Search

This study evaluates the environmental impacts associated with the conversion of garden organic waste into value-added products, namely compost or biochar, employing various processes. Three distinct scenarios are considered: composting garden organic waste followed by screening of oversized materials (CBP), pyrolysis of oversized screenings of compost into biochar AP(I), and in-situ conversion of garden organics into biochar AP(II). A comprehensive Life Cycle Assessment (LCA) was conducted using OpenLCA software and life cycle impact assessment was conducted using Recipe 2016 midpoint methodology. The environmental ramifications of each scenario were assessed, optimising transport distances in AP(II) to achieve a functional unit of one tonne of biochar produced within a cradle-to-gate system boundary. For the first time, this study offers a holistic exploration of the benefits of soil biochar application, extending its scope to climate change mitigation, incorporating the optimisation of transport distance and its influence when scaling up the technology. The results revealed that global warming was increased from 125 kgCO 2 eq during composting of garden waste to 232 kgCO 2 eq where oversized screenings of compost is converted to biochar at an off-site facility. However, direct conversion of the oversized organic waste to biochar, without composting, showed reduced global warming impact of 56 kgCO 2 eq, and is thus the most favourable scenario to limit climate impacts of this fraction of organic garden waste. However, among 18 environmental impact indicators studied, eight indicators were either not influenced or did not significantly increase by transport distance to an off-site pyrolysis facility, while the magnitude of 10 impact indicators increased with transport distance. The insights and methodologies presented in this study hold global relevance, based on an actual case study in regional Australia, offering valuable recommendations for sustainable waste management practices and establishing biochar as a carbon-neutral or carbon-negative solution. The findings contribute to existing waste management knowledge and provide guidance for accessible carbon dioxide removal and soil carbon sequestration technologies. [Display omitted] • A comprehensive LCA for valorisation of garden organics was conducted. • Direct conversion of garden organics to biochar showed least potential environmental impacts. • Biochar provides opportunities for avoided, reduced, and removed carbon from atmosphere. • Maximum transport distance has been identified for individual impact categories. [ABSTRACT FROM AUTHOR]

Developing non-grain forestry woody fuel industries such as Jatropha curcas L. (JCL) aligns with the national conditions of countries with food shortages and large populations, such as some countries in Africa and Asia, and is an ideal alternative to replace fossil fuels. Determining appropriate planting densities suitable for different regions is one of the most critical practices for agriculture and forestry to achieve high yields and sustainability. This study conducted a life cycle assessment (LCA) of the JCL biodiesel's environmental impact, energy balance, and economic analysis (3E) of two densities and three of the most suitable planting regions in China. Findings reveal that the density of 2500 plants/ha had a better 3E performance than 1600 plants/ha, and Yunnan province outperformed Guizhou province and Sichuan province. JCL biodiesel effectively mitigates the greenhouse effect (1141.14–1936.59 kg CO 2 eq/t) compared to conventional fossil diesel in different cases. Key factors influencing environmental performance include seed yield, urea applied during cultivation, methanol for biodiesel conversion, and electricity for irrigation. The Net Energy Balance (NEB) and Net Energy Ratio (NER) demonstrate the superior energy efficiency of JCL biodiesel over fossil diesel. The cost of producing JCL biodiesel decreased with the maturation of the trees, with water use and labor salary accounting for over 80% due to the necessity of the cultivation stage. Although the Financial Net Present Value (FNPV) was negative when considering only JCL biodiesel, it became positive (12111.64–27342.44 CNY) with the inclusion of by-products (glycerine, press-cake, and shells) in high-density cases. Our findings suggest that JCL biodiesel with appropriate density can serve as a sustainable biofuel alternative, replacing a portion of the fossil diesel currently on the market and significantly contributing to climate change mitigation and nonrenewable energy conservation. [Display omitted] • A comprehensive cradle-to-gate LCA of Jatropha curcas L. biodiesel of two densities × three regions was assessed. • Planting density was an important factor influencing the environmental, energy, and economic performance of Jatropha curcas L. • Jatropha curcas L. biodiesel reduced GHG emissions and saved energy compared to fossil diesel. • Emissions from fertilizers, energy consumption from electricity, and the cost of labor contributed the most to 3E of Jatropha curcas L. biodiesel. [ABSTRACT FROM AUTHOR]

