Search

A Schiff base functionalized Cu(II)-based metal-organic framework (MOF) denoted as Cu-L, was developed via a solvothermal method using low-cost starting material, i.e., Schiff base linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid (L). Good crystallinity and thermal stability of synthesized Cu-L was confirmed by the crystallographic and thermogravimetric studies. An excellent photoluminescent properties of Cu-L ensure their suitability for the ultrafast detection of Fe3+ ions and nitrobenzene via a turn-off quenching response. The remarkable sensitivity of Cu-L towards Fe3+ions and nitrobenzene was certified by the low limit of detection (LOD) of 47 ppb and 0.004 ppm, respectively. With incorporated free azine groups, this MOF could selectively capture Fe3+ions and nitrobenzene in aqueous solution. The plausible mechanistic pathway for the quenching in the fluorescence intensity of the Cu-L in the presence of Fe3+ ions and nitrobenzene have been explained in detail through the density functional theory calculations, photo-induced electron transfer (PET), fluorescence resonance energy transfer (FRET), and competitive energy adsorption. This present study open a new avenue to synthesize novel crystalline MOF-based sensing materials from cheap Schiff base linkers for fast sensing of toxic pollutants.

Multifunctional Cu (II)-based Metal Organic Framework (MOF) [Cu3(BTC)2] has been synthesized by a facile electrochemical method. Crystallographic and morphological characterizations of synthesized MOF have been done using Powder X-ray Diffractometer and Scanning Electron Microscope (SEM), respectively, whereas Fourier Transform Infrared Spectroscopy (FT-IR), Energy Dispersive X-ray Spectroscopy (EDS), UV-Vis Absorption Spectroscopy and Energy Resolved Luminescence Spectroscopic studies have been used for the detailed qualitative, quantitative as well as optical analyses. Sharp PXRD peaks indicate the formation of highly crystalline MOF with face centered cubic (fcc) structure. Flakes (average length = 0.71µm and width = 0.10 µm) and rods (average aspect ratio = ((0.1:8.3) µm) like morphologies have been observed in SEM micrographs. The presence of C, O and Cu has been confirmed by EDS analysis. Photocatalytic activity potential of the synthesized MOF has been tested using methylene blue dye (MB) as a test contaminant in aqueous media under sunlight irradiation. Selective and sensitive fluorescent sensing of different Nitroaromatic compounds (NACs) like 4-Nitroaniline (4-NA), 2-Nitroaniline (2-NA), 3-Nitroaniline (3-NA), 4-Nitrotoulene (4-NT), 2,4-Dinitrotoulene (2,4-DNT), 1,3-Dinitrobenzene (1,3-DNB), 2,6-Dinitrotoulene (2,6-DNT) has been done by exploring the photoluminescent behaviour of chemically stable Cu3(BTC)2. Synthesized MOF is extremely sensitive towards 4-NA, which is having PL quenching efficiency of 82.61% with highest quenching rate till reported. Indeed, a large quenching coefficient KSV = 34.02 x 10− 7 M− 1 and correlation coefficient R2 = 0.9962 in KSV plot have been elucidated with limit of detection (LOD) = 0.7544 ppb. The possible ways of luminescence quenching are successfully explained by the combination of Photoinduced Electron Transfer (PET) and Resonance Energy Transfer (RET) mechanisms. Additionally, the Density Functional Theory (DFT) calculations have been employed to support the experimental results. Cu3(BTC)2 fully demonstrates the power of a multi component MOF, which provides a feasible pathway for the design of novel material towards fast responding luminescence sensing and photocatalytic degradation of pollutants.

A simple synchronous fluorescent chemosensor 3-hydroxy-2-(4-methoxyphenyl)-4H-chromen-4-one (3-HC) has been synthesized for the selective analysis of Al3+. On the addition of Al3+, 3-HC displayed a redshift with a change in wavelength of emission maximum from 436 to 465 nm along with enhancement in fluorescence intensity, which formed the basis for its sensitive detection. Under optimized conditions, 3-HC was applied for the determination of Al3+ in the concentration range of 1 × 10-7-1 × 10-6 M. The limit of detection (LOD) and limit of quantification (LOQ) values were found out to be 1.69 × 10-8 and 5.07 × 10-8 M respectively. Further, the developed method was applied for the analysis of Al3+ in real water samples (tap water, bottled water, and tube well water) which showed good recovery values in the range of 95-99.7% with RSD less than 4%.

