Search

The research has analyzed the axial behavior of an innovative L-shaped composite column. The L-shaped composite columns could work as series rectangular composite columns, which could take advantage of the steel tubes and the inner concrete. Seven specimens have been tested to analyze the failure progress, load-carrying capacity and failure mode. Main parameters were the length-to-width ratio and length-to-depth ratio. The shear failure mode accompanied by local buckling appeared for the tested specimens. The results showed that such columns possessed high strength and good ductility. A finite element model was established and verified by the experimental results. Results showed that the finite element model could simulate the axial behavior of the L-shaped composite columns well. Parametric analysis was conducted to analyze the influence on the axial behavior of composite columns. Furthermore, a theoretical model was proposed to calculate the axial strength of such component and was in good agreement with the experimental results. A simplified formula has been proposed for determining the axial strength according to the results of parametric analysis of FEA and the theoretical model. In addition, the calculated results based on design methods specified in EC4, CECS and AISC have been compared with the experimental results, the results of theoretical model and the results of simplified formula. Among them, the results of EC4 were the closest to the experimental results. [Display omitted] • An innovative multi-partition steel-concrete composite column is proposed. • The axial experiments and finite element analysis have been done to study the axial behavior. • A simplified method has been proposed for the design of the axial strength. • An improved stability factor is added in the simplified formula. [ABSTRACT FROM AUTHOR]

This study experimentally and numerically explores the axial-compression behaviours of tapered recycled aggregate concrete-filled high-strength double skin steel tubular (RAC-FHDST) stub column. Twelve specimens were fabricated and tested, considering the effects of tapered angle, hollow ratio and replacement level of coarse recycled aggregate (CRA). The experimental results, consisting of deformation patterns, axial load versus strain responses and confining effect from external high-strength steel tube were obtained and analyzed. Failure mode showed that all stub columns exhibited good ductile behaviour. The elastic stiffness and ultimate strength of RAC-FHDSTs decreased with rising tapered angles, while the ductile index increased. As the replacement levels of CRA varied from 0% to 100%, the elastic stiffness and ductility index obviously reduced. Larger confining effect from outer steel tube to RAC occurred close to the top section of specimens, and the occurrence of confinement was advanced with decreasing hollow ratio and increasing CRA content. Additionally, detailed numerical models were constructed and validated using experiment results. The validated finite element (FE) models were then employed to analyze the working mechanism of specimen, encompassing the load distributions and the interaction between the sandwiched RAC and steel tubes. Afterwards, a parametric study was performed to reveal the influences of essential parameters on the axial compressive performance. Finally, the existing design approaches to normal CFST and CFDST stub columns were employed to assess their applicability for estimating the ultimate strengths of tapered RAC-FHDSTs. • Axial-load tests conducted on 12 RAC-FHDST stub columns. • Effects of tapered angle, hollow ratio and CRA content on the axial response of RAC-FHDSTs. • Confinement effect from outer high-strength steel tube. • The applicability of existing design provisions to tapered RAC-FHDSTs. [ABSTRACT FROM AUTHOR]