Search

[Display omitted] Polymer materials containing C 6 rings and C O become promising electrode materials for high-performance lithium ion batteries (LIBs). However, the poor electronic conductivity severely restricts its further application. Herein, we design and construct a pyromellitic dianhydride anhydride anthraquinone/reduced graphene oxides (PMAQ/rGO-40) composite as an anode material for LIBs. The PMAQ is uniformly wrapped by conductive rGO nanosheets. The PMAQ/rGO-40 electrode without additional conductive agents displays a discharge capacity of 253 mAh g−1 over 3000 cycles under 2A g−1, which is higher than that of the PMAQ electrode with conductive agents. Meanwhile, a capacity of 196 mAh g−1 is achieved under 5A g−1. The enhanced cycling performance and rate ability are attributed to the rGO conductive network, which promotes electronic transport capability. In addition, the lithium ion storage mechanism and kinetics in the PMAQ/rGO-40 are investigated. The excellent electrochemical performance shows the potential application of the PMAQ/rGO composite anode material for high performance LIBs. [ABSTRACT FROM AUTHOR]

Binary metal niobium oxides can offer a higher specific capacity compared to niobium pentoxide (Nb 2 O 5) and thus are ideal anode candidates for lithium ion capacitors (LICs). However, their lower electronic conductivity limits their ability to achieve high energy and power densities. In this paper, one-dimensional (1D) copper niobate (CuNb 2 O 6) nanowires are successfully prepared by electrospinning technology and then immobilized on two-dimensional (2D) reduced graphene oxide (rGO) nanosheets to form a unique 1D nanowire/2D nanosheet CuNb 2 O 6 /rGO structure. The 1D/2D CuNb 2 O 6 /rGO electrode exhibits a high specific capacity of 312.2 mAh g−1 at 100 mA g−1 as the anode of LICs. The proposed Li+ storage mechanism of the CuNb 2 O 6 anode involves CuNb 2 O 6 decomposition into lithium niobate (Li 3 NbO 4) and copper (Cu) during the initial lithium insertion process. The intercalation-type Li 3 NbO 4 will further serve as the host to Li+ and the inactive Cu phase will act as a conductive network for electron transportation. Furthermore, the energy density of the assembled CuNb 2 O 6 /rGO//activated carbon (CuNb 2 O 6 /rGO//AC) device could achieve a value as high as 92.1 Wh kg−1 and could thus be considered as a possible alternative electrode material for high energy and power LICs. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Unique nanostructure, high electrical conductivity, satisfactory energy density, and extraordinary cycling stability are important evaluation criteria for high-efficient energy storage devices. Herein, Fe 3 O 4 nanospheres are successfully in situ decorated on graphene nanosheets through an environmentally benign and facile solvothermal procedure. When utilized as an electrode for supercapacitor, the graphene/Fe 3 O 4 nanocomposite exhibits a notably enhanced specific capacity (268 F·g−1 at 2 mV·s−1) and remarkable cycling performance with 98.9% capacity retention after 10,000 cycles. Furthermore, the fabricated graphene/MnO 2 //graphene/Fe 3 O 4 asymmetric supercapacitor device displays a desirable energy density (87.6 Wh·kg−1) and superior cycling stability (93.1% capacity retention after 10,000 cycles). [ABSTRACT FROM AUTHOR]