Search

The hydrophobic monomer, n-butyl methacrylate (BMA) has been incorporated into thermoresponsive poly(N-isopropylacrylamide) (PIPAAm) to lower PIPAAm phase transition temperatures necessary for systematically regulating cell adhesion on and detachment from culture dishes at controlled temperatures. Poly(IPAAm-co-BMA)-grafted dishes were prepared by electron beam irradiation methods, systematically changing BMA content in the feed. Copolymer-grafted surfaces decreased grafted polymer transition temperatures with increasing BMA content as shown by water wettabilities compared to homopolymer PIPAAm-grafted surfaces. Bovine endothelial cells readily adhered and proliferated on copolymer-grafted surfaces above collapse temperature at 37°C, finally reaching confluence. Cell sheet detachment behavior from copolymer-grafted surfaces depended on the culture temperature and BMA content. In conclusion, cell attachment/detachment can be controlled to an arbitrary temperature by varying the content of hydrophobic monomer incorporated into PIPAAm grafted to culture surfaces. © 2004 Wiley Periodicals, Inc. J Biomed Mater Res 69A: 70–78, 2004

Fabrication of functional tissue constructs using sandwiched layers of cultured cells could prove to be an attractive approach to tissue engineering. Rapid detachment of cultured cell sheets is a very important recovery method that permits facile manipulation of the sheet and prevents functional damage. To accelerate the required culture substrate hydrophilic and hydrophobic structural changes in response to culture temperature alteration, poly(N-isopropylacrylamide) (PIPAAm) was grafted onto porous culture membranes by electron beam irradiation. Analyses by attenuated total reflection-Fourier transform IR and electron spectroscopy for chemical analysis revealed that PIPAAm was successfully grafted to surfaces of porous membranes. Atomic force microscopy (AFM) results showed that PIPAAm-grafted membranes had smoother surfaces than ungrafted controls while retaining their porous structure. The mean roughness of PIPAAm-grafted and -ungrafted porous membrane surfaces determined by digital AFM autocalculation was 4.40 +/- 0.4 and 5.9 +/- 0.4 nm, respectively. Tissue culture polystyrene (TCPS) dishes grafted with PIPAAm were compared with PIPAAm-grafted porous membranes in cell sheet detachment experiments. Approximately 75 min was required to completely detach cell sheets from PIPAAm-grafted TCPS surfaces compared to only 30 min to detach cell sheets from PIPAAm-grafted porous membranes. With porous membranes, the water accesses the PIPAAm-grafted surface from underneath and peripheral to the attached cell sheet, resulting in rapid hydration of grafted PIPAAm molecules and detachment of the cell sheet. With TCPS PIPAAm-grafted surfaces the water is supplied from only the periphery of a cell sheet, slowing detachment.

We have developed a new cell culture substrate grafted with a temperature-responsive polymer, poly(N-isopropylacrylamide) (PIPAAm) using an electron beam irradiation method. These surfaces are hydrophobic in culture at 37 degrees C due to the hydration/dehydration changes intrinsic to PIPAAm at 32 degrees C, and they become highly hydrophilic below 32 degrees C. At 37 degrees C grafted and ungrafted surfaces showed no difference with regard to attachment, spreading, growth, confluent cell density, and morphology of bovine aortic endothelial cells. Stress fibers, peripheral bands, and focal contacts were established in similar ways. After the medium temperature was decreased to 20 degrees C, spread cells lost their flattened morphology, acquiring a rounded cell appearance similar to that of cells immediately after plating. After mild agitation cells floated free from the dish surface without trypsin treatment. Neither cell morphological changes nor cell detachment occurred on ungrafted surfaces. An ATP synthesis inhibitor, sodium azide, and a tyrosine kinase inhibitor, genistein, suppressed cell morphological changes and cell detachment while a protein synthesis inhibitor, cycloheximide, slightly enhanced cell detachment. An actin filament stabilizer, phalloidin, and its depolymerizer, cytochalasin D, also inhibited cell detachment. These findings suggest that cell detachment on grafted surfaces is mediated by intracellular signal transduction and reorganization of the cytoskeleton. While trypsinization causes damage to the cell membrane surface and extracellular matrix proteins, this alternative low temperature treatment is exceptionally noninvasive. The temperature-responsive cell culture surface also should prove useful for investigating the molecular machinery involved in cell-surface detachment.

