Search

To investigate current Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) technologies applied in the treatment of dentofacial deformities secondary to condylar osteochondroma and introduce a modified method with additional pre-bent titanium miniplates to improve the accuracy of operation.Literature review about the application of CAD/CAM in the treatment of condylar osteochondroma and secondary dentofacial deformities was conducted. And 8 patients with condylar osteochondroma and secondary dentofacial deformities were treated by the CAD/CAM cutting and drilling surgical guides as well as pre-bent titanium miniplates. Pre- and post-operative 3D-cephalometric measurement were recorded and the difference between virtual simulation and postoperative modeling images was measured. Follow-up and radiographic examinations were performed.A total of 17 studies (including 216 patients) about the application of CAD/CAM in the treatment of dentofacial deformities secondary to condylar osteochondroma have been reported since 2010, including the 8 present patients. In our study, all patients were satisfied with the surgical outcome, without obvious relapse or evidence of temporomandibular joint disorder or other complications during follow-up; all patients avoided condylar reconstruction and sagittal split of ramus osteotomy on the ipsilateral mandible side. Comparison between simulated plans and actual postoperative outcomes showed surgical simulation plan was accurately transferred to the actual surgery.The application of CAD/CAM cutting and drilling guides as well as pre-bent titanium plates could achieve more accurate and favorable outcomes, improving the clinical planning and surgical execution for patients with condylar osteochondroma and secondary dentofacial deformities.

The aim of this study is to evaluate the osteogenesis around titanium implant and in bone defect or fracture in jaw bones and long bones in ovariectomized (OVX) animal models. The literature on the osteogenesis around titanium implant and in bone defect or fracture in jaw bones and long bones was reviewed with charts. Fourty-eight rats were randomly divided into OVX group with ovariectomy and SHAM (sham-surgery) group with sham surgery. Titanium implants were inserted in the right mandibles and tibiae; bone defects were created in the left mandibles and tibiae. Two-week postoperatively, mandibles and tibiae of 8 rats were harvested and examined by hematoxylin and eosin staining and histological analysis; 4-week postoperatively, all mandibles and tibiae were harvested and examined by Micro-CT and histological analysis. A total of 52 articles were included in this literature review. Tibial osteogenesis around titanium implant and in bone defect in OVX group were significantly decreased compared with SHAM group. However, osteogenesis differences in the mandible both around titanium implant and in bone defect between groups were not statistically significant. OVX-induced osteoporosis suppresses osteogenesis around titanium implant and in the bone defect or fracture in long bones significantly while has less effect on that in the jaw bones.

Computer-aided surgery has been widely used in treatment of hemifacial microsomia and matured in recent decades. These techniques include the computer-aided design, virtual surgical planning, modeling surgery, rapid prototyping techniques, intraoperative navigation and so on. The purpose of this article is to summarize the current application of computer-aided design/computer-aided manufacturing technology in the treatment for hemifacial microsomia during the last 5 years, as well as the views and discussions on some topics, and finally introduce a method of our team. Our effort is that using the holes predrilled in cutting guides, the pre-bent titanium plates are easily placed. Avoiding potential bone autorotation caused by unfitness between conventional titanium plates and bone surface, which keeps the bone fixation precisely in line with the preoperative virtual plan and reduce the movement of bone segments due to the undesirable stress of the plates.

Maxillary hypoplasia is a common developmental deformity affecting patients with cleft lip and palate. Various surgical techniques including conventional orthognathic surgery, total maxillary distraction osteogenesis, and anterior maxillary segmental distraction have been applied to address the deformity. With the evolution of 3D computed tomography imaging, the visualization of skeletal complexities in different perspectives is greatly enhanced and comprehensive surgical planning is achieved. Intraoperative efficiency is also improved with the fabrication of 3D-printed templates. The study aims to present different surgical techniques with virtual surgical planning (VSP) and 3D-printed surgical templates and the solution of representative cases. From January 2014 to January 2019, VSP was transferred to actual surgery or distraction precisely in 80 adult patients with cleft-related maxillary hypoplasia. The accuracy was analyzed and the relapse was also estimated and observed in 18 patients after 1-year follow-up. Based on our experience, VSP provides a more reliable and effective option to conventional model surgery. It facilitates the preoperative planning and accurately transfers the virtual plan to correct the cleft-related maxillary hypoplasia.

