Search

As a key component in mitigating global warming and achieving sustainable development strategies, wind power has received widespread attention and support from governments around the world. Numerous countries are engineering ambitious programs to map and project the mitigation potential of wind energy expansion to combat future global warming. Here, using the global installed wind capacity data, we identity that a total of 837 GW of wind energy installed capacity (WEIC) in 31 countries generated about 2186 TWh of electricity, that is 1311 Mt of CO 2 mitigation, in 2021. Considering power mix transformation, wind power could account for more than 30% of total global electricity generation by the mid-21st century, when many countries expect to realize carbon neutrality, and could reduce CO 2 emission up to 14871 Mt by 2050 and 32864 Mt by 2100. Meanwhile, the global phenomenon of the future southward shift of wind energy resources makes the wind energy development in low-latitude countries, such as Brazil, Vietnam, and Central African, more confident. Combined with the Shared Socio-economic Pathways (SSPs), we find that the mitigation benefits of wind energy expansion are significant and will directly reduce global warming by up to 0.64 °C by the end of the century (NZE deployment scenario, SSP3-7.0). For China and the United States, the share of renewable energy will reach 78% and 84% by 2050 (APS scenario) and the cumulative climate mitigation by wind power will be 0.12 °C and 0.11 °C during 2020–2100, respectively. The findings strongly support the development and practice of global climate mitigation energy solutions. • This study quantifies wind energy's impact on CO 2 and temperatures reduction. • Global wind energy can currently mitigate 1311 Mt CO 2 , up to 32864 Mt by 2100. • Wind energy expansion could mitigate global warming by up to 0.64 °C in 2100. • China and the U.S. lead global CO 2 reductions in wind power. [ABSTRACT FROM AUTHOR]

CO 2 emissions from global steel production may jeopardize climate goals of 1.5 °C unless current steel production practices will be rapidly decarbonized. At present, primary iron and steel production is still heavily dependent on fossil fuels, primarily coke. This study aims to determine which decarbonization pathways can achieve the strongest emission reductions of the iron and steel industry in Germany by 2050. Moreover, we estimate whether the German iron and steel industry will be able to stay within its sectoral carbon budgets for a 1.5 °C or 1.75 °C target. We developed three decarbonization scenarios for German steel production: an electrification, coal-exit, and a carbon capture and storage (CCS) scenario. They describe a phase-out of coal-fired production plants and an introduction of electricity-based, low-carbon iron production technologies, i.e. hydrogen-based direct reduction and electrowinning of iron ore. The scenarios consider the age and lifetimes of existing coal-based furnaces, the maturity of emerging technologies, and increasing recycling shares. Based on specific energy requirements and reaction-related emissions per technology, we calculated future CO 2 emissions of future steel production in Germany. We found that under the decarbonization scenarios, annual CO 2 emissions decrease by up to 83% in 2050 relative to 2020. The reductions of cumulative emissions by 2050 range from 24% (360 Mt CO 2) under the electrification scenario up to the maximum of 46% (677 Mt CO 2) under the CCS scenario compared to a reference scenario. This clearly demonstrates that the technology pathway matters. Nevertheless, the German steel sector will exceed its sectoral CO 2 budget for a 1.5 °C warming scenario between 2023 and 2037. Thus, drastic measures are required very soon to sufficiently limit future CO 2 emissions from German steel production, such as, a rapid decarbonization of the electricity mix, the construction of a hydrogen and CCS infrastructure, or early shutdowns of current coal-based furnaces. [Display omitted] • Scenarios for iron and steel production in Germany until 2050 • Adopting new technologies: hydrogen-based direct reduction and electrowinning • Comparison of CO 2 emissions with sectoral carbon budgets for the steel industry • Carbon budget for climate goal of 1.5 °C likely to be exceeded between 2023 and 2037 • Carbon capture scenario achieves lowest CO 2 emissions but has higher energy demand [ABSTRACT FROM AUTHOR]

