Search

Amid the global shift towards sustainable development, this study addresses the burgeoning electric vehicle (EV) market and its infrastructure challenges, particularly the lag in public charging facility development. Focusing on Wuhan, it utilizes big data to analyze EV charging behavior's spatiotemporal aspects and the urban environment's influence on charging efficiency. Employing a random forest regression and multiscale geographically weighted regression (MGWR), the research elucidates the nonlinear interaction between urban infrastructure and charging station usage. Key findings include (1) a direct correlation between EV charging patterns and urban temporal factors, with notable price elasticity; (2) the predominant influence of commuting distance, supplemented by the availability of fast-charging options; and (3) a strategic proposal for increasing slow-charging facilities at key urban locations to balance operational costs and user demand. The study combines spatial analysis and charging behavior to recommend enhancements in public EV charging infrastructure layouts. [ABSTRACT FROM AUTHOR]

Based on the data from two field surveys in 2015 and 2022, this paper calculates the weight of values using the entropy weight method and the variation coefficient method, and evaluates risk using the information quantity method. The information quantities of four levels of criteria (hazards, exposure, vulnerability, emergency responses, and capability of recovery) were extracted and inputted into a random forest model. After optimizing the hyperparameters of the random forest using GridSearchCV, the risk assessment was performed again. Finally, the accuracy of the two evaluation results was verified using an ROC curve, and the model with the higher AUC value was selected to create a risk map. Compared with previous studies, this paper considers the factors of emergency responses and recovery capability, which makes the risk assessment more comprehensive. Our findings show that the evaluation results based on the coupling model are more accurate than the evaluation results of the information method, as the coupling model had an AUC value of 0.9329. After considering the indices of emergency responses and capability of recovery, the risk level of the highest-risk area in the study area decreased. [ABSTRACT FROM AUTHOR]

Accurate spatial distribution of gridded gross domestic product (GDP) data is crucial for revealing regional disparities within administrative units, thus facilitating a deeper understanding of regional economic dynamics, industrial distribution, and urbanization trends. The existing GDP spatial models often rely on prediction residuals for model evaluation or utilize residual distribution to improve the final accuracy, frequently overlooking the modifiable areal unit problem within residual distribution. This paper introduces a hybrid downscaling model that combines random forest and area-to-area kriging to map gridded GDP. Employing Thailand as a case study, GDP distribution maps were generated at a 1 km spatial resolution for the year 2015 and compared with five alternative downscaling methods and an existing GDP product. The results demonstrate that the proposed approach yields higher accuracy and greater precision in detailing GDP distribution, as evidenced by the smallest mean absolute error and root mean squared error values, which stand at USD 256.458 and 699.348 ten million, respectively. Among the four different sets of auxiliary variables considered, one consistently exhibited a higher prediction accuracy. This particular set of auxiliary variables integrated classification-based variables, illustrating the advantages of incorporating such integrated variables into modeling while accounting for classification characteristics. [ABSTRACT FROM AUTHOR]

Based on a study of the spatial distribution of coffee shops in the main urban area of Beijing, the main influencing factors were selected based on the multi-source space data. Subsequently, three regression models were compared, and the best site selection model was found. A comparison was performed between the prediction model functioning with a buffer and without one, and the accuracy of the location model was verified by comparing the actual change trend and the predicted trend in two years. The following conclusions were obtained: (1) coffee shops in the main urban area of Beijing are clustered in an area within 12 km of the main urban center, and also around the core commercial agglomeration area; (2) the random forest (RF) model is the best model in this study, and the accuracy values before and after buffer analysis were 0.915 and 0.929, respectively; and (3) after verifying the accuracy of the model through two years of data, we recommend the establishment of a main road buffer zone for site selection, and the success rate of site selection was found to reach 72.97%. This study provides crucial insight for coffee shop prediction model selection and potential store location selection, which is significant to improving the layout of leisure spaces and promoting economic development. [ABSTRACT FROM AUTHOR]

Rural tourism has long been recognized as a significant strategy for promoting rural revitalization in China. Excessive development has had a number of negative consequences for rural tourism. As a result, there is a growing need to optimize the developmental framework of rural tourism in order to ensure its sustainable growth. This study focuses on key tourism villages and employs geostatistical analysis and the random forest methodology to elucidate the spatial mechanisms underlying rural tourism and identify potential areas for its development in China. The research findings reveal several important insights: (1) Key tourism villages exhibit a concentrated spatial distribution, characterized by pronounced regional disparities. (2) The intrinsic characteristics of rural areas and the conditions conducive to tourism development play pivotal roles in shaping rural tourism. Notably, cultural resources, tourism resources, rural accessibility, and tourism potential are identified as the primary influential factors. (3) Predictive modeling using random forest analysis indicates that densely populated areas in the eastern region retain the highest level of suitability for rural tourism. In contrast, the development of rural tourism in western and border regions encounters certain constraints. Additionally, the northern region encompasses larger expanses with high suitability, whereas the southern region is generally moderate. This comprehensive nationwide investigation provides valuable insights into the key aspects of rural tourism development and offers practical guidance for achieving sustainable rural tourism practices in China. [ABSTRACT FROM AUTHOR]

