Search

Certain cheeses can be legally produced in the United States using raw milk, but they must be aged for at least 60 d to reduce pathogen risks. However, some varieties, even when aged for 60 d, have been shown to support growth of Listeria monocytogenes or survival of Shiga toxin–producing Escherichia coli (STEC). Thermization, as a subpasteurization heat treatment, has been proposed as a control to reduce the risk of pathogens in raw cheese milk while retaining some quality attributes in the cheese. However, the temperature and time combinations needed to enhance safety have not been well characterized. The objective of this research was to determine and validate decimal reduction values (D-values) for L. monocytogenes and STEC at thermization temperatures 65.6, 62.8, and 60.0°C; a D-value at 57.2°C was also determined for L. monocytogenes only. Nonhomogenized, pasteurized whole-milk samples (1 mL) were inoculated with 8-log cfu/mL L. monocytogenes or STEC (5- or 7-strain mixtures, respectively), vacuum-sealed in moisture-impermeable pouches, and heated via water bath submersion. Duplicate samples were removed at appropriate intervals and immediately cooled in an ice bath. Surviving bacteria were enumerated on modified Oxford or sorbitol MacConkey overlaid with tryptic soy agar to aid in the recovery of heat-injured cells. Duplicate trials were conducted, and survival data were used to calculate thermal inactivation rates. D65.6°C-, D62.8°C-, and D60.0°C-values of 17.1 and 7.2, 33.8 and 16.9, and 146.6 and 60.0 s were found for L. monocytogenes and STEC, respectively, and a D57.2°C-value of 909.1 s was determined for L. monocytogenes. Triplicate validation trials were conducted for each test temperature using 100 mL of milk inoculated with 3 to 4 log cfu/mL of each pathogen cocktail, A 3-log reduction of each pathogen was achieved faster in larger volumes than what was predicted by D-values (D-values were fail-safe). Data were additionally compared with published results from 21 scientific studies investigating L. monocytogenes and STEC in whole milk heated to thermization temperatures (55.0–71.7°C). These data can be used to give producers of artisanal raw-milk cheese flexibility in designing thermal processes to reduce L. monocytogenes and STEC populations to levels that are not infectious to consumers.

Our objective was to determine the effects of temperature and protein concentration on viscosity increase and gelation of liquid micellar casein concentrate (MCC) at protein concentrations from 6 to 20% during refrigerated storage. Skim milk (~350 kg) was pasteurized (72°C for 16 s) and filtered through a ceramic microfiltration system to make MCC and replicated 3 times. The liquid MCC was immediately concentrated via a plate ultrafiltration system to 18% protein (wt/wt). The MCC was then diluted to various protein concentrations (6–18%, wt/wt). The highest protein concentrations of MCC formed gels almost immediately on cooling to 4°C, whereas lower concentrations of MCC were viscous liquids. Apparent viscosity (AV) determination using a rotational viscometer, gel strength using a compression test, and protein analysis of supernatants from ultracentrifugation by the Kjeldahl method were performed. The AV data were collected from MCC (6.54, 8.75, 10.66, and 13.21% protein) at 4, 20, and 37°C, and compression force test data were collected for MCC (15.6, 17.9, and 20.3% protein) over a period of 2-wk storage at 4°C. The maximum compressive load was compared at each time point to determine the changes in gel strength over time. Supernatants from MCC of 6.96 and 11.61% protein were collected after ultracentrifugation (100,605 × g for 2 h at 4, 20, and 37°C) and the nitrogen distributions (total, noncasein, casein, and nonprotein nitrogen) were determined. The protein and casein as a percent of true protein concentration in the liquid phase around casein micelles in MCC increased with increasing total MCC protein concentration and with decreasing temperature. Casein as a percent of true protein at 4°C in the liquid phase around casein micelles increased from about 16% for skim milk to about 78% for an MCC containing 11.6% protein. This increase was larger than expected, and this may promote increased viscosity. The AV of MCC solutions in the range of 6 to 13% casein increased with increasing casein concentration and decreasing temperature. We observed a temperature by protein concentration interaction, with AV increasing more rapidly with decreasing temperature at high protein concentration. The increase in AV with decreasing temperature may be due to the increase in protein concentration in the aqueous phase around the casein micelles. The MCC containing about 16 and 18% casein gelled upon cooling to form a gel that was likely a particle jamming gel. These gels increased in strength over 10 d of storage at 4°C, likely due either to the migration of casein (CN) out of the micelles and interaction of the nonmicellar CN to form a network that further strengthened the random loose jamming gel structure or to a gradual increase in voluminosity of the casein micelles during storage at 4°C.

Listeria monocytogenes is a ubiquitous pathogen that can cause morbidity and mortality in immunocompromised individuals. Growth of L. monocytogenes is possible at refrigeration temperatures due to its psychrotrophic nature. The use of antimicrobials in dairy products is a potential way to control L. monocytogenes growth in processes with no thermal kill step, thereby enhancing the safety of such products. Microbial-based enzymes offer a clean-label approach for control of L. monocytogenes outgrowth. Lactose oxidase (LO) is a microbial-derived enzyme with antimicrobial properties. It oxidizes lactose into lactobionic acid and reduces oxygen, generating H2O2. This study investigated the effects of LO in UHT skim milk using different L. monocytogenes contamination scenarios. These LO treatments were then applied to raw milk with various modifications; higher levels of LO as well as supplementation with thiocyanate were added to activate the lactoperoxidase system, a natural antimicrobial system present in milk. In UHT skim milk, concentrations of 0.0060, 0.012, and 0.12 g/L LO each reduced L. monocytogenes counts to below the limit of detection between 14 and 21 d of refrigerated storage, dependent on the concentration of LO. In the 48-h trials in UHT skim milk, LO treatments were effective in a concentration-dependent fashion. The highest concentration of LO in the 21-d trials, 0.12 g/L, did not show great inhibition over 48 h, so concentrations were increased for these experiments. In the lower inoculum, after 48 h, a 12 g/L LO treatment reached levels of 1.7 log cfu/mL, a reduction of 1.3 log cfu/mL from the initial inoculum, whereas the control grew out to approximately 4 log cfu/mL, an increase of 1 log cfu/mL from the inoculum on d 0. When a higher challenge inoculum of 5 log cfu/mL was used, the 0.12 g/L and 1.2 g/L treatments reduced the levels by 0.2 to 0.3 log cfu/mL below the initial inoculum and the 12 g/L treatment by >1 log cfu/mL below the initial inoculum by hour 48 of storage at refrigeration temperatures. After the efficacy of LO was determined in UHT skim milk, LO treatments were applied to raw milk. Concentrations of LO were increased, and the addition of thiocyanate was investigated to supplement the effect of the lactoperoxidase system against L. monocytogenes. When raw milk was inoculated with 2 log cfu/mL, 1.2 g/L LO alone and combined with sodium thiocyanate reduced ~0.8 log cfu/mL from the initial inoculum on d 7 of storage, whereas the control grew out to >1 log cfu/mL from the initial inoculum. Furthermore, in the higher inoculum, 1.2 g/L LO combined with sodium thiocyanate reduced L. monocytogenes counts from the initial inoculum by >1 log cfu/mL, whereas the control grew out 2 log cfu/mL from the initial inoculum. Results from this study suggest that LO is inhibitory against L. monocytogenes in UHT skim milk and in raw milk. Therefore, LO may be an effective treatment to prevent L. monocytogenes outgrowth, increase the safety of raw milk, and be used as an effective agent to prevent L. monocytogenes proliferation in fresh cheese and other dairy products. This enzymatic approach is a novel application to control the foodborne pathogen L. monocytogenes in dairy products.

Heat treatment is one of the most widely used processing technologies in the dairy industry. Its primary purpose is to destroy microorganisms, both pathogenic and spoilage, to ensure the product is safe and has a reasonable shelf life. In this study microwave volumetric heating (MVH) was compared with a conventional tubular heat exchanger (THE), in terms of the effects of each at a range of temperatures (75°C, 85°C, 95°C, 105°C, 115°C, and 125°C) on indigenous microflora viability and the germination of inoculated Bacillus licheniformis endospores in reconstituted skim milk. To assess the heat treatment-related effects on microbial viability, classical agar-based tests were applied to obtain the counts of 4 various microbiological groups including total bacterial, thermophilic bacterial, mesophilic aerobic bacterial endospore, and thermophilic aerobic bacterial endospore counts, and additional novel insights into cell permeability and spore germination profiles post-heat treatment were obtained using real-time flow cytometry (FC) methods. No significant differences in the plate counts of the indigenous microorganisms tested, the plate counts of the inoculated B. licheniformis, or the relative percentage of germinating endospores were observed between MVH- and THE-treated samples, at equal temperatures in the range specified above, indicating that both methods inactivated inoculated endospores to a similar degree (up to 70% as measured by FC and 5 log reduction as measured by plate counting for some treatments of inoculated endospores). Furthermore, increased cell permeability of indigenous microflora was observed by FC after MVH compared with THE treatment of uninoculated skim milk, which was reflected in lower total bacterial count at a treatment temperature of 105°C. This work demonstrates the utility of FC as a rapid method for assessing cell viability and spore inactivation for postthermal processing in dairy products and overall provides evidence that MVH is at least as effective at eliminating native microflora and inoculated B. licheniformis endospores as THE.

