Search

[Display omitted] Polymer materials containing C 6 rings and C O become promising electrode materials for high-performance lithium ion batteries (LIBs). However, the poor electronic conductivity severely restricts its further application. Herein, we design and construct a pyromellitic dianhydride anhydride anthraquinone/reduced graphene oxides (PMAQ/rGO-40) composite as an anode material for LIBs. The PMAQ is uniformly wrapped by conductive rGO nanosheets. The PMAQ/rGO-40 electrode without additional conductive agents displays a discharge capacity of 253 mAh g−1 over 3000 cycles under 2A g−1, which is higher than that of the PMAQ electrode with conductive agents. Meanwhile, a capacity of 196 mAh g−1 is achieved under 5A g−1. The enhanced cycling performance and rate ability are attributed to the rGO conductive network, which promotes electronic transport capability. In addition, the lithium ion storage mechanism and kinetics in the PMAQ/rGO-40 are investigated. The excellent electrochemical performance shows the potential application of the PMAQ/rGO composite anode material for high performance LIBs. [ABSTRACT FROM AUTHOR]

[Display omitted] MoS 2 is regarded as an attractive anode material for lithium-ion batteries due to its layered structure and high theoretical specific capacity. Its unsatisfied conductivity and the considerable volume change during the charge and discharge process, however, limits its rate performance and cycling stability. Herein, 3D tremella-like nitrogen-doped carbon encapsulated few-layer MoS 2 (MoS 2 @NC) hybrid is obtained via a unique strategy with simultaneously poly-dopamine carbonization, and molybdenum oxide specifies sulfurization. The three-dimensional porous nitrogen-doped carbon served both as a mechanical supporting structure for stabilization of few-layers MoS 2 and a good electron conductor. The MoS 2 @NC exhibits enhanced high rate performance with a specific capacity of 208.7 mAh g−1 at a current density of 10 A g−1 and stable cycling performance with a capacity retention rate of 85.7% after 1000 cycles at 2 A g−1. [ABSTRACT FROM AUTHOR]

Architecture of electrode materials plays an important role in achieving favorable electrochemical performance via providing fast electronic transport pathway and shorten lithium ion diffusion distance. Herein, ultrafine CoP nanoparticles were successfully embedded in carbon nanorod, which were grown on the biomass-derived carbon (BC). When applied as anode materials for lithium-ion batteries, these CoP@C/BC displayed capable specific capacity, remarkable rate ability and outstanding long-term cycling performance. The capacity was governed by combination of diffusion-controlled and capacitive processes, according to quantitative kinetic analysis. The good electrochemical performance is attributed to hierarchical construction of nanosized CoP embedded in carbon nanorod and BC with high conductivity composite, which relieve the volume changing of CoP and provide large electrode/electrolyte interface. The present design of hierarchical architecture can be extended to other transition metal-based oxides, sulfide and phosphide electrode materials for high performance alkali metal ion batteries. [ABSTRACT FROM AUTHOR]