Black carbon (BC) is a significant source of air pollution since it impacts public health and climate change. Understanding its distribution in the complex urban environment is challenging. We integrated a land use model with four machine learning models to estimate traffic-related BC concentrations in Oakland, CA. Random Forest was the best-performing model, with regression coefficient (R2) values of 0.701 on the train set and 0.695 on the validation set with a root mean square error (RMSE) of 0.210 mg/m3. Vehicle speed and local road systems were the most sensitive variables in estimating BC concentrations. However, this approach was inefficient at identifying hyperlocal hotspots, especially in a complex urban environment where highways and truck routes are significant emission sources. Using the land use method to estimate BC concentrations may lead to underestimating some localized hotspots. This work can improve air quality exposure assessment for vulnerable populations and help emphasize potential environmental justice issues. [ABSTRACT FROM AUTHOR]

The inefficient use of urban resources and the imbalance of spatial structures make optimizing land use management a top priority in urban environmental management. Traditional land use classification systems that prioritize only natural features while disregarding human activity can result in redundancy and conflicts in urban planning. The Production–Living–Ecological Space (PLES) approach was developed as an integrated method for territorial spatial classification. However, most existing studies on PLES are conducted at provincial scales, largely overlooking fine-scale usage within cities. In addition, the existing concept of PLES has been vaguely defined, resulting in linear and simple identification methods that are not applicable to complex urban environments. To address these issues, this study proposes a method to identify urban PLES based on supervised classification using random forest models, which integrate empirical knowledge and multi-source heterogeneous information. The experiments conducted in Haikou reveal the regional aggregation of living and production spaces and the scarcity of ecological space in the city. Our study proposes a concrete concept of PLES and a method for identifying PLES that can be applied to multiple regions, providing an effective tool for the coordinated management of urban production, living, and ecological environments. [ABSTRACT FROM AUTHOR]

Land use and land cover changes driven by urban sprawl has accelerated the degradation of ecosystem services in metropolitan settlements. However, most optimisation techniques do not consider the dynamic effect of urban sprawl on the spatial criteria on which decisions are based. In addition, integrating the current simulation approach with land use optimisation approaches to make a sustainable decision regarding the suitable site encompasses complex processes. Thus, this study aims to innovate a novel technique that can predict urban sprawl for a long time and can be simply integrated with optimisation land use techniques to make suitable decisions. Three main processes were applied in this study: (1) a supervised classification process using random forest (RF), (2) prediction of urban growth using a hybrid method combining an artificial neural network and cellular automata and (3) the development of a novel machine learning (ML) model to predict urban growth boundaries (UGBs). The ML model included linear regression, RF, K-nearest neighbour and AdaBoost. The performance of the novel ML model was effective, according to the validation metrics that were measured by the four ML algorithms. The results show that the Nasiriyah City expansion (the study area) is haphazard and unplanned, resulting in disastrous effects on urban and natural systems. The urban area ratio was increased by about 10%, i.e., from 2.5% in the year 1992 to 12.2% in 2022. In addition, the city will be expanded by 34%, 25% and 19% by the years 2032, 2042 and 2052, respectively. Therefore, this novel technique is recommended for integration with optimisation land use techniques to determine the sites that would be covered by the future city expansion. [ABSTRACT FROM AUTHOR]

One hundred seventeen landslides occurred in Malang Regency throughout 2021, triggering the need for practical hazard assessments to strengthen the disaster mitigation process. In terms of providing a solution for investigating the location of landslides more precisely, this research aims to compare machine learning algorithms to produce an accurate landslide susceptibility model. This research applies three machine learning algorithms composed of RF (random forest), NB (naïve Bayes), and KNN (k-nearest neighbor) and 12 conditioning factors. The conditioning factors consist of slope, elevation, aspect, NDVI, geological type, soil type, distance from the fault, distance from the river, river density, TWI, land cover, and annual rainfall. This research performs seven models over three ratios between the training and testing dataset encompassing 50:50, 60:40, and 70:30 for KNN and NB algorithms and 70:30 for the RF algorithm. This research measures the performance of each model using eight parameters (ROC, AUC, ACC, SN, SP, BA, GM, CK, and MCC). The results indicate that RF 70:30 generates the best performance, witnessed by the evaluation parameters ACC (0.884), SN (0.765), GM (0.863), BA (0.857), CK (0.749), MCC (0.876), and AUC (0.943). Overall, seven models have reasonably good accuracy, ranging between 0.806 and 0.884. Furthermore, based on the best model, the study area is dominated by high susceptibility with an area coverage of 51%, which occurs in the areas with high slopes. This research is expected to improve the quality of landslide susceptibility maps in the study area as a foundation for mitigation planning. Furthermore, it can provide recommendations for further research in splitting ratio scenarios between training and testing data. [ABSTRACT FROM AUTHOR]

