Search

Sugar beet leaves can be a viable and economically interesting source of high-quality protein for the food industry. We investigated how storage conditions and leaf wounding at harvest affect the content and quality of the soluble protein. After collection, leaves were either stored intact or shredded to mimic wounding induced by commercial leaf harvesters. Leaf material was stored in small volumes at different temperatures to assess leaf physiology or in larger volumes to assess temperature development at different locations in the bins. Protein degradation was more pronounced at higher storage temperatures. Wounding accelerated the degradation of soluble protein at all temperatures. Both wounding and storage at higher temperatures greatly stimulated respiration activity and heat production. At temperatures below 5°C, ribulose-1,5-biphosphate carboxylase oxygenase (RuBisCO) in intact leaves was preserved for up to 3 weeks. At temperatures of 30–40°C, RuBisCO degradation occurred within 48 h. Degradation was more pronounced in shredded leaves. In 0.8-m3 storage bins at ambient temperature, core temperatures rapidly increased, up to 25°C in intact leaves and up to 45°C in shredded leaves within 2–3 days. Immediate storage at 5°C greatly suppressed the temperature increase in intact but not in shredded leaves. The indirect effect of excessive wounding, that is, heat production, is discussed as the pivotal factor responsible for increased degradation of protein. For optimal retention of soluble protein levels and quality in harvested sugar beet leaves, it is advised to minimize wounding and to store the material at temperatures around −5°C. Practical Application: To preserve the soluble protein content and quality for at least 3 weeks, sugar beet leaves should be harvested with minimal wounding and stored at temperatures between 1 and 5°C. When aiming to store minimally wounded leaves in larger volumes, it must be ensured that the product temperature in the core of the biomass meets the temperature criterium or the cooling strategy must be adjusted. The principles of minimal wounding and low temperature storage are transferable to other leafy crops that are harvested for food protein.

Neapolitan pizza, a renowned Italian food recognized as one of the traditional specialties guaranteed (TSG) by European Commission Regulation no. 97/2010, should be exclusively baked in wood-fired ovens for approximately 90 s. Despite its extensive use in restaurants and rotisserie shops all around the world, such equipment has been very poorly studied thus far. The aims of this study were to characterize the operation of a pilot-scale wood-fired pizza oven from its start-up phase to its baking operation and assess its thermal efficiency. To manage brick firing, the oven was lighted at a firewood feed rate (Q

Methemoglobinemia is a sporadic, potentially fatal disease of poor tissue oxygenation in which ferrous hemoglobin (Fe

Fish is perishable and has the short shelf-life. To maintain its quality, it is necessary to implement the appropriate technology, particularly nonthermal processing along with safe additive, especially from plant origin under the concept of "hurdle technology". The use of potential vesicle including liposome for loading the plant extract could be a means to enhance the stability and activities of the extract. The current study aimed to evaluate the effect of liposomes loaded with betel leaf ethanolic extract (L/BLEEs) or unencapsulated BLEE (U/BLEE) in conjunction with modified atmospheric packaging (MAP) and nonthermal plasma (NTP) on the quality changes and shelf-life of Nile tilapia fillets (TFs) stored under refrigerated condition (4°C). TFs treated with L/BLEE or U/BLEE at 400 ppm, packed under modified atmosphere (CO2 :Ar:O2 = 60:30:10) and subjected to NTP for 300 s (L/BLEE-400/MAP-NTP and U/BLEE-400/MAP-NTP, respectively) had the lowest microbial and chemical changes during storage, while the control showed the highest changes (p 0.05) between all the samples at day 0 of storage. Only L/BLEE-400/MAP-NTP and U/BLEE-400/MAP-NTP were still sensorially acceptable after 12 days at 4°C. Therefore, L/BLEE or U/BLEE combined with MAP/NTP treatment could be adopted as a potent hurdle for shelf-life extension of TFs. PRACTICAL APPLICATION: Natural additives and nonthermal processing technologies have gained increasing interest for preservation of fish. Liposomes loaded with betel leaf ethanolic extract (L/BLEE) rich in polyphenolics could be used together with modified atmospheric packaging (MAP) and nonthermal plasma (NTP) to retard bacterial growth and chemical deterioration in Nile tilapia fillets. These hurdles were proven to be able to maintain the qualities of tilapia fillets stored at 4°C up to 12 days, especially when L/BLEE was used at 400 ppm. Therefore, shelf-life extension of Nile tilapia fillets or other fish can be achieved by using the natural additive and nonthermal processing technologies.

Eight different roast profiles for each of the three origins of cacao were prepared and made into unsweetened chocolate based upon an I-Optimal response-surface design for minimizing prediction variance. Quantitative chemical analysis of all chocolate treatments was performed with HPLC-DAD on six important bitter compounds (i.e., theobromine, caffeine, epicatechin, catechin, procyanidin B2, and cyclo(Proline-Valine)). Least-squares linear modeling was then performed. Using derived linear models, response-surface contour plots were produced to show predicted changes in the six bitter compounds over the entire experimental region. Significant and large decreases in concentration of epicatechin and procyanidin B2 were observed as roasting progressed, whereas for catechin and cyclo(Proline-Valine), significant increases were observed. Small yet significant theobromine and caffeine concentration increases were also observed with roasting, likely due to moisture loss. Some significant differences were also found between the cacao origins for all bitter compound concentrations except for cyclo(Proline-Valine), suggesting the importance of a survey encompassing a greater number of cacao origins in the future to obtain a more complete picture of the variation in bitter compounds in cacao due to origin. PRACTICAL APPLICATION: This research describes how roasting can be used to alter the concentration of bitter and sometimes astringent chemicals for several origins of cacao, which may be used to improve the sensory characteristics of dark chocolate.

Persimmon is among the fruits with a significant postharvest loss over the last few years. Thus, it is important to investigate new technical feasibilities to obtain products with higher added value from this fruit. In this study persimmon puree films (Diospyros kaki L.) incorporated with glycerol and pectin by casting technique were formulated using a Plackett-Burman design and characterized. The puree showed high carbohydrate content (175.70 g/kg). In descending order, fructose, glucose, and maltohexaose were the sugars found in persimmon. All the independent variables studied-puree concentration, pectin, glycerol, and temperature-statistically influenced the tensile strength (0.75-1.30 MPa), elongation at break (17.69-26.02%), and Young's modulus (3.34-10.94 MPa) of the films. Water solubility ranged from 68.80% to 80.86%, which were very similar to other films based on puree fruit in the literature. Samples presented high vapor permeability (5.77-6.63 × 10-6 g/h/m/Pa) when compared to biodegradable films. Scanning electron microscopy showed smooth surfaces and good plasticizer dispersion. The colorimetric coordinates indicated the films are reddish and yellowish, giving them an orange-ish visual aspect. The films exhibited antimicrobial activity, especially against Escherichia coli and Staphylococcus aureus. These results indicate that the developed films might be a good candidate for antimicrobial food packaging improving food quality and safety. PRACTICAL APPLICATION: The production of fruit-film packaging with functional and biodegradable characteristics might reduce postharvest loss of fruit and have the potential to develop active food packaging. In this sense, this study is in line with precepts of the circular economy, once it takes advantage of exceeded resources that would be discarded by generating biodegradable films which can be used as edible packaging. Furthermore, given the antimicrobial potential of the films developed, they might be applied as active packaging to improve food safety and extend shelf life.

Dry beans(Phaseolus vulgaris) are rich in complex carbohydrates including resistant starch (RS). RS, the starch fraction that escapes digestion, typically ranges from 35% in raw beans to 4% in cooked beans. A low RS bean genotype, Cebo Cela, was identified with 96% less RS (1.5% RS) than normal raw beans. The goal of this research was to elucidate the factors responsible for this low RS phenotype. The low RS phenotype was evaluated in whole bean flour and starch in Cebo Cela (yellow), Canario (yellow), Alpena (navy) and Samurai (otebo). α-Amylase activation was found to be a major contributor of the low RS content phenotype of the whole bean flour for Cebo Cela (-21.9% inhibition). Total starch (43.6%-40.2%), amylose (31.0%-31.5%), molecular weight and chain length distributions of amylose and amylopectin did not contribute to the low RS phenotype. Yellow bean starches were digested nearly 1.5 times (95%-94%) faster than starch granules from otebo and navy beans (65%-73%) due to lower proportions of amylopectin chains. PRACTICAL APPLICATION: This study is of value to the food industry because the yellow bean, Cebo Cela, is easily hydrolyzed by α-amylase and also has α-amylase promotion properties. Therefore, Cebo Cela can be used as an alternate starch source for ethanol fermentation and for the production of maltodextrins and fructose/glucose syrups which are used as food thickeners and sweeteners.

