Search

This paper presents a multiple headspace extraction (MHE) analysis technique to determine the water vapor transmission rate of cellulose-based papers. The water vapor passing through the sample in a closed headspace vial is determined by MHE-gas chromatography. The results show that the employed method offers good precision (the relative standard deviation < 3.49 %) and good accuracy. The method is rapid and accurate, and is promising for the determination of the water vapor transmission rate of cellulose-based papers in future studies., Competing Interests: Declaration of Competing Interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Polyolefins are the most commercially relevant polymers by volume. A readily available feedstock and their tailor-made microstructure allow to adapt polyolefins to many fields of application. Important molecular design features of olefin copolymers are the molar mass distribution (MMD) with the corresponding average values, comonomer type, chemical composition distribution (CCD) with the corresponding average and the tacticity distribution (TD). Advanced separation techniques i.e., high-temperature gel permeation chromatography (HT-GPC) as well as its hyphenation with high-temperature high performance liquid chromatography (HT-HPLC) in the form of high-temperature two-dimensional liquid chromatography (HT 2D-LC) have been successfully applied in this work. This allowed to deeply analyze the molecular heterogeneities of complex polyolefin terpolymers consisting of ethylene, vinyl acetate and branched vinyl ester monomers. By using filter-based infrared detection, the capabilities of HT-GPC are further extended so that the distribution of methyl- and carbonyl groups could be obtained along the molar mass axis. Using porous graphitic carbon (PGC) as a stationary phase for HT-HPLC separation provided information about the CCD of these complex polyolefins from experimental data as part of the hyphenated approach of HT 2D-LC. The latter revealed the full MMD x CCD distribution function, which is the key for a comprehensive analysis of the bivariate molecular structure of the polyolefin terpolymers., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Jan-Hendrik Arndt reports financial support was provided by Braskem SA. Guru Geertz reports financial support was provided by Braskem SA. Robert Bruell reports financial support was provided by Braskem SA. Sampat Singh Bhati reports a relationship with Braskem Europe that includes: employment. Hadi Mohammadi, Manoela Ellwanger Cangussu has patent #WO 2021/064,474 A1 issued to Braskem SA., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Gas chromatography (GC) is a versatile tool for separating various volatile, semi-volatile, and thermally stable compounds. However, the ghost peaks in the GC are now a major concern for chromatographic analysts. Ghost peaks may interfere with the analyte, leading to inaccurate results, so identifying the sources generating these peaks is essential for the validated analysis of the compounds of interest. This review compiles various sources responsible for generating ghost peaks in the GC and their possible troubleshooting methods for the smooth and consistent running of the ghost peak-free gas chromatography system, which will be very helpful for rapid and validated analysis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Determining the methanol partition coefficient (K ow ) in octanol/water system is important to assess the risk of its impact to humans and the environment. In this paper, we report a novel method for the determination of the K ow of methanol with headspace gas chromatography (HS-GC), using a three-phase equilibrium-based phase ratio variation approach. Three headspace vials with different phase ratios [(1) 0.2 mL of water plus 3 mL of octanol, (2) 1 mL of water plus 3 mL of octanol and (3) 1 mL of water plus 10 mL of octanol] were used in the experiment. After pre-standing at 25 °C for > 10 h and equilibrating in the headspace oven at a temperature of interest for additional 25 min, the methanol signals of the vapor phase (i.e., the headspace) in these vials were measured by HS-GC, from which the K ow of methanol can be calculated based on the established equations. The results showed that the method has good precision (within 0.06 log unit in standard deviation) and acceptable accuracy (with method error within 0.5 log unit). A correlation between the K ow of methanol and temperature extrapolated the K ow values in a temperature range of interest. The present method represents a simple and in-situ approach for the determination of the K ow of methanol and is also suitable to be applied to other volatile compounds., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

This paper reports on a new method for simultaneously determining the amphiphobicities of material surface by a dual-indicator assisted headspace gas chromatography. After adding 40 μL of both methanol-water and toluene-oil droplets on the sample surface for 20 s, the sample was turned vertically (to remove water and oil) and then placed in a headspace vial. The amount of methanol and toluene in the residual water and oil adhered to material surface was quantified using headspace gas chromatography. The results showed that the method has good measurement precision (RSD < 4.58%). It can be an effective tool for simultaneously determining the amphiphobicities of material surface., Competing Interests: Declaration of Competing Interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled., (Copyright © 2021. Published by Elsevier B.V.)