The objective of this study was to examine the effect of isonitrogenous substitution of solvent-extracted soybean meal (SBM) with solvent-extracted canola meal (CM) on enteric CH4 production, ruminal fermentation characteristics (including protozoa), digestion (in situ and apparent total-tract digestibility), N excretion, and milk production of dairy cows. For this purpose, 16 lactating Holstein cows, of which 12 were ruminally cannulated, were used in a replicated 4 × 4 Latin square (35-d periods; 14-d adaptation). The cows averaged (mean ± SD) 116 ± 23 d in milk, 692 ± 60 kg of body weight, and 47.5 ± 4.9 kg/d of milk production. The experimental treatments were control diet (no CM; 0%CM) and diets supplemented [dry matter (DM) basis] with 7.9% CM (8%CM), 15.8% CM (16%CM), or 23.7% CM (24%CM) on a DM basis. The forage:concentrate ratio was 52:48 (DM basis) and was similar among the experimental diets. Canola meal was included in the diet at the expense of SBM and soybean hulls, whereas the percentages of the other diet ingredients were the same. Intake of DM increased linearly, whereas apparent total-tract digestibility of DM, crude protein, neutral detergent fiber, and gross energy (GE) declined linearly as CM inclusion in the diet increased. Total volatile fatty acids concentration and butyrate molar proportion decreased linearly, whereas molar proportion of propionate increased linearly, and that of acetate was unaffected by CM inclusion in the diet. Ruminal ammonia concentration was not affected by inclusion of CM in the diet. Energy-corrected milk (ECM) yield increased linearly (up to 2.2 kg/d) with increasing CM percentage in the diet, whereas milk production efficiency averaged 1.63 kg of ECM/kg of DM intake and was unaffected by CM inclusion in the diet. Daily CH4 production decreased linearly with increasing CM percentage in the diet (489, 475, 463, and 461 g/d for 0%CM, 8%CM, 16%CM and 24%CM diets, respectively). As a consequence, CH4 emission intensity (g of CH4/kg of ECM) also declined linearly by up to 10% as the amount of CM increased in the diet. Methane production also decreased linearly when expressed relative to GE intake (5.7, 5.2, 5.1, and 4.9% for 0%CM, 8%CM, 16%CM and 24%CM diet, respectively). Quantity of manure N excretion was not affected by replacing SBM with CM; however, N excretion shifted from urine to feces as dietary percentage of CM increased, suggesting reduced potential for N volatilization. Results from this study show that replacing SBM with CM as a protein source in dairy cow diets reduced enteric CH4 emissions (g/d, % of GE intake, and adjusted for milk production) and increased milk production. The study indicates that CM can successfully, partially or fully, replace SBM in lactating dairy cow diets, with positive effects on animal productivity and the environment (i.e., less enteric CH4 emission and urinary N excreted). We conclude that compared with SBM, inclusion of CM meal in dairy cow diets can play a key role in reducing the environmental footprint of milk production.

Concentration of milk in the dairy industry is typically achieved by thermal evaporation or reverse osmosis (RO). Heat concentration is energy intensive and leads to cooked flavor and color changes in the final product, and RO is affected by fouling, which limits the final achievable concentration of the product. The main objective of this work was to evaluate forward osmosis (FO) as an alternative method for concentrating milk. The effects of fat content and temperature on the process were evaluated, and the physicochemical properties and sensory qualities of the final product were assessed. Commercially pasteurized skim and whole milk samples were concentrated at 4, 15, and 25°C using a benchtop FO unit. The FO process was assessed by monitoring water flux and product concentration. The color of the milk concentrates was also evaluated. A sensory panel compared the FO concentrated and thermally concentrated milks, diluted to single strength, with high temperature, short time pasteurized milk. The FO experimental runs were conducted in triplicate, and data were analyzed by single-factor ANOVA. Water flux during FO decreased with time under all processing conditions. Higher temperatures led to faster concentration and higher concentration factors for both skim and whole milk. After 5.75 h of FO processing, the concentration factors achieved for skim milk were 2.68 ± 0.08 at 25°C, 2.68 ± 0.09 at 15°C, and 2.36 ± 0.08 at 4°C. For whole milk, after 5.75 h of FO processing, concentration factors of 2.32 ± 0.12 at 25°C, 2.12 ± 0.36 at 15°C, and 1.91 ± 0.15 at 4°C were obtained. Overall, maximum concentration levels of 40.15% total solids for skim milk and 40.94% total solids for whole milk were achieved. Additionally, a triangle sensory test showed no significant differences between regular milk and FO concentrated milk diluted to single strength. This work shows that FO is a viable nonthermal processing method for concentrating milk, but some technical challenges need to be overcome to facilitate commercial utilization.

Milkability is a trait related to the milking efficiency of an animal, and it is a component of the herd profitability. Due to its economic importance, milkability is currently included in the selection index of the Italian Simmental cattle breed with a weight of 7.5%. This lowly heritable trait is measured on a subjective scale from 1 to 3 (1 = slow, 3 = fast), and genetic evaluations are performed by pedigree-based BLUP. Genomic information is now available for some animals in the Italian Simmental population, and its inclusion in the genetic evaluation system could increase accuracy of breeding values and genetic progress for milkability. The aim of this study was to test the feasibility and advantages of having a genomic evaluation for this trait in the Italian Simmental population. Phenotypes were available for 131,308 cows. A total of 9,526 animals had genotypes for 42,152 loci; among the genotyped animals, 2,455 were cows with phenotypes, and the other were their relatives. The youngest cows with both phenotypes and genotypes (n = 900) were identified as selection candidates. Variance components and heritability were estimated using pedigree information, whereas genetic and genomic evaluations were carried out using BLUP and single-step genomic BLUP (ssGBLUP), respectively. In addition, a weighted ssGBLUP was assessed using genomic regions from a genome-wide association study. Evaluation models were validated using theoretical and realized accuracies. The estimated heritability for milkability was 0.12 ± 0.01. The mean theoretical accuracies for selection candidates were 0.43 ± 0.08 (BLUP) and 0.53 ± 0.06 (ssGBLUP). The mean realized accuracies based on linear regression statistics were 0.29 (BLUP) and 0.40 (ssGBLUP). No genomic regions were significantly associated with milkability, thus no improvements in accuracy were observed when using weighted ssGBLUP. Results indicated that genomic information could improve the accuracy of breeding values and increase genetic progress for milkability in Italian Simmental.

This study aimed to analyze the effect of milk fermented with Lactobacillus curvatus SMFM2016-NK on periodontal diseases and gut health in a rat model. To improve the effect of Lb. curvatus SMFM2016-NK-fermented milk administration for relieving periodontitis, the periodontitis rat models were treated with the following for 4 wk: 10% skim milk (normal), periodontitis + 10% skim milk (negative control), periodontitis + Lactobacillus rhamnosus GG-fermented milk (positive control), and periodontitis + Lb. curvatus SMFM2016-NK-fermented milk (PD+LCFM). Transcriptional analysis of inflammatory cytokines [tumor necrosis factor α (TNF-α), IL-1β, IL-6, and IL-10] was performed via quantitative reverse-transcription PCR. The changes in the oral and gut microbiomes after administering Lb. curvatus SMFM2016-NK-fermented milk were analyzed with metagenomics sequencing using DNA extracted from the oral gingival tissues and feces from the cecum of the rat models. After treatment with Lb. curvatus SMFM2016-NK-fermented milk, the relative gene expression levels of TNFA and IL1B in the gingiva decreased in the PD+LCFM group compared with those in the negative control group. In the oral microbiome, the proportion of the phylum Proteobacteria in the PD+LCFM group was lower than that in the negative control after treatment with Lb. curvatus SMFM2016-NK-fermented milk. For the effect in the gut, the relative gene expression levels of inflammatory cytokines in the colon between the normal and negative control groups were not different; however, the expression levels of TNFA and IL1B in the PD+LCFM and positive control groups, respectively, were lower than those in the negative control group. The composition and diversity of the gut microbiome differed among normal, periodontitis, and Lb. curvatus SMFM2016-NK-fermented milk treatment groups. These results indicate that Lb. curvatus SMFM2016-NK-fermented milk could alleviate periodontal and gut inflammation and change oral and gut microbiota.

Camel milk (CM) is gaining scientific attention due to its potential health and therapeutic benefits. Fermented drinkable yogurts (labans) were prepared from CM and bovine milk (BM) using mixed Streptococcus thermophilus and Lactobacillus delbrueckii ssp. bulgaricus bacteria supplemented with 1 of 2 hydrocolloids: pectin (0.1–0.3%) or sodium alginate (0.1–0.5%). The different labans were compared by studying their acidity and rheology as well as their structural and sensory properties. The CM and BM labans had titratable acidity values that ranged from 0.85 to 1.27 and 0.61 to 0.93%, respectively. Pectin at 0.2% enhanced the rheological properties of BM labans, but had no effect in CM labans. Sodium alginate at 0.3% and 0.5% increased viscosity, elastic or storage modulus (G′), and viscous or loss modulus (G″) values for both types of laban. Scanning electron microscopy indicated that the CM laban contained lower levels of “spike-like structures” than BM laban, and that the addition of hydrocolloids improved this effect. Quantitative descriptive sensory analysis showed that CM labans fortified with either 0.2% pectin or 0.3% sodium alginate were comparable to commercial BM laban in viscous mouthfeel. Fortified CM labans were more acidic and had stronger flavors than unfortified samples. Overall, this study demonstrated that the addition of sodium alginate or pectin at intermediate levels permits production of palatable CM labans of a satisfactory viscous consistency.

In this study, we investigated the antifungal activity of lactose oxidase (LO) as a potential biopreservative in dairy products. Our study objectives were to screen antifungal activity of LO against common mold strains, to detect the minimum inhibitory level of LO against the same strains, and to understand how LO affects the pH and lactic acid bacteria (LAB) counts in set yogurt. Five mold strains (Penicillium chrysogenum, Penicillium citrinum, Penicillium commune, Penicillium decumbens, and Penicillium roqueforti) were used throughout study. These strains were previously isolated from dairy manufacturing plants. Throughout the study, yogurts were stored at 21 ± 2°C for 14 d. Antifungal activity of LO was screened using 2 enzyme levels (1.2 and 12 g/L LO) against selected strains on the surface of a miniature laboratory set-yogurt model. For all tested strains, no visible mold growth was detected on the surface of yogurts covered with LO compared with control yogurt without LO. The minimum inhibitory level of LO against each strain was further investigated using 4 enzyme levels (0.12, 0.48, 0.84, and 1.2 g/L LO) on the miniature laboratory set-yogurt model. We detected 0.84 g/L LO as the minimum level inhibiting visible hyphal growth across strains. The minimum inhibitory level of LO varied for each individual strain. To study the effect of LO on the pH of yogurt, miniature laboratory set-yogurt models were covered with different enzyme levels (0.12, 0.48, 0.84, 1.2, and 12 g/L LO). At d 14, a difference was detected comparing pH values of treatments to control with no LO. Commercial low-fat set yogurt was used to study the effect of LO on LAB survival when yogurt surface was covered with 0.84 g/L LO under the same experimental conditions. Control with no LO was included. At d 14, 3 levels of catalase were added (0, 0.01, and 0.1%) to each treatment. To enumerate LAB, homogenized samples were plated on de Man, Rogosa, and Sharpe agar and incubated. Yogurts with 0.84 g/L LO had lower LAB counts compared with control yogurts, and catalase level did not have a significant effect on LAB counts. Our results demonstrated potential antifungal efficacy of LO against common spoilage organisms in dairy products with residual lactose and relatively low pH. Manufacturers should establish efficacy of LO against mold strains of interest and determine the effects of LO on organoleptic properties and LAB survival in set yogurt.

