Search

Identifying transmission sectors that may not be revealed by existing indicators, such as production-based emission (PBE) and consumption-based emission (CBE) accounting, is significant in emission reduction policies and provides insights into novel opportunities for companies and industries to reduce emissions. This study proposed an intermediate-based emission (IBE) accounting approach that considers indirect emissions from intermediate goods production and a case study was conducted using Exiobase 3.8. The highest IBE sector was 'basic iron' (1131 Mt-CO 2), and the sector's IBE was higher than its PBE (1052 Mt-CO 2). Additionally, the material sector, such as aluminum products (326 Mt-CO 2), was identified as a key transmission sector, although PBE (21 Mt-CO 2) and CBE (3 Mt-CO 2) of the sector is very low. In addition, IBEs were observed to be closely related to overall supply chain emissions in Germany, Japan, and Asia, and cooperation is required to reduce the emissions. The method enables approaching supply chains with large emissions from three perspectives (production-, consumption-, and intermediate-based accounting) and exploration of the emission reduction responsibilities of the three key sectors. The utility and discussion of the approach are consistent with Scope 3 emissions and facilitate fair allocation of emission reduction responsibilities to a larger number of countries and industries. • This study suggested intermediate-based emission (IBE) accounting. • Industries such as basic iron have high production–based emissions but higher IBE. • Intermediate industries not focused on by existing emission accounting identified. • Existing betweenness-based emission accounting much higher than actual emissions. • Germany, Japan, and Asian HEMs have strong correlation with IBE. [ABSTRACT FROM AUTHOR]

In the context of climate change mitigation and sustainable energy infrastructure development, this paper focuses on the successful implementation of microgrids supplied by renewable energies in very diverse environments. Taking into account the challenges of reaching economies of scale, this paper is targeted at identifying success factors for microgrid implementation. The success factors are derived from case study analyses of microgrids implemented in the Global South and in communities of Germany. The goal of the research is to develop a mutual understanding of common values and so support future developments. The analysis covers the categories of ownership and participation; technology and system design; and policy and financing. The results show that microgrids in the Global South and renewable-energy-based communities in Germany share a number of success factors. The results demonstrate that a high share of ownership by users and the flexibility to expand the microgrid with user needs are particularly promising features. To verify the application of the identified success factors, the latter are applied to analyze the microgrid concept of “swarm electrification”. The analysis concludes that the concept of swarm electrification is consistent with the success factors, making it a high-potential approach for renewable-energy-based electrification. [ABSTRACT FROM AUTHOR]

CO 2 emissions from global steel production may jeopardize climate goals of 1.5 °C unless current steel production practices will be rapidly decarbonized. At present, primary iron and steel production is still heavily dependent on fossil fuels, primarily coke. This study aims to determine which decarbonization pathways can achieve the strongest emission reductions of the iron and steel industry in Germany by 2050. Moreover, we estimate whether the German iron and steel industry will be able to stay within its sectoral carbon budgets for a 1.5 °C or 1.75 °C target. We developed three decarbonization scenarios for German steel production: an electrification, coal-exit, and a carbon capture and storage (CCS) scenario. They describe a phase-out of coal-fired production plants and an introduction of electricity-based, low-carbon iron production technologies, i.e. hydrogen-based direct reduction and electrowinning of iron ore. The scenarios consider the age and lifetimes of existing coal-based furnaces, the maturity of emerging technologies, and increasing recycling shares. Based on specific energy requirements and reaction-related emissions per technology, we calculated future CO 2 emissions of future steel production in Germany. We found that under the decarbonization scenarios, annual CO 2 emissions decrease by up to 83% in 2050 relative to 2020. The reductions of cumulative emissions by 2050 range from 24% (360 Mt CO 2) under the electrification scenario up to the maximum of 46% (677 Mt CO 2) under the CCS scenario compared to a reference scenario. This clearly demonstrates that the technology pathway matters. Nevertheless, the German steel sector will exceed its sectoral CO 2 budget for a 1.5 °C warming scenario between 2023 and 2037. Thus, drastic measures are required very soon to sufficiently limit future CO 2 emissions from German steel production, such as, a rapid decarbonization of the electricity mix, the construction of a hydrogen and CCS infrastructure, or early shutdowns of current coal-based furnaces. [Display omitted] • Scenarios for iron and steel production in Germany until 2050 • Adopting new technologies: hydrogen-based direct reduction and electrowinning • Comparison of CO 2 emissions with sectoral carbon budgets for the steel industry • Carbon budget for climate goal of 1.5 °C likely to be exceeded between 2023 and 2037 • Carbon capture scenario achieves lowest CO 2 emissions but has higher energy demand [ABSTRACT FROM AUTHOR]

