Search

The list of standard abbreviations for JDS is available at adsa.org/jds-abbreviations-24. Nonstandard abbreviations are available in the Notes. Due to its beneficial effects on human health, Bifidobacterium is commonly added to milk powder. Accurate quantification of viable Bifidobacterium is essential for assessing the therapeutic efficacy of milk powder. In this study, we introduced a novel propidium monoazide (PMA)-antibiotic fluorescence in situ hybridization (AFISH)-flow cytometry (FC) method to rapidly and accurately quantify viable Bifidobacterium cells in milk powder. Briefly, Bifidobacterium cells were treated with chloramphenicol (CM) to increase their rRNA content, followed by staining with RNA-binding oligonucleotide probes, based on the AFISH technique. Then, the DNA-binding dye PMA was used to differentiate between viable and nonviable cells. The PMA-AFISH-FC method, including sample pretreatment, CM treatment, dual staining, and FC analysis, required approximately 2 h and was found to be better than the current methods. This is the first study to implement FC combined with PMA and an oligonucleotide probe for detecting Bifidobacterium. [Display omitted] [ABSTRACT FROM AUTHOR]

ABSTRACT: Due to its beneficial effects on human health, Bifidobacterium is commonly added to milk powder. Accurate quantification of viable Bifidobacterium is essential for assessing the therapeutic efficacy of milk powder. In this study, we introduced a novel propidium monoazide (PMA)-antibiotic fluorescence in situ hybridization (AFISH)-flow cytometry (FC) method to rapidly and accurately quantify viable Bifidobacterium cells in milk powder. Briefly, Bifidobacterium cells were treated with chloramphenicol (CM) to increase their rRNA content, followed by staining with RNA-binding oligonucleotide probes, based on the AFISH technique. Then, the DNA-binding dye PMA was used to differentiate between viable and nonviable cells. The PMA-AFISH-FC method, including sample pretreatment, CM treatment, dual staining, and FC analysis, required approximately 2 h and was found to be better than the current methods. This is the first study to implement FC combined with PMA and an oligonucleotide probe for detecting Bifidobacterium.

Contamination of dairy powders with sporeforming bacteria is a concern for dairy processors who wish to penetrate markets with stringent spore count specifications (e.g., infant powders). Despite instituted specifications, no standard methodology is used for spore testing across the dairy industry. Instead, a variety of spore enumeration methods are in use, varying primarily by heat-shock treatments, plating method, recovery medium, and incubation temperature. Importantly, testing the same product using different methodologies leads to differences in spore count outcomes, which is a major issue for those required to meet specifications. As such, we set out to identify method(s) to recommend for standardized milk powder spore testing. To this end, 10 commercial milk powders were evaluated using methods varying by (1) heat treatment (e.g., 80°C/12 min), (2) plating method (e.g., spread plating), (3) medium type (e.g., plate count milk agar), and (4) incubation time and temperature combinations (e.g., 32°C for 48 h). The resulting data set included a total of 48 methods. With this data set, we used a stepwise process to identify optimal method(s) that would explain a high proportion of variance in spore count outcomes and would be practical to implement across the dairy industry. Ultimately, spore pasteurized mesophilic spore count (80°C/12 min, incubated at 32°C for 48 h), highly heat resistant thermophilic spore count (100°C/30 min, incubated at 55°C for 48 h), and specially thermoresistant spore enumeration (106°C/30 min, incubated at 55°C for 48 h) spread plating on plate count milk agar were identified as the optimal method set for reliable enumeration of spores in milk powders. Subsequently, we assessed different powder sampling strategies as a way to reduce variation in powder spore testing outcomes using our recommended method set. Results indicated that 33-g composite sampling may reduce variation in spore testing outcomes for highly heat resistant thermophilic spore count over 11-g and 33-g discrete sampling, whereas there was no significant difference across sampling strategies for specially thermoresistant spore enumeration or spore pasteurized mesophilic spore count. Finally, an interlaboratory study using our recommended method set and a modified method set (using tryptic soy agar with 1% starch) among both university and industry laboratories showed increased variation in spore count outcomes within milk powders, which not only was due to natural variation in powders but also was hypothesized to be due to technical errors, highlighting the need for specialized training for technicians who perform spore testing on milk powders. Overall, this study addresses challenges to milk powder spore testing and recommends a method set for standardized spore testing for implementation across the dairy industry. [ABSTRACT FROM AUTHOR]

