Search

A novel interfacial resistance-free (IRF) bifunctional camouflage (transparent and invisible) device is proposed in this paper. The thermal and electric conductivities of the shell and background are the same to eliminate the interfacial resistance. The IRF bifunctional camouflage device can operate in thermal–electric fields based on the neutral inclusion method. The distribution of isotherm and equipotential lines are studied quantitatively by the simulations. It is confirmed that the IRF bifunctional camouflage device with arbitrary natural materials can effectively achieve not only the invisible function but also the transparent function in thermal–electric fields. This method provides a window to the realization of bifunctions and the development of multi-physics fields. [ABSTRACT FROM AUTHOR]

Thermally stimulated discharge (TSD) technique is a traditional method in dielectric research, especially for electrets. However, in conventional open-circuit and short-circuit TSD techniques, it is difficult to distinguish the surface charge and body charge of dielectric materials. In particular with the test of polymer electrets, the deformation of the polymer film may take place during the measurement process, which will affect the accuracy of the experiment results. In this paper, a glass-assisting TSD (GA-TSD) technique is proposed to solve the above problems. The feasibility of the experimental technique is verified with the GA-TSD spectra of fluorinated ethylene-propylene copolymer electret films. In addition, their theory analysis is also accomplished. The influences of glass thickness, glass dielectric property, and metallizing on the glass on GA-TSD spectra are investigated. The results prove that the GA-TSD spectra can clearly distinguish the difference between surface charge and body charge according to the current direction. The quartz glass with the lowest dielectric constant is best suitable for the GA-TSD technique. The influence of the glass thickness and metallizing on the glass on GA-TSD spectra is little. [ABSTRACT FROM AUTHOR]

Ferroelectricity in hafnium zirconium oxide (Hf1 − xZrxO2) and the factors that impact it have been a popular research topic since its discovery in 2011. Although the general trends are known, the interactions between fabrication parameters and their effect on the ferroelectricity of Hf1 − xZrxO2 require further investigation. In this paper, we present a statistical study and a model that relates Zr concentration (x), film thickness (tf), and annealing temperature (Ta) with the remanent polarization (Pr) in tungsten (W)-capped Hf1 − xZrxO2. This work involved the fabrication and characterization of 36 samples containing multiple sets of metal-ferroelectric-metal capacitors while varying x (0.26, 0.48, and 0.57), tf (10 and 19 nm), and Ta (300, 400, 500, and 600 ° C). In addition to the well-understood effects of x and Ta on the ferroelectricity of Hf1 − xZrxO2, the statistical analysis showed that thicker Hf1 − xZrxO2 films or films with higher x require lower Ta to crystallize and demonstrated that there is no statistical difference between samples annealed to 500 and 600 ° C, thus suggesting that most films fully crystallize with Ta ∼ 500 ° C for 60 s. Our model explains 95% of the variability in the Pr data for the films fabricated, presents the estimates of the phase composition of the film, and provides a starting point for selecting fabrication parameters when a specific Pr is desired. [ABSTRACT FROM AUTHOR]

In this paper, a new Stroh formalism for gradient electro-mechanics is derived for the first time, which is both mathematically concise and numerically powerful, applicable to generally coupled anisotropic material systems. Based on this new formalism, the complicated Lamb wave in flexoelectric and piezoelectric plates is investigated. The dispersion equation is obtained by solving the eigenvalue problem along with the unconditionally stable dual-variable and position method. From the obtained dispersion equation, the dispersion curves and mode shapes of the Lamb wave are calculated by the 1D form of the multidimensional moduli ratio convergence method. Two important and interesting features are observed from our analysis: One is the difference in the mode shape symmetry between the piezoelectric and flexoelectric cases, and the other is the size-dependent property of the flexoelectric effect as observed by nondimensionalization. These features are further illustrated by comparing the dispersion curves and wave-mode shapes among the three different material models (purely piezoelectric, purely flexoelectric, and flexoelectric and piezoelectric coupled). The newly derived Stroh formalism offers a robust, concise, and unified approach for dealing with strain gradient electro-mechanic materials with crystal systems of general anisotropy. The present work also explains the physical mechanism of symmetry breaking observed, as induced by flexoelectric coupling in piezoelectric materials. [ABSTRACT FROM AUTHOR]

The article presents the study of the magnetocaloric effect (MCE) for the rhombohedral Laves phase of Pr 2 Rh 3 Ge, which shows a magnetic order below T C = 8.5 K. We have established that the compound exhibits a continuous second-order type of transition which was demonstrated and confirmed by several different techniques, mainly by analyzing universal curves of normalized entropy change as a function of scaled temperature. The observed MCE, in our opinion, is a consequence of an indirect exchange coupling between the magnetic sublattices of the rare earth ions, which, however, does not exclude the potential contribution of sublattice-containing transition metals. In this paper, the procedure to evaluate the MCE from magnetization and specific heat data is described. As a result, important parameters such as the isothermal magnetic entropy change (Δ S M), adiabatic temperature change (Δ T a d ), relative cooling power (RCP), and the temperature averaged entropy change (TEC) were determined. The highest values of − Δ S M , Δ T a d , and RCP for a field change (Δ μ 0 H) of 5 T at T C are 5.96 J/kg K, 3.87 K, and 72.62 J/kg, respectively. These results obtained for Pr 2 Rh 3 Ge seem to be, however, low compared to the values obtained for the rhombohedral Laves phases, belonging to the group of ternary germanides RE 2 Rh 3 Ge containing heavy rare earth metals (RE = Gd, Tb, Ho, and Er). Nevertheless, we believe that the results presented in this work extend and complement the current knowledge on the magnetocaloric properties of this family of materials. [ABSTRACT FROM AUTHOR]

