Search

The effect of thermal treatments in nitrogen-diluted oxygen on the structural characteristics of 2-D arrays of Si nanocrystals (NCs) fabricated by ultralow energy ion implantation in thin silicon dioxide layers is studied. The study reveals that the NC mean size, density, and surface fraction decrease with annealing duration while oxidation rate of the NCs slows down with time and stabilizes after 1 hour of annealing.

We analyze a method to selectively grow straight, vertical gallium nitride nanowires by plasma-assisted molecular beam epitaxy (MBE) at sites specified by a silicon oxide mask, which is thermally grown on silicon (111) substrates and patterned by electron-beam lithography and reactive-ion etching. The investigated method requires only one single molecular beam epitaxy MBE growth process, i.e., the SiO2 mask is formed on silicon instead of on a previously grown GaN or AlN buffer layer. We present a systematic and analytical study involving various mask patterns, characterization by scanning electron microscopy, transmission electron microscopy, and photoluminescence spectroscopy, as well as numerical simulations, to evaluate how the dimensions (window diameter and spacing) of the mask affect the distribution of the nanowires, their morphology, and alignment, as well as their photonic properties. Capabilities and limitations for this method of selective-area growth of nanowires have been identified. A window diameter less than 50 nm and a window spacing larger than 500 nm can provide single nanowire nucleation in nearly all mask windows. The results are consistent with a Ga diffusion length on the silicon dioxide surface in the order of approximately 1 μm. [ABSTRACT FROM AUTHOR]

The SOI separation caused by implanted oxygen (SIMOX) oxide is characterized by a new method, based on the principle that buried oxide is polarized by the application of bias in the structure's substrate. The rate window technique is used in the monitoring of the induced current transients in the Si film. The relaxation process is thermally activated with the time constants. The high metal concentration of the oxide cause the occurrence of the strange properties of the SIMOX oxide.

The effect of thermal treatments in nitrogen-diluted oxygen on the structural characteristics of two-dimensional arrays of Si nanocrystals (NCs) fabricated by ultralow-energy ion implantation (1 keV) in thin silicon dioxide layers is reported. The NC characteristics (size, density, and coverage) have been measured by spatially resolved electron-energy-loss spectroscopy by using the spectrum-imaging mode of a scanning transmission electron microscope. Their evolution has been studied as a function of thermal treatment duration at a temperature (900 °C) below the SiO2 viscoelastic point. An extended spherical Deal-Grove [J. Appl. Phys. 36, 3770 (1965)] model for self-limiting oxidation of embedded silicon NCs has been carried out. It proposes that the stress effects, due to oxide deformation, slow down the NC oxidation rate and lead to a self-limiting oxide growth. The model predictions show a good agreement with the experimental results. Soft oxidation appears to be a powerful way for manipulating the NC size distribution and surface density. [ABSTRACT FROM AUTHOR]

In silicon nanocrystal based metal-oxide-semiconductor memory structures, tuning of the electron tunneling distance between the Si substrate and Si nanocrystals located in the gate oxide is a crucial requirement for the pinpointing of optimal device architectures. In this work it is demonstrated that this tuning of the" injection distance" can be achieved by varying the Si+ ion energy or the oxide thickness during the fabrication of Si nanocrystals by ultralow-energy silicon implantation. Using an accurate cross-section transmission electron microscopy (XTEM) method, it is demonstrated that two-dimensional arrays of Si nanocrystals cannot be positioned closer than 5 nm to the channel by increasing the implantation energy. It is shown that injection distances down to much smaller values (2 nm) can be achieved only by decreasing the nominal thickness of the gate oxide. Depth profiles of excess silicon measured by time-of-flight secondary ion mass spectroscopy and Si nanocrystal locations determined by XTEM are compared with Monte-Carlo simulations of the implanted Si profiles taking into account dynamic target changes due to ion implantation, ion erosion, and ion beam mixing. This combination of experimental and theoretical studies gives a safe explanation regarding the unique technological route of obtaining Si nanocrystals at distances smaller than 5 nm from the channel: the formation of nanocrystals requires that the interface mixing due to collisional damage does not overlap with the range profile to the extent that there is no more a local maximum of Si excess buried in the SiO 2 layer. [ABSTRACT FROM AUTHOR]

We demonstrate a nonvolatile electrically erasable programmable read-only memory device using gold nanoparticles as charge storage elements deposited at room temperature by chemical processing. The nanoparticles are deposited over a thermal silicon dioxide layer that insulates them from the device silicon channel. An organic insulator deposited by the Langmuir–Blodget technique at room temperature separates the aluminum gate electrode from the nanoparticles. The device exhibits significant threshold voltage shifts after application of low-voltage pulses (<=±6 V) to the gate and has nonvolatile retention time characteristics. © 2003 American Institute of Physics. [ABSTRACT FROM AUTHOR]

The tuning of Injection distance achieved by varying the Si (sub +) ion energy or the oxide thickness during fabrication of Si nanocrystals by ultra low-energy silicon implantation is demonstrated. The influence of ion energy and nominal SiO (sub 2) thickness on the depth position of NSC obtained by low energy ion beam synthesis is explored.