Search

We present computational results on electronic, magnetic, and structural properties of CoVMnSb, a quaternary Heusler alloy. Our calculations indicate that this material may crystallize in two energetically close structural phases: inverted and regular cubic. The inverted cubic phase is the ground state, with ferrimagnetic alignment, and around 80% spin polarization. Despite having a relatively large bandgap in the minority-spin channel close to the Fermi level, this phase does not undergo a half-metallic transition under pressure. This is explained by the "pinning" of the Fermi level at the minority-spin states at the Γ point. At the same time, the regular cubic phase is half-metallic and retains its perfect spin polarization under a wide range of mechanical strain. Transition to a regular cubic phase may be attained by applying uniform pressure (but not biaxial strain). In practice, this pressure may be realized by an atomic substitution of non-magnetic atoms (Sb) with another non-magnetic atom (Si) of a smaller radius. Our calculations indicate that 25% substitution of Sb with Si results in a half-metallic regular cubic phase being the ground state. In addition, CoVMnSb0.5Si0.5 retains its half-metallic properties under a considerable range of mechanical pressure, as well as exhibits thermodynamic stability, thus making this alloy attractive for potential spintronic applications. We hope that the presented results will stimulate experimental efforts to synthesize this compound. [ABSTRACT FROM AUTHOR]

In this work, we shed light on the mechanism behind the complexity of the anomalous Hall effect (AHE) in the rare earth-transition metal (RE-TM) compound. To achieve a comprehensive picture, we first theoretically investigate the pure elemental metals and observe that the AHE of RE Gd is negative while that of TM Co is positive. We then investigate magnetic properties and AHE behavior for two typical cases of TM-rich and RE-rich compositions that correspond to GdCo5 and GdCo3 alloys, respectively. The observation that net magnetization is not a decisive factor in assessing the AHE value is consistent with recent claims. Besides, our investigations reveal a significant role of the Gd sublattice to the AHE. The reduction AHE signal under a high-applied field is attributed to the counteraction between the positive and negative AHC contributions when the TM and RE sub-moments are aligned parallel. On a bright note, our new findings can be successfully employed to unravel two types of aberrant humps of AHE signals near compensation temperature. [ABSTRACT FROM AUTHOR]

It is established that 2D magnetic materials are the ideal platform for building up modern-day electronic and spintronic devices. The popular ways to achieve 2D magnetic materials are mechanical exfoliation and chemical vapor deposition. However, the direct chemical synthesis route of such magnetic 2D materials on a large scale is relatively unexplored. This article reports an easy and cost-effective facile chemical synthesis with a proper capping agent and magnetic study of free-standing 2D Cr2S3 nanosheets and Cr2S3 nanoparticles within the temperature range of 2–300 K under the magnetic field of up to 5 T. Although few magnetic results on 2D Cr2S3 are available in the literature, there is enough scope to work for an in-depth understanding of the magnetic aspects of this 2D material. Here, ferrimagnetic ordering with a sufficiently high coercivity of up to 0.139 T at 2 K along with a tendency to the saturation in magnetization down to a certain temperature limit is observed. Contrary to the strong antiferromagnetic coupling with a Néel temperature, as observed by previous researchers, is also observed for this chemically synthesized 2D Cr2S3 nanosheets. A transition temperature of 117 K is observed for the Cr2S3 nanosheets, whereas for Cr2S3 nanoparticles, a transition temperature of 101.7 K is observed with negligible coercivity. This facile synthesis technique may be applied to achieve other non-van der Waals type 2D magnetic materials. These kinds of non-van der Waals type 2D magnets will be useful to modern-day spintronic devices. [ABSTRACT FROM AUTHOR]

Fully compensated ferrimagnetic half metals have attracted great attention in spintronics. Unlike many previous calculations based on hypothetical ordered alloys, here we look for existing solid solution series taking as an example Co1−xCrxS2. Calculations find that a low-spin state for Cr that matches early experiments and a fully compensated ferrimagnetic half metal with Curie temperature above room temperature is found at x ≈ 0.33. Our study demonstrates the method of combining two half metals with light and heavy 3d metals in a solid solution to achieve compensation, where atomic disorder does not destroy the desired properties. [ABSTRACT FROM AUTHOR]