With population ageing being a notable demographic phenomenon, aging in place is an efficient model to accommodate the mounting aging needs. Based on the community scale, this study takes the 15-min community-life circle as the basic research unit to investigate the imbalanced distribution of pension resources and its influencing factors in downtown Shanghai. We obtained six types of elderly care facilities data from the Shanghai elderly care service platform and utilized the Gaussian 2-step Floating Catchment Area method to calculate the accessibility of 6-type elderly care facilities. Then, we used the Entropy Weight Method to calculate the comprehensive accessibility of elderly care facilities. The Getis–Ord Gi* method was adopted to analyze the overall distribution, identifying the well-developed and the under-developed areas. To explore the influencing factors of the distribution, this paper obtained multi-source data to construct a total of 17 indicators and established a Random Forest model to identify the feature importance. With the selected eight factors, the Geographically Weighted Regression (GWR) model was applied to study the spatial heterogeneity of influencing factors, and the model showed a good performance with the AdjR2 being 0.8364. The findings of this research reveal the following: (1) The distribution of six types of elderly care facilities is extremely uneven, with obvious spatial aggregation characteristics. Amongst the seven administrative regions, Huangpu District has the best accessibility to pension resources, while the resources in the other six regions are highly inadequate. (2) Essential influencing factors of the comprehensive accessibility of community-based elderly care facilities are accessibility of nursing institutions (positive), hotel density (positive), catering density (negative), education density (positive) and medical density (negative), while "rents", "plot ratio" and "building density" have little impact on comprehensive accessibility. (3) The results of GWR revealed that the eight indicators are heterogeneous in space, all of which have bidirectional effects on comprehensive accessibility. By investigating the spatial distribution patterns and influencing factors of pension resources in Shanghai, this research could further contribute to establishing a sound community-based elderly care service system that improves older adults' quality of life and promotes social fairness and justice. [ABSTRACT FROM AUTHOR]

The aim of this paper is to present developments of an advanced geospatial analytics algorithm that improves the prediction power of a random forest regression model while addressing the issue of spatial dependence commonly found in geographical data. We applied the methodology to a simple model of mean household income in the European Union regions to allow easy understanding and reproducibility of the analysis. The results are encouraging and suggest an improvement in the prediction power compared to previous techniques. The algorithm has been implemented in R and is available in the updated version of the SpatialML package in the CRAN repository. [ABSTRACT FROM AUTHOR]

Mapping of landslides, conducted in 2021 by the Geological Survey of Denmark and Greenland (GEUS), revealed 3202 landslides in Denmark, indicating that they might pose a bigger problem than previously acknowledged. Moreover, the changing climate is assumed to have an impact on landslide occurrences in the future. The aim of this study is to conduct the first landslide susceptibility mapping (LSM) in Denmark, reducing the geographical bias existing in LSM studies, and to identify areas prone to landslides in the future following representative concentration pathway RCP8.5, based on a set of explanatory variables in an area of interest located around Vejle Fjord, Jutland, Denmark. A subset from the landslide inventory provided by GEUS is used as ground truth data. Three well-established machine learning (ML) algorithms—Random Forest, Support Vector Machine, and Logistic Regression—were trained to classify the data samples as landslide or non-landslide, treating the ML task as a binary classification and expressing the results in the form of a probability in order to produce susceptibility maps. The classification results were validated through the test data and through an external data set for an area located outside of the region of interest. While the high predictive performance varied slightly among the three models on the test data, the LR and SVM demonstrated inferior accuracy outside of the study area. The results show that the RF model has robustness and potential for applicability in landslide susceptibility mapping in low-lying landscapes of Denmark in the present. The conducted mapping can become a step forward towards planning for mitigative and protective measures in landslide-prone areas in Denmark, providing policy-makers with necessary decision support. However, the map of the future climate change scenario shows the reduction of the susceptible areas, raising the question of the choice of the climate models and variables in the analysis. [ABSTRACT FROM AUTHOR]

Landslide susceptibility assessment serves as a critical scientific reference for geohazard control, land use, and sustainable development planning. The existing research has not fully considered the potential impact of the spatial agglomeration and dispersion of landslides on assessments. This issue may cause a systematic evaluation bias when the field investigation data are insufficient, which is common due to limited human resources. Accordingly, this paper proposes two novel strategies, including a clustering algorithm and a preprocessing method, for these two ignored features to strengthen assessments, especially in high-susceptibility regions. Multiple machine learning models are compared in a case study of the city of Bijie (Guizhou Province, China). Then we generate the optimal susceptibility map and conduct two experiments to test the validity of the proposed methods. The primary conclusions of this study are as follows: (1) random forest (RF) was superior to other algorithms in the recognition of high-susceptibility areas and the portrayal of local spatial features; (2) the susceptibility map incorporating spatial feature messages showed a noticeable improvement over the spatial distribution and gradual change of susceptibility, as well as the accurate delineation of critical hazardous areas and the interpretation of historical hazards; and (3) the spatial distribution feature had a significant positive effect on modeling, as the accuracy increased by 5% and 10% after including the spatial agglomeration and dispersion consideration in the RF model, respectively. The benefit of the agglomeration is concentrated in high-susceptibility areas, and our work provides insight to improve the assessment accuracy in these areas, which is critical to risk assessment and prevention activities. [ABSTRACT FROM AUTHOR]