A facile bottom up synthesis technique is opted for the preparation of novel composite SnO

A Schiff base functionalized Cu(II)-based metal-organic framework (MOF) denoted as Cu-L, was developed via a solvothermal method using low-cost starting material, i.e., Schiff base linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid (L). Good crystallinity and thermal stability of synthesized Cu-L was confirmed by the crystallographic and thermogravimetric studies. An excellent photoluminescent properties of Cu-L ensure their suitability for the ultrafast detection of Fe

A simple pyrazoline-based ‘‘turn off’’ fluorescent sensor 5-(4-methoxyphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4,5-dihydro-1H-pyrazole (PFM) was synthesized and well characterized by different techniques such as FT-IR, 1H-NMR, 13C-NMR, and mass spectrometry. The synthesized sensor PFM was utilized for the detection of Fe3+ ions. Fluorescence emission selectively quenched by Fe3+ ions compared to other metal ions (Mn2+, Al3+, Fe2+, Hg2+, Cu2+, Co2+, Ni2+, Cd2+, Pb2+, and Zn2+ ) via paramagnetic fluorescence quenching and showed good anti-interference ability over the existence of other tested metals. Under optimum conditions, the fluorescence intensity of sensor quenched by Fe3+ in the range of 0 to 3 μM with detection limit of 0.12 μM. Binding of Fe3+ ions to PFM solution was studied by fluorescent titration, revealed formation of 1:1 PFM-Fe metal complex and binding constant of complex was found to be of 1.3 × 105 M−1. Further, the fluorescent sensor has been potentially used for the detection of Fe3+ in environmental samples (river water, tap water, and sewage waste water) with satisfactory recovery values of 99-101%.

Multidentate 1,3,5-benzenetricarboxylic acid (organic linker), Zn (II) based Zn-BTC has been synthesized via electrochemical method. Quantitative and Qualitative analyses of synthesized metal-organic framework (MOF) have been done using Fourier Transform Infrared (FTIR) Spectroscopy, Energy Dispersive X- Ray Spectroscopy (EDS), and Photoluminescence (PL). Powder X-Ray Diffraction (PXRD) and Scanning Electron Microscopy (SEM) have been used for crystallographic and morphologicaltopographical analyses, respectively. Crystallographic studies confirm the formation of face-centered cubic (fcc) crystal structure with good crystallinity. Photo-catalytic activity of synthesized MOF has been tested using Methylene Blue (MB) dye as a test contaminant in aqueous media under sunlight irradiation. Recorded results reveal that the synthesized MOF efficiently degrade MB dye upto 96% under sunlight exposure after 270 min. Photoluminescence studies indicate that Zn-BTC could be used as an efficient material for sensing of nitroaromatic compounds (NACs): 4-Nitroaniline (4-NA), 2-Nitroaniline (2-NA), 3- Nitroaniline (3-NA), 2,4-Dinitrotoulene (2,4-DNT), 4-Nitrotoulene (4-NT) in N,N'-Dimethylformamide (DMF) by fluorescence quenching and shows maximum quenching efficiency towards 3-NA (72.80%). Notably, the variation in luminescence intensity of 3-NA@Zn-BTC shows a linear relationship over its different concentrations from 0-1000 ppb range with K

A Schiff base bis(thiophen-2-yl-methylene)benzene-1, 4-diamine (L) was synthesized and used for selective and sensitive detection of Fe

A simple fluorescent chemosensor 5-(4-methylphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4, 5-dihydro-1H-pyrazole (PY) has been synthesized for the detection of Cd

A simple synchronous fluorescent chemosensor 3-hydroxy-2-(4-methoxyphenyl)-4H-chromen-4-one (3-HC) has been synthesized for the selective analysis of Al