This paper reported a headspace gas chromatography (HS-GC) for the determination of denitrifying enzyme activity in soil samples. It was based on measuring the NO 2 signal in a set of closed/air-free vials containing soil samples that incubated at the designated conditions. The results showed that the method has a good measurement precision (RSD < 5.0%) and reasonable accuracy for determining the denitrifying enzyme activity in soil samples. It is simple and efficient, and very suitable to be used in batch sample analysis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This paper reported a new method for the determination of the water distribution in sludge. It was based on a multiple headspace extraction (MHE) procedure to step-wise remove the water vapor from a closed vial containing a sludge sample, followed by a gas chromatographic measurement (GC). By plotting the GC signal of water vapor vs. the headspace extraction number, three different trend lines from the profile can be observed. From which two transition points can be determined and thus the stages for the free water, capillary water, and adsorption water release can be divided. Based on the sum of GC peak areas ate each stage, the content of these water types in the sludge can be calculated through a method calibration. The results showed that the MHE-GC method has a better measurement repeatability (RSD < 18.6%) and sensitivity (limit of quantitation = 0.028%) than the thermal drying method (used as a reference method). There was also a good agreement between the MHE-GC and the reference method on the free water and capillary water analysis. Moreover, the results on the adsorption water and bound water testing by the present method is more justifiable than the reference method., Competing Interests: Declaration of Competing Interest No conflict of interest exists in the submission of this manuscript, and the manuscript is approved by all authors for publication. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere. All the authors listed have approved the manuscript that is enclosed., (Copyright © 2020. Published by Elsevier B.V.)

This paper demonstrated a simple and rapid approach for the determination of lead dioxide in minium using a headspace gas chromatographic (GC) technique. This new approach was based on the measurement of carbon dioxide from the redox reaction between lead dioxide and oxalic acid in a sealed headspace vial. The obtained results indicated that the new approach had good measurement accuracy (relative errors ≤8.71%) and precision (RSD ≤2.86%). Moreover, the limit of quantification (LOQ) and limit of detection (LOD) for this new approach were respectively 0.34% and 0.10%, and the recoveries ranged from 97.9 to 101.7%. The new approach is low-cost and reliable, which has potential for use in the analysis of lead dioxide in minium and related products., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019. Published by Elsevier B.V.)

This paper describes a headspace gas chromatographic (HS-GC) method for the in-situ determination of the observed yield coefficient (Y obs ) of aerobic activated sludge from domestic wastewater treatment plants. It is based on the measurement of oxygen and carbon dioxide in samples that have been incubated in headspace vials for relatively short periods of time. The method has good precision (the relative standard deviation < 5.46%) and accuracy (the relative differences < 9.23% when compared with the data from the reference method). The new method is much simpler and more efficient than the reference methods and should greatly facilitate the testing in aerobic activated sludge related applications, such as system design, operation and management., (Copyright © 2019. Published by Elsevier B.V.)

