Search

A transmission line is discussed for application in an underwater spark-discharge technique in the cleaning of a horizontal well by incorporating a power-transmission model into the simulation. The pulsed-spark-discharge technique has been proposed for clogged-well rehabilitation, because it removes incrustations that are attached to well screens by using strong pressure waves that are generated by the rapid expansion of a spark channel. To apply the pulsed-spark-discharge technique to the cleaning of horizontal wells, the coaxial cable between the pulsed power supply and the spark gap as a load needs to be extended to a few hundred meters. Prior to field application, pulsed-spark-discharge experiments were conducted and the role of the transmission line was examined using an improved simulation model. In the model, a non-linear interaction of the spark channel and the capacitor bank is described by the pulse-forming action of the coaxial cable. Based on the accurate physical properties of the water plasma, such as the equation of state and electrical conductivity within the region of interest, the amount of energy contributed to the development of a shock wave was evaluated. The simulation shows that if the initial conditions of the spark channel are the same, no further reduction in strength of the pressure wave occurs, even if the cable length is increased above 50 m. Hence, the degraded peak pressure that was observed in the experiments using the longer cable is attributed to a change in the initial condition of the spark channel. The parametric study suggests that the low initial charging voltage, the high ambient water pressure, and the long cable length yield the low initial spark-channel density, which results in a reduced peak pressure. The simulation of line charging is presented to discuss the principle of disturbing the pre-breakdown process by an extended cable. [ABSTRACT FROM AUTHOR]

This paper presents a simple but quite accurate numerical model for analyzing electrical explosion of copper wires in water. The numerical model solves a circuit equation coupled with one-dimensional magneto-hydrodynamic (MHD) equations with the help of appropriate wide-range equation of state (EOS) and electrical conductivity for copper. The MHD equations are formulated in a Lagrangian form to identify the interface between the wire and surrounding water clearly. A quotidian EOS (QEOS) that is known as the simplest form of EOS is utilized to build wide-range EOS for copper. In the QEOS, we consider the liquid-vapor phase transition, which is critical in analyzing the wire explosion system. For the electrical conductivity of copper, a semi-empirical set of equations covering from solid state to partially ionized plasma state are employed. Experimental validation has been performed with copper wires of various diameters, which are exploded by a microsecond timescale pulsed capacitive discharge. The simulation results show excellent agreements with the experimental results in terms of temporal motions of a plasma channel boundary and a shock front as well as current and voltage waveforms. It is found that the wire explodes (vaporizes) along the liquid branch of a binodal curve irrespective of wire dimension and operating voltage. After the explosion, the wire becomes a plasma state right away or after the current pause (dwell), depending on the operating conditions. It is worth noting that such a peculiar characteristic of wire explosion, i.e., current pause and restrike, is well simulated with the present numerical model. In particular, it is shown that the wire cools down along the vapor branch of the binodal curve during the current dwell, due to a significant difference of thermodynamic characteristics across the binodal curve. The influence of radiation for studying nonideal plasmas with a wire explosion technique and a physical process for shock wave formation by an exploding wire is discussed as well. [ABSTRACT FROM AUTHOR]

Nanospheres of perovskite manganite La0.7Ca0.3MnO3 (LCMO) were prepared using porous carbon replica as a template. Close-packed arrays of silica spheres were infiltrated with a sucrose solution, which was then carbonized. After removal of the silica template, pores in the replica were filled with metal acetate precursors. The filled replica was sintered at 800 °C. The resulting hollow LCMO nanospheres were characterized by magnetization, electrical transport, scanning electron microscope, and transmission electron microscope measurements. The magnetization data of LCMO show a ferromagnetic transition near 250 K. © 2004 American Institute of Physics. [ABSTRACT FROM AUTHOR]

Investigates the formation on titanium silicides on silicon implanted with different boron-fluorine dosages. Use of secondary ion mass spectrometry and transmission electron microscopy measurements; Effect of residual oxides on the silicide formation; Impurity distribution profiles of silicon samples implanted with fluence of boron-fluorine.

Focuses on a study which developed a material for thermally stable self-aligned silicide technologies using sequentially deposited titanium/tantalum on polycrystalline silicon. Benefits of smaller integrated-circuit dimensions; Significance of nitrogen on the stability of semiconductor structures; Factors influencing the critical temperature of recrystallization.