A novel UV crosslinkable co-polymer of 4-(N-cinnamoylcarbamide)methylstyrene (CCMS) and N-isopropylacrylamide (IPAAm) was partially entrapped in traditional tissue-culture-treated polystyrene and crosslinked by UV light irradiation. Dishes modified by this method showed a change in contact angle with respect to temperature as compared to tissue culture polystyrene controls. Surface chemical analysis indicated that the crosslinked hydrogel does not detach from the surface after successive rinsing in ethanol and water, keeping the cells or cell construct free of unwanted soluble polymer after detachment. Cultures of both bovine endothelium and human retinal pigmented epithelium were confirmed to be able to attach and grow on the polymer-modified surfaces morphologically identical to that on control tissue culture polystyrene surfaces. Corresponding to a change in temperature, these cultures would detach and could be transplanted to another culture surface without functional and structural changes. These results show that the new, photo-crosslinkable hydrogel system can utilize the hydrophobic/hydrophilic change of the surface for cell culture detachment while being permanently applicable to any tissue culture geometry. © 1998 John Wiley & Sons, Inc. J Biomed Mater Res, 40, 631–639, 1998.

Changes in platelet cytoplasmic free calcium levels were investigated in contact with cast film surfaces of a block copolymer containing 2-hydroxyethyl methacrylate (HEMA) and styrene (St) (0.5 mole fraction HEMA). These copolymer surfaces demonstrate microdomain alternating lamellae structures composed of hydrophilic HEMA domains (5 nm width) and hydrophobic St domains (20 nm width). The results were compared with those obtained from platelets contacting a random copolymer of HEMA-St (0.5 mole fraction HEMA) and from homopolymers of polystyrene (PSt) and poly(2-hydroxyethyl methacrylate) (HEMA). Cytoplasmic free calcium levels in platelets contacting the microdomain structured surfaces of the HEMA-St block copolymer remained relatively constant in contrast to the significant increases observed for the radically prepared HEMA-St copolymer, PSt, and PHEMA surfaces. Adhering platelets were stimulated by exogenously introduced thrombin and calcium ionophore A23187 20 min after platelet adherence to the polymer surfaces. Only platelets on the block copolymer surfaces showed active metabolic responses. These results suggest that adhering platelets on the microdomain structured surfaces maintain high sensitivities to external stimulation due to an intrinsic strong inhibition of platelet functional changes induced by surface contact. © 1993 John Wiley & Sons, Inc.

Poly(N-isopropyl acrylamide) (PIPAAm) demonstrated a fully expanded chain conformation below 32 degrees C and a collapsed, compact conformation at high temperatures. This unique temperature responsive polymer was grafted onto surfaces of commercial polystyrene dishes and used as temperature switches for creating hydrophilic surfaces below 32 degrees C and hydrophobic surfaces above 32 degrees C. Cell attachment and the growth of bovine endothelial cells and rat hepatocytes on PIPAAm-grafted surfaces at 37 degrees C demonstrated similar behavior to the commercialized culture dishes. Both cell types were observed to detach from the PIPAAm-grafted surface simply by reducing the temperature below the polymer transition temperature (collapse). Cells recovered by this method maintained substrate adhesivity, growth, and secretion activities nearly identical to those found in primary cultured cells in contrast to the compromised function found in cultured cells damaged by trypsinization. These results provide strong evidence that PIPAAm-grafted surfaces, as thermal switches are very effective for reversing cell attachment and detachment without cell damage. Properties of cell culture surfaces can be readily transformed by this technique reversibly into hydrophilic and hydrophobic coatings of PIPAAm-grafted polymers.

