Search

The increasing frequency and severity of wildfires poses human health risks, especially for those within burnt regions. The potential health effects of fire ash on farmworkers in orchards via inhalation exposure after fire is rarely studied. After the 2017 Thomas Fire, in Ventura County (California, USA), fire ash and corresponding soil samples were collected from several impacted orchards and analyzed for eight trace elements (TEs) and 16 polycyclic aromatic hydrocarbons (PAHs). Results indicate that except for mercury (Hg), the concentrations of TEs and PAHs were higher in ash samples compared with the corresponding soil samples. In general, ash samples showed greater potential to expose farmworkers to health risks than the corresponding soil samples. One site had particularly high concentrations of As (778 mg kg−1), Cr (629 mg kg−1), and Cu (499 mg kg−1) in the ash. This location corresponds to a house which was burned during the Thomas Fire, which might have contained chromated copper arsenate as a wood preservative. Therefore, the existence of construction materials in orchards could add hazardous materials to ash deposited on soil. Furthermore, a monitored dust generation experiment was designed to obtain the particle emission factors (PEF) of soil and ash, which is an essential parameter for the calculation of inhalation health risks. A two-fold difference in the PEFs was found between ash and the corresponding soil sample. Hence, health risks through inhalation exposure from fire ash may be underestimated if the default PEF suggested by the US Environmental Protection Agency is used.

The disposal of wood waste treated with chromated copper arsenate (CCA) is a problem in many countries. We have proposed a novel chelating extraction technique for CCA-treated wood using bioxalate, a solution of oxalic acid containing sufficient sodium hydroxide to adjust the pH to 3.2, which is an effective way to obtain an extraction efficiency of 90% for chromium, copper, and arsenic. The purpose of the present study was to investigate the characteristics of bioxalate extraction of CCA-treated wood. Extractions of CCA-treated western hemlock chips with solutions of bioxalate, oxalic acid, and sodium hydroxide were carried out. The use of bioxalate was confirmed as the most effective extraction technique for chromium, copper and arsenic, with an efficiency of 90%. Extraction with simple oxalic acid was ineffective for copper (less than 40% extraction efficiency), but effective for chromium and arsenic, with 90% efficiency. Sodium hydroxide showed a similar tendency, being ineffective for chromium and copper (less than 20% extraction efficiency), but relatively effective for arsenic (around 70-80% efficiency). We also discovered an interesting phenomenon whereby the addition of sodium hydroxide to a simple oxalic acid solution during the oxalic acid extraction progress resulted in dramatically increased extraction efficiency for copper, chromium and arsenic, up to 90%. Although oxalic acid was ineffective for copper extraction, the addition of sodium hydroxide during the oxalic acid extraction process rendered it effective.

Disposal of discarded chromated copper arsenate (CCA)-treated wood in landfills raises concerns with respect to leaching of preservative compounds. When unweathered CCA-treated wood is leached using the toxicity characteristic leaching procedure (TCLP), arsenic concentrations exceed the toxicity characteristic (TC) limit of 5mg/L in most cases. The majority of discarded CCA-treated wood, however, results from demolition activities, where the wood has typically been subjected to weathering. Since preservatives do migrate from the wood during its normal use, leaching characteristics of weathered and aged CCA-treated wood may differ from unweathered wood. To evaluate this, CCA-treated wood removed from service after various degrees of weathering was collected from multiple sources and leached with the TCLP, the synthetic precipitation leaching procedure (SPLP) and California's waste extraction test (WET). Five to seven individual pieces of wood were analyzed from each source. The average TCLP arsenic concentration for the 14 sources ranged from 3.2 to 13 mg/L. The average TCLP concentrations of the 100 wood pieces tested were 6.4, 5.9 and 3.2 mg/L for arsenic, copper and chromium, respectively. Overall, in 60 out of 100 samples tested by the TCLP, arsenic concentrations exceeded 5 mg/L (the TC regulatory value). SPLP leachate concentrations were similar to TCLP concentrations, although copper leached somewhat more with the TCLP. WET leachate concentrations were approximately a factor of 10 higher than TCLP concentrations. Discarded CCA-treated wood, even after exposure to years of weathering, often exceeds the TC limit for arsenic and without the current regulatory exemption would possibly require management as a TC hazardous waste in the US.

The purpose of this study was to investigate the effect of extraction conditions (i.e., culture filtrate concentration, extraction temperature, and extraction time) on the removal of metals from chromated copper arsenate (CCA)-treated wood particles by using an unknown Polyporales sp. KUC8959. As the first research, a 20-run central composite design using response surface methodology was applied to optimize the system and construct the models, which predicted metal removal by bioleaching. The coefficients of determination of fitted models were 0.874–0.989, which indicated that the models can predict the metal removal yield accurately under various conditions. The Cu removal model suggested that the following conditions, culture filtrate concentration of 45.8%, extraction temperature of 34.2 °C, and extraction time of 20.6 h, were required for maximal removal of Cu (82.1%). The model predicted that extraction conditions of increased severity would result in complete removal of Cr and As from CCA-treated wood particles. In order to confirm actual metals removal efficiency, metals extraction was subsequently conducted under optimal bioleaching condition evaluated in this study. By applying the model, we demonstrated 83.9% Cu, 96.0% Cr, and 99.3% As removal from treated wood particles.