Decarbonization is a process that transforms economies to lower greenhouse gas (GHG) emissions per unit of economic output, aiming towards net-zero GHG emissions. This process could also reduce short-lived climate pollutant (SLCP) emissions, including black carbon and methane. They have relatively short atmospheric lifetimes but have large radiative forcing and impact human health. Therefore, reducing SLCPs can improve air pollution and help mitigate climate change. Costa Rica was one of the first countries to have a decarbonization plan, and many others have stated their goal to reach net-zero emissions by around mid-century. However, reducing SLCP emissions as an economy decarbonizes is not guaranteed, and few examples in the literature have assessed how decarbonization impacts SLCPs. This paper estimates the SLCP emission reductions from Costa Rica's decarbonization plan. Through a value chain analysis and the identification of implementation barriers, the paper also evaluates which policy instruments can advance SLCP mitigation in multiple sectors, creating implementation synergy. We find that mitigation measures, by 2050, in the transport, agricultural, solid waste, and industrial sectors avoid 25.2 kt of black carbon emissions (23 times the 2018 emissions) and 2167 kt of methane (15 times the 2018 emissions). However, the country faces financial and governance challenges in each sector that will need overcoming to implement the intended mitigation measures. We identify a comprehensive environmental tax reform, the overhauling of urban regulatory plans, the strengthening of institutional capabilities, and low-carbon investment with favorable financing as crucial cross-sectoral policy synergies that will advance the implementation of SLCP mitigation. • Decarbonizing can reduce and avoid short-lived climate pollutant (SLCP) emissions. • Black carbon and methane (two SLCPs) cause global warming and poor air quality. • Some policy instruments can reduce SLCPs in multiple sectors, causing synergy. • Improved urban planning can favor the mitigation in transport and waste sectors. • Institutional strength and favorable financing are needed to advance mitigation. [ABSTRACT FROM AUTHOR]

CO 2 emissions from global steel production may jeopardize climate goals of 1.5 °C unless current steel production practices will be rapidly decarbonized. At present, primary iron and steel production is still heavily dependent on fossil fuels, primarily coke. This study aims to determine which decarbonization pathways can achieve the strongest emission reductions of the iron and steel industry in Germany by 2050. Moreover, we estimate whether the German iron and steel industry will be able to stay within its sectoral carbon budgets for a 1.5 °C or 1.75 °C target. We developed three decarbonization scenarios for German steel production: an electrification, coal-exit, and a carbon capture and storage (CCS) scenario. They describe a phase-out of coal-fired production plants and an introduction of electricity-based, low-carbon iron production technologies, i.e. hydrogen-based direct reduction and electrowinning of iron ore. The scenarios consider the age and lifetimes of existing coal-based furnaces, the maturity of emerging technologies, and increasing recycling shares. Based on specific energy requirements and reaction-related emissions per technology, we calculated future CO 2 emissions of future steel production in Germany. We found that under the decarbonization scenarios, annual CO 2 emissions decrease by up to 83% in 2050 relative to 2020. The reductions of cumulative emissions by 2050 range from 24% (360 Mt CO 2) under the electrification scenario up to the maximum of 46% (677 Mt CO 2) under the CCS scenario compared to a reference scenario. This clearly demonstrates that the technology pathway matters. Nevertheless, the German steel sector will exceed its sectoral CO 2 budget for a 1.5 °C warming scenario between 2023 and 2037. Thus, drastic measures are required very soon to sufficiently limit future CO 2 emissions from German steel production, such as, a rapid decarbonization of the electricity mix, the construction of a hydrogen and CCS infrastructure, or early shutdowns of current coal-based furnaces. [Display omitted] • Scenarios for iron and steel production in Germany until 2050 • Adopting new technologies: hydrogen-based direct reduction and electrowinning • Comparison of CO 2 emissions with sectoral carbon budgets for the steel industry • Carbon budget for climate goal of 1.5 °C likely to be exceeded between 2023 and 2037 • Carbon capture scenario achieves lowest CO 2 emissions but has higher energy demand [ABSTRACT FROM AUTHOR]