This paper aims to present possible areas to plant different vegetation types near traffic jams to reduce air pollution in the capital of Croatia, the city of Zagreb. Based on main traffic road and random forest machine learning using WorldView-2 European cities data, potential areas are established. It is seen that, based on a 10 m buffer, there is a possible planting area of more than 220,000 square meters, and based on 15 m buffer, there is a possible planting area of more than 410,000 square meters. The proposed plants are Viburnum lucidum, Photinia x fraseri, Euonymus japonicus, Tilia cordata, Aesculus hippocastanum, Pinus sp., Taxus baccata, Populus alba, Quercus robur, Betula pendula, which are characteristic for urban areas in Croatia. The planting of proposed trees may result in an increase of 3–5% in the total trees in the city of Zagreb. Although similar research has been published, this paper presents novelty findings from combined machine learning methods for defining green urban areas. Additionally, this paper presents original results for this region. [ABSTRACT FROM AUTHOR]

The classification of unmanned aerial vehicle hyperspectral images is of great significance in agricultural monitoring. This paper studied a fine classification method for crops based on feature transform combined with random forest (RF). Aiming at the problem of a large number of spectra and a large amount of calculation, three feature transform methods for dimensionality reduction, minimum noise fraction (MNF), independent component analysis (ICA), and principal component analysis (PCA), were studied. Then, RF was used to finely classify a variety of crops in hyperspectral images. The results showed: (1) The MNF–RF combination was the best ideal classification combination in this study. The best classification accuracies of the MNF–RF random sample set in the Longkou and Honghu areas were 97.18% and 80.43%, respectively; compared with the original image, the RF classification accuracy was improved by 6.43% and 8.81%, respectively. (2) For this study, the overall classification accuracy of RF in the two regions was positively correlated with the number of random sample points. (3) The image after feature transform was less affected by the number of sample points than the original image. The MNF transform curve of the overall RF classification accuracy in the two regions varied with the number of random sample points but was the smoothest and least affected by the number of sample points, followed by the PCA transform and ICA transform curves. The overall classification accuracies of MNF–RF in the Longkou and Honghu areas did not exceed 0.50% and 3.25%, respectively, with the fluctuation of the number of sample points. This research can provide reference for the fine classification of crops based on UAV-borne hyperspectral images. [ABSTRACT FROM AUTHOR]

Point cloud semantic segmentation has played an important role in the scan-to-BIM process of the Ming and Qing Dynasties' official-style architecture roof. To overcome the complexity of roof components' shape and the scale differences between different roof component types, a point cloud semantic segmentation method for the MQDOAs roof considering the construction regulations is proposed in this paper. This method is composed of two stages. In the first stage, the features from the construction rules of MQDOAs, including the normalized symmetrical distance (NSD), relative height (RH) and local height difference (LHD), are extracted alongside the regular geometric features. To lower the influence of scale differences, a multi-scale feature connection strategy is also applied to construct the feature classification vector. In the second stage, RF method is applied to classify the point cloud. To verify the efficiency of the proposed method, we took the Hall of Complete Harmony as the study case. The experiments showed that our method achieved segmentation result in overall classification accuracy and reached 96.8%. [ABSTRACT FROM AUTHOR]

The indoor location of individuals is a key contextual variable for commercial and assisted location-based services and applications. Commercial centers and medical buildings (e.g., hospitals) require location information of their users/patients to offer the services that are needed at the correct moment. Several approaches have been proposed to tackle this problem. In this paper, we present the development of an indoor location system which relies on the human activity recognition approach, using sound as an information source to infer the indoor location based on the contextual information of the activity that is realized at the moment. In this work, we analyze the sound information to estimate the location using the contextual information of the activity. A feature extraction approach to the sound signal is performed to feed a random forest algorithm in order to generate a model to estimate the location of the user. We evaluate the quality of the resulting model in terms of sensitivity and specificity for each location and we also perform out-of-bag error estimation. Our experiments were carried out in five representative residential homes. Each home had four individual indoor rooms. Eleven activities (brewing coffee, cooking, eggs, taking a shower, etc.) were performed to provide the contextual information. Experimental results show that developing an indoor location system (ILS) that uses contextual information from human activities (identified with data provided from the environmental sound) can achieve an estimation that is 95% correct. [ABSTRACT FROM AUTHOR]

As an intermediate step between raw remote sensing data and digital maps, remote sensing data classification has been a challenging and long-standing problem in the remote sensing research community. In this work, an automated and effective supervised classification framework is presented for classifying high-resolution remote sensing data. Specifically, the presented method proceeds in three main stages: feature extraction, classification, and classified result refinement. In the feature extraction stage, both multispectral images and 3D geometry data are used, which utilizes the complementary information from multisource data. In the classification stage, to tackle the problems associated with too many training samples and take full advantage of the information in the large-scale dataset, a random forest (RF) ensemble learning strategy is proposed by combining several RF classifiers together. Finally, an improved fully connected conditional random field (FCCRF) graph model is employed to derive the contextual information to refine the classification results. Experiments on the ISPRS Semantic Labeling Contest dataset show that the presented 3-stage method achieves 86.9% overall accuracy, which is a new state-of-the-art non-CNN (convolutional neural networks)-based classification method. [ABSTRACT FROM AUTHOR]

