Search

Evaluation of the petrophysical parameters in Uzot-field was carried out using Well log data. The target for this study was the D3100 reservoir sand of wells Uz 004, Uz 005, U008 and Uz 011 with depth range of 5540ft to 5800ft across the four wells. Resistivity logs were used to identify hydrocarbon or water-bearing zones and hence indicate permeable zones while the various sand bodies were then identified using the gamma ray logs. The results showed the delineated reservoir units having porosity ranging from 21.40% to 33.80% indicating a suitable reservoir quality; permeability values from 1314md to 18089md attributed to the well sorted nature of the sands and hydrocarbon saturation range from 12.00% to 85.79% implying high hydrocarbon production. These results suggest a reservoir system whose performance is considered satisfactory for hydrocarbon production. [ABSTRACT FROM AUTHOR]

Structural interpretation of 3-D seismic data and well log have been applied to unravel hydrocarbon entrapment pattern and petrophysical parameters of X-field within the coastal swamp region of the Niger Delta.. Four reservoir intervals (A, B, C and D) delineated as (W-026, 032, 042 and 048) using gamma ray and resistivity log response. Structural interpretation for inline 5158 revealed four horizons (A, B, C and D) and eight (8) faults labelled (F1, F2, F12, F13, F21, F22, F23, and F24) were mapped. It was observed that the hanging wall block due to reverse drag or rollover anticline slided over fault F12 and created fault F2, thereby creating subsidence where sediments can be deposited. Therefore, faults F2 and F12 created rollover structures which cuts across the entire four reservoirs and invaluably responsible for trapping of hydrocarbon in the field. RMS map developed for horizons 'A' and 'B' revealed high amplitude anomalies, while variance attribute for both horizons showed relatively uniform lithology observed from east to west across the study area. While from north-east to south west, variance was observed to increase relatively which indicates different lithology. These trend exposes dipping of the channel fill at both flanks by creating extensive faulting. Results of petrophysical evaluation for reservoirs 'A' and 'B' across the four wells were analyzed. For reservoir 'A', porosity values of 32.8%, 24.8%, 25.9% and 27.1% were obtained for wells W-048, 042, 026 and 032 respectively with an average of 27.65%, while for reservoir 'B' porosity values of 26.83%, 26.93%, 25.59% and 27.99% for wells W-048, 042, 026 and 032 were obtained respectively with an average of 26.84%. This porosity values were rated very good to excellent for reservoir 'A' and very good for reservoir 'B', while Permeability values of the order (K > 1000mD) were obtained for both reservoirs across the four wells and is rated excellent. Hydrocarbon saturation (Shc) across the four wells averages at 68.57% for reservoir 'A' and 68.67% for reservoir 'B' which is high. Log motifs using gamma ray log for well-026 was integrated with seismic facies to infer on depositional environment of the reservoirs horizons showed a combination of serrated funnel/blocky shape log response and coarsening upward cycles. For reservoirs 'A', 'B' and 'C' the log shape pattern indicates deposition in a fluvial / tidal, channel environment while for reservoir 'D' the pattern indicates deposition in deltaic front environment. Isochore maps computed for horizons 'A' and 'B', shows that horizon 'A' is relatively thick and this pattern suggests increased tectonic activities during deposition of reservoir 'A' and is an indication that reservoir 'A' is a synrift deposit. [ABSTRACT FROM AUTHOR]

This paper presents a simple mathematical algorithm or procedure for computing the uncertainties at the various percent of data input, using the stochastic approach of simulating the input variables to compute the output variables. A simple algorithm was used to derive stochastic equations for some selected petrophysical parameters using the relative standard deviations techniques (σ). These equations also known as reference work equations were found to produce reasonably accepted magnitude of uncertainties in the different parameters associated with cores. Equations were derived for the percent uncertainties in the values of the pore volume of the core - Vp, the fluid saturation - Sw, Sor, the porosity of the core - Φ, formation factor - F, bulk density - ρB, the derived porosity - ΦL and the derived permeability - KBU, Kro, Krw. The uncertainty equations can also be used to define the maximum level of uncertainty that can be tolerated in any independent variable if the maximum uncertainty to be tolerated in the dependent variable is known. [ABSTRACT FROM AUTHOR]