Decarbonization is a process that transforms economies to lower greenhouse gas (GHG) emissions per unit of economic output, aiming towards net-zero GHG emissions. This process could also reduce short-lived climate pollutant (SLCP) emissions, including black carbon and methane. They have relatively short atmospheric lifetimes but have large radiative forcing and impact human health. Therefore, reducing SLCPs can improve air pollution and help mitigate climate change. Costa Rica was one of the first countries to have a decarbonization plan, and many others have stated their goal to reach net-zero emissions by around mid-century. However, reducing SLCP emissions as an economy decarbonizes is not guaranteed, and few examples in the literature have assessed how decarbonization impacts SLCPs. This paper estimates the SLCP emission reductions from Costa Rica's decarbonization plan. Through a value chain analysis and the identification of implementation barriers, the paper also evaluates which policy instruments can advance SLCP mitigation in multiple sectors, creating implementation synergy. We find that mitigation measures, by 2050, in the transport, agricultural, solid waste, and industrial sectors avoid 25.2 kt of black carbon emissions (23 times the 2018 emissions) and 2167 kt of methane (15 times the 2018 emissions). However, the country faces financial and governance challenges in each sector that will need overcoming to implement the intended mitigation measures. We identify a comprehensive environmental tax reform, the overhauling of urban regulatory plans, the strengthening of institutional capabilities, and low-carbon investment with favorable financing as crucial cross-sectoral policy synergies that will advance the implementation of SLCP mitigation. • Decarbonizing can reduce and avoid short-lived climate pollutant (SLCP) emissions. • Black carbon and methane (two SLCPs) cause global warming and poor air quality. • Some policy instruments can reduce SLCPs in multiple sectors, causing synergy. • Improved urban planning can favor the mitigation in transport and waste sectors. • Institutional strength and favorable financing are needed to advance mitigation. [ABSTRACT FROM AUTHOR]

This study contributed to the environmental research by analyzing the nexus between innovation in climate change mitigation technologies and carbon dioxide emissions in the United States, with the gross domestic product per capita, international collaboration in green technology development, renewable energy consumption, the labor force, and trade openness as control variables from 1990Q1 to 2018Q4. First, the results suggested that renewable energy consumption, innovation in climate change mitigation technologies, and international collaboration in green technology development are significant mitigating and determining factors for carbon dioxide emissions. Second, the findings also indicated that trade openness and gross domestic product per capita were positively associated with carbon dioxide emissions. Third, the Granger causality test results validated the presence of a bidirectional nexus between innovation in climate change mitigation technologies and carbon dioxide emissions, renewable energy consumption and carbon dioxide emissions, and international collaboration in green technology development and carbon dioxide emissions. Fourth, the results validated a one-way causality between gross domestic product per capita and carbon dioxide emissions. [ABSTRACT FROM AUTHOR]

The world needs to rapidly reduce emissions of carbon dioxide (CO 2) emission to stave off the risks of disastrous climate change. In particular, decarbonizing U.S. manufacturing industries is particularly challenging due to the specific process requirements. This study estimates the potential for future CO 2 emission reductions in this important sector. The analysis is a detailed accounting exercise that relies on estimates of emission-reduction potential from other studies and applies those potentials to the manufacturing sector using a bottom-up approach. The actions are grouped into four "pillars" that support deep decarbonization of manufacturing (DDM): Energy Efficiency, Material Efficiency, Industry-Specific, and Power Grid. Based on this bottom-up approach, the analysis shows that an 86% reduction in carbon dioxide emissions from the Reference Case is feasible. No single pillar dominates DDM, although opportunities vary widely by sub-sector. The analysis shows that a strategy incorporating a broad set of elements from each pillar can be effective instead of relying on any single pillar. Some pillars, such as Energy Efficiency and Material Efficiency, have wide applicability; others have key niche roles that are Industry-Specific; the Power Grid pillar requires interaction between grid decarbonization and industry action to switch from fossil fuels to zero-carbon electricity where appropriate. [Display omitted] • Four technological strategies ("pillars") for deep decarbonization of U.S. manufacturing are investigated. • Seven energy-intensive and one non-energy-intensive industries are examined separately. • An 86% reduction in energy related CO 2 emissions is feasible in U.S. manufacturing by 2050. • No single pillar dominates implying a diversified approach to decarbonization is needed. • Some emissions remain in select industries, in particular chemicals. [ABSTRACT FROM AUTHOR]