The growth of psychrotolerant aerobic spore-forming bacteria during refrigerated storage often results in the spoilage of fluid milk, leading to off-flavors and curdling. Because of their low toxicity, biodegradability, selectivity, and antimicrobial activity over a range of conditions, glycolipids are a novel and promising intervention to control undesirable microbes. The objective of this study was to determine the efficacy of a commercial glycolipid product to inhibit spore germination, spore outgrowth, and the growth of vegetative cells of Paenibacillus odorifer, Bacillus weihenstephanensis, and Viridibacillus arenosi, which are the predominant spore-forming spoilage bacteria in milk. For spore germination and outgrowth assays, varying concentrations (25–400 mg/L) of the glycolipid product were added to commercial UHT whole and skim milk inoculated with ∼4 log10 spores/mL of each bacteria and incubated at 30°C for 5 d. Inhibition of spore germination in inoculated UHT whole milk was only observed for V. arenosi, and only when glycolipid was added at 400 mg/L. However, concentrations of 400 and 200 mg/L markedly inhibited the outgrowth of vegetative cells from spores of P. odorifer and B. weihenstephanensis, respectively. No inhibition of spore germination or outgrowth was observed in inoculated UHT skim milk for any strain at the concentrations tested (25 and 50 mg/L). The effect of glycolipid addition on vegetative cell growth in UHT whole and skim milk when inoculated with ∼4 log10 cfu/mL of each bacteria was also determined over 21 d of storage at 7°C. Glycolipid addition at 50 mg/L was bactericidal against P. odorifer and B. weihenstephanensis in inoculated UHT skim milk through 21 d of storage, whereas 100 mg/L was needed for similar control of V. arenosi. Concentrations of 100 and 200 mg/L inhibited the growth of vegetative cells of B. weihenstephanensis and P. odorifer, respectively, in inoculated UHT whole milk, whereas 200 mg/L was also bactericidal to B. weihenstephanensis. Additional studies are necessary to identify effective concentrations for the inhibition of Viridibacillus spp. growth in whole milk beyond 7 d. Findings from this study demonstrate that natural glycolipids have the potential to inhibit the growth of dairy-spoilage bacteria and extend the shelf life of milk.

Ice cream handling and serving conditions on the consumer side may result in temperature abuse before consumption. Under some extreme conditions, even the sporadic presence of injured bacterial cells might pose a health risk due to the possibility of recovery of those cells. We conducted this investigation to evaluate the potential of injured cells of Listeria innocua to recover under ice cream temperature abuse conditions and on exposure to simulated gastrointestinal (GI) fluids. Ice cream mix samples (42% total solids), spiked with 4 log10 cfu/g of Listeria innocua, were thermally treated at 69°C for 30 min. Potential heat-injured cells were recovered in buffered Listeria broth (BLEB), followed by isolation on Listeria-specific modified Oxford agar (MOX). The ice cream mix samples, containing potentially injured cells of Listeria innocua, were followed through overnight aging (7°C), freezing (−3.3°C), and overnight hardening (−40°C) steps to obtain the final ice cream samples. To simulate temperature abuse conditions, the samples were held for 12 h at 4.4°C, followed by 30 min at room temperature (22°C); this treatment was considered the first cycle of temperature abuse. To generate a worst-case scenario, the samples were exposed to 3 such consecutive temperature abuse cycles. At the end of each cycle, direct plating was done on MOX to recover viable cells, and BLEB enrichment verified the presence of potential injured cells. In addition, the ice cream samples, containing potential injured cells, were passed through simulated GI fluids. As a first step, samples were mixed (1:1) with simulated gastric fluids (pH 1.0 and 2.0 before mixing) and held at 37°C in a shaker incubator. Samples drawn at 15, 30, and 60 min were analyzed for viable and potential injured cells. To study the effect of sequential transit through simulated intestinal fluid, a mixture of ice cream and gastric fluid (1:1) from the gastric fluid experiment above was added to simulated intestinal fluid (pH 6.8) and held at 37°C. Samples were analyzed at 30 and 360 min for viable and potential injured cells. Three trials were conducted and the samples collected in duplicates. The temperature abuse or GI fluid exposure studies did not result in the recovery of potential injured cells of Listeria innocua in the ice cream samples under the conditions tested. Exposure to gastric fluids, however, did not eliminate the potential injured cells. Further studies are necessary to understand the exact risk implications of these findings.

Nisin is a bacteriocin that is globally employed as a biopreservative in food systems to control gram-positive, and some gram-negative, bacteria. Here we tested the bioactivity of nisin A-producing Lactococcus lactis NZ9700 and producers of bioengineered variants thereof against representatives of the gram-negative genus Thermus, which has been associated with the pink discoloration defect in cheese. Starting with a total of 73 nisin variant-producing Lactococcus lactis, bioactivity against Thermus was assessed via agar diffusion assays, and 22 variants were found to have bioactivity greater than or equal to that of the nisin A-producing control. To determine to what extent this enhanced bioactivity was attributable to an increase in specific activity, minimum inhibitory concentrations were determined using the corresponding purified form of these 22 nisin A derivatives. From these experiments, nisin M17Q and M21F were identified as peptides with enhanced antimicrobial activity against the majority of Thermus target strains tested. In addition, several other peptide variants were found to exhibit enhanced specific activity against a subset of strains.

Contamination of dairy powders with sporeforming bacteria is a concern for dairy processors who wish to penetrate markets with stringent spore count specifications (e.g., infant powders). Despite instituted specifications, no standard methodology is used for spore testing across the dairy industry. Instead, a variety of spore enumeration methods are in use, varying primarily by heat-shock treatments, plating method, recovery medium, and incubation temperature. Importantly, testing the same product using different methodologies leads to differences in spore count outcomes, which is a major issue for those required to meet specifications. As such, we set out to identify method(s) to recommend for standardized milk powder spore testing. To this end, 10 commercial milk powders were evaluated using methods varying by (1) heat treatment (e.g., 80°C/12 min), (2) plating method (e.g., spread plating), (3) medium type (e.g., plate count milk agar), and (4) incubation time and temperature combinations (e.g., 32°C for 48 h). The resulting data set included a total of 48 methods. With this data set, we used a stepwise process to identify optimal method(s) that would explain a high proportion of variance in spore count outcomes and would be practical to implement across the dairy industry. Ultimately, spore pasteurized mesophilic spore count (80°C/12 min, incubated at 32°C for 48 h), highly heat resistant thermophilic spore count (100°C/30 min, incubated at 55°C for 48 h), and specially thermoresistant spore enumeration (106°C/30 min, incubated at 55°C for 48 h) spread plating on plate count milk agar were identified as the optimal method set for reliable enumeration of spores in milk powders. Subsequently, we assessed different powder sampling strategies as a way to reduce variation in powder spore testing outcomes using our recommended method set. Results indicated that 33-g composite sampling may reduce variation in spore testing outcomes for highly heat resistant thermophilic spore count over 11-g and 33-g discrete sampling, whereas there was no significant difference across sampling strategies for specially thermoresistant spore enumeration or spore pasteurized mesophilic spore count. Finally, an interlaboratory study using our recommended method set and a modified method set (using tryptic soy agar with 1% starch) among both university and industry laboratories showed increased variation in spore count outcomes within milk powders, which not only was due to natural variation in powders but also was hypothesized to be due to technical errors, highlighting the need for specialized training for technicians who perform spore testing on milk powders. Overall, this study addresses challenges to milk powder spore testing and recommends a method set for standardized spore testing for implementation across the dairy industry.

This study investigated the effects of feeding dairy calves starter diets containing 19% or 22% crude protein (CP) content on a dry matter basis and either supplemented or not with soybean oil (SBO, 0 vs. 3%, dry matter basis) on growth performance, digestibility, urinary nitrogen, and purine derivatives (PD) excretion. A total of 48 female Holstein dairy calves (mean 39.8 kg of body weight) were randomly distributed to experimental diets in a 2 × 2 factorial arrangement of treatments. The 4 dietary treatments were (1) starter diet without SBO supplement and 19% CP (NSBO-19CP), (2) starter diet without SBO supplement and 22% CP (NSBO-22CP), (3) starter diet with 3% SBO and 19% CP (SBO-19CP), and (4) starter diet with 3% SBO and 22% CP (SBO-22CP). Milk feeding value was similarly based on a constant protocol across experimental treatments and calves had ad libitum access to water and starter diets throughout the study. All calves were weaned on d 63 of age and remained in the study until d 83 of age. Calves supplemented with SBO had lower starter feed intake and average daily gain (ADG) and lower feed efficiency (FE) but had a higher fecal score indicating a higher likelihood of diarrhea occurrence compared with unsupplemented calves. Wither heights, digestibilities of organic matter, CP, and neutral detergent fiber were decreased, and ruminal volatile fatty acids tended to be reduced, and the molar proportion of ruminal butyrate (preweaning) and acetate (postweaning) reduced by supplemental SBO. The urinary allantoin and total PD excretion were reduced; however, urinary nitrogen excretion was increased when calves were supplemented with SBO. The CP amount did not affect starter feed intake, FE, or diarrhea occurrence rate, whereas the 22CP diets increased neutral detergent fiber digestibility, improved ADG (tendency), and increased allantoin and urinary PD excretion compared with the 19CP diets. The starter feed intake, ADG, FE, diarrhea occurrence rate, nutrient digestibility, and ruminal fermentation were not affected by the interaction between starter SBO and CP level; however, hip height and total PD in calves that received the SBO-22CP diets were higher than those fed the SBO-19CP diets. In conclusion, based on our experimental conditions, supplemental SBO could not be recommended for dairy calves. Furthermore, our findings indicate that SBO has negative effects on performance more attributed to reducing starter intake, digestibility, and ruminal volatile fatty acid concentration rather than because of a limitation of starter metabolizable protein supply and intestinal amino acid availability. Therefore, our results indicate that feeding the higher starter CP content is not a viable strategy to compensate for the negative effects of SBO supplementation on the growth performance of dairy calves.

Deoiled soy lecithin is a feed additive enriched in phospholipids. Our study evaluated the effects of dietary deoiled soy lecithin supplementation on (1) milk production and composition, (2) plasma and milk fatty acid (FA) content and yield, and (3) apparent FA digestibility and absorption in lactating dairy cows fed fractionated palm fat. In a split-plot Latin square design, 16 Holstein cows (160 ± 7 days in milk; 3.6 ± 1.2 parity) were randomly allocated to a main plot receiving a corn silage and alfalfa haylage-based diet with palm fat containing either moderate (MPA) or high palmitic acid (HPA) content at 1.75% of ration dry matter (72 or 99% palmitic acid, respectively; n = 8/palm fat diet). On each palm fat diet, deoiled soy lecithin was top-dressed at 0, 0.12, 0.24, or 0.36% of ration dry matter in a replicated 4 × 4 Latin square design. Following a 14-d covariate period, lecithin supplementation spanned 14 d, with milk and blood collected during the final 3 d. Milk composition and pooled plasma markers were measured. The statistical model included the fixed effects of palm fat type, lecithin dose, period, and the interaction between palm fat type and lecithin dose. The random effect of cow nested within palm fat group was also included. Lecithin linearly decreased dry matter intake. In cows fed HPA, lecithin feeding reduced milk fat content and tended to decrease milk fat yield. Although no changes in milk yield were observed, a quadratic reduction in 3.5% fat-corrected milk was observed with increasing lecithin dose. Lecithin linearly increased energy-corrected milk efficiency in cows fed MPA. Lecithin supplementation also decreased milk urea nitrogen, relative to unsupplemented cows. The proportion of 16-carbon FA in milk fat decreased linearly with lecithin dose, whereas 18-carbon FA increased linearly. Lecithin reduced de novo FA (16-carbon) content and tended to increase preformed FA (16-carbon) content in a linear manner. Compared with MPA, HPA diets reduced apparent total and 16-carbon FA digestibility and absorption. Deoiled soy lecithin feeding did not modify FA digestibility or absorption. Our observations suggest that soy lecithin feeding modifies rumen digestion to reduce dry matter intake and change milk composition.