The increased feature space available in object-based classification environments (e.g., extended spectral feature sets per object, shape properties, or textural features) has a high potential of improving classifications. However, the availability of a large number of derived features per segmented object can also lead to a time-consuming and subjective process of optimizing the feature subset. The objectives of this study are to evaluate the effect of the advanced feature selection methods of popular supervised classifiers (Support Vector Machines (SVM) and Random Forest (RF)) for the example of object-based mapping of an agricultural area using Unmanned Aerial Vehicle (UAV) imagery, in order to optimize their usage for object-based agriculture pattern recognition tasks. In this study, several advanced feature selection methods were divided into both types of classifiers (SVM and RF) to conduct further evaluations using five feature-importance-evaluation methods and three feature-subset-evaluation methods. A visualization method was used to measure the change pattern of mean classification accuracy with the increase of features used, and a two-tailed t-test was used to determine the difference between two population means for both repeated ten classification accuracies. This study mainly contribute to the uncertainty analysis of feature selection for object-based classification instead of the per-pixel method. The results highlight that the RF classifier is relatively insensitive to the number of input features, even for a small training set size, whereby a negative impact of feature set size on the classification accuracy of the SVM classifier was observed. Overall, the SVM Recursive Feature Elimination (SVM-RFE) seems to be an appropriate method for both groups of classifiers, while the Correlation-based Feature Selection (CFS) is the best feature-subset-evaluation method. Most importantly, this study verified that feature selection for both classifiers is crucial for the evolving field of Object-based Image Analysis (OBIA): It is highly advisable for feature selection to be performed before object-based classification, even though an adverse impact could sometimes be observed from the wrapper methods. [ABSTRACT FROM AUTHOR]

Sustainable urban planning and management require reliable land change models, which can be used to improve decision making. The objective of this study was to test a random forest-cellular automata (RF-CA) model, which combines random forest (RF) and cellular automata (CA) models. The Kappa simulation (KSimulation), figure of merit, and components of agreement and disagreement statistics were used to validate the RF-CA model. Furthermore, the RF-CA model was compared with support vector machine cellular automata (SVM-CA) and logistic regression cellular automata (LR-CA) models. Results show that the RF-CA model outperformed the SVM-CA and LR-CA models. The RF-CA model had a Kappa simulation (KSimulation) accuracy of 0.51 (with a figure of merit statistic of 47%), while SVM-CA and LR-CA models had a KSimulation accuracy of 0.39 and -0.22 (with figure of merit statistics of 39% and 6%), respectively. Generally, the RF-CA model was relatively accurate at allocating "non-built-up to built-up" changes as reflected by the correct "non-built-up to built-up" components of agreement of 15%. The performance of the RF-CA model was attributed to the relatively accurate RF transition potential maps. Therefore, this study highlights the potential of the RF-CA model for simulating urban growth. [ABSTRACT FROM AUTHOR]

Satellite retrieval can offer global soil moisture information, such as Advanced Microwave Scanning Radiometer-Earth Observing System (AMSR-E) data. AMSR-E has been used to provide soil moisture all over the world, with a coarse resolution of 25 km × 25 km. The coarse resolution of the soil moisture dataset often hinders its use in local or regional research. This work proposes a new framework based on the random forest (RF) model while using five auxiliary data to downscale the AMSR-E soil moisture data over North China. The downscaled results with a 1 km spatial resolution are verified against in situ measurements. Compared with AMSR-E data, the correlation coefficient of the downscaled data is increased by 0.17, and the root mean squared error, mean absolute error, and unbiased root mean square error are reduced by 0.02, 0.01, and 0.03 m3/m3, respectively. In addition, the comparison results with Multiple Linear Regression and Support Vector Regression downscaled data show that the proposed method significantly outperforms the other two methods. The feasibility of our model is well supported by the importance analysis and leave-one-out analysis. Our study, which combines RF with spatiotemporal search algorithms and efficient auxiliary data, may provide insights into soil moisture downscaling in large areas with various surface characteristics and climatic conditions. [ABSTRACT FROM AUTHOR]

During the COVID-19 lockdown in Wuhan, transportation, industrial production and other human activities declined significantly, as did the NO2 concentration. In order to assess the relative contributions of different factors to reductions in air pollutants, we implemented sensitivity experiments by Random Forest (RF) models, with the comparison of the contributions of meteorological conditions, human mobility, and emissions from industry and households between different periods. In addition, we conducted scenario analyses to suggest an appropriate limit for control of human mobility. Different mechanisms for air pollutants were shown in the pre-pandemic, pre-lockdown, lockdown, and post-pandemic periods. Wind speed and the Within-city Migration index, representing intra-city mobility intensity, were excluded from stepwise multiple linear models in the pre-lockdown and lockdown periods. The results of sensitivity experiments show that, in the COVID-19 lockdown period, 73.3% of the reduction can be attributed to decreased human mobility. In the post-pandemic period, meteorological conditions control about 42.2% of the decrease, and emissions from industry and households control 40.0%, while human mobility only contributes 17.8%. The results of the scenario analysis suggest that the priority of restriction should be given to human mobility within the city than other kinds of human mobility. The reduction in the NO2 concentration tends to be smaller when human mobility within the city decreases by more than 70%. A limit of less than 40% on the control of the human mobility can achieve a better effect, especially in cities with severe traffic pollution. [ABSTRACT FROM AUTHOR]