Whole milk powder (WMP) is a universal raw material component that can overcome the problem of seasonality of raw milk. It can be used to provide high-nutritional products to remote areas experiencing a raw milk shortage. Its long shelf life depends on the conditions of storage and transportation, which are recommended to be carried out in a range from 0 to 10°C. At higher temperatures, the quality of WMP deteriorates because of a substantial increase in the degradation of fat and protein fractions. A range of low negative temperatures for storage have not been systematically investigated. Previous studies have shown that freezing WMP results in protein denaturation, crystallization of lactose, and extraction of free fat, all of which reduce the quality characteristics of the product, including deterioration of solubility, quick rancidification, and microbiological changes. However, these previous studies did not simulate the possible situations of transportation and storage of milk powder at low negative temperatures that occur in practice. Given the volume of transportation, distances and climatic characteristics of transportation routes play an important role in WMP preservation. In this study, we simulated storage and transport of WMP at −20°C. The samples were periodically thawed to 10 and 20°C and examined for physicochemical, functional-technological, thermodynamic, microbiological, and organoleptic parameters. Based on our results, storage of WMP at −20°C for 40 d did not have a significant effect on its qualitative characteristics. We observed some compaction of product structure and clustering or clumping, which was reversible by slight mechanical impact. Artificial contamination of the packaging surface with yeast and molds, followed by thawing of the samples, indicated the absence of the contaminants, which was explained by possible redistribution of moisture in the system. [ABSTRACT FROM AUTHOR]

Dairy products are important sources of nutrients for human health and in recent years their consumption has increased worldwide. Therefore, the food industry is interested in applying analytical technologies that are more rapid and cost-effective than traditional laboratory analyses. Infrared spectroscopy accomplishes both criteria, making real-time determination feasible. However, it is crucial to ensure that prediction models are accurate before their implementation in the dairy industry. In the last 5 yr, several papers have investigated the feasibility of mid- and near-infrared spectroscopy to determine chemical composition and authenticity of dairy products. Most studies have dealt with cheese, and few with yogurt, butter, and milk powder. Also, the use of near-infrared (in reflectance or transmittance mode) has been more prevalent than mid-infrared spectroscopy. This review summarizes recent studies on infrared spectroscopy in dairy products focusing on difficult to determine chemical components such as fatty acids, minerals, and volatile compounds, as well as sensory attributes and ripening time. Promising equations have been developed despite the low concentration or the absence of specific absorption bands (or both) for these compounds. [ABSTRACT FROM AUTHOR]

The extraction of high-quality DNA from processed dairy products is often the crucial step in an authentication process by PCR-based methods. In this study, we optimized a novel DNA extraction method for milk powder and used the extracted DNA for identification of milk powder based on PCR analysis. The DNA quality was assessed by amplifying target sequences from mitochondrial genes, as well as by monitoring the yield, purity, and integrity of the extracted DNA. In addition, a laboratory adulteration model of milk powder was detected by PCR-based methods (PCR and real-time PCR) using primers targeting the mitochondrial 12S rRNA gene. Results showed that a sufficient amount and quality of DNA could be isolated from milk powder with this method. Both PCR and real-time PCR detection of cow milk compositions in goat milk powder further confirmed the DNA extracted with this extraction method could be widely used in addressing milk powder adulterant by a PCR-based method. [ABSTRACT FROM AUTHOR]