Bioenergy with carbon capture and storage (BECCS) is regarded as a crucial negative emission technology (NET) in many prospective climate change mitigation scenarios that limit global warming below 2 °C. However, there is still insufficient understanding of the overall life cycle environmental performance of different BECCS configurations. Despite the fact that BECCS entails many technological combinations, the technology is still regarded as a single "black box" technology in most climate scenarios. This study presents a critical review of life cycle assessment (LCA) on a wide range of BECCS options: biomass direct-fired power generation, biomass gasification power generation, bio-hydrogen production, biomass application in industry sectors and other biomass conversion processes, such as pyrolysis and fermentation. It is evident from the review that the biomass direct-fired and gasification power plant with a 100% biomass firing ratio and the gasification-based bio-hydrogen processes have a strong potential to achieve negative emissions. However, the net negative life cycle emissions range widely among studies for each configuration due to variations in technology, LCA methodology and assumptions. Additionally, there is an insufficient assessment of comprehensive environmental impacts for BECCS systems other than GWP, making it still unclear about the trade-offs between the benefit from climate change mitigation and potential negative impacts. Main recommendations for improving LCA on BECCS include developing a generalized guideline and standardization for BECCS LCA, conducting LCAs with comprehensive impact categories, focusing on BECCS configurations being overlooked, considering the impact of land use change and the global warming potential of biomass, and extending LCA in both temporal and spatial dimension. [Display omitted] • Systematically review of life cycle assessment on BECCS systems. • Detailed review on various biomass conversion technologies. • Net negative life cycle emissions range widely among studies. • Insufficient studies of some biomass conversion pathways. • Insufficient studies on multi-environmental environment impact categories. [ABSTRACT FROM AUTHOR]

With emphasis on constructing low-carbon cities, the renovation of old communities highlights the importance of renewing rainwater management facilities. Rain garden is an exceptional Nature-based Solution for rainwater management. When applying them to renovate old communities, the carbon footprint should be considered. This study focused on renovating facilities in the Greater Bay Area and utilized the Energy Expert platform to calculate rain garden carbon footprint with the Life Cycle Assessment. The carbon reduction benefits during the operation were estimated. This study accounting the life cycle carbon footprint of the 5455 m2 rain garden was 1117.42 tCO 2 e. The carbon footprint contribution, from highest to lowest was the end-of-life phase, materials production phase, construction phase, use and maintenance phase. Regarding carbon emission inventory, waste soil landfill, fertilizer acquisition, and waste soil recycling ranked high. Transportation also accounted for a remarkable carbon emission. The rain garden showed great potential for climate change mitigation, with a total and net carbon reduction of 1927.41 and 809.99 tCO 2 e, respectively. To reduce the carbon footprint of the rain garden, we should focus on waste soil treatment and transportation. Recommendations included increasing waste soil recycling, in situ recycling and green transportation. [ABSTRACT FROM AUTHOR]

Plastics account for 4.5% of global greenhouse gas (GHG) emissions, which are hard-to-abate due to the use of fossil fuels as feedstock. Our study develops a cradle-to-gate life cycle assessment of bioethylene production, exploring 33 pathways across Brazil, the EU, and the US. It aims to understand whether substituting fossil-based ethylene with bioethylene contributes to lowering carbon emissions, and in which of the relevant bioenergy-producing regions/countries the valorisation of biofuels as feedstocks would provide a less carbon-intensive bioethylene production. Results indicate that bioethylene production through catalytic dehydration of sugarcane bioethanol in Brazil presents lowest GHG emission. This pathway could deliver up to −2.1 kg CO 2 e/kg ethylene when accounting for biogenic carbon storage in long-lived applications such as infrastructure. In contrast, beef tallow performs the poorest as a raw material, regardless of whether land-use change (LUC) emissions are considered. When biogenic carbon storage is factored out, none of the pathways outperforms conventional fossil-based steam cracking; however, some are within the fossil-based range indicating potential indirect benefits through reduced refinery utilisation. Our study underscores that biomaterials production as a climate mitigation strategy must be on par with circular economy measures and the conservation of native forestry ecosystems. These results are particularly relevant to policymakers and industries seeking to align polymer manufacturing with sustainability objectives. • Bio-ethylene cradle-to-gate GHG emissions were assessed for 33 pathways. • Sugary, starch, lignocellulosic and oily crops are raw materials for bio-ethylene. • Local specificities such as biogenic carbon storage and land-use are critical to LCA GHG emissions. • Sugarcane bioethanol dehydration route yielded 2.1 kgCO 2 e captured per of kg ethylene. • Climate mitigation and circular economy policies must be designed coherently. [ABSTRACT FROM AUTHOR]