This paper reports on a headspace gas chromatographic method (HS-GC) for the accurate determination of dissolved oxygen (DO) in domestic and industrial wastewater. It was based on GC measurement of oxygen in the headspace gas that is released from the dissolved oxygen in a liquid sample in a closed vial. The results show that the relative standard deviation of the method in quintuplicate testing was < 2.0% and the relative differences of results were less than 4.0% for the real river water samples when compared with the widely used reference method (the electrode method); The linear range of the method is about 0-9.0 mg/L with the limit of detection of 0.30 mg/L. The present method is simple in both sample preparation and method calibration. It is particularly efficient in the batch testing mode. Overall, the method is more reliable than the current reference method when used with samples from a wide range of sources., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This paper reports on an automated temperature-programmed headspace GC technique for the determination of gelatinization temperature of starch. 1-butanol was used as a tracer and added to the starch-solution for the test. Based on measuring the GC signal of 1-butanol in the headspace with the temperature increasing, two transition points (corresponding to the onset temperature and the ending temperature of starch gelatinization) were observed by plotting the GC signal of 1-butanol vs. the temperature. The results showed that the method has a good measurement precision (the standard deviation < 1 °C) and accuracy (the average relative differences = 3.9%, compared to a standard reference method). The present method is simple and suitable for the gelatinization temperature testing for starch samples., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A fast, convenient and commercially available approach for analyzing humic acid content in fertilizer using headspace gas chromatography (HS-GC) is presented in this paper. Humic acid is converted into carbon dioxide based on the oxidation of humic acid in strong acidic medium and can be measured via automatic HS-GC. Conditions for the alkaline extraction and the humic acid oxidation process are also optimized. The new technique proved to be precise (RSD ≤ 3.59%) and accurate (relative errors≤9.46% as compared with the spectrophotometric approach). The newly established technique presents a practical tool to routinely analyze humic acid content in fertilizer during the fertilizer production., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This study demonstrated a novel method for determining the melting point (MP) of industrial grade alkyl ketene dimer (AKD) wax by an automated headspace gas chromatographic (HS-GC) technique, in which methanol was used as the tracer. It was based on measuring the GC signal of methanol released from an aqueous solution during the temperature increasing. When the temperature of AKD MP reached, the AKD granules floated on the surface aqueous solution was liquidized and completely isolated the methanol transfer from the solution to the headspace. Thus, a transition point, corresponding to the MP of AKD wax, was observed when plotting the GC signal of methanol vs. the temperature. The results showed that the method has a good measurement precision (RSD < 0.68%) and accuracy (the relative differences were < 7.16%, compared to a reference method). The present method is simple, accurate and particularly suitable to be used in the batch sample testing. This new measurement concept can be also adopted to many related applications., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This paper introduces a convenient approach for determining iodate in iodized salt by headspace gas chromatography (HS-GC). The analytical technique can measure the generated carbon dioxide from the redox reaction between iodate and sodium oxalate in the presence of strong acid. The formed carbon dioxide from this reaction in a closed vial is measured by GC. It was observed that the redox reaction in the vial was completed in 40 min at 95 °C. The results indicated that this analytical technique is precise (RSD ≤ 2.69%) and accurate (relative errors ≤ 7.21%). The present approach is fast and simple, providing a robust avenue to the routine estimation of iodate in iodized salt in a wide variety of applications from processing to quality monitoring., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This paper reports on a high-throughput headspace gas chromatographic method (HS-GC) for the determination of nitrite content in water sample, based on GC measurement of cyclohexene produced from the reaction between nitrite and cyclamate in a closed vial. The method has a relative standard deviation of <3.5%; The differences between the results of the nitrite measurements obtained by this method and those of a reference method were less than 5.8% and the recoveries of the method were in the range of 94.8-102% (for a spiked nitrite content range from 0.002 to 0.03 mg/L). The limit of detection of the method was 0.46 μg L -1 . Due to an overlapping mode in the headspace auto-sampler system, the method can provide an automated and high-throughput nitrite analysis for the surface water samples. In short, the present HS-GC method is simple, accurate, and sensitive, and it is very suitable to be used in the batch sample testing., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This paper investigates a new double sealing technique for increasing the precision of the headspace gas chromatographic method. The air leakage problem caused by the high pressure in the headspace vial during the headspace sampling process has a great impact to the measurement precision in the conventional headspace analysis (i.e., single sealing technique). The results (using ethanol solution as the model sample) show that the present technique is effective to minimize such a problem. The double sealing technique has an excellent measurement precision (RSD < 0.15%) and accuracy (recovery = 99.1%-100.6%) for the ethanol quantification. The detection precision of the present method was 10-20 times higher than that in earlier HS-GC work that use conventional single sealing technique. The present double sealing technique may open up a new avenue, and also serve as a general strategy for improving the performance (i.e., accuracy and precision) of headspace analysis of various volatile compounds., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This paper reports on an ionic-liquid assisted headspace gas chromatographic (HS-GC) for the determination of the content of alkyl ketene dimer (AKD) in its latex samples, in which the GC system was equipped with a thermal conductivity detector (TCD). The method was based on the AKD hydrolysis conducted in 1-butyl-3-methylimidazolium chloride (ionic-liquid) added medium at 100°C for 10min in a closed headspace sample vial, and the measured CO 2 (the resulting product of the hydrolysis) by HS-GC. The results showed that the present method has a good measurement precision (RSD <2.3%) and accuracy (recoveries from 96 - 105%), and the limit of quantitation (LOQ) is 0.9%. The present method is very suitable to be used for the routine check of AKD content in its latex sample in mill applications. The study also showed that the content of AKD in the tested commercial latex samples were in the range of 3.5-12%., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This work investigates an automated technique for rapid detecting the glucose content in glucose injection by reaction headspace gas chromatography (HS-GC). This method is based on the oxidation reaction of glucose in glucose injection with potassium dichromate. The carbon dioxide (CO 2 ) formed from the oxidation reaction can be quantitatively detected by GC. The results show that the relative standard deviation (RSD) of the present method was within 2.91%, and the measured glucose contents in glucose injection closely match those quantified by the reference method (relative differences <6.45%). The new HS-GC technique is rapid, practical and can be used to the batch detection of the glucose content in glucose injection related applications., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This paper reports on a new method for the determination of swelling capacity of superabsorbent polymers by a volatile tracer-assisted headspace gas chromatography (HS-GC). Toluene was used as a tracer and added to the solution for polymers swelling test. Based on the differences of the tracer partitioned between the vapor and hydrogel phase before and after the polymer's swelling capacity, a transition point (corresponding to the material swelling capacity) can be observed when plotting the GC signal of toluene vs. the ratio of solution added to polymers. The present method has good precision (RSD<2.1%) and good accuracy, in which the relative deference between the data measured by the HS-GC method and the reference method were within 8.0%. The present method is very suitable to be used for testing the swelling capacity of polymers at the elevated temperatures., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This work investigates a new reaction headspace gas chromatographic (HS-GC) technique for efficient quantifying average valence of manganese (Mn) in manganese oxides. This method is on the basis of the oxidation reaction between manganese oxides and sodium oxalate under the acidic condition. The carbon dioxide (CO 2 ) formed from the oxidation reaction can be quantitatively analyzed by headspace gas chromatography. The data showed that the reaction in the closed headspace vial can be completed in 20min at 80°C. The relative standard deviation of this reaction HS-GC method in the precision testing was within 1.08%, the relative differences between the new method and the reference method (titration method) were no more than 5.71%. The new HS-GC method is automated, efficient, and can be a reliable tool for the quantitative analysis of average valence of manganese in the manganese oxide related research and applications., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The present work reports on the development of a pressure-affected based headspace (HS) analytical technique for the determination of calcium carbonate content in paper samples. By the acidification, the carbonate in the sample was converted to CO 2 and released into the headspace of a closed vial and then measured by gas chromatography (GC). When the amount of carbonate in the sample is significant, the pressure created by the CO 2 affects the accuracy of the method. However, the pressure also causes a change in the O 2 signal in the HS-GC measurement, which is a change that can be used as an indirect measure of the carbonate in the sample. The results show that the present method has a good precision (the relative standard deviation<2.32%), and good accuracy (the relative differences compared to a reference method was<5.76%). Coupled with the fact that the method is simple, rapid, and accurate, it is suitable for a variety of applications that call for the analysis of high carbonate content in paper samples., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This study demonstrated a headspace gas chromatographic (HS-GC) method for the determination of residual epichlorohydrin (ECH) and the by-product 1,3-dichloro-2-propanol (DCP) in polyamine epichlorohydrin (PAE) solution. It was based on the vapor-liquid phase equilibrium of these analytes at 60°C for 30min in a closed headspace sample vial before GC measurement. It was found that matrix of the PAE solution had the