Cold plasma is formed by the nonthermal ionization of gas into free electrons, ions, reactive atomic and molecular species, and ultraviolet (UV) radiation. This cold plasma can be used to alter the surface of solid and liquid foods, and it offers multiple advantages over traditional thermal treatments, such as no thermal damage and increased output variation (due to the various input parameters gas, power, plasma type, etc.). Cold plasma appears to have limited impact on the sensory and color properties, at lower power and treatment times, but there has been a statistically significant reduction in pH for most of the cold plasma treatments reviewed (p < 0.05). Carbohydrates (cross linking and glycosylation), lipids (oxidation), and proteins (secondary structure) are more significantly impacted due to cold plasma at higher intensities and longer treatment times. Although cold plasma treatments and food matrices can vary considerably, this review has identified the literary evidence of some of the influences and impacts of the vast array of cold plasma treatment parameters on the biomolecular and organoleptic properties of these foods. Due to the rapidly evolving nature of the field, we have also identified that authors prioritize the presentation of different information when publishing from different research areas. Therefore, we have proposed a number of key physical and chemical cold plasma parameters that should be considered for inclusion in all future publications in the field.

To better control the quality of synthetic vanillin obtained by using the guaiacol synthesis method, the olfactory impacts of byproducts on the aroma of the synthetic vanillin samples were evaluated and their optimum concentration ranges were determined. Four byproducts (guaiacol, ortho-vanillin, 5-methyl-vanillin, and 5-formyl-vanillin) were identified by gas chromatography-mass spectrometry (GC-MS) and quantified by gas chromatography-flame ionization detection (GC-FID) in the synthetic vanillin samples with different degrees of purity. The aroma intensities (AIs) of the four byproducts obtained by gas chromatography-olfactometry (GC-O) were: guaiacol (AI: 3.5-4.0, smoke), ortho-vanillin (AI: 1.6-2.5, almond), 5-methyl-vanillin (AI: 2.5-3.3, aldehyde), and 5-formyl-vanillin (AI: 3.2-3.8, green). The aroma perceptual interactions of the four byproducts and the vanillin in the synthetic vanillin samples were determined by S-curve analysis. Guaiacol and 5-methyl-vanillin showed synergistic effects by Feller's additive model. Combined with the results of an addition experiment, when the contents of guaiacol, ortho-vanillin, 5-methyl-vanillin, and 5-formyl-vanillin were within 50, 10, 400, and 1,000 mg/kg respectively, the byproducts had no effects on the aroma quality of the synthetic vanillin samples. PRACTICAL APPLICATION: Synthetic vanillin is one of the most commonly used food additives. Currently, the purity of synthetic vanillin can reach 99.9%, but trace byproducts are still present. Continuing to improve the purity of synthetic vanillin will significantly increase its production costs. Therefore, it is necessary to determine whether the presence of these byproducts affects the aroma quality of the synthetic vanillin samples or not. If they have a negative effect on its aroma, it will be important to reduce their content. If they have no influence or positive role, there is no need to control the content of these byproducts to very low levels. This study determined the content of the byproducts produced during the synthesis of vanillin by guaiacol glyoxylic acid method, judged the perceptual interaction between the byproducts and the vanillin in the synthetic vanillin samples, and determined the optimum range within which the byproducts had no effects on the aroma quality. This study provides a theoretical basis for improving the aroma quality of synthetic vanillin while controlling the production costs.

Hemp seed protein has the potential to be used in food systems as an emulsifying agent; however, there are still some shortcomings associated with hemp seed protein, such as poor solubility and tendency to aggregate. This study aims to improve the dispersibility of hemp seed protein as an emulsifier by complexing with pectin, driven by electrostatic force. Three protein to pectin ratios were used for complexation, from 1:1, 2:1 to 4:1. The complexation improved the polydispersity of hemp seed protein when dispersed in the aqueous phase. The hemp seed protein displayed multimodal size distribution in water at pH = 3.0 due to aggregation, while the incorporation of pectin helped to diminish those aggregated proteins. When the hemp seed protein was used to stabilize the oil-in-water emulsion, its stabilized emulsion showed promising homogenous droplet size distribution after emulsification. However, during the accelerated storage conditions (55°C), the emulsion stabilized solely by hemp seed protein was subjected to extensive coalescence. From day 0 to 9, the droplet size (d4,3 ) increased by 50 folds from 3.215 to 161.6 µm. In contrast, the hemp seed protein-pectin complex exhibited extraordinary stability during the storage test, where size evolution in all three samples was negligible compared to the emulsion stabilized by hemp seed protein. Rheological characterization suggests that pectin provided physical strength, which may help the emulsion droplets to maintain structural integrity under environmental stress. The underlying mechanism could be associated with the formation of a three-dimensional structure by pectin through bridging adjacent emulsion droplets. PRACTICAL APPLICATION: Hemp seed protein is gaining more and more attention as an emerging plant protein. Recently, hemp seed protein has been explored as an emulsifier, but its stabilized emulsion encounters instability issues during storage. Our study suggests pectin could be used as a co-stabilizer for hemp seed protein emulsions.

Softening is one of the main factors affecting market value and consumer preferences for jujubes, and it was closely related to the modification and depolymerization of pectin. Changes in characteristics of three pectins (water-soluble pectin (WSP), sodium carbonate-soluble pectin (SSP) and chelate-soluble pectin (CSP)), including their contents, degree of methylesterification (DM), neutral sugar compositions, the molecular weight (Mw ) distributions and nanostructures, from two jujube fruits cv Dongzao (DZ) and Jinsixiaozao (JS) during cold storage were assessed. The results showed that variation in pectin characteristics during cold storage was similar between DZ and JS. The reduction of firmness corresponded to a conversion of water-insoluble pectin to WSP during cold storage. DM of WSP presented an increase trend in the late storage. Rhamnose (Rha), arabinose (Ara) and glucose (Glc) were the crucial compositions in three pectins, and most neutral sugar compositions in three pectins first increased and then decreased during cold storage. Changes in the ratio of (galactose (Gal)+Ara)/Rha and Ara/Gal represented that the branch chains of rhamnogalacturonan-I in three pectins depolymerized after storage. The high Mw in WSP and SSP of jujubes were solubilized and extensively depolymerized into pectin with lower Mw after storage. AFM images showed an increase in short chains and branch structures of three pectins after storage. Overall, three pectins in DZ and JS depolymerized and solubilized during cold storage. WSP and SSP were more contributed to the softening of jujubes compared to CSP, and they played the critical role for regulating the softening of jujube fruits during cold storage. PRACTICAL APPLICATION: Softening is one of the main factors affecting market value and consumer preferences for jujubes, and it was closely related to the modification and depolymerization of pectin. Changes in characteristics of three pectins (WSP, SSP, CSP), including their contents, degree of methylesterification, neutral sugar compositions, the molecular weight distributions and nanostructures, from two jujube fruits cv Dongzao (DZ) and Jinsixiaozao (JS) during cold storage were assessed. Three pectins in DZ and JS depolymerized and solubilized during cold storage. WSP and SSP were more contributed to the softening of jujubes compared to CSP, and they played the critical role for regulating the softening of jujube fruits during cold storage. This study would elucidate the mechanism of jujube softening and help to regulate the postharvest quality during cold storage.