There are many factors affecting poverty, among which education is an important one. Firstly, from the perspective of digital statistics, this research quantitatively analyzes the correlation between average education years (AEY) and Gross Domestic Product per capita (GDP/C), and finds that there is a significant positive correlation between AEY and GDP/C in provinces of China. Furthermore, from the perspective of spatial distribution and geostatistics, this research analyzes the correlation between AEY and the distribution of poor counties, revealing the inherent connection between education and poverty. Based on the data processing of nighttime light remote sensing images, this research adopts the machine learning method of random forest to extract the distribution status of spatio-temporal sequences for poor counties. Through the analysis, it is found that poor counties are characterized by centralized distribution and spatial autocorrelation spatially, and the number of poor counties decreases year by year in temporal evolution. On this basis, we analyze the correlation between education levels and the distribution of poor counties. It is found that, on the spatial scale, AEY in poor counties is relatively low, while AEY in non-poor counties is relatively high, showing a significant negative correlation between the two. On the temporal scale, the number of poor counties gradually decreased from 2000 to 2010, and at the same time, the education levels of poor counties also gradually improved. Finally, from the perspective of improving education levels to promote poverty elimination, we analyze the main factors affecting education using Principal Component Analysis (PCA) and other methods and obtain a regression model. This research proposes the Linear and Residual Integration Model (LRIM) to more accurately predict AEY in each province in 2020 based on historical data, and identifies the regions with low AEY as key regions for targeted poverty alleviation through education (TPAE) in the future. This research provides a decision-making basis to achieve TPAE means, helping to achieve the victory of the national education poverty elimination battle. [ABSTRACT FROM AUTHOR]

Shallow groundwater is a key resource for human activities and ecosystems, and is susceptible to alterations caused by climate change, causing negative socio-economic and environmental impacts, and increasing the need to predict the evolution of the water table. The main objective of this study is to gain insights about future water level changes based on different climate change scenarios using machine learning algorithms, while addressing the following research questions: (a) how will the water table be affected by climate change in the future based on different socio-economic pathways (SSPs)?: (b) do machine learning models perform well enough in predicting changes of the groundwater in Denmark? If so, which ML model outperforms for forecasting these changes? Three ML algorithms were used in R: artificial neural networks (ANN), support vector machine (SVM) and random forest (RF). The ML models were trained with time-series data of groundwater levels taken at wells in the Hovedstaden region, for the period 1990–2018. Several independent variables were used to train the models, including different soil parameters, topographical features and climatic variables for the time period and region selected. Results show that the RF model outperformed the other two, resulting in a higher R-squared and lower mean absolute error (MAE). The future prediction maps for the different scenarios show little variation in the water table. Nevertheless, predictions show that it will rise slightly, mostly in the order of 0–0.25 m, especially during winter. The proposed approach in this study can be used to visualize areas where the water levels are expected to change, as well as to gain insights about how big the changes will be. The approaches and models developed with this paper could be replicated and applied to other study areas, allowing for the possibility to extend this model to a national level, improving the prevention and adaptation plans in Denmark and providing a more global overview of future water level predictions to more efficiently handle future climate change scenarios. [ABSTRACT FROM AUTHOR]

We studied trip purpose imputation using data mining and machine learning techniques based on a dataset of GPS-based trajectories gathered in Switzerland. With a large number of labeled activities in eight categories, we explored location information using hierarchical clustering and achieved a classification accuracy of 86.7% using a random forest approach as a baseline. The contribution of this study is summarized below. Firstly, using information from GPS trajectories exclusively without personal information shows a negligible decrease in accuracy (0.9%), which indicates the good performance of our data mining steps and the wide applicability of our imputation scheme in case of limited information availability. Secondly, the dependence of model performance on the geographical location, the number of participants, and the duration of the survey is investigated to provide a reference when comparing classification accuracy. Furthermore, we show the ensemble filter to be an excellent tool in this research field not only because of the increased accuracy (93.6%), especially for minority classes, but also the reduced uncertainties in blindly trusting the labeling of activities by participants, which is vulnerable to class noise due to the large survey response burden. Finally, the trip purpose derivation accuracy across participants reaches 74.8%, which is significant and suggests the possibility of effectively applying a model trained on GPS trajectories of a small subset of citizens to a larger GPS trajectory sample. [ABSTRACT FROM AUTHOR]

A water regime type is a cumulative representation of seasonal runoff variability in a textual, qualitative, or quantitative form developed for a particular period. The assessment of the respective water regime type changes is of high importance for local communities and water management authorities, increasing their awareness and opening strategies for adaptation. In the presented study, we trained a machine learning model—the Random Forest classifier—to predict water regime types in northwest Russia based on monthly climatological hydrographs derived for a historical period (1979–1991). Evaluation results show the high efficiency of the trained model with an accuracy of 91.6%. Then, the Random Forest model was used to predict water regime types based on runoff projections for the end of the 21st century (2087–2099) forced by four different General Circulation Models (GCM) and three Representative Concentration Pathway scenarios (RCP). Results indicate that climate is expected to modify water regime types remarkably. There are two primary directions of projected changes. First, we detect the tendency towards less stable summer and winter flows. The second direction is towards a shift in spring flood characteristics. While spring flooding is expected to remain the dominant phase of the water regime, the flood peak is expected to shift towards earlier occurrence and lower magnitude. We identified that the projected changes in water regime types are more pronounced in more aggressive RCP scenarios. [ABSTRACT FROM AUTHOR]

