Search

To be able to produce highly oriented and strong fibers from polymer solutions, a high elongational rate during the fiber-forming process is necessary. In the air-gap spinning process, a high elongational rate is realized by employing a high draw ratio, the ratio between take-up and extrusion velocity. Air-gap spinning of lignin–cellulose ionic-liquid solutions renders fibers that are promising to use as carbon fiber precursors. To further improve their mechanical properties, the polymer orientation should be maximized. However, achieving high draw ratios is limited by spinning instabilities that occur at high elongational rates. The aim of this experimental study is to understand the link between solution properties and the critical draw ratio during air-gap spinning. A maximum critical draw ratio with respect to temperature is found. Two mechanisms that limit the critical draw ratio are proposed, cohesive breach and draw resonance, the latter identified from high-speed videos. The two mechanisms clearly correlate with different temperature regions. The results from this work are not only of value for future work within the studied system but also for the design of air-gap spinning processes in general.

The aim of this study was to examine the properties of polyester nanofibers produced by the electrospinning method. Solvent-spun nanofibers with different concentrations of poly(ethylene terephthalate) (13, 16, and 20 wt %) were produced. The morphology and surface energy of the fibers were analyzed by scanning electron microscopy and contact angle measurements. Tensile testing, dynamic mechanical analysis, and differential scanning calorimetry were carried out to characterize the thermal and mechanical properties. X-ray diffraction and attenuated total reflection Fourier transform infrared spectroscopy tests were performed to analyze the microstructural properties. The results show that a nanoweb of the 16 wt % solution had better mechanical and thermal behaviors because of the increased molecular orientation in the amorphous structure and the narrower fiber diameter distribution in the web. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011

Poly(lactic acid) (PLA) fibers of submicron sizes encapsulating allyl isothiocyanate (AITC) (PfA) were made and electrospun onto the surfaces of PLA films. SEM examination confirmed the fusion of the two phases to form a bilayered fiber-grafted film after the film underwent air blowing and water washing to remove the nongrafted fibers. The fiber-grafted PLA films (PfA-g-film) retain the mechanical properties of PLA. The release of AITC from the fibers was temperature dependent. At temperatures lower than 4°C, the incorporated AITC remained within the fibers without losing activity; at room temperature, AITC released in a sustained manner over weeks. The release of AITC was also dependent on its initial concentration in the PLA electrospinning solution; samples with more AITC incorporated showed a higher release rate. PfA-g-films significantly inhibited the growth of Listeria innocua and Escherichia coli k12 when tested on package foods. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 42475.

Functional nylon 6,6 nanofibers incorporating cyclodextrins (CD) were developed via electrospinning. Enhanced thermal stability of the nylon 6,6/CD nanofibers was observed due to interaction between CD and nylon 6,6. X-ray photoelectron spectros- copy and attenuated total reflectance Fourier transform infrared spectroscopy studies indicated the existence of some CD molecules on the surface of the nanofibers. Electrospun nylon 6,6 nanofibers without having CD were ineffective for entrapment of toluene vapor from the environment, whereas nylon 6,6/CD nanofibrous membranes can effectively entrap toluene vapor from the surround- ing by taking advantage of the high surface-volume ratio of nanofibers with the added advantage of inclusion complexation capability of CD presenting on the nanofiber surface. The modeling studies for formation of inclusion complex between CD and toluene were also performed by using ab initio techniques. Our results suggest that nylon 6,6/CD nanofibrous membranes may have potential to be used as air filters for the removal of organic vapor waste from surroundings. V C 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41941.

The incorporation of carbon nanotubes to thermoplastic fibers can potentially improve mechanical, thermal and electrical properties. In this article, a methodology to tailor the mechanical properties of carbon nanotube/nylon fibers is presented. Multiwalled nanotubes (MWNT) were combined to polyamide 12 through melt compounding and twin-screw extrusion. Pellets containing between 0 and 5.0 wt % MWNT were extruded and subsequently melt spun with a capillary rheometer to produce filaments. To further promote the alignment of the polymer chains and MWNTs, postdrawing parameters were systematically investigated: temperature, drawing speed and elongation. The best improvements in terms of elastic modulus and yield strength were measured at 140°C and 500% elongation, whereas drawing speed was shown to have a negligible effect. It was confirmed through electron microscopy and X-ray diffraction that these enhancements were mainly induced by the alignment of the polymer chains along the fibers' axis. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4375–4382, 2013