Virgin coconut oil (VCO), an edible oil prepared from fresh coconut kernel by natural or mechanical means without undergoing chemical refining, has been in the limelight of research as functional food oil. The phenolic components in VCO have been accredited with these pharmacological benefits. The present study compared the phenolic constituents of freshly prepared fermentation processed (FVCO) and hot-pressed VCO (HVCO) and their anti-inflammatory efficacies. The biochemical analysis documented quantitative variation in the phenolic content, being higher in HVCO than FVCO (40.03 ± 5.8 µg and 25.55 ± 5.8 µg/mL of oil, respectively). In vitro studies observed nitric oxide radical scavenging efficacy (IC50 value of 14.84 ± 0.81 µg/mL) for HVCO polyphenols, which shows higher inhibition efficacy than FVCO (29.41 ± 1.7 µg/mL). In dextran and formalin mediated acute and chronic inflammation in mice, HVCO displayed more protective efficacy (40.5 and 46.4% inhibition) than FVCO (33.3 and 43.8% inhibition), which is similar to the standard diclofenac (55.6 and 59.8% inhibition). The study, thus, concludes that compared to FVCO, HVCO is a more active anti-inflammatory agent. PRACTICAL APPLICATION: Virgin coconut oil, a widely used edible oil in South Asian countries, has been shown to have health benefits possibly exerted by the natural phenolics it contains. However, different modes of preparations of VCO determine the phenolic combinations and efficacy as well. Our study compared two different VCO preparations and suggests that the VCO prepared by the traditional way (HVCO) is pharmacologically potent than that prepared by simple fermentation process (FVCO) in reducing inflammation. The efficacy is attributed to the variations in phenolic profile revealed by LC-MS analysis. Hence, the current study suggests HVCO as a potential food supplement that can reduce the incidence of degenerative diseases.

We report on production of novel quaternary nanocomposite films based on thermoplastic starch (TPS, 8% w/v) derived from cassava, cocoa butter, (CB, 30% wt.%), and lemongrass essential oil (LEO, 1:1) nanoemulsions reinforced with different concentrations of brewery spent grain (BSG, 5 or 10 wt.%) fibers, by continuous casting. The chemical composition, the morphological, thermal, mechanical properties, film barrier, biodegradability in the vegetable compound, in addition to the application in chocolates, have been widely studied. The addition of CB, LEO, and BSG caused relevant changes in the starch-based films, such as increased extensibility (from 2.4-BSG5 to 9.4%-BSG10) and improved barrier to moisture (2.9 and 2.4 g.mm.kPa-1 .h-1 .m-2 ). Contrastingly, the thermal stability of the starch film was slightly decreased. The biodegradability of the herein developed quaternary nanocomposite films was the same as that of TPS films, eliminating concerns on the supplementation with active ingredients that are expected to have some biocidal effect. Despite checking antimicrobial activity only by contact under the biocomposites, chocolates packed with the films were well accepted by consumers, especially the samples of white chocolate stored in the BSG5 biocomposite. Overall, this new approach towards quaternary active, biodegradable films produced in a pilot-scale lamination unit was successful in either improving or at least maintaining the essential properties of TPS-based films for food packaging applications, while providing them with unique features and functionalities. PRACTICAL APPLICATION: This contribution relates to new approach toward quaternary films produced in a pilot-scale lamination unit. It relates to sustainability as it is both biodegradable and based on plant biomass, as well as produced via a clean, through high-yield process. The four components of the edible films we developed provide it with good in properties performance, as both a passive barrier (i.e. purely physical), and active, related to the sensory attributes of food, essential to be applied in food packaging. The valorization of a BSG also adds to the relevance of our contribution within the circular bioeconomy framework.

The supercooling degree (SD), which refers to the difference between the ice nucleation temperature and freezing point of kimchi, varies depending on the type of kimchi, manufacturer, recipe, and manufacturing season. The aim of this study is to investigate the major influencing factors for the supercooled storage of kimchi and to analyze the possibility of supercooled storage for commercial kimchi. Pearson correlation analysis determined that, in commercial kimchi manufactured between March and July 2018, the SD of kimchi correlated to the number of aerobic bacteria (P

Polymerized whey protein and low-methoxyl pectin were used as thickening agents in fermented dairy food formulations. Effects of polymerized whey protein and pectin (PP) system on particle size distributions, rheological properties, molecular weight distributions of polysaccharides, microstructures, and volatile compounds of goat milk kefir mild and kefir were investigated. Clustering analysis indicated that the PP system addition could increase the particle size distributions and rheological properties of both kefir products. Molecular weight distributions of polysaccharides shown that an intermolecular aggregation occurred between pectin and exopolysaccharides (produced by microorganisms from starter cultures). Micrographs suggested that polymerized whey protein interacted with casein network to form a dense structure. Meanwhile, PP system did not change the characteristics flavor of goat milk kefir mild and kefir. Results indicated that the PP system may be a good combination to improve the physical properties of kefir products. PRACTICAL APPLICATION: Goat milk kefir has gained more and more attention due to its specific flavor and functional properties. However, poor texture of milk curd limits the consumption of fermented goat milk. As a new combination of thickening agents, PP system could specifically improve the particle size distributions and rheological properties of fermented goat milk. And the characteristic flavor of goat milk kefir was not changed. Results indicated that PP system can be used as thickening agents for formulations of different fermented goat milk products.

The impact of Eucheuma on water loss and status in sponge cakes was measured and analyzed in this study. Eucheuma was used to replace 0%, 10%, and 20% of wheat flour to make sponge cakes, coded as the control, EP10, and EP20, respectively. The initial water content of batters showed no significant differences (around 57.0%, dry basis), whereas the final EP10 and EP20 products had higher water content. Three stages were found during baking in control sample and these three stages were fitted by linear, linear, and exponential models with root mean squared error (RMSE) of 0.016, 0.018, and 0.133, respectively. Eucheuma addition decreased the water loss rate and changed the water loss stages, which were fitted by linear, linear, and linear models in EP20 sample (RMSE = 0.027, 0.047, and 0.108, respectively). The crust formation and crumb structure analysis showed that the formation of cracks and the disappearance of pore structures hindered the water evaporation. The low-field proton nuclear magnetic resonance and magnetic resonance imaging results showed that the water status in the final EP20 products was not as tightly as that in the control samples. A proposed schematic diagram was developed based on the qualitative analysis of the transfer mechanisms to explain the total effect of Eucheuma on the water loss rate and status. These results aid our understanding of the water loss process of sponge cakes and promote the potential application of Eucheuma in bakery products. PRACTICAL APPLICATION: Eucheuma as a flour replacement can improve the contents of dietary fiber and minerals like potassium of sponge cake. The impact of Eucheuma on water loss and status in sponge cake was measured and analyzed in this study. The results can promote the potential application of Eucheuma in bakery products and predict the quality attributes of baking products.

The objective of this survey was to estimate the prevalence, contamination level, and genetic diversity of Salmonella in selected raw, shelled tree nuts (Brazil nuts, cashews, hazelnuts, macadamia nuts, pecans, pine nuts, pistachios, and walnuts) at retail markets in the United States. A total of 3,374 samples of eight tree nuts were collected from different types of retail stores and markets nationwide between September 2015 and March 2017. These samples (375 g) were analyzed using a modified FDA's BAM Salmonella culture method. Of the 3,374 samples, 15 (0.44%) (95% confidence interval [CI] [0.25, 0.73]) were culturally confirmed as containing Salmonella; 17 isolates were obtained. Among these isolates, there were 11 serotypes. Salmonella was not detected in Brazil nuts (296), hazelnuts (487), pecans (510), pine nuts (500), and walnuts (498). Salmonella prevalence estimates in cashews (510), macadamia (278), and pistachios (295) were 0.20% (95% CI [

This study aimed to estimate the water intake of Japanese people from food moisture. For this purpose, we described a water conversion factor for cooking (WCFC) that focuses on how cooking changes the water content of complete dishes and not food ingredients, and investigated methods for calculating the water content of cooked dishes. In this study, we utilized 129 dishes commonly consumed by Japanese people. We measured the water content of the dishes before and after cooking and calculated the percentage of residual water after cooking. The dishes were divided into staple foods or side dishes, and categorized based on residual percentage in water content and cooking method. The percentage of residual water after cooking change in water content in each category was expressed in terms of the WCFC, which is the water content of the cooked dish relative to the uncooked dish. In total, there were 43 categories with a WCFC range of 0.40 to 1.33. Our results revealed that the water content of food is not simply changed by heating-based cooking methods, but by a complex combination of cooking operations. Furthermore, by fitting WCFC to a culinary structuralism theory, it can potentially be utilized for all cuisines and not just dishes in Japan. Additionally, we found that the water content of a day's worth of food calculated using WCFC and actual measurements barely differed, indicating that WCFC could potentially be used to estimate water intake from food moisture. PRACTICAL APPLICATION: This research can be used in nutrition surveys to estimate water intake from food moisture.

