Search

A ballistic impact test program was conducted to provide validation data for the development of numerical models of blade out events in fabric containment systems. The impact response of two different fiber materials—Kevlar 49 (E.I. DuPont Nemours and Company) and Zylon AS (Toyobo Co., Ltd.) was studied by firing metal projectiles into dry woven fabric specimens using a gas gun. The shape, mass, orientation, and velocity of the projectile were varied and recorded. In most cases the tests were designed such that the projectile would perforate the specimen, allowing measurement of the energy absorbed by the fabric. The results for both Zylon and Kevlar presented here represent a useful set of data for the purposes of establishing and validating numerical models for predicting the response of fabrics under conditions simulating those of a jet engine blade release situation. In addition some useful empirical observations were made regarding the effects of projectile orientation and the relative performance of the different materials. [ABSTRACT FROM AUTHOR]

Coning motion has been detected in flight experiments of many spinning projectiles for decades and the stability analysis of this motion has been extensively studied recently. In this paper, a novel optimal control algorithm based on stability analyses is developed to suppress the coning motion. A Lagrangian functional is built to compute the optimal control that minimizes the coning motion for a given control cost. Then a linearized approach, which produces accurate enough control within the range of parameters considered, is proposed to reduce the computational cost. It is analytically presented that the optimal solution of this linearized optimization is unique at any given values of control cost. The analytical analysis also indicates that there exists a direct solution of the control that approaches the linearized optimal control when the control cost is small enough and that this direct solution can be obtained much more efficiently than the linearized optimal control. The controllability problem associated with this optimal control algorithm is also discussed and the results shed lights on the choice of numerical parameters in the optimization. These optimal control algorithms are implemented to calculate the optimal control that minimizes the coning motion induced by initial disturbances to a wrap-around-fin missile. [ABSTRACT FROM AUTHOR]