Search

This paper describes the development of an original micro-solid phase extraction device and its evaluation for the isolation of F2-isoprostanes (F2-IsoPs) from cord and maternal plasma samples. The unit is very simple and consists in a rotating disc (1.8 cm diameter) of oxidized buckypaper (BP), enwrapped in a polypropylene mesh pouch. Even if the selected F2-IsoPs have logP and pKa values that make them suitable candidates for their sorption on BP, several parameters were optimized to maximize recoveries: time of adsorption and desorption; stirring speed; volume, pH and ionic strength of the sample; type, volume, and fractions of the elution solvent; oxidation grade of BP. Among all, the last one was crucial in affecting extraction yields because of the analyte interactions with polar functionalities, introduced by a preliminary oxidative acid treatment. The investigation established the optimal oxidation time and highlighted the pros and cons of the acid activation step. All extracts were analyzed by means of liquid chromatography-tandem mass spectrometry (LC–MS/MS). Validation was performed according to the main FDA guidelines for bioanalytical methods. Depending on the spike level and analyte, recoveries ranged between 30 and 120% with precision and accuracy values lower than 20%. Quantitative analysis was accomplished by matrix-matched calibration curves whose determination coefficients were higher than 0.95. Lower limit of quantitation (LLOQ) spanned the range 2.45–6.77 μg L−1. The validated method was applied to the analysis of eight pairs of mother/child plasma samples, revealing the presence of 8-iso-15-keto-PGF2α and 8-iso-PGE2 at a concentration of about 10 μg L−1 in most cord plasma samples of preterm newborns.

Lactic acidemia is commonly associated with severe diseases in pediatric patients. Quantitation of blood lactate and pyruvate is important for the diagnosis and clinical management. A liquid chromatography-tandem mass spectrometry (LC-MS/MS) method using dried blood spots (DBS) was developed and could be used for simultaneous quantification of blood lactate and pyruvate. The applicability of the developed method was tested and confirmed by the regression analysis between LC-MS/MS method and enzymatic assay. Lactate and pyruvate were extracted from DBS obtained from 580 full-term, 120 pre-term infants (gestations ranging from 24 to 36 weeks), and 65 patients with suspected lactic acidemia, with methanolic internal standard (IS) solutions of sodium L-lactate-(13)C(3) and pyruvate-(13)C(3). An API-2000 LC-MS/MS system with multiple reaction monitoring (MRM) mode was applied. The within-run and between-run precisions (CV%) were determined and the results were 1.9% and 3.9% for lactate (n=20) and 5.7% and 7.3% for pyruvate (n=20). The linearity of lactate (r=0.9986) and pyruvate (r=0.9973) based on the IS was excellent. The parameter r squared (r(2)) of linear regression between LC-MS/MS method and enzymatic assay was 0.9405 for lactate and 0.9447 for pyruvate, respectively, and the agreement between these methods was consistent and acceptable. The stability of lactate and pyruvate on DBS was also confirmed. The LC-MS/MS method we developed is a specific, sensitive, and reproducible method for measuring blood lactate and pyruvate concentrations. The use of DBS in this method makes it particularly attractive for pediatric patients.

Three analytical methods were developed for the determination of toxic compounds in recirculating waters of a paper-recycling industry. Three main groups of compounds were considered: (i) wood extractives originated from the raw material; (ii) biocides added during the production process and (iii) surfactants and other adjuvants present in the formulates of these biocides. Wood extractives considered in this study included fatty and resin acids. They were analysed by liquid–liquid extraction using methyl tert.-butyl ether, followed by gas chromatography–mass spectrometry for previous formation of the respective trimethylsilyl esters. Water samples were also extracted with Oasis HLB (copolymer [poly(divinylbenzene-co-N-vinylpyrrolidone]) solid-phase extraction cartridges of 60 mg and analysed by liquid chromatography–electrospray mass spectrometry for the determination of additives and biocides. Using these two approaches levels up to 15 mg/l for total resin and fatty acids, 5 mg/l for alkylbenzene sulfonates and 2-(thiocyanomethylthio)benzotiazol, 100 μg/l for bisphenol A and 2,2-dibromo-3-nitrilepropionamide, and 300 μg/l for nonylphenol ethoxycarboxylate were detected in process waters at different production treatment stages. These levels are of relevance since poor water quality affects the paper-recycling process, the primary water treatment process and eventually, the environmental water quality.