Risk analysis consists of risk assessment (RA), risk management (RM), and risk communication (RC). In most countries, RA and RM of food safety are separated to achieve a high scientific integrity, and typically occur in sequential order. However, in case of a food safety incident, even though being separate processes, RA and RM are performed simultaneously due to great time pressure and expected high impacts. The aim of this study was to analyze and evaluate the observed interactions between RA and RM processes, during three major food incidents in Europe, and to provide suggestions for possible improvement. Based on the differences observed between the three cases, strengths and weaknesses of each system have been identified. The enterohemorrhagic Escherichia coli (EHEC) crisis in 2011 in Germany, the horsemeat scandal in 2013 in Ireland, and the fipronil incident in 2017 in the Netherlands were used as case studies. Timelines of these incidents and crisis management procedures in place in each of the three countries provided the basis for further analysis. First, results showed that details of the communication processes between RA and RM bodies were frequently lacking in crisis management protocols. Second, RA, RM, and RC processes differed for each incident, due to differences in estimated risk for public health, but also due to differences in the organization within a country. Based on our results, we recommend that crisis management protocols should contain a section on communication between RA, RM, and on communication between member states in the EU.

Pectin-wax-based emulsion systems could be used to form edible films and coatings with desired water permeability characteristics. Pectin is often used in food industry due to its gelling and viscosity increasing properties. Physical properties of pectin are highly dependent on its esterification degree. Waxes are commonly used as edible coatings to enhance the water barrier properties of food products. This study focuses on preparing emulsions with sunflower oil wax (SFW) and high methoxyl pectin (HMP) at different concentrations for any possible edible film or coating formulations. Sunflower oil (SFO) was added as the dispersed oil phase to these emulsions. Characterization of the emulsions was performed by using particle size, rheology, and time domain nuclear magnetic resonance (NMR) relaxometry measurements. Effects of HMP concentration and the presence of SFO in the emulsion formulations were explored. Mean particle size values were recorded between 1 and 3 µm. Rheology measurements showed that increasing HMP concentrations and presence of SFO in emulsions resulted in more pseudoplastic behavior. NMR transverse relaxation times (T2 ) were measured to detect the differences between the emulsions. Relaxation spectrum analysis was also conducted for a detailed understanding of the transverse relaxations. Addition of SFO and higher HMP concentrations decreased the T 2 values of the emulsion systems (P < 0.05). However, T2 decreasing effect of SFO was compensated at 10% (w/w) HMP concentration showing that SFO was well dispersed in this particular emulsion formulation. Changes in the rheological behavior and relaxation times provided insight on the formation and stability of the emulsions. PRACTICAL APPLICATION: Findings of this study can be utilized and integrated to produce edible films and coatings with different water permeability characteristics. This study showed that NMR relaxometry parameters were also effective in monitoring and determining the physical characteristics of the pectin-wax-based emulsion systems as other conventional techniques including rheology and particle size measurements. Our NMR relaxometry findings were in correlation with the flow behavior and particle size results of the investigated emulsion systems.

A growing demand for alternative sources of texturized vegetable protein (TVP) has resulted from various factors including plant allergies, perceived health risks associated with genetically modified organisms (GMO), animal welfare beliefs, and lifestyle choices. Soy and wheat have been the primary ingredients in TVP over the past few decades, but desires for clean label ingredients (especially non-GMO and nonallergenic) have led to demand for alternative plant protein ingredients such as pea protein. To understand the capabilities of pea protein to create meat-like texture with additions of another protein source that also contributes starch, this study focused on extruding pea protein with increasing amounts of chickpea flour (CPF). Six treatments, with inclusions of CPF ranging from 0 to 50%, were processed on a twin-screw extruder to determine the optimal ratio of pea protein isolate to CPF. Bulk density was the greatest with 20% CPF (272 g/L) and resulted in the lowest water holding capacity (55.5%). Texture profile analysis (TPA) hardness, springiness, and chewiness showed optimum results for the 10 and 20% CPF (674 to 1024 g, 72.1 to 80.7%, 400 to 439, respectively). With no CPF addition, protein interactions created a strong network exhibiting extreme springiness (91.3%). Addition of CPF greater than 20% resulted in a detrimental decrease in hardness by 38 to 84% and chewiness by 73 to 92%. Phase transition analysis and specific mechanical energy data provided a greater understanding of the degree of texturization during extrusion. Inclusion of CPF between 10 and 20% led to the optimum protein to starch ratio, allowing adequate protein texturization and creating product characteristics that could potentially mimic meat. PRACTICAL APPLICATION: Pea protein was mixed with increasing levels of chickpea flour to produce a textured plant protein product using extrusion technology. The ratio of protein to starch can be optimized to target specific textural attributes of textured pea protein to closely mimic different meat products like fish, chicken, or beef. The 10 and 20% chickpea flour treatments produced the highest quality products according to textural attributes.

Grape pomace is a major wine industry byproduct. Extraction of volatile compounds from grape pomace is rarely explored. A cost-effective method was developed in this study for aroma compounds extraction from grape pomace with the potential for industrial application. Based on the solvent extraction procedure, experimental factors including pretreatment, enzymatic hydrolysis time, solvent concentration and distillation time were investigated to optimize the extraction process. Volatile compounds of the pomace extract were analyzed using headspace solid-phase microextraction gas-chromatography mass spectrometry (HS-SPME-GC-MS) method. Results revealed that enzymatic hydrolysis was the optimal pretreatment method. A maximum extraction efficiency was achieved under 48 hr of enzymatic hydrolysis, 70% of ethanol concentration and 20 min of distillation. A total of 65 volatile compounds were identified in the extract, including 16 alcohols, 1 alkane, 1 aldehyde, 9 esters, 3 ketones, 4 phenols, 6 terpenes, and 1 furan, of which 15 volatiles were determined as odor-active compounds. This study developed a feasible extraction technique to recycle the underutilized byproducts from wine industry to produce aroma/flavor food additives. PRACTICAL APPLICATION: This study develops a cost-effective method for aroma compounds extraction from grape pomace with the potential for industrial application as food additives.

In this study, the bubbles in rice flour batter were investigated under a constant temperature, because the bubble size distribution is important for the control of food texture. We obtained experimental data using a hand mixer and compared the properties of doughs prepared using six rice flours; each flour was prepared through a different milling process. We also added the size effect of the rice flour particles as the Bond number. Furthermore, we performed a dynamic wettability test to estimate the wettability of the rice flour surface. The results of this test were described well by the Washburn equation, and dccosθ/dp was calculated as a wettability parameter (where, dc = effective diameter of a capillary in a powder bed, cosθ = the contact angle, dp = mean particle diameter of rice flour). If bubble sizes depend mainly on the inertial force, viscous force, surface tension, and gravity, then the normalized mean bubble diameter should be a function of the Reynolds number, Weber number, and Froude number. The mean bubble diameter (dbm) generated by whipping was expected to be affected by the thickness (d) of the rod of the mixer, its movement speed, and physical properties of the material. Therefore, dimensionless mean diameter (dbm/d) was expressed based on a dimensionless equation. In the three‐phase dispersion, different empirical equations were obtained depending on the amount of rice flour added, and the bubble diameter could be predicted using dimensionless parameters. In addition, the equations were generally applicable to the various materials selected for this study. Practical Application The powder properties of rice flour were investigated, and dimensionless parameters were analyzed to construct an appropriate process control system for rice flour‐based food products. Although the process method optimized for flour products is also used for rice flour products in practical situations, the comprehensive evaluation based on dimensionless parameters leads to optimization of the process for rice‐flour based products. Moreover, this optimization might strongly support the creation of a new texture, and thus, the potential for market expansion of rice‐flour based products is considerable.