effect on the headspace equilibrium of these species and therefore a standard addition must be applied in the method validation. The results showed that the present method has a good measurement precision (RSD <2.90%) and accuracy (recoveries from 93.6 to 105%), and the limit of quantitation (LOQ) is 3.75mg/L for ECH and 0.8g/L for DCP. The present method is suitable to be used for analyzing the chlorinated volatile organic compounds in the commercial PAE resin solutions., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This work reports on a method for the determination of residual acrylic acid (AA) in the superabsorbent polymers for hygiene products by headspace analysis. It was based on water extraction for the polymer sample at a room temperature for 50min. Then, the AA in the extractant reacted with bicarbonate solution in a closed headspace sample vial, from which the carbon dioxide generated from the reaction (within 20min at 70°C) was detected by gas chromatography (GC). It was found that there is adsorption partition equilibrium of AA between solid-liquid phases. Therefore, an equation for calculating the total AA content in the original polymers sample was derived based on the above phase equilibrium. The results show that the HS-GC method has good precision (RSD<2.51%) and good accuracy (recoveries from 93 to 105%); the limit of quantification (LOQ) was 373mg/kg. The present method is rapid, accurate, and suitable for determining total residual acrylic acid in a wide variety of applications from processing of superabsorbent polymer to commercial products quality control., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This work reports on a novel method for the determination of isocyanate groups in the related organic intermediates by a reaction-based headspace gas chromatography. The method is based on measuring the CO 2 formed from the reaction between the isocyanate groups in the organic intermediates and water in a closed headspace sample vial at 45°C for 20min. The results showed that the method has a good precision and accuracy, in which the relative standard deviation in the repeatability measurement was 5.26%, and the relative differences between the data obtained by the HS-GC method and the reference back-titration method were within 9.42%. The present method is simple and efficient and is particularly suitable to be used for determining the isocyanate groups in the batch sample analysis., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This work reports on a method for the accurate determination of fiber water-retaining capability at process conditions by headspace gas chromatography (HS-GC) method. The method was based the HS-GC measurement of water vapor on a set closed vials containing in a given amount pulp with different amounts of water addition, from under-saturation to over-saturation. By plotting the equilibrated water vapor signal vs. the amount of water added in pulp, two different trend lines can be observed, in which the transition of the lines corresponds to fiber water-retaining capability. The results showed that the HS-GC method has good measurement precision (much better than the reference method) and good accuracy. The present method can be also used for determining pulp fiber water-retaining capability at the process temperatures in both laboratory research and mill applications., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Plant polysaccharides constitute arguably the most complex family of biomacromolecules in terms of the stereochemistry and regiochemistry of their intramolecular linkages. The chemical modification of such polysaccharides introduces an additional level of complexity for structural determinations. We have developed an integrated analytical procedure combining selective enzymatic hydrolysis, hydrophilic interaction liquid chromatography (HILIC), and mass spectrometry (MS) to describe the substitution pattern of xyloglucan (XyG) and its chemo-enzymatic derivatives (cationic, anionic, and benzyl aminated). Enzymatic hydrolysis of XyG derivatives by a xyloglucan-specific endoglucanase (XEG) generates oligosaccharides amenable for mass spectrometric identification with distinct structures, based on enzymatic substrate recognition and hydrolytic pattern. Matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-ToF-MS) and electrospray ionisation mass spectrometry (ESI-MS) offer qualitative mass profiling of the chemical derivatives. Separation and identification of the complex oligosaccharide profiles released by enzymatic hydrolysis is achieved by hyphenation of hydrophilic interaction liquid chromatography with mass spectrometry (HILIC-ESI-MS). Further fragmentation by tandem mass spectrometry (ESI-MS/MS) in positive mode enables the structural sequencing of modified XyG oligosaccharides and the identification of the substituent position without further derivatisation. This integrated approach can be used to obtain semi-quantitative information of the substitution pattern of hemicellulose derivatives, with fundamental implications for their modification mechanisms and performance., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This paper describes a new method for the rapid determination of the moisture content in paper materials. The method is based on multiple headspace extraction gas chromatography (MHE-GC) at a temperature above the boiling point of water, from which an integrated water loss from the tested sample due to evaporation can be measured and from which the moisture content in the sample can be determined. The results show that the new method has a good precision (with the relative standard deviation <0.96%), high sensitivity (the limit of quantitation=0.005%) and good accuracy (the relative differences <1.4%). Therefore, the method is quite suitable for many uses in research and industrial applications., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This study reports a new headspace gas chromatographic method (HS-GC) for the determination of water solubility of low volatility liquid organic compounds (LVLOs). The HS-GC analysis was performed on a set of aqueous solutions containing a range of concentrations of toluene-spiked (as a tracer) LVLOs, from under-saturation to over-saturation. A plot of the toluene tracer GC signal vs. the concentration of the LVLO results in two lines of different slopes that intersect at the concentration corresponding to the compound's solubility in water. The results showed that the HS-GC method has good precision (RSD <6.3%) and good accuracy, in which the relative deference between the data measured by the HS-GC method and the reference method were within 6.0%. The HS-GC method is simple and particularly suitable for measuring the solubility of LVLOs at elevated temperatures. This approach should be of special interest to those concerned about the impact of the presence of low-volatility organic liquids in waters of environmental and biological systems., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Alkylphenol polyethoxylates (APEO), surfactants used in the production of textiles, have the potential to move from the fabric to the skin of the person wearing the clothes, posing an inherent risk of adverse health consequences. Therefore, the textile industry needs a fast, robust method for determining aqueous extractable APEO in fabrics. The currently-favored HPLC methods are limited by the presence of a mixture of analytes (due to the molecular weight distribution) and a lack of analytical standards for quantifying results. As a result, it has not been possible to reach consensus on a standard method for the determination of APEO in textiles. This paper addresses these limitations through the use of reaction-based head space-gas chromatography (HS-GC). Specifically, water is used to simulate body sweat and extract APEO. HI is then used to react the ethoxylate chains to depolymerize the chains into iodoethane that is quantified through HS-GC, providing an estimate of the average amount of APEO in the clothing. Data are presented to justify the optimal operating conditions; i.e., water extraction at 60°C for 1h and reaction with a specified amount of HI in the headspace vial at 135°C for 4h. The results show that the HS-GC method has good precision (RSD<10%) and good accuracy (recoveries from 95 to 106%) for the quantification of APEO content in textile and related materials. As such, the method should be a strong candidate to become a standard method for such determinations., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The paper reports on a novel method for rapid determination of carbonyl in lignins by headspace gas chromatography (HS-GC). The method involves the quantitative carbonyl reduction for aldehydes in 2min at room temperature or for acetones in 30min at 80°C by sodium borohydride solution in a closed headspace sample vial. After the reaction, the solution was acidified by injecting sulfuric acid solution and the hydrogen released to the headspace was determined by GC using thermal-conductivity detector. The results showed that with the addition of SiO2 powder, the reduction reaction of carbonyl groups can be greatly facilitated. The method has a good measurement precision (RSD<7.74%) and accuracy (relative error <10% compared with a reference method) in the carbonyl quantification. It is suitable to be used for rapid determination of carbonyl content in lignin and related materials., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A novel method for the determination of the diffusion coefficient (D) of methanol in water and olive oil has been developed. Based on multiple headspace extraction gas chromatography (MHE-GC), the methanol released from the liquid sample of interest in a closed sample vial was determined in a stepwise fashion. A theoretical model was derived to establish the relationship between the diffusion coefficient and the GC signals from MHE-GC measurements. The results showed that the present method has an excellent precision (RSD<1%) in the linear fitting procedure and good accuracy for the diffusion coefficients of methanol in both water and olive oil, when compared with data reported in the literature. The present method is simple and practical and can be a valuable tool for the determination of the diffusion coefficient of volatile analyte(s) into food simulants from food and beverage packaging material, both in research studies and in actual applications., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A novel interface that enables high-performance anion-exchange chromatography (HPAEC) to be coupled with electrospray ionization (ESI) mass spectrometry (MS) is reported. A sheath liquid consisting of 50mM NH4Ac in isopropanol with 0.05% acetic acid, infused at a flow rate of 3μL/min at the tip of the electrospray probe, requires less ESI source cleaning and promotes efficient ionization of mono- and di-carbohydrates. The results suggest that use of a sheath liquid interface rather than a T-joint allows volatile ammonium salts to replace non-volatile metal salts as modifiers for improving sugar ESI signals. The efficient ionization of mono- and di-carbohydrates in the ESI source is affected by the sheath liquid properties such as buffer concentration and type of organic solvent. HPAEC-ESI-MS was used for the analysis of monocarbohydrates in pectins, particularly co-eluted sugars, and the performance was evaluated. Addition of a make-up solution through the sheath liquid interface proved to be an efficient tool for enhancing the intensities of sugars analyzed using HPAEC-ESI-MS., (Copyright © 2014 Elsevier B.V. All rights reserved.)