Milk powder is an important source of protein for adults and children. Protein is very sensitive to heat, which may influence people's usage of nutrients in milk powder. In this study, we describe the temperatureinduced secondary structure of protein in milk powders. In this study, whole milk powder containing 24% protein and infant formula containing 11% protein were heated from 25 to 100°C. Attenuated total reflectance (ATR) spectra in the mid-infrared range 400-4,000 cm-1 were used to evaluate the heat effect on the secondary structure of protein in these 2 milk powders. The spectral changes as a function of temperature were maintained by difference spectra, second-derivative spectra and Gauss curve-fitted spectra. The secondary structures of protein in the whole milk powder began to change at 70°C and in the infant formula at 50°C. The β-sheet and β-turn structures in the whole milk powder both decreased in the range of 70 to 85°C, whereas α-helix structures increased. The loss of β-sheet and β-turn may contribute to the formation of α-helix in the whole milk powder. In infant formula powder, the β-sheet structure showed a decrease and then increase, whereas the β-turn structure showed an increase and then decrease in the range of 50 to 75°C, and no change was found for α-helix structures. This implies that heating may induce the transformation from β-sheet to β-turn. Overall, whole milk powder had better temperature stability than infant formula powder, probably because of the lower content of lipid in the former than in the latter. These results help us understand the thermal stability of protein in milk powder. [ABSTRACT FROM AUTHOR]

Staphylococcus aureus is a spherical, gram-positive, pathogenic bacterium commonly associated with bovine mastitis and clinical infections. It is also recognized as a pathogen that causes outbreaks of food poisoning. The objective of this study was to develop and evaluate a rapid and reliable technique that combines propidium monoazide (PMA) staining with real-time quantitative (q)PCR to detect and quantify viable cells of Staph. aureus in milk powder and meat products. The inclusivity and exclusivity of the assay were evaluated using 58 strains belonging to 14 species. Serial dilutions of Staph. aureus cells were used to establish a standard curve and to confirm the effect of PMA treatment. Milk powder and meat products were used as the spiked foods, and the ability of PMA-qPCR to eliminate nonviable cells was determined in milk powder. Furthermore, meat products were inoculated with different concentrations of Staph. aureus and 105 cfu/g of Bacillus cereus and Salmonella enterica to test the interference by nontarget microorganisms. When PMA treatment was applied before DNA extraction, we were able to eliminate false-positive results with little effect on viable cells. The PMA-qPCR assay was specific and more sensitive than conventional PCR, and the level of detection was 3.0 x 10² cfu/g in spiked milk powder. Additionally, we observed no significant interference for the detection of viable Staph. aureus from other nontarget bacteria. The PMA-qPCR protocol is an effective and rapid method to quantify viable cells of Staph. aureus in food samples. The PMA-qPCR assay is specific and reliable, offering a valuable diagnostic tool for routine analysis in food and clinical diagnostic research at a reasonable cost. [ABSTRACT FROM AUTHOR]

A method for simultaneous determination of the 30 organochlorine pesticides (OCP) in milk and milk powder samples has been developed. Prior to the gas chromatography-tandem mass spectrometric analysis, the residual OCP in samples were extracted with n-hexane and acetone mixture (1/1, vol/vol) and cleaned up by gel permeation chromatography and solid phase extraction. Selected reaction monitoring mode was used for gas chromatography-tandem mass spectrometric data acquisition to identify and quantify the OCP. To avoid the matrix effects, matrix-matched calibration solutions ranging from 2 to 50 ng/mL were used to record the calibration curve. Limits of quantification of all OCP were 0.8 μg/kg. With the exception of endrin, limits of quantification are significantly lower than maximum residue limits set by the European Union and China. The average recoveries were in the range of 70.1 to 114.7% at 3 spiked concentration levels (0.8, 2.0, and 10.0 μg/kg) with residual standard deviation lower than 12.9%. The developed method was successfully applied to analyze the OCP in commercial milk products. [ABSTRACT FROM AUTHOR]

