Search

This study deal with the development and investigation of a novel hybrid nano-shell plant fiber biocomposite. Nano-calcium carbonate CaCO3 ranging from 1 to 5 wt% and 20 wt% banana fiber-filled hybrid biocomposite were prepared using a hand lay-up process followed by applying load on a closed mold. Nano-CaCO3 of near-uniform size and shape was synthesized from Achatina Fulica through a mechanochemical technique. The effect loading fiber of uniform 30 mm size on the mechanical, physical, thermal properties of greenpoxy composite was investigated. The influence of nano-CaCO3 loading (1 to 5 wt%) on banana fiber-filled greenpoxy composite, dynamic mechanical properties, tensile, flexural, impact strength was further investigated. The result showed that the loading of banana fiber improved mechanical properties and negatively affected temperature dependence storage modulus, loss modulus, and tan δ. Better load carrying and stress distribution capacity of the fiber within the biocomposites can be attributed to the high strength and stiffness observed for these series. The poor thermal properties of banana fiber can be ascribed to a decrease in the temperature dependence properties. The loading of nano-CaCO3 improved most of the banana-filled greenpoxy biocomposite, and hybrid composite with 2 wt% nano-CaCO3 offered superior properties. Uniform dispersion, excellent matrix/nano-CaCO3/banana fiber adhesion provided a strong structure, resulting in improved mechanical and temperature-dependant properties. [ABSTRACT FROM AUTHOR]

The main objective of this work was to explore for the first time the potential of the co-grinding process using a high-energy vibrated ball mill to prepare poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/wheat straw fibers biocomposites. Grinding conditions of virgin PHBV pellets were examined by focusing on the evolution of particle size, morphology, crystallinity, and molecular weight. Temperature and grinding duration were demonstrated to be the key parameters affecting PHBV milling. In a second step, mechanical properties of biocomposites prepared by cryo-co-grinding were discussed in relation to the processing conditions and the resulting structure of materials. Comparing to virgin PHBV, the reinforcing effect of wheat straw fibers was very poor, regardless of the good dispersion of fibers within the polymer matrix induced by co-grinding. The increased brittleness and decreased toughness of biocomposites were attributed to (a) a poor interfacial compatibility between wheat straw fibers and PHBV and (b) the degradation of PHBV during processing, as revealed by the decrease in molecular weight. [ABSTRACT FROM AUTHOR]

In this study, crystalline cellulose was prepared through hydrolysis of jute fiber and was used as reinforcement of gelatin-based biocomposite film. The effects of crystalline celluloses loading on the morphology, mechanical properties and water sensitivity of the biocomposite were investigated by means of Scanning electron microscopy, tensile strength testing and water absorption testing. The developed biocomposite film showed homogeneous dispersion of crystalline celluloses within the gelatin matrix and strong interfacial adherence between matrix and reinforcement. A significant increase in tensile strength and E Modulus was also found (tensile strength was 25.4 MPa for pure gelatin and 48.2 MPa for 2% crystalline celluloses/gelatin film at 45% relative humidity), which was further induced by gamma radiation. The resulting biocomposite film also showed a higher water resistance and excellent biocompatibility. Therefore, crystalline celluloses played an important role in improving the mechanical properties as well as water resistance of the biocomposite film. [ABSTRACT FROM AUTHOR]

In this study, novel acrylated epoxidized hemp oil bioresin was used in the manufacturing of jute fibre reinforced biocomposites. The 100% biocomposite laminates were characterised in terms of mechanical properties (tensile, flexural, Charpy impact and interlaminar shear), thermo-mechanical properties (glass transition temperature, storage modulus and crosslink density) and water absorption properties (saturation moisture level and diffusion coefficient). Comparisons with the equivalent synthetic vinylester resin based jute fibre reinforced biocomposite panels were performed. Scanning electron microscopic analysis confirmed panel samples containing acrylated epoxidized hemp oil to display improved fibre–matrix interfacial adhesion compared with the vinylester resin based samples. Furthermore in terms of mechanical properties acrylated epoxidized hemp oil based biocomposites compared favourably with those manufactured from vinylester resin synthetic resin. Dynamic mechanical analysis found acrylated epoxidized hemp oil based biocomposites to have lower glass transition temperature, storage modulus and crosslink density than vinylester resin based samples. Increasing acrylated epoxidized hemp oil content resulted in a marginal increase in saturation moisture content and diffusion coefficient. [ABSTRACT FROM PUBLISHER]

Novel biocomposites made of an acrylated epoxidized hemp oil based bioresin reinforced with random hemp fiber mat were manufactured by the vacuum infusion technique. Mechanical properties (tensile, flexural, Charpy impact and interlaminar shear), dynamic mechanical properties (glass transition temperature, storage modulus and crosslink density) and moisture absorption properties (saturation moisture level and diffusion coefficient) were investigated and compared with samples manufactured under the same conditions but using a commercial synthetic vinylester resin as the polymeric matrix. Results showed that the 100% biocomposites mechanical performance is comparable to that of the hybrid composites made with the synthetic resin. Moisture absorption tests showed that acrylated epoxidized hemp oil based samples displayed both higher diffusion coefficient and saturation moisture content; however, fiber reinforcement was the dominant transfer mechanism. Vinyl ester based samples were found to have higher storage modulus, glass transition temperature and crosslink density than acrylated epoxidized hemp oil samples. [ABSTRACT FROM AUTHOR]