This work demonstrates a novel method for rapid determination of total solid content in viscous liquid (polymer-enriched) samples. The method is based multiple headspace extraction gas chromatography (MHE-GC) on a headspace vial at a temperature above boiling point of water. Thus, the trend of water loss from the tested liquid due to evaporation can be followed. With the limited MHE-GC testing (e.g., 5 extractions) and a one-point calibration procedure (i.e., recording the weight difference before and after analysis), the total amount of water in the sample can be determined, from which the total solid contents in the liquid can be calculated. A number of black liquors were analyzed by the new method which yielded results that closely matched those of the reference method; i.e., the results of these two methods differed by no more than 2.3%. Compared with the reference method, the MHE-GC method is much simpler and more practical. Therefore, it is suitable for the rapid determination of the solid content in many polymer-containing liquid samples., (Copyright © 2014 Elsevier B.V. All rights reserved.)

This study reports on a rapid method for the determination of methanol in paper-based materials by alkaline extraction, coupled with headspace analysis. Methanol partition equilibria between solid-liquid phases and vapor-liquid phases were conducted in two separate containers, from which an equation for calculating the total methanol content in the original paper sample was derived. It was found that the extraction equilibrium of methanol from solid sample could be achieved within 5min at room temperature using a high-speed disintegrator, and a subsequent neutralization step is an effective way to prevent methanol from being regenerated at high temperature during headspace equilibration. The results showed that the relative standard deviations for reproducibility tests were in the range of 1.86-6.03%, and the recoveries were in the range of 92.3-107%. The present method is simple and practical; it can be an efficient tool for quantifying the methanol content in paper-based materials and thus play an important role in the investigation of methanol migration behavior in food and beverage packaging., (Copyright © 2014 Elsevier B.V. All rights reserved.)

