Search

Sewage treatment plants (STPs) as a carrier of microplastics (MPs) have received considerable attention worldwide recently. In India, the majority of studies on MPs have been conducted in sediments, riverine, and marine systems, while knowledge on MPs occurrence in STPs is scarce. Henceforth, this work evaluated the presence of MPs in sewage and sludge in a hybrid growth, secondary treatment-based STP system. Optical microscopy, scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy methods were used to examine the abundance of MPs in raw sewage, effluent from different treatment units of the STP, and sludge samples. A total number of MPs of 201 ± 19 (2021) and 197 ± 22 (2022) were detected in the studied STP system. Results showed that MPs ranged between 64.3 ± 4.89–47.66 ± 4.71 n/L (sewage) and 1.14 ± 0.30–1.38 ± 0.65 n/g (sludge) with the overall removal efficacy of the studied STP estimated to be around 80%. Fragments and fibers were predominant among all shapes and particles mostly belonged to sizes <50 μm and <50 μm–250 μm in sewage and sludge, respectively. In total, seven polymers were identified of which low-density polyethylene (LDPE) constituted the highest proportion in sewage (26%–31%) and polyvinyl chloride (PVC) contributed the highest in the sludge (22%–27%). Moreover, MPs control measures have been discussed based on the findings of this study to restrict MPs re-entry into the environment via treated effluent and sludge. [Display omitted] • First study on MPs occurrence and removal in a hybrid growth MBBR-based STP. • Around 80% MPs were removed via the primary and secondary treatment stages in the STP. • LDPE (in sewage) and PVC (in sludge) were the most prevalent polymers. • Small-sized MPs (<250 μm) like fragments and fibers were predominant shapes. • Advanced treatment options for MPs removal from secondary-treated effluent discussed. [ABSTRACT FROM AUTHOR]

Sewage sludge, generated post wastewater treatment, constitutes only a small percentage of the total amount of sewage treated, however, its sustainable management is inevitable. In this study, the energy recovery potential of sewage sludge by incineration and anaerobic digestion is investigated for India. The dewatered sludge has total solid content of 25–45% whereas, the primary characteristics of sewage sludge showed significant organic content of about ∼23–40% (dry basis). The calorific value was found to be 8–21 MJ/kg for sludge dry matter. The energy recovery potential of sewage sludge was 555–1068 kWh/tonne on sludge dry matter basis for incineration and 315–608 kWh/tonne for anaerobic digestion. Additionally, the energy recovery potential of current sewage treatment in India was found to be ∼15.3 × 105 or 8.6 × 105 MWh, annually for incineration and anaerobic digestion, respectively. The study had provided in depth view of sludge to be considered as energetic material and its energy recovery potential countrywide, which would not only help for give a proper direction for recovering energy but also helpful to deal with the issue of sludge management in India. Image 1 • Sludge generated from sewage treatment plants was explored for energy alternatives. • The sewage sludge contains high heating value, organic matter and volatile matter etc. • Energy recovery potential of sewage sludge produced in India was estimated. • The energy recovery from sewage sludge could reduce energy demands and reduce land requirement for its disposal as well. [ABSTRACT FROM AUTHOR]