We have developed a temperature-responsive culture dish grafted with a poly(N-isopropylacrylamide) (PIPAAm). Various types of cells adhere, spread, and proliferate on the grafted dishes in the presence of serum at 37°C. By reducing only temperature, these cells can be harvested noninvasively from the dishes according to rapid hydration of the grafted polymer. Because the harvest does not need enzymatic digestion, differentiated cell phenotypes are retained. In the present study, a renal epithelial cell line, Madin-Darby canine kidney (MDCK) cell, was cultured on the dishes, and cell behavior was examined. MDCK cells showed differentiated phenotypes such as dome formation during long-term culture, similar to on ungrafted dishes. After 1-week culture at 37°C, trypsin digestion disrupted cell–cell junctions but failed to liberate cells from both ungrafted and grafted dishes. However, short-term incubation at 20°C released confluent MDCK cells as a single contiguous cell sheet only from the polymer-grafted dishes because of selective disruption of the cell-surface binding. Immunocytochemistry with anti-β-catenin antibody revealed that functional cell–cell junctions were organized even in the recovered cell sheets. Intriguingly, incubation time at 20°C required for cell sheet detachment gradually shortened during long-term culture before reducing temperature. The acceleration of cell detachment was correlated to the decrease of a single cell area by means of cell contractile force. These findings suggest that cell sheet detachment from PIPAAm-grafted dishes should be accomplished by both PIPAAm hydration and cellular metabolic activity such as cell contraction. © 2000 John Wiley & Sons, Inc. J Biomed Mater Res, 51, 216–223, 2000.

Bovine aortic endothelial cells were cultured on surfaces grafted with a temperature-responsive polymer, poly(N-isopropylacrylamide) (PIPAAm), in the presence of serum. Cells adhered, spread, proliferated, and reached confluency as observed on ungrafted tissue culture polystyrene dishes. A decrease in culture temperature released cells only from the grafted surfaces without enzymatic or ethylenediaminetetraacetic acid treatment. Upon lowering temperature, the culture surfaces changed from hydrophobic to hydrophilic owing to the hydration of grafted PIPAAm and thus weakened the cell attachment to the dishes. Released cells maintained cell-cell junctions composing monolayer cell sheets. Immunoblotting and immunofluorescence microscopy revealed that fibronectin (FN) was deposited and accumulated on the grafted surfaces during the culture. Furthermore, the deposited FN matrix adhering to cell sheets was also recovered from temperature-responsive surfaces by low-temperature treatment, while trypsin treatment destroyed the matrix. The recovery of FN by low-temperature treatment was as high as by physical scraping with a rubber blade. Temperature-responsive surfaces can provide a novel method to use cultured confluent cell sheets for tissue engineering, and also to elucidate structure and function of deposited extracellular matrix during cell culture.

The early motion and interaction of platelets on a microdomain-structured block copolymer surface composed of 2-hydroxyethyl methacrylate (HEMA)-styrene were analyzed and compared with those on a compositionally identical random copolymer, homopolymer poly (HEMA) (hydrophilic) and polystyrene (hydrophobic) surfaces. Contacting platelets were quantitatively more active, with motions including rolling, detachment, oscillatory vibration, and change of direction only on the HEMA-St block copolymer surface. Active platelet movements were observed for long time periods (>20 min) on HEMA-St block copolymer surfaces and were distinct from those for inert PSt latex particles on these same surfaces, demonstrating that platelet movements were not due to physical forces such as convection, hydrophobic interactions, or microbrownian movement. To study the cause and mechanism underlying the platelet movements, platelets treated with an adenosine triphosphate (ATP) synthesis inhibition, NaN3, or a membrane skeleton-disrupting chemical agent, dibucaine, were also studied on these surfaces. Both treatments reduced platelet movement and demonstrated that platelets in contact with the HEMA-St block copolymer surface require metabolic processes consuming ATP and involve dynamics of their membrane skeleton. These energy-consuming active movements might explain the previously observed lower platelet activation and low thrombogenicity of the HEMA-St block copolymers. Enhanced platelet movements on the HEMA-St block copolymer surface show that the microdomain surface interacts uniquely with platelets to hinder activation and preserve passive platelet function despite surface contact. © 1998 John Wiley & Sons, Inc. J. Biomed Mater Res, 42, 148–155, 1998.