In this paper, a wideband metasurface-loaded (MTS-L) rectenna system is proposed to capture electromagnetic (EM) energy at arbitrary azimuth angles. The radiation patterns of different modes in the original MTS configuration are analyzed using the characteristic mode theory, and potential modes with omnidirectional radiation are screened out. By the arrangement of patches, the roundness performance of the radiation pattern can be ameliorated, and the omnidirectional characteristic is obtained over a wide frequency band. Subsequently, the surface current density of the selected mode is carefully and artificially designed to facilitate probe excitation as well as refrain from introducing complex power-combining networks. A wideband rectifier circuit is designed as the load of the proposed antenna. Eventually, measured results show that it operates from 4.6 to 9.6 GHz with a fractional bandwidth of 70.4%, and the peak system efficiency is 52.2%. The proposed system demonstrates excellent potential for wireless power transmission and EM energy harvesting in indoor environments. [ABSTRACT FROM AUTHOR]

Optical second harmonic generation (SHG) can be employed to characterize the passivation quality of semiconducting material interfaces. The interface electric field (EDC) related to the existing charges at and near the interface, including the fixed oxide charges Qox, gives rise to the electric field induced second harmonic phenomenon. In this paper, we calibrate the SHG response for EDC measurement, using Al2O3/SiO2/Si(100) samples with different Qox. To perform this calibration, SHG and capacitance-voltage measurements (to access the electrical field of the samples) were made. The experimental results match well the simulated calibration curve, proving the potential of the SHG as stand-alone characterization technique for dielectric stacks on Si. [ABSTRACT FROM AUTHOR]

Electroporation is a complex, iterative, and nonlinear phenomenon often studied through numerical simulations. In recent years, simulations of tissue electroporation have been conducted with static models. However, the results of a static model simulation are restricted to a fixed protocol signature of the pulsed electric field. In this paper, we describe a novel dynamic model of tissue electroporation that also accounts for tissue dispersion and temperature to allow time-domain simulations. We have implemented the biological dispersion of potato tubers and thermal analysis in a commercial finite-element method software. A cell electroporation model was adapted to account for the increase in tissue conductivity. The model yielded 12 parameters divided into three dynamic states of electroporation. The thermal analysis describes the dependence of tissue conductivity on temperature. The model parameters were evaluated using experiments with vegetal tissue (Solanum tuberosum) under electrochemotherapy protocols. The proposed model can accurately predict the conductivity of tissue under electroporation from 100 to 1000 V/cm. A negligible thermal effect was observed at 1000 V/cm, with a temperature increase of 0.89 ° C. We believe that the proposed model is suitable to describe the electroporation at the tissue level and provides a hint of the effects on the cell membrane. [ABSTRACT FROM AUTHOR]

Numerical methods for analyzing diffusion phenomena involving strong discontinuities and complicated interfaces are of great scientific and technical importance. In this paper, we extend the existing step-balanced random walk, which overcomes the problem of detailed balance of a random walker in three-dimensional (3D), diffusion-tensor discontinuous systems, to particle density (ρ) discontinuous systems, and introduce volumetric heat capacity C and temperature T by considering ρ as heat density, i.e., ρ = C T , to apply it to thermal problems. Two types of thermophysical simulations are demonstrated: one is steady-state heat flow due to a temperature difference at the end surfaces on a two-phase slab model unit cell with periodic boundary conditions; the other is the time variation of temperature distribution due to heat diffusion from a point heat source in a repeated two-phase slab model with no periodic boundary conditions. We see the correct behavior of heat and temperature expected in 3D discontinuous systems composed of two phases with anisotropic thermal conductivity. The applicability to problems other than pure diffusion and the limitations of the method are also discussed. [ABSTRACT FROM AUTHOR]

Spin–orbit torque (SOT) can provide efficient electrical manipulation of magnetism via applying electrical current to breaking the symmetry of damping-like torque. In the heterojunction of heavy and ferromagnetic metal, Dzyaloshinskii–Moriya interaction (DMI) is one of the key ingredients for stabilizing chiral spin structures, like chiral domain walls. Meanwhile, materials with larger charge-spin conversion rates are also highly expected for the efficient SOT. In this paper, spin–orbit torque magnetic switching is observed in the perpendicularly magnetized Pt/Co/Bi2Se3 and shows relatively high efficiency with low critical switching current density of about 5 × 105 A cm−2. The SOT efficiency and DMI in perpendicularly magnetized Pt/Co/Bi2Se3 were quantitatively investigated by electrical detection of the effective spin Hall field. The DMI constant is about 2.6 mJ m−2, and the effective spin Hall angle of Pt/Co/Bi2Se3 is about 0.14. The work also demonstrates that the Bi2Se3 layer takes the main responsibility for SOT, and the Pt/Co interface is the main source of DMI in Pt/Co/Bi2Se3 structures, which makes it possible to achieve independent optimization of DMI and SOT in the Pt/Co/Bi2Se3 structure at room temperature for the advanced application of spintronic devices. [ABSTRACT FROM AUTHOR]

Crossed-Field Vacuum Electron Devices are ubiquitous in the High-Power Microwave field in either an oscillator/source or amplifier variant. A typical configuration consists of a magnetically insulated laminar electron flow in an anode–cathode gap with crossed electric (∝ V , voltage) and magnetic (B-) fields and a series of open resonant cavities/vanes located on the anode block that serve as a slow-wave structure (SWS). The SWS slows the phase velocity of the electromagnetic signal down so that the wave becomes synchronous with a layer of the electron flow but is often neglected when calculating the Hull magnetic field necessary to insulate the electrons. In particular, the guiding design equation for the critical cutoff B-field assumes a smooth anode wall. In this paper, we show that such an assumption severely narrows the operating regime in B–V space and that upon inclusion of a revised Hull Cutoff condition taking into account the SWS, operation at lower B and higher V is possible. This revised Hull Cutoff criterion for magnetic insulation in crossed-field devices is corroborated by Particle-in-Cell simulations using CST Particle Studio. [ABSTRACT FROM AUTHOR]

This paper utilizes a coupled chemomechanical model that integrates chemical reactions, diffusion, and mechanical deformation to describe the high-temperature interfacial reactions and stress evolution within an enamel coating/Ni-based super-alloy system. Through finite element simulation, we conduct a comprehensive analysis of multiple reactions and processes at the interface. Experimental characterization of the concentration distribution of various elements is employed to verify the accuracy of the proposed chemomechanical model. Additionally, the simulation reveals that the interface region experiences compressive circumferential stress, which can potentially lead to interfacial failure due to buckling. On the other hand, the enamel coating undergoes tensile circumferential stress, resulting in the formation of vertical surface cracks. These findings hold practical implications for the development of advanced coatings with enhanced durability and performance. Future research can further optimize coating design and enhance the reliability of high-temperature applications based on these results. [ABSTRACT FROM AUTHOR]