Land cover (LC) is a crucial parameter for studying environmental phenomena. Cutting-edge technology such as remote sensing (RS) and cloud computing have made LC change mapping efficient. In this study, the LC of Rupandehi District of Nepal were mapped using Landsat imagery and Random Forest (RF) classifier from 2005 to 2020 using Google Earth Engine (GEE) platform. GEE eases the way in extracting, analyzing, and performing different operations for the earth's observed data. Land cover classification, Centre of gravity (CoG), and their trajectories for all LC classes: agriculture, built-up, water, forest, and barren area were extracted with five-year intervals, along with their Ecosystem service values (ESV) to understand the load on the ecosystem. We also discussed the aspects and problems of the spatiotemporal analysis of developing regions. It was observed that the built-up areas had been increasing over the years and more centered in between the two major cities. Other agriculture, water, and forest classes had been subjected to fluctuations with barren land in the decreasing trend. This alteration in the area of the LC classes also resulted in varying ESVs for individual land cover and total values for the years. The accuracy for the RF classifier was under substantial agreement for such fragmented LCs. Using LC, CoG, and ESV, the paper discusses the need for spatiotemporal analysis studies in Nepal to overcome the current limitations and later expansion to other regions. Studies such as these help in implementing proper plans and strategies by district administration offices and local governmental bodies to stop the exploitation of resources. [ABSTRACT FROM AUTHOR]

Soil Moisture Deficit (SMD) is a key indicator of soil water content changes and is valuable to a variety of applications, such as weather and climate, natural disasters, agricultural water management, etc. Soil Moisture and Ocean Salinity (SMOS) is a dedicated mission focused on soil moisture retrieval and can be utilized for SMD estimation. In this study, the use of soil moisture derived from SMOS has been provided for the estimation of SMD at a catchment scale. Several approaches for the estimation of SMD are implemented herein, using algorithms such as Random Forests (RF) and Genetic Algorithms coupled with Least Trimmed Squares (GALTS) regression. The results show that for SMD estimation, the RF algorithm performed best as compared to the GALTS, with Root Mean Square Errors (RMSEs) of 0.021 and 0.024, respectively. All in all, our study findings can provide important assistance towards developing the accuracy and applicability of remote sensing-based products for operational use. [ABSTRACT FROM AUTHOR]

The simulation of future land use can provide decision support for urban planners and decision makers, which is important for sustainable urban development. Using a cellular automata-random forest model, we considered two scenarios to predict intra-land use changes in Kumamoto City from 2018 to 2030: an unconstrained development scenario, and a planning-constrained development scenario that considers disaster-related factors. The random forest was used to calculate the transition probabilities and the importance of driving factors, and cellular automata were used for future land use prediction. The results show that disaster-related factors greatly influence land vacancy, while urban planning factors are more important for medium high-rise residential, commercial, and public facilities. Under the unconstrained development scenario, urban land use tends towards spatially disordered growth in the total amount of steady growth, with the largest increase in low-rise residential areas. Under the planning-constrained development scenario that considers disaster-related factors, the urban land area will continue to grow, albeit slowly and with a compact growth trend. This study provides planners with information on the relevant trends in different scenarios of land use change in Kumamoto City. Furthermore, it provides a reference for Kumamoto City's future post-disaster recovery and reconstruction planning. [ABSTRACT FROM AUTHOR]

As of March 2021, the State of Florida, U.S.A. had accounted for approximately 6.67% of total COVID-19 (SARS-CoV-2 coronavirus disease) cases in the U.S. The main objective of this research is to analyze mobility patterns during a three month period in summer 2020, when COVID-19 case numbers were very high for three Florida counties, Miami-Dade, Broward, and Palm Beach counties. To investigate patterns, as well as drivers, related to changes in mobility across the tri-county region, a random forest regression model was built using sociodemographic, travel, and built environment factors, as well as COVID-19 positive case data. Mobility patterns declined in each county when new COVID-19 infections began to rise, beginning in mid-June 2020. While the mean number of bar and restaurant visits was lower overall due to closures, analysis showed that these visits remained a top factor that impacted mobility for all three counties, even with a rise in cases. Our modeling results suggest that there were mobility pattern differences between counties with respect to factors relating, for example, to race and ethnicity (different population groups factored differently in each county), as well as social distancing or travel-related factors (e.g., staying at home behaviors) over the two time periods prior to and after the spike of COVID-19 cases. [ABSTRACT FROM AUTHOR]