CO 2 emissions from global steel production may jeopardize climate goals of 1.5 °C unless current steel production practices will be rapidly decarbonized. At present, primary iron and steel production is still heavily dependent on fossil fuels, primarily coke. This study aims to determine which decarbonization pathways can achieve the strongest emission reductions of the iron and steel industry in Germany by 2050. Moreover, we estimate whether the German iron and steel industry will be able to stay within its sectoral carbon budgets for a 1.5 °C or 1.75 °C target. We developed three decarbonization scenarios for German steel production: an electrification, coal-exit, and a carbon capture and storage (CCS) scenario. They describe a phase-out of coal-fired production plants and an introduction of electricity-based, low-carbon iron production technologies, i.e. hydrogen-based direct reduction and electrowinning of iron ore. The scenarios consider the age and lifetimes of existing coal-based furnaces, the maturity of emerging technologies, and increasing recycling shares. Based on specific energy requirements and reaction-related emissions per technology, we calculated future CO 2 emissions of future steel production in Germany. We found that under the decarbonization scenarios, annual CO 2 emissions decrease by up to 83% in 2050 relative to 2020. The reductions of cumulative emissions by 2050 range from 24% (360 Mt CO 2) under the electrification scenario up to the maximum of 46% (677 Mt CO 2) under the CCS scenario compared to a reference scenario. This clearly demonstrates that the technology pathway matters. Nevertheless, the German steel sector will exceed its sectoral CO 2 budget for a 1.5 °C warming scenario between 2023 and 2037. Thus, drastic measures are required very soon to sufficiently limit future CO 2 emissions from German steel production, such as, a rapid decarbonization of the electricity mix, the construction of a hydrogen and CCS infrastructure, or early shutdowns of current coal-based furnaces. [Display omitted] • Scenarios for iron and steel production in Germany until 2050 • Adopting new technologies: hydrogen-based direct reduction and electrowinning • Comparison of CO 2 emissions with sectoral carbon budgets for the steel industry • Carbon budget for climate goal of 1.5 °C likely to be exceeded between 2023 and 2037 • Carbon capture scenario achieves lowest CO 2 emissions but has higher energy demand [ABSTRACT FROM AUTHOR]

Crop breeding has boosted global agricultural productivity over recent decades, but little is known about its contribution to climate change mitigation. Here we assess greenhouse gas emissions per unit land (GHGL) and greenhouse gas emissions per unit harvest product, i.e. carbon footprint (CFP) of winter wheat (Triticum aestivum) and winter rye (Secale cereale) from official German variety trials in the period 1983 to 2019. We assess the life cycle greenhouse gas (GHG) emissions and analyze the data using mixed effects models. We find that breeding progress led to slightly increased GHGL , amounting to ∼4–10%, but to strongly decreasing CFP, amounting to ∼13–23% in wheat and rye since 1983. With a ∼20% lower GHGL and ∼8% lower CFP in rye compared to wheat, the extension of rye production offers viable climate change mitigation potential. Finally, we find that lower CFP are associated with hybrid breeding, chemical plant protection and larger farms. We conclude that with increasing global food demand and limited cropland, breeding progress contributes considerably to climate change mitigation through reduced CFP. • First evidence on the contribution of breeding progress to climate change mitigation. • 27,652 and 10,523 Genotype x Environment x Management-combinations of wheat and rye. • Rye has lower greenhouse gas emissions (∼20%) and carbon footprint (∼8%) than wheat. • Crop breeding decreased carbon footprint in wheat and rye by ∼13–23% since 1983/1985. [ABSTRACT FROM AUTHOR]

Many studies have analysed the environmental impact of vegan, vegetarian, or reduced meat diets. To date, literature has not evaluated how diet shifts affect environmental impacts by utilising portfolios which reflect personal nutrition preferences. Further, changing diets could alter the available land for non-food uses. This paper defines novel diet portfolios to outline alternative diet transitions and choices within the population and finds their effect on greenhouse gas (GHG) emissions, primary energy use, and land use in Germany. The aim of this study is to capture how these diet shifts affect land availability and increase the options for land-based climate change mitigation strategies. To do so, a contextualisation is made to compare the use of freed-up land for afforestation or biomethane production (with and without carbon capture and storage). The investigated diet portfolios lead to a reduction of the investigated impacts (GHG emissions: 7–67%; energy use: 5–46%; land use: 6–64%). Additionally, afforestation of freed-up land from each diet portfolio leads to further emission removals of 4–37%. In comparison, using the land to produce energy crops for biomethane production could lead to 2–23% further CO2-eq emission reductions when replacing fossil methane. If biomethane production is paired with carbon capture and storage, emission abatement is increased to 3–34%. This research indicates various short-term pathways to reduce GHG emissions with portfolio diet shifts. Utilising freed-up land for climate change mitigation strategies could prove essential to meet climate targets, but trade-offs with, e.g. biodiversity and ecosystem services exist and should be considered. • Diet portfolios are used to represent realistic population diets. • Diet portfolios include a mixture of 12 different diets. • GHG emissions decrease by 67% if the population adopts a Vegan diet. • Afforestation removes almost double the emissions compared to biomethane. • BECCS has similar GHG abatement to afforestation. [ABSTRACT FROM AUTHOR]

Carbon neutral labeling of food products is a market-based approach to reduce carbon footprints in the agri-food sector. To better understand consumers' preferences and attitudes towards a carbon neutral label on globally traded agri-food products, the willingness to pay (WTP) of German consumers for a carbon neutral label on specialty coffee was examined. A discrete choice experiment was conducted in Germany, where coffee is often sold with multiple labels or claims, in order to examine the WTP for alternative combinations of a carbon neutral label with either a Fair Trade label or a claim of direct trade coffee sourcing. Choice data were analyzed using random parameter logit models which determined a positive WTP for the carbon neutral label. This estimate exceeds the corresponding marginal costs of certification and the marginal social cost of carbon, yet it is relatively lower than the estimated WTP for the Fair Trade label and the direct trade claim. A positive synergy effect on utility was also determined for the combination of a carbon neutral label and a direct trade claim. If no additional information was provided, consumers often perceived coffee as a "natural product" that does not generate any greenhouse gas emissions. Thus, awareness-building policies are needed to make carbon neutral labels an effective market-based tool to reduce greenhouse gas emissions in the agri-food sector. • German consumers are willing to pay for a carbon neutral label on specialty coffee. • The WTP for a carbon neutral label was lower than that for ethical trade claims. • We found a positive synergy between the carbon label and a direct trade claim. • Consumers have limited awareness of greenhouse gas emissions in coffee value chains. • Carbon neutral labeling needs to be leveraged with education campaigns to make it effective. [ABSTRACT FROM AUTHOR]