Quantum random number generators (QRNGs) produce random numbers based on the intrinsic probabilistic nature of quantum mechanics, making them true random number generators. In this paper, we design and fabricate an embedded QRNG that produces random numbers based on fluctuations of spontaneous emission and absorption in a light-emitting diode. To achieve a robust and reliable QRNG, we compare some usual post-processing methods and select the finite impulse response method for a real-time device. This device could pass the National Institute of Standards and Technology tests, the generation rate is 1 Mbit/s, and the randomness of the output data is invariant in time. [ABSTRACT FROM AUTHOR]

This paper introduces a versatile design method for reconfigurable metasurfaces based on the Pancharatnam–Berry phase theory. Unlike traditional reconfigurable metasurfaces that require designing independent surfaces for specific applications, leading to a significant time investment for designers to learn and create, this study proposes a foundational, invariant metasurface. By selectively metallizing holes or inserting metal cylinders, it achieves nine available functionalities. Regardless of the chosen operating function, the metasurface demonstrates high efficiency at 8.2 GHz, with amplitude loss less than 1 dB. Additionally, when operating in phase modulation mode, the design provides a 360 ° phase adjustment range and a 30 ° phase step. A prototype containing 31 × 31 units (425.6 × 425.6 mm 2) has been fabricated and tested under function 7 (TM and RHCP transmission phase modulation). Measurement results confirm the metasurface's capability for polarization conversion and phase modulation at the frequency of 8.2 GHz. [ABSTRACT FROM AUTHOR]

Ion-induced electron emission (IIEE) is an important process whereby ions impinging on a material surface lead to net emission of electrons into the vacuum. While relevant for multiple applications, IIEE is a critical process of electric thruster (ET) operation and testing for space propulsion, and, as such, it must be carefully quantified for safe and reliable ET performance. IIEE is a complex physical phenomenon, which involves a number of ion-material and ion-electron processes, and is a complex function of ion mass, energy, and angle, as well as host material properties, such as mass and electronic structure. In this paper, we develop a discrete model of kinetic IIEE to gain a more accurate picture of the electric thruster chamber and facility material degradation processes. The model is based on three main developments: (i) the use of modern electronic and nuclear stopping databases, (ii) the use of the stopping and range of ions in matter to track all ion and recoil trajectories inside the target material, and (iii) the use of a scattering Monte Carlo approach to track the trajectories of all mobilized electrons from the point of first energy transfer until full thermalization or escape. This represents a substantial advantage in terms of physical accuracy over existing semi-analytical models commonly used to calculate kinetic IIEE. We apply the model to Ar, Kr, and Xe irradiation of W and Fe surfaces and calculate excitation spectra as a function of ion depth, energy, and angle of incidence. We also obtain minimum threshold ion energies for net nonzero yield for each ion species in both Fe and W and calculate full IIEE yields as a function of ion energy and incidence angle. Our results can be used to assess the effect of kinetic electron emission in models of full ET facility testing and operation. [ABSTRACT FROM AUTHOR]

Acoustic metamaterial concepts, such as metalenses and hyperlenses, have been studied with much interest for super-resolution imaging. However, the physics of wave scattering by sub-wavelength sized defects is still not very well understood. Here, we present studies on acoustic wave interactions with circular defects of sizes varying from over a wavelength to sub-wavelength scale. Near- and far-field scattering patterns of single circular defects are presented, connecting them to analytical frameworks. Scattering field signatures produced by two identical circular defects of different sizes placed side by side are then discussed. The separation distance between the defects is among the parameters varied to understand the effects of geometric features in successful imaging. Experimental results are presented to support the predictions reported in the paper. The insights have important implications for sub-wavelength imaging using acoustic metamaterials. [ABSTRACT FROM AUTHOR]

Inspired by the emerging field of twistronics, moiré photonic structures have attracted great interest. In this paper, we introduce the concept of the moiré Kagome lattice (MKL), which arises from the overlapping of a Kagome lattice at a commensurable angle of 38.211°. MKL exhibits a significantly broader main photonic bandgap (PBG) when compared to the traditional Kagome lattice. Through numerical simulations, we delved into the adjustable properties of the PBG of MKL by varying lattice parameters, including filling factors and materials. Meanwhile, we also observed the presence of photonic flatbands within the MKL structure. Specifically, the emergence of a super flat isolated flatband aids in achieving single-mode omnidirectional lasers and enhancing the omnidirectional electromagnetic interaction of materials, thereby expanding the applications of moiré photonic crystals. [ABSTRACT FROM AUTHOR]

In this paper, an ultra-thin metamaterial absorber (UMA) in the S-band is designed. The overall structure adopts a three-layer design. The top layer is a magnetic material, and the middle layer of the UMA is composed of a centrally symmetrical open square ring (four edges are opened) and a circular pattern placed at the center, which is etched on the FR4 dielectric substrate by printed circuit board technology. The absorptivity of the absorber is more than 90% in 1.73–4.04 GHz under normal incidence, and the fractional bandwidth is 80.1%. The total thickness of the absorber is about 3.4 mm, corresponding to 0.02 λ L at the lowest operating frequency. Moreover, it also has good polarization insensitivity and wide-angle incident characteristics. The absorption mechanism of the UMA is analyzed from the aspects of power loss density and surface current. Finally, a sample was fabricated and measured. The measured results are in good agreement with the simulation results, which verifies the effectiveness of the design method. [ABSTRACT FROM AUTHOR]