This paper reports on the development of a new headspace analytical technique that is based on water removal by hydrate formation (WRHF). By adding anhydrous salt, the liquid water in an aqueous sample will be removed leaving behind volatile analytes that are fully vaporized at temperatures well below their boiling points. With WRHF, the amount of sample in the headspace can be significantly increased, thereby dramatically improving the detection sensitivity. The technique reduces the risk of possible column damage in gas chromatography (GC) systems. The technique was applied to the determination of phenol at different stages of a coking wastewater treatment plant. The results showed that up to mL-levels of sample solution can be used in WRHF HS-GC analysis when 5g of CaCl2 were used as the anhydrous salt. The detection sensitivity for phenol content was 500 times greater than that in earlier HS-GC work that did not incorporate hydrate formation. The proposed WRHF headspace analysis technique is simple and practical, making it a useful tool for quantifying low concentrations of volatile analytes in aqueous samples., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In this paper, we present a novel method for determining the maximal amount of ethane, a minor gas species, adsorbed in a shale sample. The method is based on the time-dependent release of ethane from shale samples measured by headspace gas chromatography (HS-GC). The study includes a mathematical model for fitting the experimental data, calculating the maximal amount gas adsorbed, and predicting results at other temperatures. The method is a more efficient alternative to the isothermal adsorption method that is in widespread use today., (Copyright © 2013 Elsevier B.V. All rights reserved.)

This work demonstrates a novel method for the determination of viscosity in the concentrated black liquors from pulp mill recovery process. The method is based on the kinetic release of methanol (a vapor tracer) to the headspace in a sample closed vial by a multiple headspace extraction gas chromatographic technique. Both theoretical and empirical models were proposed for establishing the correlation with the reference method. The results showed that the correlation using either of the models is excellent for the tested black liquor samples (at 110°C). The presented method is simple and practical and can be a valuable tool for black liquor viscosity related research and applications., (Copyright © 2013 Elsevier B.V. All rights reserved.)