In this study dairy phospholipid (PL) gels were made using 3 different concentrations of PL (15%, 30%, and 45%) and soybean oil to determine the gel-forming ability and functional traits that dairy PL have. After 24 h of storage the visual stability, crystal morphology, solid fat content, melting behavior, viscosity, and oil binding capacity of the gels were evaluated. All samples showed visual stability, whereas polarized light microscopy showed that high concentrations of PL reduced PL mobility, preventing tubular micelles from forming at high concentrations of PL (45%). Solid fat content increased with an increase in PL concentration. The melting enthalpy increased as the concentration of PL increased. The viscosity was assessed at 0.01, 0.1, and 1.0 1/s shear rates. A significant difference was observed between the 45% PL samples and the other samples at low and intermediate shear, but at high shear levels, a significant difference was only seen between the 15% PL sample and the other samples. The oil binding capacity showed a significant difference between the 45% PL sample and the other 2 samples. This study shows that dairy PL can be added to a vegetable oil to produce semi-solid material with appropriate functional properties.

In recent years, acid whey production has increased due to a growing demand for Greek yogurt and acid-coagulated cheeses. Acid whey is a dairy by-product for which the industry has long struggled to find a sustainable application. Bulk amounts of acid whey associated with the dairy industry have led to increasing research on ways to valorize it. Industry players are finding ways to use acid whey on-site with ultrafiltration techniques and biodigesters, to reduce transportation costs and provide energy for the facility. Academia has sought to further investigate practical uses and benefits of this by-product. Although modern research has shown many other possible applications for acid whey, no comprehensive review yet exists about its composition, utilization, and health benefits. In this review, the industrial trends, the applications and uses, and the potential health benefits associated with the consumption of acid whey are discussed. The proximal composition of acid whey is discussed in depth. In addition, the potential applications of acid whey, such as its use as a starting material in the production of fermented beverages, as growth medium for cultivation of lactic acid bacteria in replacement of commercial media, and as a substrate for the isolation of lactose and minerals, are reviewed. Finally, the potential health benefits of the major protein constituents of acid whey, bioactive phospholipids, and organic acids such as lactic acid are described. Acid whey has promising applications related to potential health benefits, ranging from antibacterial effects to cognitive development for babies to human gut health.

Consumer perception of smoked cheese was evaluated through focus groups, surveys, and central location testing. Three focus groups (n = 29) were conducted with consumers of smoked cheese. Subsequently, 2 online surveys were conducted. The purpose of the first survey (n = 1,195) was to understand types of smoked cheeses consumed and if consumers associated specific wood smokes with smoked cheese. Next, an adaptive choice-based conjoint (n = 367) was designed to evaluate consumer perception of different attributes of smoked cheese. Maximum difference scaling and familiarity questions were also included in the adaptive choice-based conjoint survey. Following the surveys, a central location test (n = 135) was conducted with cheeses smoked with 3 different woods at a low and high intensity (6 cheeses total). Hierarchical Bayesian estimation, 1-way ANOVA, agglomerative hierarchical clustering, and 2-way ANOVA (smoke type × intensity level) were used to interpret the collected data. Results from the focus groups indicated that smoked cheese was perceived as an artisan, high-end product and that appearance and price were strong purchase factors. In general, consumers were not aware of how smoked flavor was imparted to cheese, but when informed of the processes, they preferred cold-smoked cheese to the addition of liquid smoke flavor. Results from both surveys confirmed focus group observations. Consumers perceived flavor differences among different wood smokes and smoked products. Method of smoking, smoke intensity, type of wood, and type of cheese were the most important attributes for purchase of smoked cheese. When tasting, consumers differentiated smoke aroma and flavor among cheeses and preferred cherry wood smoked cheeses over apple wood or hickory smoked cheeses. Understanding consumer perceptions of smoked cheese will give insight into the desired experience that consumers expect when purchasing smoked cheese.

This study aimed to investigate the heat stability of dispersions from reconstituted reduced-calcium milk protein concentrate (RCMPC) with 80% protein or more. The tested RCMPC powders were produced from skim milk subjected to CO2 treatment before and during the process of ultrafiltration. The CO2 injection was controlled to obtain 0 (control, no CO2 injection), 20, 30, and 40% reduction in calcium levels in the RCMPC powders. The RCMPC powders were reconstituted to 10% (wt/wt) protein in deionized water. These dispersions were tested for heat stability in a rocking oil bath at 140°C at unadjusted, 6.5, 6.7, 6.9, and 7.1 pH. Calcium ion activity (CIA) and ionic strength measurements were carried out using a Ca ion-selective electrode and conductivity meter. Unadjusted pH of the dispersions varied from 6.8 in control to 5.96 in 40% RCMPC dispersions. The CIA of unadjusted dispersions ranged from 1.31 mM in control to 2.83 mM in 40% RCMPC. Heat stability, expressed as heat coagulation time (HCT) of unadjusted dispersions decreased as the level of Ca removal in powders increased (from 13.81 min in control to 0.46 min in 40% RCMPC) and was negatively correlated with the CIA of the dispersions. For control RCMPC dispersions, the minimum and maximum heat stability were observed at dispersion pH of 6.5 and 6.9, respectively, followed by a decrease at pH 7.1 (CIA was the lowest). Dispersions from 40% RCMPC and pH 7.1 had the maximum HCT of 30.94 min among all RCMPC dispersions at all pH values. From this study, it can be concluded that improved heat stability in high protein formulation beverages subjected to UHT processing could be achieved through calcium reduction in milk protein concentrates using CO2 injection.

The objective of this study was to test the effects of essential fatty acids (EFA), particularly α-linolenic acid (ALA), and conjugated linoleic acid (CLA) supplementation on metabolic and endocrine traits related to energy metabolism, including the somatotropic axis, in mid-lactation dairy cows. Four cows (126 ± 4 d in milk) were used in a dose-escalation study design and were abomasally infused with coconut oil (CTRL; 38.3 g/d; providing saturated fatty acids), linseed and safflower oils (EFA; 39.1 and 1.6 g/d; n-6:n-3 FA ratio = 1:3), Lutalin (CLA; cis-9,trans-11 and trans-10,cis-12 CLA, 4.6 g/d of each), or EFA and CLA (EFA+CLA) for 6 wk. The initial dosage was doubled twice after 2 wk, resulting in 3 dosages (dosages 1, 2, and 3). Each cow received each fat treatment at different times. Cows were fed with a corn silage-based total mixed ration providing a low-fat content and a high n-6:n-3 fatty acid ratio. Plasma concentrations of metabolites and hormones (insulin-like growth factor-binding proteins only on wk 0 and 6) were analyzed at wk 0, 2, 4, and 6 of each treatment period. Liver biopsies were taken before starting the trial and at wk 6 of each treatment period to measure hepatic mRNA abundance of genes linked to glucose, cholesterol and lipid metabolism, and the somatotropic axis. The changes in the milk and blood fatty acid patterns and lactation performance of these cows have already been published in a companion paper. The plasma concentration of total cholesterol increased with dosage in all groups, except CLA, reaching the highest levels in EFA+CLA and CTRL compared with CLA. The high-density lipoprotein cholesterol plasma concentration increased in CTRL and was higher than that in EFA and CLA, whereas the concentration of low-density lipoprotein cholesterol increased in a dose-dependent manner in EFA and EFA+CLA, and was higher than that in CLA. Hepatic mRNA expression of 3-hydroxy-3-methyl-glutaryl-CoA synthase 1 was upregulated in all groups but was highest in EFA+CLA. Expression of sterol regulatory element-binding factor 1 tended to be lowest due to EFA treatment, whereas expression of long chain acyl-CoA-synthetase was lower in EFA than in CTRL. Hepatic mRNA expression of GHR1A tended to be higher in EFA+CLA than in CTRL. The plasma concentration of insulin-like growth factor I increased in CLA, and the plasma IGFBP-2 concentration was lower in EFA+CLA than in CTRL at wk 6. The plasma concentration of adiponectin decreased in EFA+CLA up to dosage 2. Plasma concentrations of albumin and urea were lower in CLA than in CTRL throughout the experimental period. Supplementation with EFA and CLA affected cholesterol and lipid metabolism and their regulation differently, indicating distinct stimulation after the combined EFA and CLA treatment. The decreased IGFBP-2 plasma concentration and upregulated hepatic mRNA abundance of GHR1A in EFA+CLA-supplemented cows indicated the beneficial effect of the combined EFA and CLA treatment on the somatotropic axis in mid-lactation dairy cows. Moreover, supplementation with CLA might affect protein metabolism in dairy cows.

Light-oxidized flavor (LOF) resulting from photooxidation of riboflavin following light exposure is one of the most common off-flavors in fluid milk. The sensory perception of LOF has been studied extensively in high temperature, short time pasteurized (HTST) milk, but few studies have evaluated ultrapasteurized (UP) milk. The objective of this study was to evaluate the role of heat treatment in the development of LOF in UP fluid skim milk. Skim milk was processed by HTST or by direct steam injection (DSI-UP) and subsequently exposed to 2,000-lx light-emitting diode light for various times. Sensory properties were monitored by descriptive analysis and threshold tests, and volatile compounds were evaluated by solid phase microextraction with gas chromatography-mass spectrometry. Dissolved oxygen and riboflavin were determined at each time point using an oxygen meter and ultra-performance liquid chromatography with a fluorescence detector, respectively. The entire experiment was performed in triplicate. Typical cardboard and mushroom flavors (LOF) were detected by trained panelists in HTST milk after 3.5 h of light exposure. In contrast, LOF was not detected by trained panelists in UP milk until 36 h of light exposure. Similarly, the best estimate threshold for LOF from untrained consumers (n = 101) was higher for DSI-UP milk (61.0 h) than for HTST milk (15.2 h). Milks with LOF were characterized by higher relative abundance of the lipid oxidation compounds hexanal and heptanal. Dissolved oxygen (DO) and riboflavin concentrations decreased with increased light exposure time, and the decrease was slower in UP milk compared with HTST milk. Initial DO concentration was investigated as a possible influence in LOF development because DSI-UP milks had lower initial DO concentrations than HTST milks. However, follow-up evaluations of deaerated HTST milks suggested that DO was not a significant factor in LOF development. These results demonstrate that UP milk is less sensitive to LOF than HTST milk, possibly due to sensory masking effects or antioxidant effects of volatile sulfur compounds. An enhanced understanding of light and storage effects on milks will assist with best practices when transporting and displaying fluid milk products for sale.