In this paper, a wideband polarization reconfigurable omnidirectional antenna (PROA) based on a single-substrate active metasurface is proposed. By controlling the states of the PIN diodes, the antenna can selectively radiate an omnidirectional linearly polarized wave and an omnidirectional circularly polarized wave. The reflection coefficient, axial ratio (AR), radiation pattern, and gain of the proposed antenna have been analyzed from the perspective of simulation and measurement. The measured results show that the PROA has a wide overlapped bandwidth from 2.87 to 3.67 GHz (relative bandwidth 24.46%). To the authors' best knowledge, this is the first reported wideband PROA based on a single-substrate reconfigurable polarization converter. This study not only offers a novel approach to design PROAs, but also greatly reduces the design complexity of the feed source compared with the traditional design method of PROAs. [ABSTRACT FROM AUTHOR]

When a cubic lattice is confined by a surface layer, the effective thermoelastic properties can be tailored by the prestress produced by the surface. The thermal expansion coefficient, temperature derivative of elasticity, and the equation of state (EOS) of the solid depend on the potential of each bond and the lattice structure, which can be predicted by the recently developed singum model. This paper first uses a granular lattice confined by a spherical shell to demonstrate singum modeling of the thermoelastic behavior of the cubic lattices and then extends it to atomic crystal lattices by considering the surface tension and long-range interactions. Given the elasticity and the EOS of a cubic crystal, the interatomic potential can be inversely derived. As the bond length changes with thermal expansion and pressure, the singum model predicts the temperature- and pressure-dependent elasticity. Using the orientational average, isotropic elastic constants can be obtained for polycrystals. The case study of copper (Cu) demonstrates the versatility of the model for different cubic lattices and predicts the experimental results of pressure- and temperature-dependent elasticity. The singum model is general for different lattice types and EOS forms and provides clear physical and mechanical meanings to correlate the interatomic potential, EOS, and elasticity in the closed-form formulation, which is very useful in engineering design and analysis of metal structural members in fire, geothermal, and space applications without the needs of large-scale numerical simulations. [ABSTRACT FROM AUTHOR]

Fractures in body-centered-cubic metals and alloys below the ductile-to-brittle transition temperature are brittle. This is theoretically explained by the notion that the critical stress intensity factor of a given crack front for brittle fracture is smaller than that for plastic deformation; hence, brittle fracture is selected over plastic deformation. Although this view is true from a macroscopic perspective, such a fracture is always accompanied by small-scale plastic deformation near the crack tip, that is, crack tip plasticity. This paper investigates the origin of this plasticity using atomistic modeling with the machine learning interatomic potential of α -Fe. Some plastic modes are activated by rapid crack propagation, whereas no plasticity is activated when the crack tips are gradually fractured. The group of activated atoms dynamically caused by brittle crack propagation was identified as the precursor of plasticity. [ABSTRACT FROM AUTHOR]

Two-dimensional (2D) piezoelectric nanomaterials have widely been studied recently due to their promise for various applications in technology. Investigation of vertical piezoelectricity will contribute to a deeper understanding of the intrinsic mechanism of piezoelectric effects in the 2D structures. In this paper, we report a first-principle study for the structural, electronic, piezoelectric, and transport properties of new-designed Janus WSi Z 3 H (Z = N, P, and As) monolayers. The structural stability of WSi Z 3 H is theoretically confirmed based on the energetic, phonon dispersion, and also elastic analyses. At the ground state, while WSiN 3 H is an indirect semiconductor, both WSiP 3 H and WSiAs 3 H are predicted to be direct semiconductors with smaller bandgaps. When the spin-orbit coupling effects are taken into account, a large valley spin splitting is observed at the K point of WSi Z 3 H materials. Interestingly, a giant Rashba spin splitting is found in WSiP 3 H and WSiAs 3 H with Rashba constant α R up to 770.91 meV Å. Additionally, our first-principles study indicates that Janus WSi Z 3 H monolayers are piezoelectric semiconductors with high out-of-plane piezoelectric coefficient | d 31 | , up to 0.15 pm/V, due to the broken mirror symmetry. Besides, with high electron mobilities and also possessing direct band gaps, WSiP 3 H and WSiAs 3 H monolayers are favorable for applications in optoelectronics. [ABSTRACT FROM AUTHOR]

We use a 2.5D hybrid simulation to study the breathing mode (BM) dynamics in Hall thrusters (HTs). This involves a 1D Euler fluid simulation for neutral dynamics in the axial direction, coupled with a 2D axial–azimuthal Particle-in-Cell (PIC) simulation for charged species. The simulation also includes an out-of-plane virtual dimension for wall losses. This setup allows us to replicate the BM's macroscopic features observed in experiments. A comprehensive analysis of plasma parameters in BM's phases divides it into two growth and two decay sub-phases. Examining 1D axial profiles of electron temperature, gas and plasma densities, and particle creation rate shows that an increase in electron temperature alone cannot sustain ionization. Ionization seems to be influenced by the spatial correlation between electron and gas densities and the ionization rate coefficient. Investigating ion back-flow reveals its impact on modulating neutral flux entering the ionization region. The hybrid simulation's outcomes let us assess the usual 0D predator–prey model's validity and identify its limitations. The ionization and ion convection term approximations hold, but the gas convective term approximation does not. Introducing an alternative gas convective term approximation involving constant density ejection from the ionization region constructs an unstable BM model consistent with simulation results. In addition, this paper explores how varying the imposed voltage and mass flow rate impacts the BM. The BM frequency increases with imposed voltage, aligning with theoretical predictions. The mass flow rate variation has a limited effect on BM frequency, following the theoretical model's trend. [ABSTRACT FROM AUTHOR]

We deduce equations to calculate coupling coefficients of diamond micro-ring resonators. The equations can be used universally at any wavelength but not limited to the transmission peaks/valleys, and can be adapted with triangular cross-sections and tapered waveguides. Consequently, we build three models in accordance to different diamond processing technologies. These models deal with ring resonators with either rectangular cross sections, or triangular cross sections, or with tapered bus for triangular cross sections. The calculated coupling coefficients can be well fitted by exponential decay functions of gap d. Due to geometrical limitations, triangular-cross-sectional diamond resonators are shown to have much smaller (factor 20) coupling coefficients than those of rectangular-cross-sectional resonators. A tapered bus is shown to be beneficial to increase the coupling coefficient. Besides the calculation of coupling coefficients, the method presented in the paper can also be used to calculate the bending loss of micro-ring resonators, as a complement to the existing methods. [ABSTRACT FROM AUTHOR]