By using Schiff base tricarboxylate ligand 5-(4-carboxybenzylideneamino)isophthalic acid (H 3 CIP), a new imine functionalized copper metal organic framework (MOF) has been synthesized solvothermally. It was fully characterized by Fourier Transform Infrared (FTIR) Spectroscopy, Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS), and elemental mapping techniques. The as-synthesized MOF has been utilized as fluorescent probe for detection of nitro aromatic explosives (NAEs). The results show that the copper MOF can be developed into highly selective and sensitive sensor for detection of TNP in the aqueous medium via the “turn-off” quenching response. The linear fitting of the Stern-Volmer plot for TNP offered large quenching constant of 1.07 × 10 4 M −1 for Cu-MOF indicating the high sensitivity of the sensing process. Outstanding sensitivity of prepared material towards TNP detection was further validated by the low detection limit of 80 ppb (0.35 µM). The detailed mechanistic studies for their mode of action and density functional theory (DFT) calculations reveals that photo-induced electron transfer (PET) and fluorescence resonance energy transfer (FRET) processes, as well as electrostatic interactions ( i.e. H-bonding) are the key factors for the turn-off response toward TNP by this fluorescent sensor. Thus, this new LMOF owing to their high water stability and remarkable functional features are potential candidates which can be developed into selective and sensitive TNP detection devices.

In this work, we report an environment friendly core-shell material based on Carbon Dot core and Molecularly Imprinted Polymer shell as sensor for highly selective fluorescence detection of ketoprofen. The Carbon Dots (CDs) were prepared by a hydrothermal method and the polymer layer around the CDs core was synthesised by sol-gel polymerisation. The prepared material was characterized by Fluorescence Spectroscopy, FT-IR Spectroscopy and Transmission Electron Spectroscopy (TEM). Fluorescence from the Carbon Dots- Molecularly Imprinted Polymer (CDs-MIP) was found to quench selectively in the presence of ketoprofen and quenching effect was found to be greater than for Non-Imprinted Polymer (CDs-NIP) which indicated the potential of CDs-MIP as a fluorescence sensing material for ketoprofen. The imprinting factor was obtained to be 2.35. Under optimized conditions, a linear response was obtained in the concentration range from 0.039 to 3.9 μM with a detection limit of 0.01 μM. The correlation coefficient was 0.999. The developed sensor was applied to determination of ketoprofen in human serum and urine samples with good recoveries ranging from 96 to 104% indicating successful application of the proposed sensor in biological fluids.

A simple, rapid and sensitive constant wavelength synchronous fluorescence method is developed for the determination of danofloxacin (DAN) in pharmaceutical formulations and its residue in milk based on Al(III) enhanced fluorescence. The synchronous fluorescence intensity of the system is measured at 435 nm using ∆ λ = 80 nm and an excitation wavelength of 280 nm. A good linear relationship between enhanced fluorescence intensity and DAN concentration is obtained in the range of 3-100 ng mL(-1)(r (2) = 0.9991). The limit of detection (LOD, S/N = 3) of the present method is 0.9 ng mL(-1). The proposed method can be successfully applied to the determination of DAN in pharmaceutical formulations and in milk without serious interferences from common excipients, metal ions and other co-existing substances. The method can be used as a rapid screening to judge whether the DAN residues in milk exceed Maximum Residue Limits (MRLs) or not.

Amitriptyline.HCl (AMI) and clomipramine.HCl (CMI) react with eosin Y (EY) in pH 3.8 NaAc-AcH buffer solution to form ion association complex which results in quenching of fluorescence of EY and appearance of a new resonance Rayleigh scattering (RSS) spectrum at 620 nm. The spectral characteristics of absorption, fluorescence and RSS spectra have been investigated. The factors influencing the reaction were studied and optimum conditions for the reaction have been determined. Based on fluorescence quenching, a simple and sensitive spectrofluorimetric method for determination of AMI and CMI has been developed. The fluorescence quenching intensity was measured at 550 nm using an excitation wavelength of 310 nm. The calibration graph was found to be rectilinear in the range 0.08-2.0 μg mL(-1) with detection limit of 0.017 μg mL(-1) for AMI and 0.06-2.0 μg mL(-1) with detection limit of 0.015 μg mL(-1) for CMI. The method can be satisfactorily applied to the determination of AMI and CMI in tablets without interference from commonly occurring exicipients. The recovery and RSD values obtained indicate good accuracy and precision of the method. The mechanism of the reaction and fluorescence quenching has also been discussed.