Search

Background: Performing an appropriate Class II direct restoration is a great challenge. The correct selection of the matrix system and the elements used for its stabilization will have a great impact on the result. The aim of this study is to show a new digital method for a predictable selection of the wedge and compare it with the conventional method. Methods: Sixty patients were randomly divided into two groups. In Group 0, the wedge was selected intraoperatively by visual examination, while in Group 1 the wedge was selected preoperatively through the measurement of the cervical embrasure on the bite-wing radiography. The number of wedges used, modifications to them, and tissue damage were registered, along with the quality of the proximal contact and the marginal adaptation. Results: Student's t -test revealed a statistical difference between the number of wedges used, which was higher in Group 0 ( p < 0.05). Pearson Chi-square test showed that tissue damage was statistically higher in Group 0 ( p < 0.05), while there was no statistically significant difference between groups in wedge modifications ( p > 0.05). Group 1 revealed a higher frequency of satisfactory proximal contact and marginal adaptation ( p < 0.05). Conclusions: This new technique reduces wedges waste and tissue damage and provides an adequate interproximal anatomy.

The present study aims to evaluate and contrast the function of the rotational speed of NiTi alloy endodontic rotary files on how resistant they are to dynamic cyclic fatigue. Methods: A total of 150 NiTi alloy endodontic rotary files with similar geometrical design and metallurgical properties were randomly divided into study groups: Group A: 200 rpm (n = 30); Group B: 350 rpm (n = 30); Group C: 500 rpm (n = 30); Group D: reciprocating movement at 350 rpm with 120° counterclockwise and 30° clockwise motion (350 rpm+) (n = 30); and Group E: reciprocating movement at 400 rpm with 120° counterclockwise and 30° clockwise motion (400 rpm+) (n = 30). A dynamic device was designed to carry out dynamic cyclic fatigue tests using artificial root canal systems made from stainless steel with an apical diameter of 250 µm, 5 mm radius of curvature, 60° curvature angle, and 6% taper, and 20 mm in length. A Weibull statistical analysis and ANOVA test were used to analyze the results. Results: The ANOVA analysis showed differences in time to failure among all the study groups that were of statistical significance (p < 0.001). Conclusions: NiTi alloy endodontic rotary files using reciprocating movement at 350 rpm with 120° counterclockwise and 30° clockwise motion exhibit greater resistance to dynamic cyclic fatigue than files used with a reciprocating movement at 400 rpm with 120° counterclockwise and 30° clockwise motion, continuous rotational speed at 200 rpm, continuous rotational speed at 350 rpm, or continuous rotational speed at 500 rpm; it is therefore advisable to use reciprocating movements at a low speed.

The aim of this study was to evaluate the effectiveness of smear layer removal after the use of different irrigation methods (passive ultrasonic irrigation (PUI), continuous ultrasonic irrigation (CUI), apical negative pressure irrigation and conventional irrigation) using scanning electron microscopy (SEM) as an analytical tool. A total of 100 single-canal teeth were decoronated and randomly divided into five groups ( n = 20) according to the irrigation method used: conventional irrigation with front outlet syringe, conventional irrigation with lateral outlet syringe, apical negative pressure irrigation (EndoVac), PUI with Irrisafe and CUI with ProUltra PiezoFlow ultrasonic irrigation needle. Root canal preparation was performed with the ProTaper Gold system up to the F4 instrument, and 5.25% NaOCl was used as an irrigant. After chemical-mechanical preparation, the roots were split longitudinally, and the coronal, middle and apical thirds were examined. SEM digital photomicrographs were taken at ×1000 magnification to evaluate the amount of smear layer in each root canal third; CUI significantly removed more smear layer than any other irrigant activation protocol ( p < 0.05); CUI was more effective in removing the smear layer than the other irrigation protocols. However, none of the irrigation protocols were able to produce root canals completely free from smear layer.