This paper investigates a systematic theoretical study of the lattice dynamical, electronic, and thermoelectric transport properties of PbTe, which is subjected to hydrostatic pressure and uniaxial stress along the [100], [110], and [111] directions, by using first-principles calculations. Our study demonstrates that stress is an effective tool for regulating thermoelectric properties in materials, and different types of stress affect these properties through distinct mechanisms. Specifically, under hydrostatic pressure and uniaxial stress along the [100] direction, PbTe exhibits similar electronic behavior but different lattice dynamical properties. Bandgap closure and reopening are observed under hydrostatic pressure and uniaxial stress along the [100] direction, whereas only the gap opposite trends are seen for uniaxial stress along the [110] and [111] directions. Under uniaxial stress along the [100] direction, phonon lifetimes decrease, leading to low thermal conductivity. In contrast, under hydrostatic pressure and uniaxial stress in the [110] and [111] directions, phonon lifetimes are enhanced due to a weakening of the anharmonic effect. Our findings provide a comprehensive understanding of the implication of different stress types on the thermoelectric properties of PbTe. [ABSTRACT FROM AUTHOR]

With the in-depth study of open optical systems, the topological phases of non-Hermitian metasurfaces have attracted increasing attention due to their topological protection properties. Here, in this paper, a tunable non-Hermitian metasurface with bidirectional anisotropism is proposed. By incorporating the phase change material vanadium dioxide (VO2) into the metasurface, two topological exceptional points (EPs) appear in the system by adjusting the conductivity of VO2 and chiral responses appear at both EPs. This research shows that the conductivity significantly affects the reflection of the metasurface, and the zero-reflection points correspond to the EPs of the non-Hermitian system. Further results prove that circling around EPs leads to a 2π phase change, which is topologically protected and independent of the encirclement path. Therefore, this study employs an active control approach to realize two topological EPs. Through comprehensive investigations into the topological properties and chiral performance at EPs, we elucidate the mechanism for the chirality generation in non-Hermitian metasurfaces, which offers feasible solutions for the development of chiral topological devices and light transmission and modulation in future applications. [ABSTRACT FROM AUTHOR]

In the present paper, we apply a blind fitting algorithm to model two-dimensional energy-incidence angle maps of soft x-ray resonant reflectivity measured in nanoscale epitaxial multilayers of multiferroic ε-Fe2O3 grown by pulsed laser deposition. The possibility of fitting the spectral shape of the complex refraction index across the Fe L3 absorption edge without having an initial guess about the optical constants has been demonstrated. The spectral shape fitting of the real (f1) and imaginary (f2) parts of the atomic scattering factor has been carried out by using a specially designed software utilizing OpenCL fast calculations on graphical processing units. The Kramers-Kronig relations between f1 and f2 are automatically taken into account by the fitting algorithm. A reasonable agreement between blindly generated and reference scattering factor spectra derived independently from an x-ray absorption spectroscopy experiment has been demonstrated. The blind fitting has been compared with the alternative refinement routines, in which small free variations of the reference spectral shapes (or no variations at all) have been allowed. The presented approach to the resonant x-ray reflectometry modeling makes it unnecessary to acquire the optical constant spectral shapes in advance and, thus, is especially helpful when such spectra cannot be physically measured, e.g., for a buried layer of a multilayer system. [ABSTRACT FROM AUTHOR]

Copper (Cu) interconnections have been widely used in advanced electronic packaging due to their outstanding thermal and electric properties. Preparing a smooth and uniform Cu seed thin layer is one of the critical processes to obtain high-reliability Cu interconnections. The barrier layer between Cu and silicon (Si) devices is necessary to prevent the inter-diffusion between Cu and Si. However, little work has been done on the surface roughness analysis of the Cu seed layer deposited on the diffusion barrier layer. In this paper, the influences of deposition thickness, incident energy, barrier layer temperature, and surface morphology on the surface roughness of the Cu seed layer deposited on α-titanium (α-Ti) barrier layer were studied in detail by the molecular dynamics (MD). The simulation results indicated that appropriate parameters have a beneficial effect on reducing the surface roughness, and the surface morphology of the Cu seed layer strongly connects with that of the barrier layer. These results provided a foundation for optimizing the quality of the Cu seed layer. [ABSTRACT FROM AUTHOR]

Quantum Dot Cellular Automata (QCA) and reversible logic have emerged as promising alternatives to conventional CMOS technology, offering several advantages, such as ultra-dense structures and ultra-low-power consumption. Among the crucial components of processors, the Arithmetic Logic Unit (ALU) has witnessed significant advancements in reversible computing, leading to energy-efficient and high-speed computing systems, particularly beneficial for Digital Signal Processing (DSP) applications. Conventional ALUs, reliant on irreversible logic, encounter energy inefficiencies due to information loss during computations, resulting in increased power consumption. Moreover, they may face limitations in processing speed, impacting real-time processing capabilities, especially for complex DSP tasks involving intensive arithmetic and logic operations. In response to these challenges, a research paper presents a pioneering approach, proposing a novel reversible ALU design using QCA nanotechnology. The proposed design ingeniously incorporates Modified Fredkin (MF) gates, and a coplanar reversible full adder based on the HNG gate, skillfully leveraging the unique features of QCA nanotechnology to optimize the ALU's energy-efficient and high-speed performance for DSP applications. This revolutionary QCA reversible ALU comprises 330 QCA cells arranged in a compact 0.41 μm2 area, skillfully realized through the coplanar clock-zone-based crossover approach. Its core computational elements, the three MF gates, and the innovative coplanar reversible full adder empower the ALU to execute a remarkable array of 20 distinct arithmetic and logic operations, showcasing its versatility in handling diverse DSP tasks. The proposed structure undergoes extensive simulations utilizing QCADesigner version 2.0.3 to confirm its performance. The evaluation results manifest substantial improvements compared to previous designs, boasting a 30% reduction in area occupancy, a 20% decrement in cell count, a 10% reduction in latency, and a 10% decrease in quantum cost compared to the best-known previous structure. These compelling outcomes solidify the potential of the proposed reversible ALU as a transformative advancement in energy-efficient and high-speed computing for DSP applications. [ABSTRACT FROM AUTHOR]

The article introduces a section of the issue dedicated to papers from the 29th International Conference on the Physics of Semiconductors (ICPS29), held in Rio de Janeiro, Brazil, from July 27-August 1, 2008.