In this study, a novel approach to prepare spray-dried encapsulated curcumin powder was investigated. The effects of surfactants viz. Tween 80 (at 0.25 to 0.75% wt) and lecithin (at 1% wt) and of a stabilizer viz. chitosan (at 0 to 0.375% wt) on the characteristics of curcumin-based emulsions as well as on physicochemical properties of the resulting spray-dried encapsulated powder were determined. The optimal emulsion was noted to be the one formulated with 0.50 and 0.25% wt, respectively, of Tween 80 and chitosan (T0.50/C0.25). Spray-dried powder prepared from the optimal emulsion was compared to that prepared from an emulsion with 0.5% Tween 80 and 0% chitosan (T0.50/C0.00), as well as that from an emulsion with 0.25% Tween 80 and 0.25% chitosan (T0.25/C0.25). Physical properties of all powders were not significantly different. However, the encapsulation efficiency of T0.50/C0.25 powder (72.28%) was significantly higher than those of T0.50/C0.00 (47.19%) and T0.25/C0.25 powder (51.61%). Ferric reducing antioxidant powers of T0.50/C0.25 and T0.25/C0.25 powders were comparable but significantly higher than that of T0.50/C0.00 powder. After reconstitution, the mean particle sizes of T0.50/C0.25 and T0.25/C0.25 remained unchanged due to the protection by chitosan. T0.50/C0.00 powder was noted to exhibit the highest bioaccessibility (89.32%) in the simulated gastrointestinal tract. PRACTICAL APPLICATION: The results of this study can be used as a guideline to develop a stable formulation of curcumin feed emulsion that can later be transformed into an encapsulated powdery form via spray drying. Such a guideline should prove useful for a company looking for a way to produce high-quality functional ingredients and/or products from curcumin.

The objective of this study was to examine the effect of gamma irradiation (0, 2.5, and 5 kGy) on physico-mechanical and structural characteristics of films based on Farsi gum-carboxymethyl cellulose supplemented with Ziziphora clinopodioides essential oil (ZEO; 0%, 1%, and 2%) and lignocellulose nanofibers (LCNF; 0%, 1%, and 2%), and their application on fresh minced beef meat's shelf-life during refrigerated temperature (4 ± 1 °C) for 16 days. Gamma irradiation under the 60 Co source at 2.5 and 5 kGy doses did not have a significant effect on thickness, tensile strength, swelling index, oxygen permeability, and water vapor transmission rate of prepared films (P > 0.05). The best microbiological (total viable count, psychrotrophic bacterial count, Pseudomonas spp., Brochothrix thermosphacta, lactic acid bacteria, and Enterobacteriaceae) and chemical (thiobarbituric acid reactive substances, total volatile base nitrogen content, and peroxide value) properties were recorded for samples packaged with ZEO 2% + LCNF 2%, followed by ZEO 2% + LCNF 1%, ZEO 1% + LCNF 2%, and ZEO 1% + LCNF 1%. These results indicate acceptable extensions of hurdle technology for prolonged refrigeration of minced beef meat. PRACTICAL APPLICATION: The application of active packaging films has received considerable interest in extending the shelf-life of perishable foods during prolonged chilled storage. The effects of active Farsi gum-carboxymethyl cellulose films supplemented with Ziziphora clinopodioides essential oil 2% + lignocellulose nanofibers 2% resulted in delaying lipid oxidation and microbial spoilage growth of refrigerated minced beef meat and consequently extending the shelf-life during storage for at least 16 days.

The aim of this study was to examine the physical properties of margarines prepared from oleogels with binary mixtures of candelilla wax (CDW) and beeswax (BW) in soybean oil. Some of the margarines made from oleogels with mixtures of CDW and BW had higher firmness than those made with one wax. For example, a 3% wax margarine made with 25% CDW and 75% BW had significantly higher firmness (0.97 N) than those with 100% CDW (0.59 N) and with 100% BW (0.11 N). Differential scanning calorimetry (DSC) and solid fat content (SFC) analyses revealed eutectic melting properties for binary wax margarines, which may be desirable since wax oleogel-based margarines often have higher melting points than conventional margarines. For example, the major melting point of 3% wax margarine made with 50% CDW and 50% BW was 43.85 °C, while for margarines made with 100% CDW or 100% BW, the melting points were at 46.00% and 47.61 °C, respectively. SFC was lowest for margarines with 50 or 75% BW; for example, 3% wax margarine with 25% CDW and 75% BW had 0.72% SFC at 40 °C while those with 100% CDW and 100% BW had 1.19 and 1.13% SFC, respectively. However, dropping point constantly decreased with increasing BW ratios. This study demonstrated that by mixing two waxes, the firmness of oleogel-based margarines could be increased, and the melting point could be tailored by the ratio of two waxes. PRACTICAL APPLICATION: This study demonstrated that firmness and melting properties of margarines prepared from wax-oleogels can be improved by mixing two waxes, making their practical application more feasible. Firmness of margarines prepared with oleogels of binary mixtures of candelilla wax and beeswax were higher than those with pure waxes. The melting point of wax oleogel-based margarines was decreased by use of binary mixtures of candelilla wax and beeswax.

Seven candidates for starter cultures for cucumber fermentations belonging to the Lactobacillus pentosus and Lactobacillus plantarum species were characterized based on physiological features desired for pickling. The isolates presented variable carbohydrate utilization profile on API® 50CHL test strips. The L. pentosus strains were unable to utilize d-xylose in MRS broth or the M medium. The lactobacilli were unable to produce histamine, tyramine, putrescine, and cadaverine in biogenic amine broth containing the necessary precursors. Production of d-lactic acid by the lactobacilli, detected enzymatically, was stimulated by growth in MRS broth as compared to cucumber juice medium (CJM). The lactobacilli utilized malic acid in the malate decarboxylase medium. Exopolyssacharide biosynthesis related genes were amplified from the lactobacilli. A sugar type-dependent-ropy phenotype was apparent for all the cultures tested in MRS and CJM. The genes associated with bacteriocin production were detected in the lactobacilli, but not the respective phenotypes. The antibiotic susceptibility profile of the lactobacilli mimics that of other L. plantarum starter cultures. It is concluded that the lactobacilli strains studied here are suitable starter cultures for cucumber fermentation. PRACTICAL APPLICATION: The availability of such starter cultures enables the implementation of low salt cucumber fermentations that can generate products with consistent biochemistry and microbiological profile.

This study investigated the effects of preheat treatments on the composition, rheological properties, and the physical stability of soybean oil bodies and examined the stability of coffee containing those oil bodies. Three preheat treatment methods were compared, including heating (at 65, 75, and 85 °C for 30 min) of raw soymilk, high-pressure steam heating (at 110, 120, and 130 °C for 10 s, ultra high temperature [UHT] treated) of dry soybeans, and milling of soaked soybeans in boiling water. Three UHT samples showed the highest oil body yields (13.59 to 13.87%) and protein yield (2.47 to 3.03%), while oil content in extracts was the lowest (30.97 to 46.25%). Soymilk heated at 65 or 75 °C for 30 min showed high oil body extraction yields (13.38 and 11.46%) and the highest oil extraction yields (6.38 to 8.38%) among all the samples. Three UHT samples had a higher average particle size and higher apparent viscosity compared with those of all the other samples. The results from sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and particle size distribution suggested heat treatment at 65 to 85 °C just lead to the partially denaturation and unfolding of storage protein instead of severe aggregation, while UHT (samples 5, 6, and 7) could lead to large amount soluble aggregates within oleosins and storage proteins via disulfide bonds. The diluted emulsion with 12% fat content remained stable during a 15-day storage period at 4 °C. The coffee stability of the diluted oil body emulsion indicated high oleosins and low storage protein content in the oil body was a benefit for the coffee stability. PRACTICAL APPLICATION: Soybean oil bodies are natural sources of pre-emulsified oil derived from soybean and can be dispersed in an aqueous medium to form a stable emulsion system. This study provides the foundation for the preparation and application of soybean oil bodies with differing emulsion stabilities and extraction yields in the food industry.