A novel method has been developed for the determination of adsorption partition coefficient (Kd) of minor gases in shale. The method uses samples of two different sizes (masses) of the same material, from which the partition coefficient of the gas can be determined from two independent headspace gas chromatographic (HS-GC) measurements. The equilibrium for the model gas (ethane) was achieved in 5h at 120°C. The method also involves establishing an equation based on the Kd at higher equilibrium temperature, from which the Kd at lower temperature can be calculated. Although the HS-GC method requires some time and effort, it is simpler and quicker than the isothermal adsorption method that is in widespread use today. As a result, the method is simple and practical and can be a valuable tool for shale gas-related research and applications., (Copyright © 2013 Elsevier B.V. All rights reserved.)

This paper describes a novel multiple-headspace extraction/gas chromatographic (MHE-GC) technique for monitoring monomer conversion during a polymerization reaction in a water-based emulsion environment. The polymerization reaction of methyl methacrylate (MMA) in an aqueous emulsion is used as an example. The reaction was performed in a closed headspace sample vial (as a mini-reactor), with pentane as a tracer. In situ monitoring of the vapor concentration of the tracer, employing a multiple headspace extraction (sampling) scheme, coupled to a GC, makes it possible to quantitatively follow the conversion of MMA during the early stages of polymerization. Data on the integrated amount of the tracer vapor released from the monomer droplet phase during the polymerization is described by a mathematic equation from which the monomer conversion can be calculated. The present method is simple, automated and economical, and provides an efficient tool in the investigation of the reaction kinetics and effects of the reaction conditions on the early stage of polymerization., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A headspace gas chromatographic (HS-GC) method has been developed for the determination of residual hydrogen peroxide in pulp bleaching effluents. The method is based on the reaction of hydrogen peroxide and permanganate in an acidic medium (0.1 mol/L), in which hydrogen peroxide is quantitatively converted to oxygen within 10 min at 60°C in a sealed headspace sample vial. The released oxygen is then determined by GC equipped with a thermal conductivity detector. The method is robust, sensitive, and accurate, with reproducibility characterized by a relative standard deviation of <0.5%, a sensitivity whose limit of quantification (LOQ) is 0.96 μmol, and a demonstrated recovery ranging from 98 to 103%. Further, the method is simple, rapid, and automated., (Copyright © 2012 Elsevier B.V. All rights reserved.)

This paper reports on a headspace gas chromatographic method (HS-GC) for rapid determination of degree of substitution in succinic anhydride (SA) modified celluloses. The method is based on the reaction between the carboxyl groups in SA modified cellulose and bicarbonate solution in a closed headspace sample vial. The CO(2) released from the reaction was measured by HS-GC. The completion of the reaction was achieved within 25 min at 80 °C when a small sample size (<20 mg) was used. The relative standard deviation (RSD) measurement of precision was less than 4.1%, and the results were within 8.0% of those obtained with the traditional titration for determining the degree of substitution. The present method is simple, practical, automated, and suitable for use in anhydride modified cellulose research., (Copyright © 2012 Elsevier B.V. All rights reserved.)

This paper reports on a desiccated full evaporation headspace gas chromatographic (FE HS-GC) technique for determination of the methanol content in dilute mill effluents. Anhydrous K(2)CO(3) was selected as the preferred salt for eliminating the water in the sample in the headspace sample vial. The results showed that the addition of 12 g K(2)CO(3) made it possible to introduce a larger sample size (up to 1 mL) into the FE HS-GC measurement, thereby increasing the sensitivity of the technique. At the given equilibration temperature (105°C), a near-complete mass transfer of methanol from the liquid phase to vapor phase (headspace) was achieved within 10 min. Replicate samples showed that the relative standard deviation of the method was less than 1.5%. Further, the limit of quantification (LOQ) was 0.12 μg and the recovery ranged from 95 to 104%. The present method greatly improves the methanol detection sensitivity in the FE HS-GC method and has the added advantage of being simple, rapid and accurate., (Copyright © 2011 Elsevier B.V. All rights reserved.)

This study demonstrates a headspace gas chromatographic(HS-GC) technique for the determination of residual epichlorohydrin (ECH) and generated 1,3-dichloro-2-propanol (DCP) in synthesis process of 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHTAC). By a weight-based sampling method, coupled with significant dilution in 15.8% sodium sulfate and 0.1% silver nitrate mixed solution rapidly, the sample for HS-GC analysis is prepared. Based on the reaction stoichiometry, the conversion (R) of CHTAC during the synthesis process can be calculated from sampling weight and GC peak area. The results showed that the method has a good measurement precision (RSD<2.5%) and accuracy (recovery=101-104%) for the quantification of both ECH and DCP in the process samples. The present method is simple and accurate, which can be used for the efficient determination of the CHTAC conversion in the synthesis research., (Copyright © 2011 Elsevier B.V. All rights reserved.)