There is a growing interest in BiFeO3-based alloys because of the possibility it offers for developing high-temperature high-performance piezoelectric materials and for their interesting multiferroic properties. Often such ceramics are synthesized with additives either to reduce/suppress leakage current that the system inherits from the parent compound BiFeO3 or to promote sintering via formation of the liquid phase. We demonstrate here the propensity for stabilizing ferromagnetism in the ferroelectric solid solution BiFeO3–PbTiO3 (BF–PT) when synthesized with additive MnO2. Detailed investigation revealed that the ferromagnetic property of the ceramic is extrinsic and caused by the additive enabled precipitation of trace amount of the ferrimagnetic Pb-hexaferrite phase, not easily detected in conventional x-ray diffraction measurements. We also show that the ferromagnetic property is induced in Co-modified BF–PT. However, in this case, the additive stabilizes the CoFe2O4 spinel ferrite phase. While our findings offer a strategy to develop particulate magnetoelectric multiferroic composites using additive assisted precipitation of the ferrimagnetic phase(s) in BiFeO3-based ferroelectric alloys, it also helps in better understanding of the electromechanical response in BFO-based alloys. [ABSTRACT FROM AUTHOR]

We report different growth modes and corresponding magnetic properties of thin EuSe films grown by molecular beam epitaxy on BaF2, Pb1−xEuxSe, GaAs, and Bi2Se3 substrates. We show that EuSe grows predominantly in the (001) orientation on GaAs(111) and Bi2Se3, but along the (111) crystallographic direction on BaF2 (111) and Pb1−xEuxSe (111). High resolution transmission electron microscopy measurements reveal a sharp and highly crystalline interface for both (001) and (111) EuSe films. In agreement with previous studies, ordered magnetic phases include antiferromagnetic, ferrimagnetic, and ferromagnetic phases. In contrast to previous studies, we found a strong hysteresis of the antiferromagnetic–ferrimagnetic transition. The ability to grow epitaxial films of EuSe on Bi2Se3 and of Bi2Se3 on EuSe enables further investigation of interfacial exchange interactions between various phases of an insulating metamagnetic material and a topological insulator. [ABSTRACT FROM AUTHOR]

This paper presents a theoretical and experimental analysis of nonlinear magnetic transmission lines and demonstrates the phenomenon and capability of a simultaneous rise and fall time compression. A theoretical approach is formulated in which a new version of the modified Korteweg–de Vries equation is developed utilizing the Gardner–Morikawa transformation, continuum limit approximation, Toda-lattice approximation, and Mei theory of Maxwellian circuits. The proposed theoretical foundation work is validated through experimental demonstration. The pulse generation in a nonlinear magnetic transmission line is then studied in detail, and the output pulse characteristics are explored under different magnetic field strengths and arbitrary magnetization directions. In particular, output waveforms are analyzed in terms of pulse amplitude, full width half maximum, detailed ringing level, and figure of merit. Magnetic losses that arise in the ferrite material are modeled. It is shown that these losses are responsible for originating dissipative effects, which in turn deteriorate pulse shaping and increase ringing level. The localized disturbance within ferrimagnetic materials is also studied, and its impact on the output waveforms is also discussed. This study can potentially open up a new and fruitful entry to explore magnetic materials and their impacts in the field of ultrafast electronics in parallel with nonlinear electrical transmission lines. [ABSTRACT FROM AUTHOR]

Spin-crossover (SC) compounds are fascinating materials that exhibit colorful phase transitions induced by temperature, pressure, photoirradiation, etc. From the microscopic point of view, the electronic (spin) state of a molecule changes between the low-spin (LS) and high-spin (HS) states by such stimuli, and a variation of the molecular size follows through the vibronic coupling between the electronic state and structure in the molecule. This causes an elastic distortion and then an elastic interaction. The elastic interaction is essential in cooperative properties of SC phenomena. In this paper, we present a tutorial study on elastic interaction models for SC phenomena, which are the recent trend of modeling of SC compounds. We focus on multistep transitions, which are a topic of SC phenomena. We analyze the phase diagrams including the metastable phases for several SC systems, in which antiferromagnetic-like and ferrimagnetic-like phases are associated in addition to the LS and HS phases. Making use of the phase diagrams, we show various patterns of thermally induced SC transition with steps. We also investigate SC transitions with steps in a core-shell SC nanocomposite composed of two different SC compounds. We focus on two cases: the core has a lower transition temperature than the shell, and the core has a higher transition temperature. We show characteristic features of difference in the two systems. [ABSTRACT FROM AUTHOR]