Dairy powder products (e.g., sweet whey, nonfat dry milk, acid whey, and whey protein concentrate-80) are of economic interest to the dairy industry. According to the US Dairy Export Council, customers have set strict tolerances (<500 to <1,000/g) for thermophilic and mesophilic spores in dairy powders; therefore, understanding proliferation and survival of sporeforming organisms within dairy powder processing plants is necessary to control and reduce sporeformer counts. Raw, work-in-process, and finished product samples were collected from 4 dairy powder processing facilities in the northeastern United States over a 1-yr period. Two separate spore treatments: (1) 80°C for 12 min (to detect sporeformers) and (2) 100°C for 30 min (to detect highly heat resistant sporeformers) were applied to samples before microbiological analyses. Raw material, work-in-process, and finished product samples were analyzed for thermophilic, mesophilic, and psychrotolerant sporeformers, with 77.5, 71.0, and 4.6% of samples being positive for those organisms, respectively. Work-in-process and finished product samples were also analyzed for highly heat resistant thermophilic and mesophilic sporeformers, with 63.7 and 42.6% of samples being positive, respectively. Sporeformer prevalence and counts varied considerably by product and plant; sweet whey and nonfat dry milk showed a higher prevalence of thermophilic and mesophilic sporeformers compared with acid whey and whey protein concentrate-80. Unlike previous reports, we found limited evidence for increased spore counts toward the end of processing runs. Our data provide important insight into spore contamination patterns associated with production of different types of dairy powders and support that thermophilic sporeformers are the primary organism of concern in dairy powders. [ABSTRACT FROM AUTHOR]

Airborne communities (mainly bacteria) were sampled and characterized (concentration levels and diversity) at 1 outdoor and 6 indoor sites within a Swiss dairy production facility. Air samples were collected on 2 sampling dates in different seasons, one in February and one in July 2012 using impaction bioaerosol samplers. After cultivation, isolates were identified by mass spectrometry (matrix-assisted laser desorption/ionization-time-of-flight) and molecular (sequencing of 16S rRNA and rpoB genes) methods. In general, total airborne particle loads and total bacterial counts were higher in winter than in summer, but remained constant within each indoor sampling site at both sampling times (February and July). Bacterial numbers were generally very low (<100 cfu/m³ of air) during the different steps of milk powder production. Elevated bacterial concentrations (with mean values of 391 ± 142 and 179 ± 33 cfu/m³ of air during winter and summer sampling, respectively; n = 15) occurred mainly in the "logistics area," where products in closed tins are packed in secondary packaging material and prepared for shipping. However, total bacterial counts at the outdoor site varied, with a 5- to 6-fold higher concentration observed in winter compared with summer. Twenty-five gram-positive and gram-negative genera were identified as part of the airborne microflora, with Bacillus and Staphylococcus being the most frequent genera identified. Overall, the culturable microflora community showed a composition typical and representative for the specific location. Bacterial counts were highly correlated with total airborne particles in the size range 1 to 5 µm, indicating that a simple surveillance system based upon counting of airborne particles could be implemented. The data generated in this study could be used to evaluate the effectiveness of the dairy plant's sanitation program and to identify potential sources of airborne contamination, resulting in increased food safety. [ABSTRACT FROM AUTHOR]

The objective of this study was to examine the possibility of applying visible and near-infrared spectroscopy to the quantitative detection of irradiation dose of irradiated milk powder. A total of 150 samples were used: 100 for the calibration set and 50 for the validation set. The samples were irradiated at 5 different dose levels in the dose range 0 to 6.0 kGy. Six different pretreatment methods were compared. The prediction results of full spectra given by linear and nonlinear calibration methods suggested that Savitzky-Golay smoothing and first derivative were suitable pretreatment methods in this study. Regression coefficient analysis was applied to select effective wavelengths (EW). Less than 10 EW were selected and they were useful for portable detection instrument or sensor development. Partial least squares, extreme learning machine, and least squares support vector machine were used. The best prediction performance was achieved by the EW-extreme learning machine model with first-derivative spectra, and correlation coefficients = 0.97 and root mean square error of prediction = 0.844. This study provided a new approach for the fast detection of irradiation dose of milk powder. The results could be helpful for quality detection and safety monitoring of milk powder. [ABSTRACT FROM AUTHOR]