Natural red pigments have been widely used as food and cosmetics additives. However, due to toxic byproducts or allergen issues, it is still necessary to look for some other red pigment products. This study proposed combinatorial strategies to improve production of a new kind of red pigments from the fungus Geomyces WNF-15A, isolated from Antarctica. A high-production medium was developed by statistical experimental design, which was further simplified for industrial use by single-factor experiments. Strain breeding by atmospheric room temperature plasma mutagenesis generated a mutant, Geomyces sp. WNF-15A-M210, which increased production of red pigments by 24.4% and shortened culture phase by 33.3% comparing with the wild-type. The production of red pigments by this mutant favored a weak alkaline condition but required only mild dissolved oxygen tension. Control of initial pH 8.5 (process pH around 7.5) increased red pigments production by 19% comparing with natural condition. Precursor and inhibitor addition experiments indicated that the red pigments were synthesized by polyketide pathway, and feeding 6 mmol/L precursor of sodium acetate by three aliquots at days 3 to 5 improved biosynthesis of red pigments by 27%. Finally, the developed culture process was verified in a 5-L stirred tank bioreactor. The red pigments production of the pH regulation group reached 1.11-fold of the control and 1.95-fold of the precursor regulation group, respectively. This study provides high-production strain, optimized medium, and bioprocess for the possible industrial production of Antarctic Geomyces red pigments in future. PRACTICAL APPLICATION: Antarctic Geomyces red pigments showed high color value, nontoxic characteristic, and good water solubility. It holds potential for industrial use and is under development for food additive in China currently. This study provides an optional manufacturing process for this new kind of red pigments.

This work aimed to formulate and perform physicochemical and functional characterization of maltodextrin microcapsules containing ethanolic extract of stevia, rich in antioxidant compounds, encapsulated by a spray-drying process with two maltodextrins (DE10 and DE19). The powders were named M10 and M19, respectively. We analyzed the physicochemical parameters, antidiabetic activity, cytotoxicity, bioaccessibility of the compounds by in vitro digestion, as well as the structure of the microcapsules by scanning electron microscopy. Microcapsules showed higher solubility (∼35%), lower moisture content (∼29%), and the maltodextrin DE10 had higher efficiency as an encapsulating agent (87%) when compared to DE19 (76%) and showed well-defined spherical structures. The microencapsulation preserved the content of phenolic compounds and antioxidant activity present in the extract (7.2% and 87.5%, respectively). The bioaccessibility of these microencapsulated compounds and antioxidant activity were higher under different conditions of in vitro digestion (mouth, gastric, and intestinal conditions) and showed no cytotoxic effects. We identified 41 compounds (by UHPLC-MS/MS-Qtof) related to the nutritional benefits offered by stevia and the microencapsulation technique can be recommended to preserve bioactive compounds. PRACTICAL APPLICATION: Ethanol extract from stevia leaves contains antioxidant phytochemicals related to the nutritional benefits of stevia. However, this extract presents low solubility and consequently low bioaccessibility under in vitro digestion. The microencapsulation process protects the bioactive compounds of the different pH from digestion and improves the physical-chemical parameters of the extract, increasing its applicability as a possible food additive.

In this work, a new type of tomato puree was obtained from the whole fruit including seeds and skins without any waste. Currently, the food industry aims to develop products that both bring benefits to consumer health and are ecosustainable. Several efforts in fact have been carried out to revalue tomato by-products, such as seeds and skins, for human use. The physicochemical properties of the whole tomato puree immediately after production and after 6 months of storage were investigated and compared to the properties of a traditional tomato puree. Two tomato varieties were used in this study: Villa Literno and Piccadilly. pH, dry weight, water activity, titratable acidity, reducing sugars, soluble solid, lycopene, polyphenol, and volatile organic compound contents were evaluated. Tomato puree obtained from whole fruits mainly showed higher lycopene (90 to 150 mg/kg), flavonoid (39 to 41 mg/kg), and aldehyde (in particular hexanal) contents and a greater stability over time compared to those of the traditional puree. The proposed process allowed to obtain a tomato puree with a higher content of bioactive compounds, producing no waste. Practical Application: In this study, we proposed a new type of tomato puree made from the whole fruit. The whole tomato puree is richer in phenolic compounds and volatile organic compounds than the traditional puree that is made by removing skins and seeds. It can be an interesting product for the food industries because it is a source of bioactive compounds and reduces to zero the amount of waste.

In recent years, hydrocolloids have been used extensively as enhancers in dough products. However, studies on the effect of hydrophilic polymers on wheat gluten (WG) within the dough are scarce. In the present study, poly-γ-glutamic acid (γ-PGA), a new and healthy food additive, was added to the WG to investigate its effect on hydration, rheological properties, and structures of WG. Results showed that with the addition of γ-PGA, the water-holding capacity (WHC) of WG and the content of bound water increased, whereas the content of immobilized water decreased. In addition, γ-PGA changed the rheological properties of WG. The elastic properties of WG gradually weakened and the viscous properties gradually increased. Furthermore, scanning electron microscopy (SEM) results showed that with the addition of γ-PGA, the structure of the WG network became more uniform and the pore size was smaller. A change also occurred in the secondary structure of WG, in which the α-helix content was significantly reduced while the contents of β-turn angles were significantly increased, thereby suggesting that γ-PGA not only functions as a filler in the WG system, but also interacts with WG. From the present study, we conclude that γ-PGA can interact with WG and water to change the WG secondary structure. γ-PGA can also restrict moisture migration and enhance the WHC of WG, thereby changing the WG microstructure and improving its functional properties. This condition provides the basis for γ-PGA to be recommended as WG enhancer for addition in WG-containing products such as bread, seitan (meat replacement), and others. PRACTICAL APPLICATION: WG performance plays a key role in the quality of flour products. Thus, many studies have been conducted to improve the WG quality to produce highly popular flour products. The results of this study showed that γ-PGA can interact with WG and water, and had a good effect on improving the WHC of WG, which means that γ-PGA has potential usefulness in improving the quality of WG and WG-containing products such as bread, seitan (meat replacement), and others.

High pressure technology (400 MPa at 27 ± 1.5 °C for 10 min) was applied for the processing of jam, and target was the reduction (∼47%) of sugar requirement by using a fiber-rich fruit, that is, sapodilla. Different formulations of jam containing various combinations of pectin (0.5 to 5.0%), sugar (45 to 65%), and acid (0.5 to 1) were investigated for textural, rheological, and sensory properties of the pressure-processed jam. The textural parameters mainly hardness (varied 16 to 594 g force) of the jam samples were significantly (P 0.01) affected by the formulation ingredients viz. sugar and pectin content. Also, an interaction effect (P 0.01) of sugar and pectin was observed on the jam hardness. The rheological parameters (gel strength, K') also varied (1036 to 2852 Pa) with the change in total soluble solids (TSS) and pectin content. However, the samples having lower TSS content (e.g. 45%) and appropriate pectin content (4.0, 4.5, or 5.0%) were similar (P 0.05) to the samples having higher TSS content (65%) and corresponding pectin level (0.5, 1.0, or 1.5%) based on the rheological properties. On the other hand, the samples with middle levels of pectin at the corresponding TSS level (45 to 65%) were highest (score of6 on seven-point hedonic scale) and equally preferred (P 0.05) by the sensory panelist based on overall acceptability calculated from the scores obtained for sensory attributes viz. color, aroma, sweetness, sourness, texture, and spreadability. Therefore, the jam formulation containing sapodilla pulp as a base material, TSS 45%, pectin 4.5%, and citric acid 0.5% was determined to be the preferred formulation for the production of reduced-calorie, pressure-processed jam based on its gel strength, overall acceptability, and storage stability. PRACTICAL APPLICATION: High-fiber fruit was used for the development of a reduced-calorie high pressure processed jam in this study. The inherited or externally added fiber can favor the reduction in sugar requirement of a food product particularly those processed by high pressure, leading to reduction in calories. The findings of this study can be used for the development of novel HPP products with functional properties.

