Search

The aim of this study was to develop heparin sodium loaded microneedle patches using different compositions of polyvinyl alcohol polymer and sorbitol. A vacuum micromolding technique was used to fabricate microneedle patches while heparin sodium was loaded into needle tips. Physical features of patches were evaluated by measuring thickness, width, folding endurance and swelling percentage. Patches were also characterised by optical microscopy and scanning electron microscopy to determine the microneedle length and surface morphologies. A preliminary assessment of the microneedle performance was studied by examining the in-vitro insertion to the parafilm and recording the in-vitro drug release profile. In-vivo activity of patches was confirmed by measuring activated partial thromboplastin time and histological examination of the micropierced skin tissues. Prepared patches were clear, smooth; uniform in appearance; with sharp pointed microprojections and remained intact after 1000 folding. The microneedles were stiffer in nature, as they reproduce microcavities in the parafilm membrane following hand pushing without any structural loss. Insertion study results showed successful insertion of microneedles into the parafilm. Disrupted stratum corneum evident from histological examination confirmed successful insertion of the microneedle without affecting the vasculature. In-vitro release study confirmed ∼92% release of the loaded drug within 120 min. A significant prolongation of activated partial thromboplastin time (4 folds as compared to negative control) was recorded following the application of heparin sodium loaded microneedle patch onto rabbit skin. In conclusion microneedles are a valuable drug delivery system, benefiting the patients with minimal skin invasion and also allowing self-administration of heparin sodium in a sustained release manner for the management of chronic ailments. [ABSTRACT FROM AUTHOR]

The aim of this study was to fabricate Bacillus Calmette–Guérin (BCG)-loaded microneedle patches using micromould casting technique and compare their efficacy with the injectable counterparts. The microneedle patches were formulated using sodium alginate (10% w/v) and trehalose (20% of polymer). The patches were characterised using optical microscopy, scanning electron microscopy and folding endurance. Serum IgG, TLC, granulocyte count, lymphocyte count and CRP were assessed and results were compared to that of intradermal injections alongside controls. The results showed that polymeric patches had a thickness of 0.8 mm, microneedle projections of 272 ± 12 µm and folding endurance of more than 300. Based on haematological and IgG ELISA assays, microneedle-based BCG administration significantly activated the immune cells and induced production of lymphocytes, granulocytes and peptide-specific IgG in immunised rats that were comparable to injectable counterparts. There was an increase in IgG antibodies from 3 g/L to 5.98 g/L and an increase in leucocytes from 2.6 × 109/L to 18.45 × 109/L. There was also an increase in granulocytes from 14.4% to 29.15% and lymphocyte count from 58.75% to 85.3%. It was concluded that BCG-coated polymeric microneedle patches are suitable for the transdermal delivery of vaccine without inducing discomfort usually observed with injections. [ABSTRACT FROM AUTHOR]

Dexibuprofen (DXIBN) transdermal patches were formulated using various concentrations of selected polymeric excipients (matrix material; ethyl cellulose and polyvinylpyrrolidone, plasticizer (di-N-butyl phthalate), and a conventional permeation enhancer (almond oil)). Initial patch formulations were evaluated for their physiochemical properties (thickness, moisture uptake, final moisture content, and DXIBN content). Also, impact of patch components on resulting tensile strength andin vitropermeation were used to predict an optimal patch formulation using a quality-by-design (QbD) approach, which was subsequently evaluated and further compared with a commercial oral tablet dosage form forin vitroandin vivorelease (rabbit model). Initially formulated patches demonstrated uniform thickness (0.44 ± 0.02 cm), relatively low moisture uptake (7.87 ± 1.11 w/w %), and highly acceptable drug loading values (100.0 ± 0.026%). The tensile strength of patches increased significantly with matrix polymer concentration and to a lesser degree with increase in plasticizer and permeation enhancer content, although these affected the permeation of DXIBN. Predicted properties (tensile strength and DXIBN steady-state flux) for the QbD-optimized formulation were in close agreement to experimental results. The QbD optimal patch formulation behavior differed significantly from the commercial tablet formulationin vivo.Such model-based predictions (QbD approach) will reduce cost and time in formulation development sciences. [ABSTRACT FROM PUBLISHER]