Search

[Display omitted] • Precursors of salvaged cyanobacteria for Fe-N@C avoided extra additions and saved costs. • Synergistic effect of Fe-N X and graphitic nitrogen efficiently facilitated PMS activation and OFX degradation. • Non-free radicals based on 1O 2 and high-valent iron-oxo species played a major role in OFX degradation. • Fe-N@C-800/PMS system had a strong resistance to influence of inorganic anions. A green, low-cost, high-performance Fe/N co-doped biochar material (Fe-N@C) was synthesized using salvaged cyanobacteria without other extra precursors for peroxymonosulfate (PMS) activation and ofloxacin (OFX) degradation. With the increased pyrolysis temperature, the graphitization degree, the specific surface area and the corresponding groups like OH, COO etc. for Fe-N@C tended to increase, resulting in a greater OFX adsorption. However, the total amount of Fe-N X and graphitic nitrogen groups in the Fe-N@C composites was firstly increased and then decreased, which reached the highest at 800 °C (Fe-N@C-800). All these changes of functional species ascribed to the strong interaction between Fe, N and C led to the highest defect degree of Fe-N@C-800, resulting the highest OFX removal efficiency of 95.0 %. OFX removal experiments indicated the adsorption process promoted the total OFX degradation for different functional groups on Fe-N@C composites separately dominated the process of OFX adsorption and PMS catalysis. Radical quenching and electron paramagnetic resonance (EPR) measurements proved free radical and non-free radical pathways participated in Fe-N@C/PMS system. The non-free radicals based on 1O 2 and high-valent iron-oxo species played a more important role in OFX degradation, leading to the minimal effect of co-existing anions and the high universality for other antibiotic pollutants. Fe-N X was utilized as the main catalytic sites and graphitic nitrogen contributed more to the electron transfer for PMS activation, whose synergistic effect efficiently facilitated OFX degradation. Finally, the possible degradation route of OFX in the Fe-N@C-800/PMS system was proposed. All these results will provide the new insights into the intrinsic mechanism of Fe/N species in carbon-based materials for PMS activation. [ABSTRACT FROM AUTHOR]

This work aimed to develop a feasible technology to reuse dead pig biowaste for heavy metals removal, which was first carbonized into pig bone char (PBC) after pyrolysis and further functionalized with amino (NH 2) to improve its affinity with heavy metals. The application of PBC after NH 2 -functionalization for aqueous heavy metals removal was explored, including Pb2+, Cu2+, and different complex Cu(II) species. PBC@SiO 2 -NH 2 showed comparable performance with AC@SiO 2 -NH 2. The adsorption capacity of Pb2+ and Cu2+ by PBC@SiO 2 -NH 2 was 120 and 30 mg g−1, respectively. The NH 2 functionalization enhanced the adsorption of complex Cu(II) species, and PBC@SiO 2 -NH 2 exhibited good performance under a wide pH range and coexisting ions. The adsorption of Cu(II) EDTA species with an EDTA/Cu(II) molar ratio of 1.0 by PBC would be enhanced ~3 times and ~6 times after NH 2 functionalization and further addition of Fe3+, respectively. The results of EDX, elemental mapping, and XPS confirmed the adsorption of Cu(II) species. The adsorption kinetics, isotherm, and thermodynamics of different Cu(II) species by PBC@SiO 2 -NH 2 were investigated. The regeneration of PBC@SiO 2 -NH 2 was easily performed via acidic wash. These results suggested the application potential of the reuse of biowaste, which could be a promising adsorbent for aqueous heavy metals after specific functionalization. [ABSTRACT FROM AUTHOR]

Highlights: [•] nZVI assembled on magnetic Fe3O4/graphene nanocomposites is synthesized. [•] Better dispersion and stability of nZVI are achieved. [•] These nanocomposites exhibit high removal efficiency on Cr(VI). [•] Cr(VI) adsorption and reduction via nZVI-graphene/Fe3O4 battery work synergically. [ABSTRACT FROM AUTHOR]

Abstract: Ni/Fe bimetallic nanoparticles were synthesized for treatment of Aroclor 1242, in order to evaluate their applicability for in situ remediation of groundwater and soil contaminated by polychlorinated biphenyls (PCBs). Our experimental results indicate that the total PCB concentration changed during the reduction of 3,5-dichlorobiphenyl (PCB 14), and biphenyl was produced as the final product. Initially, the concentration of 3-chlorobiphenyl (PCB 2) was increased in the prophase reaction and then slowly decreased, suggesting that Aroclor 1242 was first adsorbed by Ni/Fe nanoparticles, and then, the higher chlorinated congeners were converted gradually to the lower chlorinated congeners, and finally to biphenyl. The dechlorination efficiency of Aroclor 1242 reached approximately 80% at 25°C in just 5h, then 95.6% and 95.8% in 10h and 24h, respectively. The study revealed that high Ni/Fe nanoparticle dosage and high Ni content in Ni/Fe nanoparticles favor the catalytic dechlorination reaction. Moreover, a comparison of different types of catalysts on the dechlorination of Aroclor 1242 indicated that Ni/Mg and Mg powders showed a greater reactivity than Ni/Fe and Fe nanoparticles, respectively. [Copyright &y& Elsevier]

Abstract: For the first time, nanoscale zero-valent iron (nZVI)–Fe3O4 nanocomposites, prepared by an in situ reduction method, are employed for chromium(VI) removal in aqueous environment. 96.4% Cr(VI) could be removed by these novel materials within 2h under pH of 8.0 and initial Cr concentration of 20mgL−1, compared with 48.8% by bare nFe3O4 and 18.8% by bare nZVI. Effects of several factors, including mass composition of nZVI–Fe3O4 nanocomposites, initial pH and Cr(VI) concentration, were evaluated. The optimal ratio of nFe3O4 to nZVI mass lies at 12:1 with a fixed nZVI concentration of 0.05gL−1. Low pH and initial Cr(VI) concentration could increase both the Cr(VI) removal efficiency and reaction rate. Corresponding reaction kinetics fitted well with the pseudo second-order adsorption model. Free energy change (ΔG) of this reaction was calculated to be −4.6kJmol−1 by thermodynamic study, which confirmed its spontaneous and endothermic characteristic. The experimental data could be well described by the Langmuir and Freundlich model, and the maximum capacity (q max) obtained from the Langmuir model was 100 and 29.43mgg−1 at pH 3.0 and 8.0, respectively. The reaction mechanism was discussed in terms of the mutual benefit brought by the electron transfer from Fe0 to Fe3O4. [Copyright &y& Elsevier]

Abstract: Acid treatment is a routine demineralization process to obtain black carbon (BC), but there has been little systematic research about its influence on BC’s characteristics. In this study, elemental analysis, SEM, FTIR, and Boehm titration were used to investigate that effect. Our results showed that the acid treatment had little influence on the sorption of fly ash and soot to pentachlorophenol (PCP), but it greatly increased the sorption of rice chars to PCP. There were two competing effects of acid demineralization on the adsorption capacity of BC. On one hand, it increased the amount of the acidic functional groups, which decreased the adsorption capacity. On the other hand, it increased the surface and pore volume of BC and caused the emergence of hidden carbon enclosed by minerals, which in turn increased the sorptivity significantly. Especially for rice chars (600°C), after acid treatment, their surface area increased from 3.52 to 235m2 g−1 and the sorption capacity coefficient increased from 2.12 to 4.10. [Copyright &y& Elsevier]