Wnt/β-catenin signal is required in bone formation and remodling, but little is known about whether Wnt/β-catenin signal could promote osteogenic differentiation of rat bone marrow mesenchymal stem cells (BMSCs) after uniaxial mechanical stretch. In this study, rat BMSCs were identified by flow cytometry and used for mechanical stretch. A custom-made uniaxial dynamic stretch apparatus was applied for rat BMSCs stretch. There were 2 groups in the study: the mechanical stretch group and the nonstretch control group. Cell morphology, alkaline phosphatase (ALP) activity, mRNA levels (Wnt3a, Lrp5, β-catenin, as well as Runx2 were evaluated using quantitative real-time reverse transcription-polymerase chain reaction) and protein levels (β-catenin and Runx2 were examined using western blot) were observed in both groups. The authors finally found that not only the cell proliferation, ALP activity, but also mRNA expression of Wnt3a, Lrp5, β-catenin, and Runx2 in BMSCs were markedly elevated by mechanical stretch than the controls. Protein levels of β-catenin and Runx2 were significantly higher than that of control as well. Activation of mechanical stretch was partially reversed by DKK-1, a classical inhibitor of Wnt/β-catenin signal. These results demonstrate that uniaxial mechanical stretch could stimulate osteogenic differentiation and proliferation of BMSCs by activating the Wnt/β-catenin signaling.

Objective Surgical treatment of condylar osteochondroma combined with secondary dentofacial deformities is a significant clinical challenge. The authors present this review article to provide some guidelines for the surgical treatment for this severely complex condition. Materials and methods Diagnosis and treatment protocol of condylar osteochondroma patients combined with secondary dentofacial deformities are discussed at the basis of published literatures and the authors' own clinical experiences. Proper treatment protocol was designed according to features of tumor and dentofacial deformities. Follow-up and radiographic examination was performed to evaluate recurrence of tumor, occlusion, joint function, and facial appearance after surgery. Results The patients received 1 or several methods of resection of tumor, condylar reconstruction, correction of skeletal deformities, and treatment of malocclusion. The condylar ostechondroma and secondary dentofacial deformities were treated satisfactorily. Temporomandibular joint function, occlusion, and facial appearance were improved obviously after operation evidenced by radiographic examination and follow-up. Conclusion Surgical management of condylar osteochondroma with secondary dentofacial deformities requires careful patient selection, treatment planning, and precise execution. This article has reviewed the current status of surgical treatment options and provided practical guidelines for oral and maxillofacial surgeons to consider their clinical practice.

BACKGROUND Surgical correction of craniosynostosis in children is associated with substantial intraoperative bleeding. Intraoperatively administered tranexamic acid (TXA) can lessen blood loss during orthopedic and cardiovascular surgery, but its efficacy in craniosynostosis surgery is uncertain. Therefore, a meta-analysis performed with published comparative studies was to determine whether TXA could reduce packed red blood cells (or erythrocytes) (PRBCs) transfused and blood loss during pediatric craniosynostosis surgery. METHODS Two PubMed and EMBASE electronic databases were searched until June 2012. Eligible studies were restricted in comparative controlled trials. RESULTS Four studies in 3 articles with 138 patients were included. The results showed that intraoperative administration of TXA can significantly reduce transfusion of PRBCs (weighed mean difference [WMD] = -10.81, 95% confidence interval [CI] = -16.84 to -4.78, P < 0.00001). In the level of blood loss, the meta-analysis on 4 studies showed that the difference was statistically significant (WMD = -20.53, 95% CI = -32.26 to -8.80, P = 0.0006) between the TXA groups and the control groups. However, the subgroup analysis on randomized controlled trials showed that TXA did not significantly reduce blood loss during surgery compared with the placebo group (WMD = -30.79, 95% CIs = -71.72 to 10.14, P = 0.14). CONCLUSIONS Tranexamic acid can significantly reduce the transfusion of PRBCs in children undergoing craniosynostosis surgery. However, there is a controversy on the efficacy of TXA in reducing blood loss. Therefore, new randomized controlled trials to assess the effects of TXA in children with craniosynostosis surgery should be conducted.