Search

In single-pole heads with a pole tip cross section trimmed down to 1003200 nm by focused ion beam, the remanence of the head becomes nonzero if the pole length is too high. Large-scale three-dimensional micromagnetic simulations are performed to understand this effect, and to calculate the critical length of the pole as a function of the pole tip cross section.

A novel method for fast information retrieval from a probe storage device is considered. It is shown that information can be stored and retrieved using the optical diffraction patterns obtained by the illumination of a large array of cantilevers by a monochromatic light source. In thermo-mechanical probe storage, the information is stored as a sequence of indentations on the polymer medium. To retrieve the information, the array of probes is actuated by applying a bending force to the cantilevers. Probes positioned over indentations experience deflection by the depth of the indentation, probes over the flat media remain un-deflected. Thus the array of actuated probes can be viewed as an irregular optical grating, which creates a data-dependent diffraction pattern when illuminated by laser light. We develop a low complexity modulation scheme, which allows the extraction of information stored in the pattern of indentations on the media from Fourier coefficients of the intensity of the diffraction pattern. We then derive a low-complexity maximum likelihood sequence detection algorithm for retrieving the user information from the Fourier coefficients. The derivation of both the modulation and the detection schemes is based on the Fraunhofer formula for data-dependent diffraction patterns. We show that for as long as the Fresnel number F, 14 pages, 11 figures. Version 2: minor misprints corrected, experimental section expanded

Obtaining an accurate profile of the spatial sensitivity of Hall cross structures is crucial if such devices are to be used to analyze the switching behavior of magnetic nanostructures and determine the switching field distribution of bit patterned media. Here, we have used the anomalous Hall effect to investigate the switching of patterned Co/Pt multilayer magnetic nanoislands, where the Hall cross has been integrated into the Pt seed layer. Using the anomalous Hall output voltage we have observed the magnetic switching of individual islands, allowing the spatial sensitivity across a Hall cross structure to be determined. The experimental results agree well with numerical simulation studies, using a three-dimensional finite element model, and with existing theoretical studies, where the spatial sensitivity of two-dimensional Hall cross structures have been found numerically.

We characterized a method of heat-assisted magnetic recording, which is potentially suitable for probe-based storage systems. The field emission current from a scanning tunneling microscope tip was used as the heating source. Various pulse voltages were applied to two types of CoNi/Pt multilayered films: one is strongly coupled with low coercivity, and the other is weakly coupled with high coercivity. Experimental results show that marks achieved in strongly coupled medium are larger than that in granular one. An external magnetic field was then applied to those marks. For weak fields (lower than the coercivity of the medium) the size of marks changes distinctly in the strongly coupled medium but not in the granular one. A model of magnetic domain dynamics is built to quantitatively explain the experimental results. It agrees with experiments. Based on this model, we will be able to figure out the proposals to achieve small marks for ultrahigh recording density. © 2006 American Institute of Physics.