Anthropogenic greenhouse gas emissions (GHGE) are behind climate change. In Chile, food system is the second source of GHGE. Changing Chileans dietary patterns is key to reducing such emissions. There is geographic variability in terms of dietary patterns within the country. Here we investigated the dietary GHGE in five different geographical zones, along with the main contributing food groups and socio-demographic variables. Data for 4676 individuals were obtained from the 2010–2011 National Survey of Food Consumption. The carbon footprint value of each food was obtained from studies using life cycle assessment methodology. Median and percentiles of dietary GHGE were calculated, expressed in kilograms of carbon dioxide equivalent per person per day (kgCO 2 eq/person/d) and compared among zones by Kruskal-Wallis and Dunn's tests. Logistic regression models were fitted to analyzed associations among the variables of interest and quartiles of GHGE. Diet-related GHGE ranged from 3.50 (2.34–5.12) in the North-Central Zone to 4.66 (2.89–6.69) kgCO 2 eq/person/d in the South zone. Meat accounted for 53–58% of the GHGE in all the zones, followed by dairy products with 12–13%. Higher GHGE were significantly associated with energy intake (kcal/d) in all of the zones, with high socioeconomic level in the North-Central, South and Metropolitan zones, and with urban residence in the South-Central zone. Tailored policies considering geographic variability are warranted to promote healthy and sustainable diets among the Chilean population. • Differences in dietary greenhouse gas emissions were determined among five Chilean geographical zones. • South and Metropolitan region showed the highest GHGE while North showed the lowest. • Meat and dairy were the most contributing foods in all zones. • GHGE were positively associated with energy intake in all zones & with high socioeconomic level in three zones. • The promotion of sustainable diets in Chile must consider the geographical specificities. [ABSTRACT FROM AUTHOR]

Lithium-ion batteries (LIBs) play a crucial role in driving energy transitions, particularly in electric vehicles (EVs) and energy storage systems. Forecasting LIB prices has received significant attention due to the tightening of raw material markets. Additionally, the implementation of carbon pricing policies has highlighted the need to incorporate the carbon footprint of LIBs in price evaluation. This study presents a comprehensive analysis of the carbon footprint, pricing trajectories, and forthcoming carbon pricing ramifications associated with LIBs. Firstly, the findings derived from the life-cycle carbon footprint assessment indicate that the global production volume-weighted average carbon footprint of EV battery packs spans 49.2–81.1 kgCO 2 eq/kWh, depending on the chosen end-of-life treatment. Strategic end-of-life selections, aligned with battery chemical composition, can diminish the carbon footprint by up to 46% relative to improper disposal methods. Notably, direct cathode recycling of NCA and NMC622 batteries exhibits superior environmental performance. Secondly, techno-economic analysis predicts that the mean price of EV battery packs with diverse chemical compositions will decline to $75.1/kWh by 2030, factoring in the compound annual growth rate of critical raw material prices over the past decade. LFP batteries emerge as the top economic performers. Lastly, the results reveal that monetizing a battery's carbon footprint may offset battery price reductions through learning effects. This underscores the imperative of effective recycling for curtailing the carbon footprint and ensuring the enduring economic and environmental competitiveness of LIBs. • Life-cycle carbon emissions are integrated into future battery price projections. • Direct cathode recycling provides the greatest potential for carbon reduction. • LFP might be the only lithium-ion battery to achieve the $80/kWh price target. • Cost reductions from learning effects can hardly offset rising carbon prices. • Recycling is needed for climate change mitigation and battery economics. [ABSTRACT FROM AUTHOR]