Understanding the formation of oxidized flavor will be highly useful in the improvement of milk powder quality. Effects of preheating, concentration and spray-drying on the particle characteristics and the oxidized flavor stability of milk powder were investigated. The surface composition and free radicals were analyzed using x-ray photoelectron spectroscopy and electron spin resonance spectrometry, respectively. The concentrations of selected oxidized volatiles hexanal and 2-heptanone were determined using solid-phase microextraction gas chromatography-mass spectrometry. Levels of hexanal and 2-heptanone in fresh milk powder were higher than those in raw milk and heated milk, which drastically increased with increasing time of storage. Differences in the morphological observations, free fat, and surface composition of fresh milk powder were found among different heat-related processes. During storage, a radical (g value, a characteristic constant whose value serves to identify any given free radical, was 2.0054) was detected in milk powder. The specific population of the radical increased from 2.99 x 107 at 3 mo to 1.23 x 108 at 6 mo of storage. Addition of ascorbic acid in milk powder changed the type of radicals and reduced the oxidation off-flavor. According to the Pearson correlations, not the surface compositions but the morphological characteristics of milk powder particles should be considered in maintaining the stability of oxidized flavor in storage. [ABSTRACT FROM AUTHOR]

The objective of the present research was to evaluate commercially available milk powders according to their protein oxidative modifications and antioxidant capacity, and to evaluate if these characteristics are related to physical quality parameters such as dispersibility or stability during storage. Fifteen commercially processed spray-dried milk powders were evaluated: 6 whole milk powders (WMP), 4 skim milk powders (SMP), and 5 infant formula powders (IFP). Protein oxidative status was measured as protein carbonyl (PC) content, dityrosine content, and extent of protein polymerization. The level of PC was slightly lower in SMP than in WMP, whereas IFP had more than twice as much PC as WMP (2.8 ± 0.4, 2.1 ± 0.2, and 6.5 ± 1.3 nmol/ mg of protein for WMP, SMP, and IFP, respectively). No differences were detected in dityrosine accumulation. Although all the possible pairs of parameters were tested for correlations, we found that 4 parameters were linked: PC, whey content, protein aggregate level, and dispersibility. After 9 mo of storage at -20°C or room temperature, all milk samples were analyzed to evaluate changes in protein oxidative status (PC, dityrosine, and protein integrity) and related parameters. Compared with the initial condition, PC increased in all tested samples after 9 mo of storage at -20°C or at room temperature. Stored milk powders had increased PC and decreased dispersibility compared with prestorage levels. Our results highlight the importance of protein oxidative status in milk powder and its relationship to other related quality parameters, such as protein integrity and dispersibility. Our findings suggest that the understanding of such relationships could help in developing quality differentiation for different types of milk powders in the product market. [ABSTRACT FROM AUTHOR]

Several outbreaks of Cronobacter spp. (Enterobacter sakazakii) have been described as food-borne illness in neonates and infants. Powdered infant formula has been identified as a source of infection, especially in hospital nurseries, where a bulk of formula nutrient is prepared for the whole day and instructions for preparation are not always followed correctly. Neonates who are underweight or immunosuppressed are especially at risk for an E. sakazakii infection. Considering that milk powder is the main ingredient of powdered infant formula, we analyzed the incidence and distribution of E. sakazakii in a milk powder-producing plant. We looked specifically at the spray-drying towers and roller dryers. Selected isolates from samples taken from the environment and final product were typed by pulsed-field gel electrophoresis to investigate the epidemiology of the organism within the production area of the plant. Seven pulsed-field gel electrophoresis types were detected in the spray-drying area, which presumably entered the plant through an aperture for process air and an improperly controlled roller shutter. Furthermore, textile filters for exhaust air of both the spraydrying towers were identified as internal reservoirs of the pathogen. For economic reasons, powder from the textile filters is reintroduced into the product flow; this can contaminate the final product. For the production of milk powder to be used as an ingredient of powdered infant formula, it was suggested to terminate the process of reintroducing the filtered powder into the product flow. A second transmission route was identified in the roller dryer section of the factory. It could be shown that contaminated milk concentrate could pass the process unheated, thus leading to a contamination of the product with E. sakazakii. [ABSTRACT FROM AUTHOR]