Spin–orbit torque (SOT) can provide efficient electrical manipulation of magnetism via applying electrical current to breaking the symmetry of damping-like torque. In the heterojunction of heavy and ferromagnetic metal, Dzyaloshinskii–Moriya interaction (DMI) is one of the key ingredients for stabilizing chiral spin structures, like chiral domain walls. Meanwhile, materials with larger charge-spin conversion rates are also highly expected for the efficient SOT. In this paper, spin–orbit torque magnetic switching is observed in the perpendicularly magnetized Pt/Co/Bi2Se3 and shows relatively high efficiency with low critical switching current density of about 5 × 105 A cm−2. The SOT efficiency and DMI in perpendicularly magnetized Pt/Co/Bi2Se3 were quantitatively investigated by electrical detection of the effective spin Hall field. The DMI constant is about 2.6 mJ m−2, and the effective spin Hall angle of Pt/Co/Bi2Se3 is about 0.14. The work also demonstrates that the Bi2Se3 layer takes the main responsibility for SOT, and the Pt/Co interface is the main source of DMI in Pt/Co/Bi2Se3 structures, which makes it possible to achieve independent optimization of DMI and SOT in the Pt/Co/Bi2Se3 structure at room temperature for the advanced application of spintronic devices. [ABSTRACT FROM AUTHOR]

20 to explain the plastic deformation mechanism; the explanation of why the twin boundary can serve as an obstacle of dislocation movement on one side and also serve as dislocation nucleation sites is presented in Figs. 22 and 23; and the energy of grain boundary, twin boundary, and stacking faults are listed in Table I to explain why grain boundary only plays one role as dislocation nucleation sites, but the twin boundary can play two roles. The nanowires in both our paper and Ref. [3] were constructed according to the previous experimental observation.[4] In Ref. [3], the plastic deformation mechanism of polycrystalline nanowires was studied. [Extracted from the article]

A detailed experimental study of high power impulse magnetron sputtering discharges is performed using time-resolved ground state density mapping of the sputtered neutrals and ions. This Paper deals with the effects related to the plasma-on phase and can be considered as an extension of Paper I being published simultaneously. The influence of plasma pulse duration, pulse energy, gas pressure as well as molecular oxygen admixture on the spatial and temporal particle density evolution is examined. Special attention is given to the temporal evolution of the ionization fraction distribution of the sputtered atoms. In addition, the 2D vector maps reflecting particle propagation, sputtering, and ionization in the discharge volume are also presented and discussed, similarly to the first part of this study [J. Appl. Phys. 128, 043303 (2020)]. [ABSTRACT FROM AUTHOR]

The article discusses conference papers on topics related to physics which were featured at the the Fourth International Conference on Multiscale Materials Modeling, which was held October 27-31 in 2008 in Tallahassee, Florida.

The article presents an overview of papers taken from the Piezoresponse Force Microscopy (PFM) Workshop Series focused on recent advances in PFM techniques, theories and applications including a paper on temperature-induced evolution of structure and electromechanical response in ferroelectric polymer.

Data-driven machine learning techniques can be useful for the rapid evaluation of material properties in extreme environments, particularly in cases where direct access to the materials is not possible. Such problems occur in high-throughput material screening and material design approaches where many candidates may not be amenable to direct experimental examination. In this paper, we perform an exhaustive examination of the applicability of machine learning for the estimation of isothermal shock compression properties, specifically the shock Hugoniot, for diverse material systems. A comprehensive analysis is conducted where effects of scarce data, variances in source data, feature choices, and model choices are systematically explored. New modeling strategies are introduced based on feature engineering, including a feature augmentation approach, to mitigate the effects of scarce data. The findings show significant promise of machine learning techniques for design and discovery of materials suited for shock compression applications. [ABSTRACT FROM AUTHOR]

Nucleation is important in processing of good quality diamond crystals and textured thin films by microwave plasma enhanced chemical vapor deposition (MPECVD) for applications in quantum devices and systems. Bias-enhanced nucleation (BEN) is one approach for diamond nucleation in situ during MPECVD. However, the mechanism of diamond nucleation by BEN is not well understood. This paper describes results on the nucleation of diamond within a carbon film upon application of electric field during the BEN-facilitated MPECVD process. The nature of the diamond film and nuclei formed is characterized by SEM (scanning electron microscopy), Raman spectroscopy, and high-resolution transmission electron microscopy (HRTEM). The HRTEM images and associated diffraction patterns of the nucleation layer show that the diamond nuclei are formed within the carbon film close to the Si (100) substrate surface under the influence of microwaves and electric fields that lead to formation of the textured diamond film and crystal upon further growth. These results are expected to develop diamond films of optimum quality containing a nitrogen-vacancy center for application in quantum systems. [ABSTRACT FROM AUTHOR]

The field-free spin–orbit torque induced 180° reorientation of magnetization is beneficial for the high performance magnetic memory. The antiferromagnetic material (AFM) can provide a higher operation speed than the ferromagnetic counterpart. In this paper, we propose a trilayer AFM/insulator/heavy metal structure as the AFM memory device. We show that the field-free switching of the AFM with a perpendicular Néel vector can be achieved by using two orthogonal currents, which provide a uniform damping-like torque and uniform field-like torque, respectively. The reversible switching can be obtained by reversing either current. A current density of 1.79 × 1011 A/m2 is sufficient to induce the switching. In addition, the two magnetic moments become noncollinear during switching. This enables an ultrafast switching within 40 ps. The device and switching mechanism proposed in this work offer a promising approach to deterministically switch the AFM with the perpendicular Néel vector. It can also stimulate the development of an ultrafast AFM-based MRAM. [ABSTRACT FROM AUTHOR]