Generation of goods and services are highly dependent on the use of natural resources. Until very recently, there was an implicit belief that the physical expansion of the economic system could be unlimited, as if the planet would have conditions and time enough to recover and continue to supply resources. This belief implies a confidence in an economic system that would provide whatever is necessary for a continuous growing production and consumption. Even believing that technology alone is not enough to solve the current environmental problems, it is certain that it can collaborate to mitigate climate change and to adaptation to changes in the environment. By bringing environmental aspects into discussions, eco-innovations can affect and transform the innovation system in order to create sustainable processes. However, the main challenge towards the transition to a more sustainable, cleaner and more equitable society is to set innovation in a new context, as until very recently it only considered the economic variables. This change means to value the social and environmental dimension of the innovation. In addition to eco-innovation, Life Cycle Assessment (LCA) is spreading in the industrial environment, offering promising perspectives. LCA is considered a valuable methodology in the environmental sustainability of industry. In this context, the present study addresses LCA and its relationship with the generation of eco-innovations. Drawing on contributions from literature on eco-innovation and LCA, the paper analyses available evidence on this relationship in a context of the transition towards sustainable development. To structure the debate, the paper offers a conceptual approach and an illustrative case on international researchers' and practitioners’ perceptions on the potentially positive relationship between eco-innovation and LCA. The study gathers data in the Web of Science (WoS) Core Collection and in Scopus, in order to provide a picture of the distribution of documents retrieved from these databases, dealing with both eco-innovation and LCA topics. The paper concludes that the convergence of the eco-innovation and LCA studies is quite plausible, but at least in its initial phase, the literature that unites both themes is scarcely found in publications in the area of innovation, being more frequent in the area of engineering and management that usually addresses LCA studies. [ABSTRACT FROM AUTHOR]

Wood and other bio-based building materials are often perceived as a good choice from a climate mitigation perspective. This article compares the life cycle assessment of the same multi-residential building from the perspective of 16 countries participating in the international project Annex 72 of the International Energy Agency to determine the effects of different datasets and methods of accounting for biogenic carbon in wood construction. Three assessment methods are herein considered: two recognized in the standards (the so-called 0/0 method and −1/+1 method) and a variation of the latter (−1/+1* method) used in Australia, Canada, France, and New Zealand. The 0/0 method considers neither fixation in the production stage nor releases of biogenic carbon at the end of a wood product's life. In contrast, the −1/+1 method accounts for the fixation of biogenic carbon in the production stage and its release in the end-of-life stage, irrespective of the disposal scenario (recycling, incineration or landfill). The −1/+1 method assumes that landfills offer only a temporary sequestration of carbon. In the −1/+1* variation, landfills and recycling are considered a partly permanent sequestration of biogenic carbon and thus fewer emissions are accounted for in the end-of-life stage. We examine the variability of the calculated life cycle-based greenhouse gas emissions calculated for a case study building by each participating country, within the same assessment method and across the methods. The results vary substantially. The main reasons for deviations are whether or not landfills and recycling are considered a partly permanent sequestration of biogenic carbon and a mismatch in the biogenic carbon balance. Our findings support the need for further research and to develop practical guidelines to harmonize life cycle assessment methods of buildings with bio-based materials. [Display omitted] • Life cycle assessments of the same multi-residential building were carried out by experts from 16 countries. • Effects of methods and datasets of biogenic carbon accounting in wood construction were identified. • Different end-of-life scenarios (incineration, landfill, recycling) cause variations in the results. • Different interpretations of the permanence of storing biogenic carbon in landfills also cause variations in the results. • The input and output flows of biogenic carbon must be balanced to correctly assess its climate change impacts. [ABSTRACT FROM AUTHOR]