The aim of the present paper was to provide new insight into the short-wave near-infrared (NIR) spectroscopic analysis of milk powder. Near-infrared spectra in the 800- to 1,025-nm region of 350 samples were analyzed to determine the brands and quality of milk powders. Brand identification was done by a least squares support vector machine (LS-SVM) model coupled with fast fixed-point independent component analysis (ICA). The correct answer rate of the ICA-LS-SVM model reached as high as 98%, which was better than that of the LS-SVM (95%). Contents of fat, protein, and carbohydrate were determined by the LS-SVM and ICA-LS-SVM models. Both processes offered good determination performance for analyzing the main components in milk powder based on short-wave NIR spectra. The coefficients of determination for prediction and root mean square error of prediction of ICA-LS-SVM were 0.983, 0.231, and 0.982, and 0.161, 0.980, and 0.410, respectively, for the 3 components. However, there were less than 10 input variables in the ICA-LS-SVM model compared with 225 in the LS-SVM model. Thus, the processing time was much shorter and the model was simpler. The results presented in this paper demonstrate that the short-wave NIR region is promising for fast and reliable determination of the brand and main components in milk powder. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the potential of the infrared spectroscopy technique for nondestructive measurement of fat content in milk powder. Fat is an important component of milk powder. It is very important to be able to detect the fat content in milk powder using a rapid and nondestructive method. Near and mid infrared spectroscopy techniques were used to achieve this purpose. Least-squares support vector machine (LS-SVM) was applied to developing the fat-content prediction model based on the infrared spectral transmission values. The results based on LS-SVM were better than those of back-propagation artificial neural networks. The determination coefficient for prediction of the results predicted by the LS-SVM model was 0.9796 and the root mean square error was 0.836708. It was concluded that infrared spectroscopy technique could quantify the fat content in milk powder rapidly and nondestructively. The process is simple and easy to operate. Moreover, the prediction results were compared between near infrared and mid infrared spectral data. The results showed that the performances of model with both mid infrared and near infrared spectral data were a little worse than that of the whole infrared spectral data. The results could be beneficial for designing a simple and nondestructive spectral sensor for the quantification of fat content in milk powder. [ABSTRACT FROM AUTHOR]

Presents abstracts of several studies on the chemistry of dairy foods. "Storage Stability of Lutein in Cheddar Cheese," by S. T. Jones, K. J. Aryana and J. N. Losso; "Probiotic, Fiber Fortified, Fat Free Plain Yogurt," by K. J. Aryana; "Effect of Emulsifying Salts on Texture of Pasteurized Process Cheddar Cheese," by N. Shirashoji, J. J. Jaeggi and J. A. Lucey.

The physical characteristics of milk powders used in chocolate can have significant impact on the processing conditions needed to make that chocolate and the physical and organoleptic properties of the finished product. Four milk powders with different particle characteristics (size, shape, density) and "free" milk fat levels (easily extracted with organic solvent) were evaluated for their effect on the processing conditions and characteristics of chocolates in which they were used. Many aspects of chocolate manufacture and storage (tempering conditions, melt rheology, hardness, bloom stability) were dependent on the level of free milk fat in the milk powder. However, particle characteristics of the milk powder also influenced the physical and sensory properties of the final products. [ABSTRACT FROM AUTHOR]

