Search

A novel method was developed for studying the ink-paper interface and the structural variations of a deposited layer of ink. Combining high-resolution x-ray tomography with laser ablation, the depth profile of ink (toner), i.e., its varying thickness, could be determined in a paper substrate. X-ray tomography was used to produce the 3D structure of paper with about 1 μm spatial resolution. Laser ablation combined with optical imaging was used to produce the 3D structure of the printed layer of ink on top of that paper with about 70 nm depth resolution. Ablation depth was calibrated with an optical profilometer. It can be concluded that a toner layer on a light-weight-coated paper substrate was strongly perturbed by protruding fibers of the base paper. Such fibers together with the surface topography of the base paper seem to be the major factors that control the leveling of toner and its penetration into a thinly coated paper substrate.

A model for the electrostatic detection apparatus is presented. An electrostatic potential models the effects of indented writing, erasures, and fingerprints. Poole–Frenkel emission from Mylar surface states is employed to model the discharge process. Experimental evidence is provided which supports the model. The role of the Mylar sheet is identified. The electric effect of indented writing is identified as a surface charge created by paper-to-paper friction.

The temperature-dependence of the electrical and dielectric properties of paper substrates was studied using experimental papers with different NaCl contents, different thicknesses, and different grammages. Physical processes related to the charging potential, charge decay rate, conductivity, dielectric constant, and dielectric loss of papers are dependent on thermal energy, and this dependence on temperature can be described by exponential expressions. The ion content of paper not only determines the level of these properties at a given temperature, as expected but also influences their temperature-dependence. Frequency analysis of the dielectric loss confirms that new structures are formed in paper by the addition of NaCl. The results may be applicable to the design of materials and equipment, e.g., for the electrophotographic printing processes.

A new equivalent circuit model for electrographic recording on dielectric paper with a backing electrode is presented. It is shown that the conductivity of a thin layer between the dielectric layer and basepaper is more important than bulk conductivity in the basepaper.

Graphene oxide and reduced graphene oxide thin films are very promising materials because they can be used in optoelectronic devices and in a growing range of applications such as touch screens and flexible displays. In this work, graphene oxide (GO) and thermally reduced graphene oxide (rGO) thin films, deposited on Ti/glass substrates, have been obtained by electrophoretic deposition. The morphological and the structural properties of the samples have been investigated by micro-Raman technique, X-ray reflectometry, and SEM analysis. In order to study the optical and electrical properties, variable angle spectroscopic ellipsometry and impedance analysis have been performed. The thermal annealing changes strongly the structural, electrical, and optical properties, because during the thermal processes some amount of sp3 bonds originally present in GO were removed. In particular, the annealing enhances the Ohmic behavior of the rGO film increasing its conductivity and the estimated optical density. Moreover...

We demonstrate a simple interferometric probe to detect nanoscale dynamics of sessile fluid drops on arbitrary rough or flexible substrates. The technique relies on producing high-contrast Newton-ring like dynamical fringes by interference between a weak Fresnel reflection from the air-fluid interface of the drop and an air-glass interface of a convex lens placed above the drop in quasi-normal geometry. By analyzing the dynamical fringes, we observed 100–700 nm/s fluctuations in water drops evaporating on metal, leaves, insect wing, and sand paper due to their surface roughness. Similar fluctuations were also observed during spreading of non-volatile glycerin drops on various rough surfaces. Another application of the technique is demonstrated in precision measurement of change in evaporation rate of a water drop due to cooling of a metal substrate. This technique can be further miniaturized with a microscope objective with potential for wide applications.