Search

The luminescence properties of InGaN/GaN multiple-quantum-well light-emitting diodes (LEDs) with different quantum-well (QW) thicknesses were investigated. It is found that with decreasing the QW thicknesses, the integrated intensities of the photoluminescence (PL) and electroluminescence (EL) peaks demonstrate a contrary changing trend. The PL results show that the luminescence efficiency is improved by using thinner QWs. However, in the EL process, such a positive effect is counteracted by the low carrier injection efficiency in the thin QW LEDs, and consequently leads to a lower light output. Based on our experimental results, it is inferred that the tunneling leakage current associated with dislocations should be responsible for the low carrier-injection efficiency and the observed weaker EL integrated intensity of the LEDs with thin QWs. [ABSTRACT FROM AUTHOR]

An advanced three-dimensional electrothermal-coupled simulation model basing on finite-element method numerical simulation is developed to study the electrical and thermal properties of chip-level high-power GaN-based light-emitting diodes (LEDs). The current spreading, heat generation, and transfer in the device are comprehensively considered in this model. The current-spreading effect of the transparent current-spreading layer and the thermal performance of LEDs with interdigitated-electrodes are investigated. The simulation results prove that the temperature distribution in the active layer is strongly affected by the electrode pattern. The obvious heat accumulation in LEDs with conventional interdigitated-electrode patterns can be seen both in the simulated results and the infrared measured results. The heat transfer efficiency can be improved by using a symmetry electrode pattern design. The thermal management of the bump configurations in flip-chip LEDs is also studied. A more reasonable and thermal effective bump configuration is presented, and the simulated results show that a lower average temperature and more uniform heat distribution in the chips can be obtained. [ABSTRACT FROM AUTHOR]