Common beans (Phaseolus vulgaris L.) are rich in starch with a high content of amylose, which is associated with the production of retrograded and pregelatinized starch through thermal treatments. The purpose of this study was to evaluate the composition, morphology, thermal, functional, and physicochemical properties of carbohydrate extracts (CE) obtained from autoclaved (100 and 121 °C) and extruded (90, 105, and 120 °C) black beans. After evaluation of the functional properties, the CE from autoclaved beans at 100 °C for 30 min and 121 °C for 15 min 2×, and extruded beans at 120 °C and 10 rpm, were selected to continue the remaining analysis. Autoclaving treatments at 100 °C for 30 min and 121 °C for 15 min 2× showed a reduction of resistant starch by 14.4% and 26.6%, respectively, compared to dehulled raw bean CE. Meanwhile, extrusion showed a reduction in resistant starch of 54.2%. Autoclaving and extrusion treatments also decreased the dietary fiber content. Extrusion reduced almost entirely the content of α-galactooligosaccharides, in comparison to dehulled raw bean CE. The results showed differences in color and granule morphology. The onset, peak, and conclusion temperatures, transition temperature range, and enthalpy of autoclaved and extruded bean CE were lower than dehulled raw bean CE. The CE from autoclaved and extruded beans contain retrograded and pregelatinized starch, which could be incorporated in food products as a thickening agent for puddings, sauces, creams, or dairy products. PRACTICAL APPLICATION: Thermally treated black bean carbohydrate extracts are rich in starch, fiber, and protein. Because these extracts are already cooked, they can be added to products that do not require a thermal process such as puddings, sauces, creams, or dairy products, acting as a thickening agent.

Delivery of vitamin D3 (VD3 ) in foods should exhibit desirable physicochemical characteristics and improves absorption. In this study, gum arabic (GA) was investigated as a VD3 carrier to encapsulate VD3 . VD3 dissolved in 5 mL ethanol corresponding to 0.3 to 6.0% mass of GA, was blended in 5.0% w/v GA solution, followed by freeze drying. The encapsulation efficiency decreased while loading capacity increased with an increased amount of VD3 . At the highest VD3 level, the loading capacity (3.47%) was the highest, and the encapsulation efficiency (61.24%) was satisfactory, and the treatment was further studied. The magnitude of negative zeta-potential increased from 3.1 to 31.0 mV at pH 2.0 to 7.4. During the 100-day storage at 3 °C of capsules reconstituted at pH 2.0 to 7.4, the hydrodynamic diameter decreased at all pH conditions, most evident for reduction to 81.3 nm at pH 7.4, and no precipitation was observed, indicating the significance of steric repulsion on capsule stability. Bioaccessibility of VD3 in capsules (95.76%) was significantly higher than the nonencapsulated VD3 (68.98%). The in vivo pharmacokinetic study in Sprague-Dawley rats after a single-dose of 300 µg VD3 showed the area-under-curve of serum 25(OHD) level in 48 hr of the encapsulation treatment was 4.32-fold of the nonencapsulated VD3 and more than twice higher than the VD3 -GA physical mixture. During 2-week supplementation of 60 µg VD3 /d, rats receiving capsules or physical mixture had 25(OH)D levels of at least 81 ng/mL higher than that of the nonencapsulated VD3 group. The studied encapsulation system holds great potential as a value-added ingredient to supplement VD3 in beverages with a wide pH range. PRACTICAL APPLICATION: The findings of this study demonstrated the improved dispersion stability and absorption of vitamin D3 after encapsulation in gum arabic. The capsules exhibited good dispersion stability across a pH range between 2.0 and 7.4, showing potential application in beverages. Furthermore, the enhanced absorption of VD3 after encapsulation highlights the nutritional benefits of the studied encapsulation system.

Cranberry pomace obtained from industrial juice production was characterized by proximate composition analysis and monosaccharide profile of the dietary fiber. Extraction of carbohydrates from pomace was investigated using microwave-assisted alkaline method and five commercial biocatalysts (pure endo-galactanase and four multienzyme biocatalysts). The extracts obtained from microwave-assisted approach had average total sugars yield of 21.3% and contained mostly oligosaccharides in the degree of polymerization range of 7 to 10. All multienzyme biocatalysts led to yields similar or higher than microwave-assisted approach (23.4% to 42.0%), but mainly generated shorter oligosaccharides with a degree of polymerization of 2 to 5. Compared to cranberry pomace dietary fiber, microwave-assisted extracts were enriched in pectic oligosaccharides, whereas the enzymatic extracts were enriched in glucans and had less rhamnose and galactose. Pomace ground for 5 min or more by ball mill assumed a powdery consistence. Longer milling did not affect particle size but increased their roughness. Such physical changes had no effect on the efficiency of multienzymatic treatment. PRACTICAL APPLICATION: The increased production of cranberries and cranberry products will continuously generate more pomace, a potentially valuable material for the generation of added-value products. Up to 60% to 70% of cranberry pomace is composed of plant cell wall material. The properties of naturally occurring plant cell wall polysaccharides and their corresponding oligosaccharides have been of a great interest, and many of them find application as functional food ingredients. Despite the fact that the cranberry pomace is rich in plant cell polysaccharides, it has been mainly explored as a source of phenolic antioxidants. This study reveals the efficiency of cranberry pomace as a source of nondigestible oligosaccharides. The use of microwave-assisted extraction and different biocatalysts for the enzymatic extraction led to oligosaccharides with well-defined monosaccharide composition and molecular weight distribution. The study of the effects of these extraction techniques on the yield and the characteristics of generated oligosaccharides would allow the modulation of their properties. As an overall, the findings of this study would contribute to lay the scientific ground for the development of innovative process for the isolation of nondigestible oligosaccharides as functional ingredients from cranberry pomace by products.

This study examined the effects on conformation and oxidation of myofibrillar protein in largemouth bass by different thawing methods. The conventional thawing, microwave thawing, microwave (MVT) or ultrasound combined with vacuum thawing, microwave or far-infrared thawing (FMT) combined with magnetic nanoparticles were used in this experiment. The physicochemical changes were analyzed by differential scanning calorimetry and dynamic rheology. The protein structure changes were measured by Raman, intrinsic fluorescence, and second-derivative ultraviolet spectrometry. The degree of protein aggregation was evaluated by surface hydrophobicity, particle size, and zeta-potential measurements. Total sulfhydryl content, protein carbonyl content, Ca2+ -ATPase activity, and SDS-PAGE were used to analyze the degree of protein oxidation. Results showed that MVT and FMT samples had better thermal stability, more stable protein conformation, and a lower degree of protein oxidation. Thus, these two methods would be beneficial to sustain the quality of thawed fillets. PRACTICAL APPLICATIONS: In the market circulation, largemouth bass (Micropterus salmoides) need to be frozen. The thawing methods can directly affect the quality of frozen fish, thus causing the changes in the conformation of the myofibrillar protein in fish, and also affecting the degree of protein oxidation. The results showed that the microwave combined with vacuum and the magnetic nanoparticles combined with far-infrared thawing had less effect on myofibrillar protein of fish and were a better thawing method.

Oleogels were prepared by emulsion template method through 3.0% tea polyphenol ester (Tp-ester) particles with four fatty acid chain length (Tp-laurate [C12], Tp-myristate [C14], Tp-palmitate [C16], and Tp-stearate [C18]) and 2.5% citrus pectin, and then were used in cookie production as fat replacer. Effects of the fatty acid chain length on the hydrophilicity/hydrophobicity of Tp-ester, on the appearance, microstructure, and firmness of dried products, on rheological features of oleogels, on the dynamic viscoelasticity and textural characteristics of cookies dough, and on cookies qualities were revealed. With the increase in the fatty acid chain length, the θo and θw values of four Tp-esters increased, the firmness of dried products with smaller oil droplets got larger, and the gel intensity of oleogels increased, but the quality scores, spread ratio, and break strength of the cookies did not change significantly. With the increase in the replacement levels of butter with oleogels, the harder cookie dough with weaker gel strength and the softer cookies with lower hedonic scores and crispness were found. At 25% and 50% replacement levels, cookies prepared with oleogels using Tp-palmitate or Tp-stearate particles exhibited similar hedonic scores, break strength, spread ratio, and storage stabilities to that of butter cookies. PRACTICAL APPLICATION: Cookies are relished by all age groups due to their taste and crispness, but include high content of saturated fatty acids that are harmful to people's health. The result of this study will help the industry to better design cookies through oleogels with tea polyphenols ester and pectin, and will provide healthy cookies with little or no butter for consumers.