This paper reports a full evaporation (FE) headspace gas chromatographic (HS-GC) method for rapid determination of furfural in the biomass hydrolysate. The data show that a near-complete mass transfer of furfural in the sample from biomass hydrolysate to the vapor phase (headspace) was achieved within 3 min at 105°C when a very small (<40 μL) sample was added to a 20 mL headspace sample vial. The acid-catalyzed furfural decomposition under these conditions was negligible. The furfural in the vapor phase was then determined by HS-GC using a flame ionization detector. The results showed that the method has an excellent measurement precision (RSD<0.5%) and accuracy (recovery=100.2±1.7%) for furfural quantification in carbohydrate hydrolysate samples. The method requires no sample pretreatment, so it is simple, rapid and accurate, and suitable for applications in lignocellulosic biomass conversion to fuel ethanol or other high value-added products., (Copyright © 2010 Elsevier B.V. All rights reserved.)

This paper reports a full evaporation (FE) headspace gas chromatographic (GC) method for rapid determination of ethanol in fermentation liquor. The data show that ethanol in the fermentation liquor was transferred to the vapor phase (headspace) almost completely within 3 min at a temperature of 105 degrees C when a very small volume (< 50 microL) of sample was directly added to a sealed headspace sample vial (20 mL). The ethanol in the vapor phase was then measured by headspace GC using a flame ionization detector. The results show that the present method has an excellent measurement precision (RSD=1.62%) and accuracy (recovery=98.1 (+/-1.76%)) for the ethanol quantification in fermentation liquors. The method requires no sample pretreatment and is very simple and rapid.

This study demonstrated a headspace gas chromatographic method (HS-GC) for the determination of oxalate content in black liquor (alkaline aqueous solution of inorganic chemicals and dissolved wood species from the alkaline pulping of wood). The method described in this paper is based on the reaction between oxalic and manganese dioxide in an acidic medium, in which oxalic acid is converted to carbon dioxide that is measured with a GC using a thermal conductivity detector. The challenge in developing this method was ensuring complete conversion of oxalic acid while minimizing the contribution of side reactions between carbohydrates, lignin and manganese dioxide to the carbon dioxide measured. It was found that a complete conversion of oxalate to carbon dioxide can be achieved within 3 min at a temperature of 70 degrees C; a MnO(2):C(oxalate) (concentration of H(2)C(2)O(4)+HC(2)O(4)(-)+C(2)O(4)(2-)) mole ratio of 60 and H(2)SO(4) concentration of 0.005-0.01 mol/L in the headspace vial. The method can detect concentrations as low as 0.39 microg of oxalate. The standard deviation was found to be 7% while recovery experiments with black liquor showed recoveries of 93-108% which were deemed acceptable for analysis of oxalate in an industrial sample such as black liquor.

This paper reported a full evaporation headspace gas chromatographic (GC) technique for determination of methanol content in black liquors (pulping spent liquor). In this method, a very small volume (10-20 microL) of liquor sample is introduced into a headspace sample vial (20 mL) and heated up to a temperature of 105 degrees C. A near-complete mass transfer of methanol from the liquid phase to vapor phase (headspace), i.e., a full evaporation, can be achieved within 3 min. The methanol in the headspace of the vial is then measured by GC. The present method is simple, rapid and accurate.

This paper reports a corrosion problem in the headspace sampling needle when using a phase reaction conversion headspace gas chromatographic method in Agilent headspace auto-sampler. The examination by microscopy shows that corrosion mainly takes place on the surface of the outer wall of the needle that is exposed to the air during each headspace sampling. Since it was proven that the helium flushing is effective in minimizing the pit type of corrosion on the stainless needle material, a custom-made surface flushing device was proposed for corrosion inhibition.

Methods and procedures for analysis of lignans in trees and other plants are reviewed. The importance of cautious sample handling and pretreatment procedures to avoid contamination, loss of sample, and unwanted chemical reactions is discussed. Sequential extraction with a non-polar solvent followed by extraction with acetone or ethanol is recommended to separate the lignans from the plant matrix. An additional step of acid, alkaline, or enzymatic hydrolysis may be necessary for some plant matrixes. Flash chromatography is a convenient method for preparative separation and isolation of pure lignans from raw extracts. TLC is very suitable for qualitative screening of extracts and for monitoring of lignan isolation and purification steps. Trimethylsilyl ethers of lignans can be separated and quantified by GC even in the case of complex mixtures of lignans and other polyphenols, and the lignans can be identified by GC-MS in a routine manner. HPLC on reversed-phase columns is especially suited for analysis of lignans and their metabolites in biological matrixes. The recent development of HPLC-electrospray ionisation (ESI)-iontrap MS (MS(n)) and corresponding techniques with high sensitivity and selectivity has proven valuable in lignan analysis. Lignan enantiomers can be separated on chiral HPLC columns.