In this study, we aimed to investigate differences in the genetics of fertility traits (heritability of traits and correlations between traits in divergent environments) in dairy cows of different production levels defined on the basis of the herd-average daily milk energy output (herd-dMEO). Data were obtained from Holstein-Friesian (n = 37,359 for fertility traits, 381,334 for dMEO), Brown Swiss (n = 79,638 for fertility traits, 665,697 for dMEO), and Simmental cows (n = 63,048 for fertility traits, 448,445 for dMEO) reared in northeastern Italy. Fertility traits under study were interval from calving to first service, interval from first service to conception, days open, calving interval, calving rate, and nonreturn rate at d 56. We classified herds into low and high productivity based on the herd-average dMEO (inferred using mixed effects models). We estimated genetic parameters using Bayesian bivariate animal models, where expressions of a phenotype in the low and high dMEO herds were taken as being different-albeit correlated-traits. Fertility traits were more favorable in Simmental than in Holstein-Friesian cows, whereas for all traits, Holstein-Friesian had the highest estimates of intraherd heritability [ranging from 0.021 (0.006-0.038) to 0.126 (0.10-0.15)] and Simmental the lowest [ranging from 0.008 (0.001-0.017) to 0.101 (0.08-0.12)]. The genetic correlations between fertility traits and dMEO were moderate and unfavorable, ranging, in absolute values, from 0.527 (0.37-0.68) to 0.619 (0.50-0.73) in Holstein-Friesian; from 0.339 (0.20-0.47) to 0.556 (0.45-0.66) in Brown Swiss; and from 0.340 (0.10-0.60) to 0.475 (0.33-0.61) in Simmental cattle. The only exception was the nonreturn rate at d 56, which had weak genetic correlations with dMEO in all 3 breeds. The herd correlations between fertility and dMEO tended to be modest and favorable and the residual correlations modest and variable. The heritability of fertility traits tended to be greater in the low dMEO than in the high dMEO herds in the case of the Holstein-Friesians, but not in the case of the Brown Swiss or Simmentals. The additive genetic correlations between fertility traits in the low and high dMEO herds were always lower than 1 [0.329 (-0.17 to 0.85) to 0.934 (0.86 to 0.99)] for all traits considered in all breeds. The correlation was particularly low for the threshold characters and the interval from first service to conception in Holstein-Friesian, suggesting that the relative performances of genotypes vary significantly between herds of different dMEO levels. Although there was large variability in the estimates, results might support making separate genetic evaluations of fertility in the different herd production groups. Our results also indicate that Simmental, a dual-purpose breed, has higher fertility and lower environmental sensitivity than Holstein-Friesian, with Brown Swiss being intermediate.

The aim of this study was to evaluate the concentrations of Ca, P, S, Mg, K, and Na, and their distribution in major fractions of donkey milk (i.e., fat, casein, whey proteins, and aqueous phase). Individual milk samples were collected by mechanical milking from 16 clinically healthy lactating donkeys. Milk yield per milking was recorded and milk gross composition, casein content, and pH were determined. Whole milk samples were centrifuged to separate fat and to obtain skim milk. Skim milk samples were ultracentrifuged to separate a sedimentable casein pellet and to obtain a supernatant whey (soluble) fraction, which was then ultrafiltered to obtain the aqueous phase of donkey milk. Whole milk and the processed samples were analyzed for the aforementioned elements by inductively coupled plasma-mass spectrometry. The concentration of elements associated with fat, casein, and whey proteins was then calculated. All the Na was present in the aqueous phase. The fat fraction in donkey milk carried very little or none of the investigated elements. The majority of Ca (62.9%) and P (53.1%) was associated with casein, and the rest of these elements was mostly present in the aqueous phase. The majority of Mg was present in the aqueous phase, but a relevant part (32.6%) was associated with the casein fraction. No K was associated with casein. On a molar basis, the ratio of colloidal Ca and P to casein (mmol/g of casein) was more than double the values reported in literature for cow milk. The correlation coefficient was negative between milk pH and P in the ultracentrifuged (r = -0.81) and ultrafiltered (aqueous) fraction (r = -0.66). Milk pH correlated positively with colloidal Ca (r = 0.59) and with the ratio of colloidal Ca to casein (mmol/g of casein; r = 0.68). Colloidal Ca and P were positively correlated (r = 0.64). These data suggest that the high ratio of colloidal Ca and P to donkey casein micelles is due to a larger amount of colloidal calcium phosphate bound to casein micelles compared with literature data on cow milk. The percentage of elements associated with whey proteins was less than 5% for Ca, P, and K, but Mg reached approximately 9% of total Mg. The majority of S (63.6%) was associated with whey proteins, and only one-fourth of this element was associated with casein, indicating a higher content of sulfur-containing amino acids in donkey whey proteins than in casein.

Both insulin and trans-10,cis-12 C18:2 (t10c12CLA) can be increased by high-starch diets; thus, it is difficult to determine whether insulin or t10c12CLA mediates nutrient partitioning toward body tissues during milk fat depression. To minimize insulin secretion while manipulating t10c12CLA levels, diets supplemented with palmitic acid-enriched triglycerides and soybean oil were fed to cows. Thirty-two Holstein cows (93 ± 35 d in milk) were included in the crossover experiment with each treatment period being 28 d. Treatment diets contained 25% neutral detergent fiber, 32% starch, 18% crude protein, and 4.6% fatty acids (dry matter basis). Treatment diets contained either palmitic acid-enriched triglycerides (2.5% dry matter, BergaFat T-300, Berg + Schmidt America LLC, Libertyville, IL; PAT) or soybean oil (2.5% dry matter; SBO). Cows were blocked by milk yield, body weight, and parity, and then randomly assigned to 1 of 2 treatment sequences (PAT-SBO or SBO-PAT). Cows fed PAT produced milk with only 3.1% fat, indicating milk fat depression; SBO decreased fat content further to only 2.4%. No effect of treatment was observed on dry matter intake, apparent net energy intake, milk yield, body condition score, or fat thickness over the rump and rib. However, compared with PAT, SBO decreased fat-corrected milk yield, energy-corrected milk yield, milk fat yield, de novo fatty acids, and 16-carbon fatty acid yield, whereas SBO increased body weight gain. Neutral detergent fiber digestibility tended to be lower in SBO, whereas fatty acid digestibility was higher. Additionally, the concentration of plasma insulin, nonesterified fatty acids, and triglycerides, and milk metabolites (trans-10 C18:1 and t10c12CLA) were all higher in SBO. In conclusion, with similar dietary starch content, the diet containing palmitic acid-enriched triglycerides partitioned more energy toward milk synthesis, whereas the diet containing soybean oil partitioned more energy toward body tissue gain.

The objective of this experiment was to identify and characterize the bovine milk proteome within the skim milk fraction and milk fat globule membrane (MFGM)-associated fraction from 16 organically certified lactating Jersey cows after a short term of grazing pastures with or without annual forage crops (AFC). Cows were offered a partial mixed ration (~60% of dry matter intake) and approximately 40% of their total dry matter intake as herbage. Eight cows were offered a cool-season grass–legume herbage (GLH), which included orchardgrass (Dactylis glomerata), timothy (Phleum pratense), Kentucky bluegrass (Poa pratensis), and white clover (Trifolium repens). The other 8 cows were offered the same GLH strip-tilled with the AFC, including oat (Avena sativa), millet (Pennisetum glaucum), teff (Eragrostis tef), buckwheat (Fagopyrum esculentum), and chickling vetch (Lathyrus sativus). Milk samples were collected from each cow during a.m. and p.m. milkings on d 19 to 21 of grazing, and composite milk samples per cow were analyzed for (1) the high-abundance milk protein profile, (2) the skim milk low-abundance protein-enriched proteome, and (3) the MFGM proteome. Of the 443 proteins identified in the skim and MFGM proteomes, 433 were included in statistical analysis, including 68 proteins identified in the skim milk fraction and 365 in the MFGM-associated fraction. Analysis of the skim and MFGM proteomes encompassed unique gene ontology profiles and proportions of functional classifications. In response to diet, αS1-casein as well as 8 low-abundance proteins were present in higher concentration or abundance in milk from cows grazing the GLH strip-tilled with the AFC compared with milk from cows grazing GLH, suggesting that even short-term grazing of pastures including some AFC may affect the milk proteome.

We investigated the effect of seasonal variations on the acid gelation properties of bovine milk in a seasonal-calving New Zealand herd for 2 full milking seasons. We tested the formation of acid gels in 2 milk systems: unstandardized skim milk and standardized whole milk (4.6% protein, 4.0% fat). For unstandardized skim milk, late-season milk acid gels had a longer gelation time and a lower gelation pH than early- and mid-season milk acid gels, but we found no consistent seasonal variation in the final storage modulus. For standardized milk, late-season milk had the most inferior acid gelation properties during the year, including the lowest final storage modulus, the lowest gelation pH, and the longest gelation time. Standardization alleviated but did not eliminate the prolonged gelation time of late-season milk. These results indicated that the physicochemical properties of seasonal milk contributed greatly to its acid gelation, independent of differences in protein content. Standardization was not adequate to stabilize the acid gelation properties of late-season milk. Desirable acid gelation properties correlated with lower glycosylated κ-casein content, lower β-lactoglobulin:α-lactalbumin ratio, lower extent of whey protein-casein micelle association, and lower total calcium and ionic calcium content. We discuss the possible effects of the correlating variables on the acid gelation properties of seasonal milk. Natural variations in the glycosylation degree of κ-casein might play an important role in acid gel structural development by altering the electrostatic and hydrophobic interactions among the milk proteins.