Triggered by the development of lactic acid bacteria (LAB) during the production of Scotch whisky, this study examined the influence of yeast and LAB inoculation on whisky flavor. Four new spirits were produced using the same process. LAB were added as a form of a Greek yogurt's live culture. In each category (barley and rye), one sample was fermented with Greek yogurt while the other was fermented without it. The spirits were matured and analyzed at five different points. Results from gas chromatography-mass spectrometry (GC-MS) analysis showed basic volatile compounds, along with some important extra compounds with yogurt culture. The most obvious differences were observed in the concentration of butanoic acid, a characteristic acid in spirits undergoing lactic acid fermentation: to identify esters such as ethyl butanoate, ethyl isobutanoate, isoamyl butanoate, and 2-phenylethyl butanoate, they are not typical compounds in whisky.

The aim of this study was the development of innovative candies formulations accordant with the present trends in the confectionery industry. Steviol glycosides, sorbitol, and agave syrup were used as sucrose alternatives, while agar and pectin were included instead of gelatin for the formulation of vegan candies. Additionally, white tea extract was used as a candy base and source of bioactive compounds. Bioactive quality (total phenolic content, antioxidant capacity, epigallocatechin gallate, and caffeine content) and physicochemical (dry matter, springiness, hardness, color) parameters of candies were monitored during 4 months of storage at 4 and 22 °C. Pectin candies with the highest content of dry matter (79.8%) showed the longest shelf life, while those with agar (52.0% and 66.2%) were the most susceptible to spoilage. Candies prepared with agar were less hard (0.4 and 0.6 N) and with less elastic texture (1.5 and 3.4 mm) and showed the highest stability of physicochemical parameters during storage, while those with pectin were also less hard (0.5 N) but with more elastic texture (10.7 mm) than gelatin candies (3.6 and 4.4 mm; 2.4 and 4.1 N). Although gelatin samples were characterized with the greatest bioactive quality parameters immediately after production, they showed a higher instability of the same parameters during storage compared to the agar and pectin candies. PRACTICAL APPLICATION: According to the consumers' demands for healthier confectionery products, formulations of candies with sucrose alternatives, non-animal hydrocolloids, and natural bioactive compounds were developed. Giving a deeper insight into their physicochemical and bioactive properties, this paper could contribute to confectionery industry in development and optimization of formulations in order to obtain candies with desirable and attractive properties.

Yerba Mate (Ilex paraguariensis St. Hill. Aquifoliaceae) is a native South American tree and has a large amount of bioactive compounds. Colorectal cancer (CRC) is one of the so-called westernized diseases and is the third most common cancer in both men and women. Efficient strategies for the treatment of CRC are extensively being explored including dietary intervention. The objective of our research was to evaluate the effects of Yerba Mate extract on cell proliferation, invasive capacity of tumor cells, and angiogenesis. For this, in vitro and in vivo experimentation was carried out using CRC models. The extract was generated by aqueous extraction and prepared according to traditional American procedure of preparing mate infusion. In vitro results showed that the Yerba Mate extract inhibits CT26 and COLO 205 cell proliferation with IC50 values of 0.25 and 0.46 mg/mL, respectively. We demonstrated by TUNEL assay that one of the mechanisms by which Yerba Mate extract decreases cell proliferation is by induction of apoptosis. In a murine syngeneic tumor model, oral administration of Yerba Mate extract in a dose of 1.6 g/kg/day significantly inhibited angiogenesis and tumor growth without affecting biological parameters or body weight. Our findings suggest that Yerba Mate may be a promising agent for the treatment of colon cancer and could be used as an herbal medicine or functional food ingredient. PRACTICAL APPLICATION: Considering the chemical composition and presence of phenolic compounds with their free-radical scavenging activities and bioactivities against colon cancer cells, Yerba Mate can be a promising candidate as healthy food sources in human nutrition, and also be considered a natural source of potential antitumor agents. Taking into account the economic importance of Yerba Mate in Argentina, this vegetable would have a greater commercial value as a functional food.

The combined application of CaCl2 and Alcalase 2.4 L to the aqueous extraction process of peanuts was evaluated as a method to destabilize the oil body (OB) emulsion and improve the oil yield. After adding 5 mM CaCl2 , the oil yield was reached to 92.0% which was similar with that obtained using Alcalase 2.4 L alone, and the required enzyme loading was decreased by approximately 60 times. In addition, the demulsification mechanism during aqueous extraction process was also investigated. Particle size and zeta-potential measurements indicated that the stability of the peanut OB emulsion dramatically decreased when CaCl2 was added. Under these conditions, the demulsification of Alcalase 2.4 L performed was more efficiently. SDS-PAGE results showed that adding CaCl2 changed the subunit structure of the peanut OB interface proteins and promoted the cross-linking among the arachin Ara h3 isoforms, resulting in unstable emulsions.

Mucin 2 (MUC2) is the skeleton of colonic mucus that comprises the physical intestinal barrier. Different dietary polysaccharides may affect colonic mucus at different extents. The effect of pectin on MUC2 production is contradictory. To investigate whether and how pectin affected hosts' colonic mucus, the amount of MUC2 in colon, the cecal, mucosal microbiota, and metabolites profiles were analyzed and compared with inulin. The results showed pectin stimulated the production of MUC2 at a similar level to inulin. Both interventions increased the abundance of cecal Lachnospira and Christensenellaceae_R-7_group, and enhanced the production of specific metabolites including soyasapogenol B 24-O-b-d-glucoside, lucyoside Q, trans-EKODE-(E)-Ib, and 1,26-dicaffeoylhexacosanediol. Additionally, pectin increased the relative abundance (RA) of cecal Lactobacillus, and induced less RA of potentially harmful bacteria such as Helicobacter in mucosal microbiota than inulin. In conclusion, we first reported that pectin and inulin stimulated the mucus formation at a similar level. Two genera of cecal bacteria and four metabolites may play an important role in enhancing the production of MUC2. Moreover, the MUC2 production may be unrelated to several traditional health-beneficial bacteria; pectin possibly performed as good as or better than the inulin in rats' gut.

Different chain lengths diacylglycerols (DAG) (long- and medium-chain) were synthesized from peanut and coconut oils. The effects of DAG with different chain lengths on body fat, blood lipids, and lipid metabolism-related enzymes in the liver and adipose tissue of C57BL/6J mice were investigated. Compared to peanut and coconut oils containing triacylglycerol (TAG), DAG-rich oils can significantly reduce the body weight, kidney weight, serum triglyceride (TG) content, hepatic fatty acid synthase (FAS), and Acetyl-CoA carboxylase (ACC) enzyme levels (p < 0.05) in C57BL/6J mice. Therefore, the effect of coconut oil DAG on improving body fat metabolism was probably due to the impact of DAG. Meanwhile, the body weight and serum TG content in coconut oil DAG group were lower than those in peanut oil DAG group. In addition, the spleen weight, hepatic ACC, and lipoprotein lipase (LPL) enzymes in coconut oil DAG group (0.07 ± 0.01 g, 2.08 ± 0.42 ng/mg pro, and 18.44 ± 5.23 ng/mg pro, respectively) were significantly lower than those in peanut oil DAG group. Although coconut oil DAG and peanut oil DAG have different fatty acid compositions, their effects on lipid metabolism showed no significant changes. Coconut oil DAG (peanut oil DAG) showed the improved lipid metabolism than that of coconut oil (peanut oil), which was probably due to the effect of DAG. PRACTICAL APPLICATION: Peanut and coconut oils are common edible oils. The oil containing DAG synthesized decreased the body weight and lipid accumulation in mice. Coconut oil is rich in medium-chain fatty acids, while peanut oil mainly consists of long-chain fatty acids. Due to the different contents of fatty acids, the synthesized structural lipids have different effects on lipid metabolism. Medium-chain triglycerides were considered as agents to alleviate obesity.