Block copolymers were synthesized by a coupling reaction of hydrophilic chains of poly(2-hydroxyethyl methacrylate) (PHEMA) with hydrophobic chains of polystyrene (PSt), or poly(dimethyl siloxane) (PDMS). Microstructures of films of the block copolymers exhibited a hydrophilic-hydrophobic microphase separated structure. For evaluation of in vivo antithrombogenicity, small diameter tubes (1.5 mm I.D. and 20 cm length) coated by the copolymers on their internal surfaces were implanted in rabbits as arteriovenous shunts. Occlusion times of the tubes, measured by formation of thrombus, were three days for PHEMA, two days for PSt, and three days for PDMS. The block copolymers showed excellent antithrombogenic properties: occlusion times were 20 days for HEMA-St block copolymer and 12 days for HEMA-DMS block copolymers. In vitro examination of polymer-platelet interaction in terms of platelet adhesion and aggregation, which are important initial processes of blood coagulation, demonstrated suppressed adhesion and aggregation on microdomain surfaces constructed of hydrophilic and hydrophobic block copolymers. From both in vivo and in vitro examination, it was concluded that HEMA-St and HEMA-DMS block copolymers showed promising antithrombogenic activities by suppressing activation and aggregation of platelets.

ABA-type block copolymers composed of 2-hydroxyethyl methacrylate (HEMA), a hydrophilic monomer, and styrene (St), a hydrophobic monomer, were synthesized by the coupling reaction of telechelic oligomers used as prepolymers. These block copolymers may be represented as microphase-separated structures. It is therefore possible to change the balance between hydrophilicity and hydrophobicity in the level of an assembled order of macromolecules. In response to the relative composition of the copolymers, three typical morphological patterns were observed in electron microscopic photographs: dispersed domains of continuous St chains in the region of HEMA chains, alternate HEMA and St lamellae and finally, dispersed phases of continuous HEMA chains in the region of St chains. The effect of the hydrophilic and hydrophobic microdomains of the copolymers on the mode of interaction between polymers and platelets was studied by the microsphere column method. In the case of homopolymers and random copolymers, a significant degree of platelet adhesion and aggregation was observed. However, the degree of platelet adhesion and deformation was suppressed on the surfaces of the block copolymers containing 0.608 and 0.347 mole fractions of HEMA whose microdomains were hydrophilic-hydrophobic lamellae and isolated hydrophilic islands in hydrophobic areas, respectively. These results show that the microphase-separated structures were antithrombogenic and prevented platelet adhesion and deformation. On the basis of the results obtained, the interaction between platelets and polymer surfaces was described in terms of the effect of hydrophilic and hydrophobic microdomains.

A series of poly(2-hydroxyethyl methacrylate)/polyamine graft copolymers (HA copolymers) were examined as an adsorbent for cellular adsorption chromatography in order to separate cell populations with high efficacy. The capability of each copolymer sample to selectively adsorb rat lymphocyte subpopulations (B-cells and T-cells) was evaluated by applying a lymphocyte suspension to a copolymer-coated glass bead column. A separation factor (AB/AT) greater than 5.0 was achieved for the HA copolymer, compared to 1.9 and 1.1 for homopolymers of poly(2-hydroxyethyl methacrylate) and of a polyamine (poly(N,N-diethylaminoethylstyrene)), respectively. By loading a rat lymphocyte suspension containing B-cells (28%) and T-cells (72%) through the HA copolymer column, more than 60% of T-cells in 90% purity or more were recovered in the effluent.