Conventional magnetron discharge is a widely used technology for many applications. In the last decade, the high current density sputtering regime has been an interesting alternative for tailoring thin film properties. In this paper, we focused on the electrical characterization of the helium magnetron plasma operated at average gas pressure (5 Pa) with a molybdenum target. Optical emission spectroscopy diagnostics also supports this study by providing information on electron density evolution. The analysis of the plasma–surface interaction zone on the target unveiled the physical mechanisms associated with the high current density range (6 A cm−2), corresponding to different discharge regimes. The self-sputtering yield plays a key role in high-power impulse magnetron sputtering discharge operated with helium. The electron density is highly dependent on the presence of a metal. [ABSTRACT FROM AUTHOR]

Bound states in the continuum (BICs), manifesting themselves as the collapse of Fano resonance, are observed in many photonic and plasmonic systems. The BICs have been studied systematically through various methods such as the topological photonics analysis, temporal coupled mode theory, multipole decomposition method, and the cavity quantum electrodynamics (CQED) method. Since CQED can give a macroscopic and intrinsic description of light–matter interaction, it is expected to study BIC that participates in strong coupling. What is more, the relation between coupling strength, the Fano parameter, and the asymmetry property of BICs needs to be clarified. In this paper, we investigated the strong coupling between the cavity mode and Bloch-surface plasmon polariton (Bloch-SPP) mode induced by BICs within the plasmonic lattices of the metal-dielectric-metal (MDM) layer. The properties of strong coupling and BIC were revealed theoretically by the quantum model based on the CQED. The increase in the Fano parameters of BICs was proved to facilitate the coupling strength, which was indicated by the monotonically increasing relation between the Fano parameter and the coupling strength. This work may pave the way for flexible modulation and application of BIC in the fields of high-quality plasmonic nanocavity, low-threshold nano-lasers, and quantum information. [ABSTRACT FROM AUTHOR]

In recent years, non-thermal plasma technology has emerged as one of the most promising candidates for decomposing CO 2. The fluid model, a powerful tool to investigate the plasma dynamics, is computationally costly in simulating complex CO 2 plasma with tens of particles and hundreds of reactions, especially driven by short pulsed voltages. In this paper, a deep neural network (DNN) is proposed to describe the discharge characteristics and plasma chemistry of CO 2 pulsed discharge at atmospheric pressure. The DNN is trained using the simulation data obtained from the fluid model and then continuously optimized by minimizing the loss function. The effectiveness and feasibility of the DNN are verified by comparing with the experimental measurement and the numerical simulation results. Compared to the time-consuming fluid simulations with tens of hours, the well-trained DNN typically requires only a few seconds to obtain the essential characteristics of CO 2 pulsed discharges with high accuracy, significantly improving the computational efficiency. The DNN prediction results show that increasing the pulse rise rate at a given voltage amplitude can effectively raise the discharge current and breakdown voltage, and the electric field in the sheath region also increases with the pulse rise rate. In addition, the density of the surface charge accumulated on the dielectric layer increases with the plateau duration, and then a strong induced electric field by the surface charges is established, which obviously improves the discharge current during the pulse fall phase. The predicted data also show that increasing the pulse rise rate and the plateau duration could effectively improve the density of product species, such as CO and O 2 , leading to an increase in CO 2 conversion. This study demonstrates that the DNN method is a reliable tool for obtaining the essential discharge characteristics of atmospheric CO 2 pulsed plasma and provides a promising avenue for future applications of DNN-based methods in non-thermal plasmas. [ABSTRACT FROM AUTHOR]

Dopant profiles near the semiconductor–oxide interface are critical for microelectronic device performance. As the incorporation of Si1−xGex into transistors continues to increase, it is necessary to understand the behavior of dopants in Si1−xGex. In this paper, the diffusion and electrical activation of phosphorus within a strained, single-crystal Si0.7Ge0.3 layer on Si during oxidation are reported. Both layers were uniformly doped, in situ, with an average phosphorus concentration of 4 × 1019 atoms/cm3. After high-temperature oxidation, secondary ion mass spectrometry measurements revealed that the bulk of the phosphorus diffuses out of only the SiGe layer and segregates at the oxidizing SiGe–SiO2 interface. Hall effect measurements corroborate the observed phosphorus loss and show that the phosphorus diffusing to the oxidizing interface is electrically inactive. Through density functional theory (DFT) calculations, it is shown that phosphorus interstitials prefer sites near the SiGe–SiO2 interface. Finally, based on a combination of experimental data and DFT calculations, we propose that the phosphorus atoms are displaced from their lattice sites by Ge interstitials that are generated during SiGe oxidation. The phosphorus atoms then migrate toward the SiGe–SiO2 interface through a novel mechanism of hopping between Ge sites as P–Ge split interstitials. Once they reach the interface, they are electrically inactive, potentially in the form of interstitial clusters or as part of the reconstructed interface or oxide. [ABSTRACT FROM AUTHOR]

Valleytronics has attracted much attention due to its potential applications in information progress and data storage. In this paper, monolayer Cr2S3 is proven to be a ferromagnetic (FM) semiconductor by using first-principles calculations. Moreover, monolayer Cr2S3 exhibits a perpendicular magnetic anisotropy energy of 30 μeV/f.u. Surprisingly, monolayer Cr2S3 presents spontaneous valley polarization, which means that it will be nonvolatile for data storage. Notably, monolayer Cr2S3 changes to an antiferromagnetic (AFM) state from the original FM state under biaxial tensile strain, and its easy axis will be reorientated from out-of-plane to in-plane when the compressive strain is larger than −2%. Importantly, for AFM monolayer Cr2S3, the valley polarization reversion can be realized by an external electric field along the z direction. In brief, valley polarization has been achieved in both FM and AFM monolayer Cr2S3, which is very rare in other valleytronics research. The present research provides a tantalizing candidate for realizing and manipulating valley and spin physics. [ABSTRACT FROM AUTHOR]

