.05 to 0.07 and 0.11 to 0.43, respectively, after 1 y. Anthocyanins were not detectable in freeze-dried raspberries stored at a(w) values of 0.53 to 0.75 after 270 d. First order and Weibull equations were used to fit the anthocyanin degradation in freeze-dried raspberries. The 1(st)-order rate constant (k) of anthocyanin degradation ranged from 0.003 to 0.023 days⁻¹ at the selected water activities. Significant anthocyanin degradation occurred in both the glassy and rubbery states of freeze-dried raspberries during long-term storage. However, the rate of anthocyanin degradation in freeze-dried raspberries stored in the glassy state was significantly smaller than the rate of anthocyanin degradation in the rubbery state., (© 2011 Institute of Food Technologists®)