Block copolymers constructed from chains of poly(2-hydroxyethyl methacrylate) (PHEMA) and either poly-ethyleneoxide (PEO) or poly-propyleneoxide (PPO) were synthesized. These block copolymers exhibited microdomain structure. Platelet adhesion on their surfaces was investigated by a column elution method to examine the effect of microdomain structure. The number of platelets adhered from whole blood was smaller for the block copolymer systems than for the homopolymers. Minimum points of platelet adhesion appeared at approximately 0.38 mol fraction of HEMA in the HEMA-PO system. Both block copolymer surfaces showed microdomains of alternate lamellar structure. Furthermore, the percent of platelets released from the column after incubation was investigated using PRP. In the case of homopolymers, released platelet percentages decreased with an increase of incubation time. Released platelet percentages from the block copolymers, however, were nearly constant with changing incubation time. These results showed that HEMA-EO and HEMA-PO block copolymers had the ability to suppress both reversible and irreversible adhesion of platelets to their respective microdomain surfaces.

Polyvinyl/polypeptide graft copolymers having microdomain structure on their surfaces were newly synthesized for the development of a specific cell separator, and the adhesion behavior of rat lymphnode lymphocytes with these materials was examined by column method. Morphologic change of lymphocytes adherent to the graft copolymers was found to be less than that of cells adherent to corresponding homopolymers, i.e., polystyrene and poly (gamma-benzyl L-glutamate). Separation of lymphocyte subpopulations (B cell and T cell) was examined in the absence of serum proteins. The adhesion selectivity for B cell was found to depend on the microdomain structure, since the highest value, 2,2, was observed for the graft copolymer with the polypeptide content of 50 wt%. Synthetic polypeptide derivatives may be promising materials which substitute for a conventional system with nylon fiber and fetal calf serum.

Block and graft copolymers consisting of poly(ether) and poly(amino acid) were synthesized, and adhesion behavior of rat lymphocytes to the surface of the film made from these copolymers was analyzed by the microsphere column method. Poly(ethylene glycol) (PEG) and poly(benzyl L-glutamate) (PBLG) were used as poly(ether) and poly(amino acid), respectively. Adhesion behavior of lymphocytes was found to depend on the content and chain length of the components in these copolymers.

The immobilization of some medically useful enzymes were studied by means of radiation-induced polymerization at -78 degrees C. Glucose oxidase and glucose peroxidase were immobilized in the form of thin membranes inside polyvinyl chloride tubes and on polyethylene films; these membranes showed considerable activity yield, as well as good activity retention. Two effective methods were adopted to improve the surface properties of the base materials and to facilitate firm immobilization by coating: that is, an undercoating method followed by radiation curing of the undercoating and an irradiation grafting method with a monomer. Both were tested with good results. An immobilization of urokinase was also carried out successfully by similar methods. The thrombogenicity of the immobilized urokinase showed a remarkable effect on thombus formation.

The relationship between microstructure and platelet adhesivity of six types of poly(propylene oxide) (PPO)-segmented polyamides based on the polyamide segments nylon 210, 310, 410, 510, 610, and 710 were investigated. These multiblock PPO-segmented copolymers were prepared by interfacial polycondensation. Physical characterization of these copolymers was by means of thermal analysis, transmission electron microscope, wide-angle X-ray diffraction (WAXD), and small-angle X-ray scattering (SAXS). The WAXD and SAXS measurements showed that the copolymers had microstructures containing crystalline and amorphous phases and that these microstructures, represented by means of crystallite thickness and long period, varied with incorporation of PPO segments. Blood compatibility of these copolymers was evaluated by estimating the amount of adhering platelets on the copolymer surfaces. The amount of adhering platelets was minimum for the surfaces of the copolymers having a crystallite thickness of 6.0-6.5 nm and a long period of 12-13 nm. This result suggests that the particular size and distribution of the crystalline and amorphous phases in the copolymer could be determining factors for suppressing platelet adhesion on the copolymer surface, and that the control of these factors could lead to ideal antithrombogenic polymers.