Under divergent electric fields, space charge is locally accumulated and controls the initiation and evolution of insulation degradation phenomena, such as electrical trees and partial discharge. The space charge profiles provide crucial information for evaluating the insulation performance. However, the existing space charge measurement methods are not directly applicable under divergent electric fields. In this paper, a method combining experiment and simulation is proposed to evaluate the space charge distribution around a needle electrode. An experimental system is established, and the acoustic waves are measured with a hydrophone placed on the symmetric axis. In order to obtain the space charge distribution, the space charge injection process is simulated using the bipolar charge transport model to reduce the freedom of the distribution. Then, calculations are made for the acoustic waves produced by the simulated space charge distributions. Using the signals without the contribution of internal charge, a correspondence between the experiment and simulation is established. For each experimental signal, the matched calculated signal is obtained using the zero-crossing time as a reference. A perfect match between them is presented after the amplitude compensation, which indicates that the space charge distribution in the experiment is identical to that in the simulation model. [ABSTRACT FROM AUTHOR]

In this paper, we proposed and numerically demonstrated a giant enhancement up to in both fo 10 8 rward and backward propagation of the second harmonic generation by combining the high-quality factor cavities of the bound states in the continuum and the excellent nonlinear optical crystal of lithium niobate. The enhancement factor is defined as the ratio of the second harmonic signal generated by the structure (lithium niobate membrane with Si grating) divided by the signal generated by the lithium niobate membrane alone. Furthermore, a minimum interaction time of 350 ps is achieved despite the etching less lithium niobate membrane with a conversion efficiency of 4.77 × 10−6. The origin of the enhancements is linked to the excitation of a Fano-like shape symmetry-protected mode that is revealed by finite-difference time-domain simulations. The proposed platform opens the way to a new generation of efficient integrated optical sources compatible with nano-photonic devices for classical and quantum applications. [ABSTRACT FROM AUTHOR]

Thermophotovoltaic (TPV) devices, which can break the Shockley–Queisser limit (33.7%) and enhance the thermal energy utilization efficiency, have garnered increasing attention in recent decades. Structuring the emitter surface has been demonstrated to be powerful for tailoring thermal emission to enhance the power density and system efficiency of a TPV system. However, the design and optimization of the broad parameters of the surface nanostructures manually remain to be thorny issues. In this paper, the Bayesian algorithm under the framework of material informatics was coupled with a rigorous coupled wave analysis to optimize the geometry of the infrared grating nanostructure to achieve wavelength-selective emission to boost the TPV performance. It is demonstrated that only less than 0.173% of the total candidate structures were calculated to find out the optimal structure with high spectral emittance in the range of 0.3–1.708 μm, and the power density and system efficiency of the TPV system were enhanced to 4.20 W/cm2 and 35.37%, respectively. The present machine-learning-based optimization of a multi-parameter nanostructure can improve the performance of the TPV system significantly and can be extended to other physical fields in a feasible manner. [ABSTRACT FROM AUTHOR]

In the paper, a magneto-mechanic hysteresis model for giant magnetostrictive materials is suggested by considering the effect of the domain rotation and domain wall motion on the magnetization process under prestress and the applied magnetic field. The coercive force, which is magneto-mechanic dependent, is proposed instead of a pinning constant in the Jiles–Atherton model. The model can well predict the characteristics of a magnetization-applied field curve and magnetostrictive strain-applied field curve shown in the experiment, especially the "overturn phenomenon" under different compressive prestresses. Furthermore, the effect of the microstructure parameter, such as the ratio of the domain wall thickness to the internal stress wavelength, the amplitude of internal stress, the ratio of the domain wall thickness to the inclusion radius, and inclusion consistency, on coercive force under applied prestress can also be described by the model. The comparison between the results predicted by the model and experiment shows that the model is suited for a wide-ranging applied magnetic field. [ABSTRACT FROM AUTHOR]

Pulsed electric field-induced electroporation has been widely used, but its specific perforation theory has not been fully elucidated. Therefore, this Perspective paper takes as a clue the dynamic development relationship between the pore energy and the pore state in cell membranes. First, based on the contribution of line tension, surface tension, steric repulsion, and applied electric field to pore energy, the theoretical models of reversible electroporation of a microsecond pulsed electric field and irreversible electroporation of a high-frequency nanosecond pulsed electric field are reviewed. Then, the contribution of elastic strain energy to pore energy is increased, and the theoretical model of pulsed electric field electroporation considering the mechanical properties of cell membranes is further reviewed. Based on the contribution of magnetic stress generated by the magnetic field and the gradient magnetic field to pore energy, a theoretical model of cell membrane magnetoporation under the action of a pulsed magnetic field is proposed, which lays a theoretical foundation for the popularization and application of non-contact cell membrane perforation technology. [ABSTRACT FROM AUTHOR]

It is of great significance to explore the ocean environment and strategic deployment under the polar ice layer. In this paper, the evolution laws of the water entry cavity of projectiles passing through ice holes with different shapes and sizes are studied, and the motion states of projectiles passing through holes are described. The case of zero-gap contact motion between a projectile and a hole is considered. The results show that the initial resistance drag of the projectile passing through the circular ice hole is the largest in the case of zero-gap contact, and the cavity collapse is serious, while almost no cavity appears at the shoulder of the projectile when passing through the square hole. The intersection of splash crowns is formed at the square and triangular ice holes as the hole size increases, a diffused cavity is formed at the bottom of the hole edge, and the formation of the jet appears multiple times at each stage. Some unique vortices appear near the hole when the projectile passes through the hole. The variations of force and velocity of the projectile passing through the triangular hole are stable, but the velocity drop is the largest. [ABSTRACT FROM AUTHOR]

It has been demonstrated that sound waves carrying orbital angular momentum undergo frequency modulation after being reflected by a rotating object. In this paper, we, observed the rotational Doppler shift phenomenon of the acoustic vortex in an underwater environment by using a Fresnel-spiral zone plate for the construction of the focused acoustic vortex with controllable topological charge. The positive and negative rotation speeds of the spinning object are precisely determined with the rotational frequency shift and the acoustic vortex's topological charge. The rotational Doppler effect of acoustic vortex provides a possibility to improve the detection and recognition accuracy of Autonomous Underwater Vehicles with propellers. [ABSTRACT FROM AUTHOR]