Postpasteurization contamination (PPC) of fluid milk remains a challenge for some dairy processors. Pseudomonas is the most common contaminant of fluid milk after pasteurization, and therefore methods to detect PPC should be inclusive of Pseudomonas and other gram-negative contaminants (e.g., coliform bacteria). Our objective was to compare the ability of 3M (St. Paul, MN) coliform and Enterobacteriaceae (EB) Petrifilm to detect total gram-negative bacteria with that of the standard method, crystal violet tetrazolium agar. To that end, we evaluated coliform Petrifilm, EB Petrifilm, and crystal violet tetrazolium agar to detect gram-negative bacteria in naturally contaminated samples of fluid milk. A total of 92 observations derived from shelf-life testing of 33 milk samples from 5 different processing facilities were evaluated for (1) presence of coliforms on coliform Petrifilm at both 24 and 48 h of incubation; (2) presence of any growth, regardless of gas production, on coliform Petrifilm at both 24 and 48 h of incubation; (3) presence of EB on EB Petrifilm at both 24 and 48 h of incubation; (4) presence of any growth, regardless of gas or acid production, on EB Petrifilm at both 24 and 48 h of incubation; and (5) presence of gram-negative bacteria on crystal violet tetrazolium agar after 48 h of incubation. Sensitivity and specificity analysis of results indicated that compared with the standard method (i.e., crystal violet tetrazolium agar), the method that performed the best, based on balanced accuracy (i.e., the average of sensitivity and specificity), was coliform Petrifilm evaluated for the presence of any growth after 48 h of incubation (sensitivity = 0.787; specificity = 0.839). This method can be easily adopted by the dairy industry as many processing facilities already test for coliforms using coliform Petrifilm. Improving the ability of processors to detect PPC will improve the quality of the fluid milk supply.

Stabilizers are routinely added during cream cheese manufacture to help prevent syneresis during storage. We investigated how different types of stabilizers affected the texture, rheology, and sensory properties of cream cheese. Cream cheeses were manufactured with 0.33% xanthan gum (XG), locust bean gum (LBG), guar gum (GG), or a combination (CBN) of these 3 stabilizers (0.11% of each). Rheological properties of solutions of the individual stabilizers and their combination (equal amounts) were also determined under conditions similar to the aqueous phase of cream cheese (0.6% gum, 1.8% NaCl, and pH 5). Dynamic small amplitude rheological properties of the cream cheeses were measured during heating from 5 to 80°C at the rate of 1°C/min and cooling at the same rate (because most cream cheese is hot packed/filled before cooling). Measured rheological parameters included storage modulus (G') and loss tangent. Hardness of cream cheeses was determined by texture profile analysis. Quantitative spectrum descriptive sensory analysis was also performed. Distinct differences were observed between the rheological properties of solutions of the individual stabilizers and the CBN containing all the stabilizers. Results showed that CBN solution formed a strong, thermally reversible gel due to synergistic interaction between stabilizers, whereas XG solution formed a weak gel that was not greatly affected by temperature. Solutions of LBG and GG behaved rheologically as entangled polymer solutions. In the high-temperature (>35°C) region, cream cheeses made with XG and CBN showed higher G' values compared with other cream cheeses. The G' values were higher for XG- and CBN-stabilized cream cheeses than LBG- and GG-stabilized cream cheeses at several temperature regions during the cooling cycle. The CBN-stabilized cream cheeses had higher hardness values than the cream cheeses manufactured with the individual stabilizers. Differences were observed between the sensory attributes of cream cheeses stabilized with CBN and those made with individual stabilizers. At low temperatures, the higher hardness and G' values of CBN-stabilized cream cheeses could be due to synergistic interaction between XG and galactomannans. The higher elasticity of XG-stabilized cream cheeses at high temperatures could be due to its higher thermal stability. This study showed that the stabilizers added during manufacture of cream cheese affected its texture, rheological, and sensory properties.

Previous research has demonstrated that feeding canola meal (CM) improves milk production and N utilization by lactating dairy cows when replacing solvent-extracted soybean meal (SBM). The objective of the present study was to evaluate whether CM would improve milk yield and components and N utilization, compared with SBM, at different ratios of alfalfa silage (AS) to corn silage (CS) fed to lactating dairy cows. Twenty-four multiparous Holstein cows averaging, at the beginning of the study (mean ± SD), 2.8 ± 0.9 parity, 684 ± 56 kg of BW, 102 ± 41 DIM, and 49 ± 4 kg milk/d, and 24 primiparous cows averaging (mean ± SD) 565 ± 46 kg of BW, 123 ± 30 DIM, and 40 ± 4 kg milk/d were blocked by parity and DIM. A cyclic changeover design with 4 replications of 2 blocks of treatments of 6 cows was used in an arrangement with 4 28-d periods. Dietary treatments were arranged in a 3 × 2 factorial design of 3 proportions of AS to CS as forage source (HAS = high AS, 50% AS to 10% CS; MAS = medium AS, 30% AS to 30% CS; LAS = low AS, 10% AS to 50% CS) and 2 protein supplements (CM vs. SBM). Diets were formulated to contain [dry matter (DM) basis]: 60% forage, 8 to 15% high-moisture corn, 2 to 5% soy hulls, 1.3% mineral-vitamin premix, 16% crude protein, and 31 to 33% NDF. Data from the last 2 weeks of each period were used to compute mean milk yield and composition, and efficiencies of feed conversion, for each cow in each period. Data for the other variables were collected during the last week of each period. All data were analyzed using the MIXED procedure of SAS (SAS Institute Inc., Cary, NC). Regardless of the forage source, replacing SBM with CM improved yields of milk, milk protein, and solids-not-fat. Moreover, milk urea nitrogen concentration and urinary excretion of total N (g/d) and urea N (% of total urinary N) decreased when CM replaced SBM. An interaction effect occurred between forage source and protein supplements for apparent total-tract digestibility, and, overall, this effect was due to small differences in ingredient and chemical compositions of the diets. In addition, these differences had a minor effect on cow performance. Yields of milk and milk components were greatest for cows fed 50% CS, intermediate for 30% CS, and lowest for 10% CS, indicating that, under the conditions of the present study, cows fed 50% CS in the diet (DM basis) had greater production compared with those fed 50% AS.

A systematic review and meta-analysis were conducted to estimate the effect of herb species on milk production and urinary nitrogen (UN) excretion from grazing dairy cows. Grazing swards consisting of herb species grown with either a grass species or a grass and legume (multispecies swards) were compared with non-herb-containing swards consisting of a grass species grown as a monoculture or grass-legume swards (simple swards). A literature search was completed using the online databases CAB Direct, Web of Science, and Google Scholar, using the search strategy "dairy cow", "herb OR forb OR phorb", and "grazing". Milk production data, variance, and sample size were required for eligibility. In all, 116 studies were identified. Following eligibility screening, 11 papers from 6 journals, published between 2006 and 2018, were available for analysis. Studies were from New Zealand (N = 7), Australia (N = 3), and the United States (N = 1). The population was either Holstein Friesian or Holstein Friesian × Jersey dairy cows, with a range in mean daily milk yield (MY) from 12.1 kg to 34.7 kg (mean = 18.6 kg). A total of 25 comparisons were used for milk production analysis, with 324 and 284 cows included in multispecies and simple sward groups respectively. Data analysis was conducted in R using a random effects, robust variance estimation model (R Foundation for Statistical Computing, Vienna, Austria). Heterogeneity was reported using the I2 statistic. Milk production was significantly increased. Analysis of MY resulted in a weighted mean difference (WMD) of +1.20 kg/d (95% CI = 0.90, 1.49; I2 = 4%). Fat and protein kg were also significantly increased (WMD +0.06 kg/d; CI = 0.01, 0.11). Urinary nitrogen excretion was estimated from milk urea nitrogen when reported (n = 6). A WMD of -28.1 g of N/d (95% CI = -81.1, 24.9) was generated, with heterogeneity high among studies (I2 = 75%). This meta-analysis shows the potential benefits of multispecies swards. Although we saw no significant difference in UN excretion, an increase in milk production was found.

Control of acidity is critical for cheese quality, as high acidity can be associated with poor flavor and textural attributes. We investigated an alternative method to control cheese acidity, specifically in low-fat (LF) and reduced-fat (RF) milled curd, direct-salted Gouda cheese, which involved altering the initial lactose content of cheesemilk. In traditional Gouda cheese manufacture, a critical technique to control acidity is whey dilution (WD); that is, partial removal of whey and its replacement with water. Direct standardization of the lactose content of milk during the ultrafiltration process could be a simpler and more effective technique to control cheese acidity. This study compared the effect of traditional WD at 2 different levels, 15 and 30% (WD15 and WD30), with the alternative approach of adjustment of the lactose content of milk using low-concentration-factor ultrafiltration (LCF-UF). The composition, texture, functionality, and sensory properties of these LF and RF Gouda cheeses were evaluated. A milled curd, direct-salted cheese manufacturing protocol was used. Milks used for cheesemaking had a lactose-to-casein (L:CN) ratio of approximately 1.8, which is the typical ratio found in milk, whereas milks prepared with lactose standardization (LS) were made from UF concentrated milks with water added during filtration to achieve a L:CN ratio of approximately 1.1. Cheeses made with LS exhibited lower lactose and lactic acid contents than WD30 and WD15, leading to significantly higher pH values in the cheese. Dynamic small-amplitude oscillatory rheology indicated that use of LS led to cheeses with a lower crossover temperature (melting point) than the cheeses made with WD. Cheeses made with LS had lower insoluble Ca contents, likely caused by the addition of water required to achieve the lower L:CN ratio in these milks. Sensory analysis also indicated that LS cheeses had lower acidity and softer texture. These results suggest that standardization of the L:CN ratio of milk could be a useful alternative to WD (or a curd rinse step) to reduce acidity in cheeses. In addition, LS could be used to help soften texture and increase meltability, if desired in lower-fat cheese types.