Staphylococcus aureus is a spherical, gram-positive, pathogenic bacterium commonly associated with bovine mastitis and clinical infections. It is also recognized as a pathogen that causes outbreaks of food poisoning. The objective of this study was to develop and evaluate a rapid and reliable technique that combines propidium monoazide (PMA) staining with real-time quantitative (q)PCR to detect and quantify viable cells of Staph. aureus in milk powder and meat products. The inclusivity and exclusivity of the assay were evaluated using 58 strains belonging to 14 species. Serial dilutions of Staph. aureus cells were used to establish a standard curve and to confirm the effect of PMA treatment. Milk powder and meat products were used as the spiked foods, and the ability of PMA-qPCR to eliminate nonviable cells was determined in milk powder. Furthermore, meat products were inoculated with different concentrations of Staph. aureus and 10(5) cfu/g of Bacillus cereus and Salmonella enterica to test the interference by nontarget microorganisms. When PMA treatment was applied before DNA extraction, we were able to eliminate false-positive results with little effect on viable cells. The PMA-qPCR assay was specific and more sensitive than conventional PCR, and the level of detection was 3.0×10(2) cfu/g in spiked milk powder. Additionally, we observed no significant interference for the detection of viable Staph. aureus from other nontarget bacteria. The PMA-qPCR protocol is an effective and rapid method to quantify viable cells of Staph. aureus in food samples. The PMA-qPCR assay is specific and reliable, offering a valuable diagnostic tool for routine analysis in food and clinical diagnostic research at a reasonable cost., (Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

A method for simultaneous determination of the 30 organochlorine pesticides (OCP) in milk and milk powder samples has been developed. Prior to the gas chromatography-tandem mass spectrometric analysis, the residual OCP in samples were extracted with n-hexane and acetone mixture (1/1, vol/vol) and cleaned up by gel permeation chromatography and solid phase extraction. Selected reaction monitoring mode was used for gas chromatography-tandem mass spectrometric data acquisition to identify and quantify the OCP. To avoid the matrix effects, matrix-matched calibration solutions ranging from 2 to 50 ng/mL were used to record the calibration curve. Limits of quantification of all OCP were 0.8 μg/kg. With the exception of endrin, limits of quantification are significantly lower than maximum residue limits set by the European Union and China. The average recoveries were in the range of 70.1 to 114.7% at 3 spiked concentration levels (0.8, 2.0, and 10.0 μg/kg) with residual standard deviation lower than 12.9%. The developed method was successfully applied to analyze the OCP in commercial milk products., (Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

Understanding the formation of oxidized flavor will be highly useful in the improvement of milk powder quality. Effects of preheating, concentration and spray-drying on the particle characteristics and the oxidized flavor stability of milk powder were investigated. The surface composition and free radicals were analyzed using x-ray photoelectron spectroscopy and electron spin resonance spectrometry, respectively. The concentrations of selected oxidized volatiles hexanal and 2-heptanone were determined using solid-phase microextraction gas chromatography-mass spectrometry. Levels of hexanal and 2-heptanone in fresh milk powder were higher than those in raw milk and heated milk, which drastically increased with increasing time of storage. Differences in the morphological observations, free fat, and surface composition of fresh milk powder were found among different heat-related processes. During storage, a radical (g value, a characteristic constant whose value serves to identify any given free radical, was 2.0054) was detected in milk powder. The specific population of the radical increased from 2.99 × 10(7) at 3 mo to 1.23 × 10(8) at 6 mo of storage. Addition of ascorbic acid in milk powder changed the type of radicals and reduced the oxidation off-flavor. According to the Pearson correlations, not the surface compositions but the morphological characteristics of milk powder particles should be considered in maintaining the stability of oxidized flavor in storage., (Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

The objective of this study was to examine the possibility of applying visible and near-infrared spectroscopy to the quantitative detection of irradiation dose of irradiated milk powder. A total of 150 samples were used: 100 for the calibration set and 50 for the validation set. The samples were irradiated at 5 different dose levels in the dose range 0 to 6.0 kGy. Six different pretreatment methods were compared. The prediction results of full spectra given by linear and nonlinear calibration methods suggested that Savitzky-Golay smoothing and first derivative were suitable pretreatment methods in this study. Regression coefficient analysis was applied to select effective wavelengths (EW). Less than 10 EW were selected and they were useful for portable detection instrument or sensor development. Partial least squares, extreme learning machine, and least squares support vector machine were used. The best prediction performance was achieved by the EW-extreme learning machine model with first-derivative spectra, and correlation coefficients=0.97 and root mean square error of prediction=0.844. This study provided a new approach for the fast detection of irradiation dose of milk powder. The results could be helpful for quality detection and safety monitoring of milk powder., (Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)