Search

[Display omitted] • CoSe 2 -MoSe 2 (1–1)/rGO has good HER activity in both acidic and alkaline media. • The CoSe 2 -MoSe 2 (1–1) nanosheets uniformly decorate the rGO matrix. • DFT results verify CoSe 2 -MoSe 2 (1–1) heterostructure owns small band gap and ΔG H*. • The rGO matrix and heterojunction structure improve the electronic conductivity. It is important to develop novel energy to solve energy shortage and environmental problems. Hydrogen evolution reaction (HER) is envisaged as a viable technology that can be used to develop sustainable clean energy. Herein, we report a catalyst with CoSe 2 -MoSe 2 heterostructure grown on reduced graphene oxide with an optimum Co/Mo proportion of 1:1 (CoSe 2 -MoSe 2 (1–1)/rGO). It exhibits good HER activities in both acidic and alkaline conditions. The CoSe 2 -MoSe 2 (1–1)/rGO shows an overpotential of 107 mV at 10 mA cm−2 with a Tafel slope of 56 mV dec−1 under acidic condition. Meanwhile, CoSe 2 -MoSe 2 (1–1)/rGO also presents an overpotential of 182 mV at 10 mA cm−2 and with a Tafel slope of 89 mV dec−1 under alkaline condition. These impressive performances of the catalyst are mainly due to the excellent electronic transmission capability of rGO and the abundant active sites of CoSe 2 -MoSe 2 heterostructure as well as the optimized hydrogen adsorption energy of CoSe 2 -MoSe 2 interface. The design of CoSe 2 -MoSe 2 (1–1)/rGO provides a meaningful guide for manufacturing electrode in energy storage and conversion. [ABSTRACT FROM AUTHOR]

[Display omitted] • FeSe 2 -MoSe 2 (1-1)/rGO has good HER activity in both acidic and alkaline media. • FeSe 2 -MoSe 2 (1-1)/rGO has well stability in both acidic and alkaline media. • On the morphology, FeSe 2 -MoSe 2 nanoparticles uniformly decorate the rGO matrix. • DFT results verify the FeSe 2 -MoSe 2 (1-1)/rGO owns small work function. It is of great significance to develop inexpensive and high-efficiency electrocatalysts for the hydrogen evolution reaction (HER). In this work, we synthesized iron molybdenum selenide (FeSe 2 -MoSe 2) loaded on reduced graphene oxide (FeSe 2 -MoSe 2 /rGO) by a one-step hydrothermal method. We further optimized the Fe/Mo ratio and determined the best ratio to be 1-1. In acidic (or alkaline) solution, the optimized FeSe 2 -MoSe 2 (1-1)/rGO has a small Tafel slope of 55 (or 80) mV dec−1 and needs an overpotential of 101 (or 178) mV to achieve 10 mA cm−2. These good properties are mainly due to the structure of bimetallic selenides combining rGO. Moreover, rGO enhances the electrical conductivity. Furthermore, the synergistic effect between FeSe 2 -MoSe 2 (1-1) and rGO results in better HER performance. Density functional theory (DFT) calculation proves that FeSe 2 -MoSe 2 (1-1)/rGO has a small work function. Based on our reasonable design and analysis, FeSe 2 -MoSe 2 (1-1)/rGO is expected to be an efficient and robust catalyst for large-scale applications. [ABSTRACT FROM AUTHOR]

Binary metal niobium oxides can offer a higher specific capacity compared to niobium pentoxide (Nb 2 O 5) and thus are ideal anode candidates for lithium ion capacitors (LICs). However, their lower electronic conductivity limits their ability to achieve high energy and power densities. In this paper, one-dimensional (1D) copper niobate (CuNb 2 O 6) nanowires are successfully prepared by electrospinning technology and then immobilized on two-dimensional (2D) reduced graphene oxide (rGO) nanosheets to form a unique 1D nanowire/2D nanosheet CuNb 2 O 6 /rGO structure. The 1D/2D CuNb 2 O 6 /rGO electrode exhibits a high specific capacity of 312.2 mAh g−1 at 100 mA g−1 as the anode of LICs. The proposed Li+ storage mechanism of the CuNb 2 O 6 anode involves CuNb 2 O 6 decomposition into lithium niobate (Li 3 NbO 4) and copper (Cu) during the initial lithium insertion process. The intercalation-type Li 3 NbO 4 will further serve as the host to Li+ and the inactive Cu phase will act as a conductive network for electron transportation. Furthermore, the energy density of the assembled CuNb 2 O 6 /rGO//activated carbon (CuNb 2 O 6 /rGO//AC) device could achieve a value as high as 92.1 Wh kg−1 and could thus be considered as a possible alternative electrode material for high energy and power LICs. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Flexible supercapacitor plays a progressively more important part in power source for smart electronic devices and how to enhance its energy density is the urgent issue to be addressed. Hence, a hybrid electrode of Polypyrrole@reduced graphene oxide hydrogel (PPy@rGOH) is synthesized via a combine hydrothermal treatment of GO solution to assemble hydrogel and subsequently in-situ electropolymerization preparation of PPy on the surface of graphene. Through controlling the time of electropolymerization, the resultant PPy@rGOH-20 s with high specific surface area exhibits an excellent specific capacitance of 340 F g−1 at a current density of 1 A g−1 and superior cycling stability of 87.4% capacitance retention after 10,000 charging/discharging cycles at 3 A g−1 in 1 M KNO 3. The assembled flexible asymmetric supercapacitor (FASC) by employing the PPy@rGOH-20s as positive electrode and pure rGOH as negative electrode presents a maximum operational voltage window of 1.6 V and high energy density of 46.9 W h kg−1, which is higher than polymer/carbon-based supercapacitors previously reported. [ABSTRACT FROM AUTHOR]