This study was conducted to examine the effects of clay (CL) and Saccharomyces cerevisiae fermentation product (SCFP) on the ruminal bacterial community of Holstein dairy cows challenged with aflatoxin B1 (AFB1). A second objective was to examine correlations between bacterial abundance and performance measures. Eight lactating dairy cows stratified by milk yield and parity were randomly assigned to 4 treatments in a 4 × 4 Latin square design with 2 replicate squares, four 33-d periods, and a 5-d washout between periods. The treatments included (1) control (basal diet, no additive); (2) T (control + 63.4 µg/kg AFB1, oral dose); (3) CL (T + 200 g/head per day of sodium bentonite clay, top-dress); and (4) CL+SCFP [CL + 19 g/head per day Diamond V NutriTek (Diamond V Inc., Cedar Rapids, IA) + 16 g/head per day MetaShield (Diamond V Inc.), top-dress]. Cows were adapted to diets containing no AFB1 from d 1 to 25 (predosing period). From d 26 to 30 (dosing period), AFB1 was orally dosed and then withdrawn for d 31 to 33 (withdrawal period). During the predosing period, compared with the control, feeding CL and CL+SCFP increased the relative abundance of the most dominant phylum, Bacteroidetes (55.1 and 55.8 vs. 50.6%, respectively), and feeding CL+SCFP increased Prevotella abundance (43.3 and 43.6 vs. 40.0%, respectively). During the dosing period, feeding AFB1 did not affect the ruminal bacterial community, but the relative abundance of Fibrobacteraceae increased with CL+SCFP compared with T (1.45 vs. 0.97%); Fibrobacter abundance also tended to increase with CL+SCFP compared with T and control, respectively (1.45 vs. 0.97 and 1.05%, respectively). Feeding AFB1 with or without CL or CL+SCFP did not affect ruminal pH or concentrations of NH3-N, total volatile fatty acids, or individual volatile fatty acids. Milk yield and milk component yields were positively correlated with the relative abundance of unclassified Succinivibrionaceae, unclassified YS2, or Coprococcus. Feed efficiency was positively correlated (r ≥ 0.30) with the relative abundance of unclassified YS2, Coprococcus, or Treponema. Feeding aflatoxin at 63 µg/kg, a common contamination level on farms, did not affect the abundance of dominant bacteria or rumen fermentation. When aflatoxin was fed, CL+SCFP increased the abundance of Fibrobacter, a major fibrolytic bacteria genus. Milk yield and DMI were positively correlated with abundance of Succinivibrionaceae and Coprococcus. Feed efficiency was positively correlated with abundance of Coprococcus, Treponema, and YS2. Future studies should speciate culture and determine the functions of the bacteria to elucidate their roles in the rumen and potential contribution to increasing the performance of dairy cows.

This study was conducted to analyze the effect of milk types on the attributes of the glutinous rice wine-fermented yogurt-like product named Kouwan Lao (KWL). Four types of raw milks were used in this study, including high temperature, long time (HTLT: H milk), HTLT milk supplemented with 3% skim milk powder (S milk), pasteurized milk (P milk), and ultra-high temperature milk (U milk). Microbiological compositions of the fermented glutinous rice and KWL at different stages were analyzed using PCR-denaturing gradient gel electrophoresis and gene sequencing based on 16S rRNA and 26S rRNA. The physicochemical properties of KWL samples were determined, and textural properties of those were analyzed using a texture analyzer (Jiawei Innovation and Technology Co. Ltd., Zhejiang Province, China). The microstructure of KWL samples was observed using scanning electron microscopy. The results showed that the milk types had significant influences on the bacterial composition of KWL. In the curdling process, the predominant bacteria of H, S, P, and U KWL samples were Lactobacillus brevis, Janthinobacterium sp., Lactobacillus casei, and Streptococcus agalactiae, respectively. In the ripening process, the main strains in H KWL were Enterococcus faecium and Pediococcus pentosaceus. Lactobacillus casei and Lactobacillus paracasei were the dominant bacteria of U KWL. Lactobacillus casei was the main strain of P KWL, and no bacteria were detected in S KWL. Saccharomyces cerevisiae was the dominant fungus of KWL, and no significant effect of milk types on fungal composition of KWL was found. The results of physicochemical properties showed that significant differences in protein contents were found in the KWL samples, and P KWL had the highest protein content. The fat content of U KWL was significantly higher than that of samples from the other 3 groups. The U KWL and P KWL showed lower moisture than that of the other 2 KWL samples. In addition, no significant difference in pH value was found in all samples. The results of texture analysis and microstructure showed that compared with other 3 types of KWL samples, the related mass parameters of U KWL were more advantageous and improved significantly with the increase of the heat treatment temperature of raw milk and the addition of skim milk powder. Our findings revealed the effects of milk types on microbial composition, physicochemical properties, textural properties, and microstructure of KWL, and provided a basic theory for the optimization and industrial production of KWL.

Spore formers are common spoilage-causing microorganisms in dairy products; however, their modes of spoilage (proteolysis, lipolysis, etc.) have not been described in detail for cultured dairy products such as sour cream and yogurt. The objective of the present study was to test the ability of spore-forming strains isolated from dairy environments for their spoilage-causing activities at typical sour cream (24°C) and yogurt (42°C) fermentation temperatures. A total of 25 spore-forming strains were isolated from different sources, including raw milk, pasteurizer balance tank, biofilms formed on heat exchangers, and milk powder. These strains were tested for proteolytic and lipolytic activities and for their ability to degrade phospholipids, common stabilizers (starch, gelatin, xanthan gum, pectin), and exopolysaccharides (EPS) at sour cream and yogurt fermentation temperatures. A higher percentage of positive strains was observed for selected activities at yogurt fermentation temperature compared with sour cream fermentation temperature. Identified proteolytic spore-forming strains, based on a skim milk agar method, were subsequently quantified for their level of proteolysis using non-casein nitrogen (NCN) content and sodium dodecyl sulfate-PAGE (SDS-PAGE). The proteolytic strains that showed the highest levels of proteolysis (highest percentages of NCN content) at 24°C were Bacillus mojavensis BC, Bacillus cereus DBC, Bacillus subtilis DBC, B. mojavensis DBC1, and Paenibacillus polymyxa DBC1. At 42°C the strains with the highest levels of proteolysis (highest percentages of NCN content) were B. subtilis DBC, B. mojavensis BC, B. mojavensis DBC1, B. cereus DBC, and Bacillus licheniformis DBC6. Results of SDS-PAGE demonstrated that proteolytic strains had primarily hydrolyzed β- and κ-CN. A viscometric method was used to evaluate the susceptibility of exopolysaccharides (EPS) to degradation by selected spore formers. This method helped to determine that EPS produced by commercial yogurt and sour cream cultures is susceptible to degradation by spore formers present in dairy environments.

Volatile sulfur compounds in ultra-pasteurized (UP) milk are the major contributors to sulfur/burnt and eggy flavors, and these flavors are disliked by consumers. Previous research has established distinct differences in flavor profiles of fluid milk processed by high temperature, short time pasteurization (HTST) and UP by direct steam injection (DSI-UP) or indirect heat (IND-UP). An understanding of the contribution of the individual milk proteins to sulfur off-flavors would clarify the source of sulfur flavors in UP milks. The objective of this study was to determine the source of volatile sulfur compounds in fluid milk with a specific focus on the comparison of heat treatment effects on milks by HTST and UP. Formulated skim milks (FSM) were manufactured by blending micellar casein concentrate and serum protein isolate (SPI). Three different caseins as a percentage of true protein (FSM95, FSM80, and FSM60) were formulated to determine the source of sulfur/burnt and eggy flavors. Freshly processed micellar casein concentrate or SPI were blended to achieve a true protein content of about 3.2%. Raw skim milk served as a control. Skim milk and FSM were pasteurized at 78°C for 15 s (HTST) or 140°C for 2.3 s by IND-UP or DSI-UP. The experiment was replicated twice. Sensory properties of milks and FSM were documented by descriptive sensory analysis. Volatile sulfur compounds in milks and FSM were evaluated using solid-phase microextraction followed by gas chromatography-triple quadrupole mass spectrometry combined with a sulfur selective flame photometric detector. The FSM with higher SPI as a percent of true protein had higher sensory sulfur/burnt and eggy flavors along with elevated concentrations of hydrogen sulfide and carbon disulfide compared with skim milk or FSM with lower proportions of SPI. Sulfur compounds including dimethyl sulfide, dimethyl disulfide, dimethyl trisulfide, dimethyl sulfoxide, and methional were not associated with sulfur/burnt and eggy flavors, which suggests that these compounds may not specifically contribute to the sulfur/burnt and eggy off-flavors of UP milks. Sensory panelists found higher overall aroma impact, and cooked, sulfur/burnt, and eggy flavors for DSI-UP, followed by IND-UP and HTST. The combination of sensory and instrumental methods used in the current study effectively identified that milk serum proteins are the source of sulfur compounds in milk, and further confirmed the contribution of hydrogen sulfide and carbon disulfide to eggy and sulfur/burnt flavors, respectively.

Acid whey resulting from the production of soft cheeses is a disposal problem for the dairy industry. Few uses have been found for acid whey because of its high ash content, low pH, and high organic acid content. The objective of this study was to explore the potential of recovery of whey protein from cottage cheese acid whey for use in yogurt. Cottage cheese acid whey and Cheddar cheese whey were produced from standard cottage cheese and Cheddar cheese-making procedures, respectively. The whey was separated and pasteurized by high temperature, short time pasteurization and stored at 4°C. Food-grade ammonium hydroxide was used to neutralize the acid whey to a pH of 6.4. The whey was heated to 50°C and concentrated using ultrafiltration and diafiltration with 11 polyethersulfone cartridge membrane filters (10,000-kDa cutoff) to 25% total solids and 80% protein. Skim milk was concentrated to 6% total protein. Nonfat, unflavored set-style yogurts (6.0 ± 0.1% protein, 15 ± 1.0% solids) were made from skim milk with added acid whey protein concentrate, skim milk with added sweet whey protein concentrate, or skim milk concentrate. Yogurt mixes were standardized to lactose and fat of 6.50% and 0.10%, respectively. Yogurt was fermented at 43°C to pH 4.6 and stored at 4°C. The experiment was replicated in triplicate. Titratable acidity, pH, whey separation, color, and gel strength were measured weekly in yogurts through 8 wk. Trained panel profiling was conducted on 0, 14, 28, and 56 d. Fat-free yogurts produced with added neutralized fresh liquid acid whey protein concentrate had flavor attributes similar those with added fresh liquid sweet whey protein but had lower gel strength attributes, which translated to differences in trained panel texture attributes and lower consumer liking scores for fat-free yogurt made with added acid whey protein ingredient. Difference in pH was the main contributor to texture differences, as higher pH in acid whey protein yogurts changed gel structure formation and water-holding capacity of the yogurt gel. In a second part of the study, the yogurt mix was reformulated to address texture differences. The reformulated yogurt mix at 2% milkfat and using a lower level of sweet and acid whey ingredient performed at parity with control yogurts in consumer sensory trials. Fresh liquid acid whey protein concentrates from cottage cheese manufacture can be used as a liquid protein ingredient source for manufacture of yogurt in the same factory.