Increasing demand for land-based climate mitigation requires more efficient management of agricultural landscapes for competing objectives. Here we develop methods for assessing trade-offs and synergies between intensification and carbon-sequestering conservation measures in annual crop production landscapes using the DayCent ecosystem model and the Greenhouse Gases, Regulated Emissions, and Energy Use in Technologies (GREET) life-cycle assessment (LCA) model. We compiled county-scaled crop yields, fertilizer application rates, and tillage intensity for a corn–soybean farming case study landscape in the US state of Iowa. Using DayCent, we estimated a baseline soil organic carbon (SOC) accrual rate of 0.29 Mg C ha−1 y−1 driven by historical increases in crop productivity and reductions in tillage intensity. We then simulated the effects of management interventions targeted toward intensification (stover removal) and SOC sequestration (tillage intensity reduction and winter cover crop addition) individually and in combination. We propose a new multi-product landscape–LCA approach that analyzes marginal changes in corn grain, corn stover, and soybean production from the landscape in terms of their value for biofuel production (corn ethanol, soy biodiesel, and cellulosic ethanol from stover) and associated net displacement of conventional fossil-derived fuel use. This enables us to evaluate both intensification and sequestration effects in common CO 2 -equivalent mitigation units. We also used DayCent-simulated yields under the different land management scenarios to estimate farm-level costs and revenues. Our results show that intensification via collecting 30% of corn stover for biofuel production would increase the total greenhouse gas (GHG) mitigation potential of this landscape by 0.93 Mg CO 2 e ha−1 y−1 and provide $49 ha−1 y−1 of additional net revenue from biomass sales, but would reduce the baseline SOC accumulation rate by approximately 40%. In contrast, integrated approaches that include co-adoption of winter cover cropping and/or tillage intensity reduction would result in increased rates of SOC accumulation above the baseline, achieving simultaneous improvements in both farm profits and the overall GHG mitigation potential of the landscape. • Our LCA method compares intensification and carbon sequestration in agro-ecosystems. • Fine-scale management data benefits soil carbon modeling in corn–soy landscapes. • Harvesting corn stover increases carbon mitigation in a US Midwest study landscape. • Coadoption of natural solutions with stover harvest optimizes carbon and revenue. • This landscape assessment can inform local landowner and government decision-making. [ABSTRACT FROM AUTHOR]

The ever-increasing anthropogenic greenhouse gas (GHG) emissions worldwide make it quite challenging to meet country-specific Nationally Determined Contributions (NDC) targets. Therefore, it is evident that the existing emissions abatement measures need to be taken a step further. Internationally Transferred Mitigation Outcomes (ITMOs) are allowed in Article 6.2 of the Paris Agreement as a cooperative approach to achieving NDC goals. There is a potential to create ITMOs between Canada and China by replacing coal use in China with British Columbia (BC)'s liquefied natural gas (LNG) supply. Replacing coal with LNG in energy generation applications is a promising approach to mitigate emissions. With global and national pressures to reduce emissions, China has created a market for LNG imports to cater to its rising natural gas (NG) consumption due to the coal-to-gas source switching strategy. However, the terms under Article 6.2 requires generated ITMOs to ensure environmental integrity, support sustainable development goals, and have a robust accounting system. Therefore, the current study aims to quantify the life cycle environmental outcomes of generating ITMOs by exporting LNG from BC to Chinese end-users while integrating uncertainties and to provide policy recommendations in adherence with the requirements of Article 6.2. Different LNG export scenarios were generated in the study and environmental impacts of each scenario were assessed and compared using a life cycle assessment (LCA) framework developed by the authors. Sensitivity and uncertainty analyses were conducted to understand the impacts created by the data uncertainties in the final result. By replacing conventional coal with NG, approximately 40–45% and 26%–32% emissions reductions can be obtainable for Chinese textile and chemical industries, respectively. The highest emissions reduction of approximately 60% was observed when coal is replaced with NG for district heating. The life cycle emissions (LCE) quantification framework provided in the study provides stakeholders with a systematic approach to determine the total GHG emissions and emissions reduction potential of different LNG export scenarios. [ABSTRACT FROM AUTHOR]