Search

The present study investigated the effect of co-doping with elemental crystal Ge or/and GeO 2 on the TiO 2 –Ta 2 O 5 –BaCO 3 varistor ceramic. Results showed that with the doping content of Ta 2 O 5 and BaCO 3 of 0.3 mol% and 0.2 mol%, respectively, the optimum doping content of 0.4 mol% Ge and 1.2 mol% GeO 2 exhibited the highest α value ( α = 12.1), lower breakdown voltage E B ( E B = 20.8 V mm − 1 ), lesser leakage current J L ( J L = 11.5 μA cm − 2 ), and highest grain boundary barrier Φ B ( Φ B = 0.93 eV). The microstructural analyses indicated that Ge–GeO 2 co-doping notably changed the TiO 2 –Ta 2 O 5 –BaCO 3 ceramic microstructure, increased α , and decreased E B . In addition, Ge and GeO 2 , which function as sintering aids, reduced the sintering temperature caused by the low melting point; the best sintering temperature was 1280 °C for TiO 2 –Ta 2 O 5 –BaCO 3 –Ge–GeO 2 ceramic. [ABSTRACT FROM AUTHOR]

AlCoCrFeNiCu(CeO 2) X (x=0 wt%, 0.3 wt%, 0.6 wt%, 0.9 wt%, and 1.2 wt%) HEA coatings were applied via plasma cladding technology to a 35CrMo steel surface in this investigation. Electron back-scattering diffraction (EBSD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) were used to analyze the phase composition and microstructure of the coatings. A microhardness meter, a nanoindenter, a wear test machine, and an electrochemical station were used to assess the coating performance. The findings demonstrate that the phase composition of the coatings is unaffected by the addition of CeO 2 , with all coatings consisting of FCC and BCC phases. CeO 2 was added to the coatings to refine their grain size and increase their proportion of high angle grain boundaries (HAGBs), BCC phase content, and geometrically necessary dislocation (GND) density. These improvements led to significant increases in the microhardness and wear resistance of the coatings. The 0.3 wt% CeO 2 coating has the best corrosion resistance, which is caused by a number of factors including the element distribution, grain size, content of each phase, and phase distribution of the coatings. The corrosion resistance of the coating increases and then decreases nonlinearly with increasing CeO 2 content. • The AlCoCrFeNiCu(CeO2)X HEA coatings were prepared by plasma cladding. • The coatings consist of dendrites, mainly including FCC and a little BCC phase. • A small amount of L12 phase Fe3Cr appeared at indendritic region. • Adding CeO2 can increase the hardness and wear resistance of the coatings. • Appropriate CeO2 content can improve the corrosion resistance of the coatings. [ABSTRACT FROM AUTHOR]