Acid whey is a byproduct of cheesemaking that is difficult to use because of its low pH and less-favorable processing properties compared with rennet whey. The aim of this study was to evaluate the qualities of fermented beverages made using acid whey. In manufacturing the beverages, we used probiotic cultures Lactobacillus acidophilus LA-5 or Bifidobacterium animalis ssp. lactis BB-12. The production process included combining pasteurized acid whey with UHT milk, unsweetened condensed milk, or skim milk powder. We introduced milk to enrich casein content and obtain a product with characteristics similar to that of fermented milk drinks. The products were stored under refrigerated conditions (5 ± 1°C) for 21 d. During storage, we assessed the beverages' physicochemical properties and organoleptic characteristics. The properties of the beverages depended on their composition, microbial culture, and storage time. Beverages containing L. acidophilus had higher acidity, which increased during storage; the acidity of samples containing B. animalis was more stable. Beverages made with skim milk powder (La1 and Bb1) had higher acetaldehyde content, but this parameter decreased in all samples during storage. The hardness of the samples did not change during storage and was highest in beverage La3, made from whey, condensed milk, and L. acidophilus. Beverage La2, made from whey, milk, condensed milk, and L. acidophilus, had the best sensory properties. The whey beverages we developed provided a good medium for the probiotic bacteria; bacteria count throughout the storage period exceeded 8 log cfu/mL, distinctly higher than the minimum therapeutic dose.

Milk protein concentrates are common ingredients in the dairy industry, with varying processing histories and composition. The objective of this research was to determine the feasibility of using the whey protein nitrogen (WPN) index, a well-established index for skim milk powder and nonfat dry milk, as a quality parameter for milk protein concentrates. The WPN index is a value based on the moisture-adjusted weight of skim milk powder. We hypothesized that WPN, even when standardized based on protein, may change depending on solubilization conditions of milk protein concentrates because of differences in solubilization conditions or processing history. The WPN was measured for model concentrates with different thermal history or reconstitution conditions. The WPN was not affected by an increased concentration of soluble casein in the dispersions nor after solubilization of the powder at 22 or 60°C. All reconstituted samples were standardized for protein. The WPN was also in full accordance with residual native protein measured by chromatography.

2-Hydroxy-4-(methylthio)butanoate (HMTBa) is a methionine analog that has been observed to attenuate biohydrogenation (BH)-induced milk fat depression (MFD), possibly through reducing the shift to altered BH pathways. It has also been suggested that HMTBa increases microbial protein synthesis in the rumen. Our objectives were to stimulate BH-induced MFD and (1) verify HMTBa inhibition of BH-induced MFD and changes in milk fatty acids (FA) associated with altered rumen BH (i.e., trans-10 C18:1); and (2) determine the effect of HMTBa on milk fat (i.e., odd- and branched-chain FA) and urine biomarkers related to microbial N flow. Twenty-four multiparous cows (45.6 ± 8.5 kg of milk/d; mean ± standard deviation) and 12 primiparous cows (32.8 ± 3.1 kg of milk/d) were arranged in a crossover design. Treatments were unsupplemented control and HMTBa fed at 0.1% of diet dry matter intake. The experiment was 80 d and included a 10-d pretrial covariate period. Each experimental period included 2 phases that differed in risk for BH-induced MFD, including a 28-d low-risk phase (31.6% neutral detergent fiber, 21.8% starch, and no oil) and a 7-d moderate-risk phase (28.7% neutral detergent fiber, 28.1% starch, and 1.0% soybean oil). We found no interaction of treatment and parity. Milk fat yield (1.43 ± 0.51 kg/d) and milk fat trans-10 C18:1 (0.42 ± 0.08 g/100 g of FA) did not differ between treatments during the low-risk phase. However, during the moderate-risk phase, HMTBa maintained higher milk fat concentration (3.91 vs. 3.79%), tended to maintain higher milk fat yield (1.44 vs. 1.38 kg/d), and decreased milk fat trans-10 C18:1 (0.61 vs. 0.93% FA) compared with control. Additionally, HMTBa increased milk fat concentration and secretion of odd- and branched-chain FA by 5.3 and 10.2%, respectively, but urinary biomarkers of microbial N flow (i.e., purine derivatives) did not differ between treatments. However, rumen bacterial samples were not available to provide cow- or treatment-specific microbial protein-to-marker ratios, which is a critical source of variation. Additionally, transfer of odd- and branched-chain FA to milk is dependent on several factors that may affect interpretation of these biomarkers. In conclusion, HMTBa decreased absorption of alternate BH intermediates and maintained higher milk fat when feeding a diet with moderate-risk for MFD.

In recent years, yogurt has been one of the most popular fermented dairy products and is sold worldwide. In this study, pH and titrated acid changes of 4 strains of Lactobacillus delbrueckii ssp. bulgaricus fermented milk during storage were detected. The difference between L. bulgaricus KLDS1.1011 and KLDS1.0207 was significant, with the latter exhibiting reduced acidity levels. Therefore, we determined the complete genome sequence of the 2 strains. Then the expression of specific genes and common genes related to glucose metabolism and proteolysis of L. bulgaricus KLDS1.1011 and KLDS1.0207 were detected by quantitative real-time reverse-transcription PCR. Analysis indicated that the key enzymes in glycometabolism and proteolysis of L. bulgaricus KLDS1.1011 were significantly different than those of L. bulgaricus KLDS1.0207. The contents of lactose and glucose decreased during storage of L. bulgaricus fermented milk, as determined by HPLC, and the contents of lactic acid and galactose increased, with L. bulgaricus KLDS1.1011 increasing less. With skim milk as a raw material, L. bulgaricus KLDS1.1011, KLDS1.0207, and Streptococcus thermophilus S1 were used as fermentation strains to yield yogurt at 42°C, and sensory evaluation was compared with yogurt fermented by commercial starter cultures. Yogurt from L. bulgaricus KLDS1.1011 was the highest-rated. Therefore, the study may provide guidelines for the development of yogurt starters.

High-yielding dairy cows experience a negative energy balance and inflammatory status during the transition period. Fat supplementation increases diet energy density, and plasma n-3 polyunsaturated fatty acids (PUFA) have been proposed to improve immune function. This study tested the hypothesis that dietary supplementation with a rumen-protected and n-3 PUFA-enriched fat could ameliorate both the energetic deficit and immune status of postpartum high-yielding dairy cows, improving overall health and reproductive efficiency. At 11 d in milk (DIM), cows were randomly allocated to groups (1) n-3 PUFA (n = 29), supplemented with encapsulated linseed oil supplying additional up to 64 g/d (mean 25 ± 4 g/d) of α-linolenic acid (ALA), or (2) control (n = 31), supplemented with hydrogenated palm oil without ALA content. Fat supplements of the n-3 PUFA and control groups were available through an automated, off-parlor feeding system, and intake depended on the cow's feeding behavior. Plasma ALA concentrations were higher in n-3 PUFA than control cows, following a linear relation with supplement ingestion, resulting in a lower n-6/n-3 ratio in plasma. Metabolic parameters (body condition score and glucose and β-hydroxybutyric acid blood concentrations) were unaffected, but milk yield improved with increased intake of fat supplements. Plasma total adiponectin concentrations were negatively correlated with ingestion of n-3 PUFA-enriched fat supplement, following a linear relation with intake. Conception rate to first AI increased with higher intake of both fats, but a decrease of calving-to-conception interval occurred only in n-3 PUFA cows. Postpartum ovarian activity and endometrial inflammatory status at 45 DIM were unaffected. In conclusion, this study evinced a positive linear relation between rumen-protected linseed fat intake and plasma n-3 PUFA concentrations, which modulated adiponectin expression and improved reproductive parameters.

Cow milk protein is one of the leading food allergens. This study aimed to develop an effective method for reducing milk sensitization by evaluating antigenicity of fermented skim milk protein using Lactobacillus helveticus KLDS 1.8701, Lactobacillus plantarum KLDS 1.0386, and a combination of both strains. The proteolytic systems of strains in terms of genotype and phenotype are characterized by complete genome sequence, and evaluation the antigenicity of skim milk proteins was determined by ELISA and liquid chromatography with tandem mass spectrometry. Our results showed that the genomes encoded a variety of peptidase genes. For fermented skim milk, the degree of hydrolysis of the combined strains was higher than that of individual strain. Electrophoresis showed that the band color density of α-casein (α-CN) by fermentation of the combined strains was reduced when compared with control group. The fermentation process of the combined strains inhibited α-CN, β-lactoglobulin, and α-lactalbumin antigenicity by 69.13, 36.10, and 20.92, respectively. Major allergic epitopes of α-CN and β-lactoglobulin were cleaved by abundant proteases of combined strains. In all, this study showed that the fermentation process involving both L. helveticus and L. plantarum strains could reduce cow milk protein allergenicity through the combination of cell-envelope proteinase and peptidase on α-CN.

Fat-free chocolate milk formulations containing skim milk, cocoa powder, and sugar were thermally treated and then processed using high-pressure jet (HPJ) technology from 125 to 500 MPa. The rheological properties and stability of HPJ-treated chocolate milks were compared with controls (no HPJ processing) prepared both with and without added κ-carrageenan. As expected, carrageenan-free chocolate milk exhibited immediate phase separation of the cocoa powder, whereas formulations containing κ-carrageenan were stable for 14 d. An increased stability was observed with increasing HPJ processing pressure, with a maximum observed when chocolate milk was processed at 500 MPa. The apparent viscosity at 50 s−1 of HPJ-processed samples increased from ~3 mPa·s to ~9 mPa·s with increasing pressure, and shear-thinning behavior (n

Shelf-stable cultured milk beverages that have high protein levels can be difficult to successfully manufacture. With increasing protein level, rapid phase separation and gel formation occur in cultured beverages, which may not be prevented even with the inclusion of stabilizers such as high methoxy (HM) pectin. To limit protein aggregation in cultured milk beverages we investigated micellar casein as an interesting alternative to milk, due to the absence of whey proteins, which can contribute to increased gel strength in cultured products. In this study, micellar casein dispersed in ultrafiltered milk permeate was fermented to pH 4.1, blended with HM pectin, homogenized, thermally processed, and bottled for storage at ambient temperature for 6 mo. Utilizing response surface methodology with a central composite rotatable design, the protein and pectin contents were varied between 5 and 9% and 0.0 and 1.0%, respectively. The elastic modulus, loss tangent, and yield stress of these beverages were measured during storage to observe the extent of bond restructuring, whereas particle size and visual phase separation were measured to determine stability. Response variables were measured initially after thermally processing the beverages, and after 1 and 6 mo of storage at ambient temperature. All samples quickly formed gels after homogenizing, regardless of the pectin level. The stiffness (elastic modulus) of all samples increased throughout storage and was determined mainly by the protein content; however, the growth of elastic bonds over time was slowed with high levels of pectin. At 6 mo of storage, yield stress values were significantly lower for beverages with7.5% protein when they were stabilized with ≥0.85% pectin. Prediction models for visual phase separation in beverages stored for 6 mo were significantly affected by the protein content, with increasing instability at lower protein levels. Models were used to identify optimal protein (7.5%) and pectin (≥0.85%) concentrations to minimize the stiffness of gels during ambient storage. Samples in this optimized region were predicted to have low yield stress values and were easily fluidized by gentle shaking of the bottle at 6 mo.