Seagrass provides a wide range of essential ecosystem services, supports climate change mitigation, and contributes to blue carbon sequestration. This resource, however, is undergoing significant declines across the globe, and there is an urgent need to develop change detection techniques appropriate to the scale of loss and applicable to the complex coastal marine environment. Our work aimed to develop remote-sensing-based techniques for detection of changes between 1990 and 2019 in the area of seagrass meadows in Tauranga Harbour, New Zealand. Four state-of-the-art machine-learning models, Random Forest (RF), Support Vector Machine (SVM), Extreme Gradient Boost (XGB), and CatBoost (CB), were evaluated for classification of seagrass cover (presence/absence) in a Landsat 8 image from 2019, using near-concurrent Ground-Truth Points (GTPs). We then used the most accurate one of these models, CB, with historic Landsat imagery supported by classified aerial photographs for an estimation of change in cover over time. The CB model produced the highest accuracies (precision, recall, F1 scores of 0.94, 0.96, and 0.95 respectively). We were able to use Landsat imagery to document the trajectory and spatial distribution of an approximately 50% reduction in seagrass area from 2237 ha to 1184 ha between the years 1990–2019. Our illustration of change detection of seagrass in Tauranga Harbour suggests that machine-learning techniques, coupled with historic satellite imagery, offers potential for evaluation of historic as well as ongoing seagrass dynamics. [ABSTRACT FROM AUTHOR]

Urban functional regions are essential information in parsing urban spatial structure. The rapid and accurate identification of urban functional regions is important for improving urban planning and management. Thanks to its low cost and fast data update characteristics, the Point of Interest (POI) is one of the most common types of open access data. It mainly identifies urban functional regions by analyzing the potential correlation between POI data and the regions. Even though this is an important manifestation of the functional region, the spatial correlation between regions is rarely considered in previous studies. In order to extract the spatial semantic information among regions, a new model, called the Block2vec, is proposed by using the idea of the Skip-gram framework. The Block2vec model maps the spatial correlation between the POIs, as well as the regions, to a high-dimensional vector, in which classification of urban functional regions can be better performed. The results from cluster analysis showed that the high-dimensional vector extracted can well distinguish the regions with different functions. The random forests classification result (Overall accuracy = 0.7186, Kappa = 0.6429) illustrated the effectiveness of the proposed method. This study also verified the potential of the sentence embedding model in the semantic information extraction of POIs. [ABSTRACT FROM AUTHOR]

The dwarf eelgrass Zostera noltei Hornemann (Z. noltei) is the most dominant seagrass in semi-enclosed coastal systems of the Atlantic coast of Morocco. The species is experiencing a worldwide decline and monitoring the extent of its meadows would be a useful approach to estimate the impacts of natural and anthropogenic stressors. Here, we aimed to map the Z. noltei meadows in the Merja Zerga coastal lagoon (Atlantic coast of Morocco) using remote sensing. We used a random forest algorithm combined with field data to classify a SPOT 7 satellite image. Despite the difficulties related to the non-synchronization of the satellite images with the high tide coefficient, our results revealed, with an accuracy of 95%, that dwarf eelgrass beds can be discriminated successfully from other habitats in the lagoon. The estimated area was 160.76 ha when considering mixed beds (Z. noltei-associated macroalgae). The use of SPOT 7 satellite images seems to be satisfactory for long-term monitoring of Z. noltei meadows in the Merja Zerga lagoon and for biomass estimation using an NDVI–biomass quantitative relationship. Nevertheless, using this method of biomass estimation for dwarf eelgrass meadows could be unsuccessful when it comes to areas where the NDVI is saturated due to the stacking of many layers. [ABSTRACT FROM AUTHOR]

Slope failure probabilistic models generated using random forest (RF) machine learning (ML), manually interpreted incident points, and light detection and ranging (LiDAR) digital terrain variables are assessed for predicting and generalizing to new geographic extents. Specifically, models for four Major Land Resource Areas (MLRAs) in the state of West Virginia in the United States (US) were created. All region-specific models were then used to predict withheld validation data within all four MLRAs. For all validation datasets, the model trained using data from the same MLRA provided the highest reported overall accuracy (OA), Kappa statistic, F1 Score, area under the receiver operating characteristic curve (AUC ROC), and area under the precision-recall curve (AUC PR). However, the model from the same MLRA as the validation dataset did not always provide the highest precision, recall, and/or specificity, suggesting that models extrapolated to new geographic extents tend to either overpredict or underpredict the land area of slope failure occurrence whereas they offer a better balance between omission and commission error within the region in which they were trained. This study highlights the value of developing region-specific inventories, models, and high resolution and detailed digital elevation data, since models may not generalize well to new geographic extents, potentially resulting from spatial heterogeneity in landscape and/or slope failure characteristics. [ABSTRACT FROM AUTHOR]

Landslide hazards affect the security of human life and property. Mapping the spatial distribution of landslide hazard risk is critical for decision-makers to implement disaster prevention measures. This study aimed to predict and zone landslide hazard risk, using Guixi County in eastern Jiangxi, China, as an example. An integrated dataset composed of 21 geo-information layers, including lithology, rainfall, altitude, slope, distances to faults, roads and rivers, and thickness of the weathering crust, was used to achieve the aim. Non-digital layers were digitized and assigned weights based on their landslide propensity. Landslide locations and non-risk zones (flat areas) were both vectorized as polygons and randomly divided into two groups to create a training set (70%) and a validation set (30%). Using this training set, the Random Forests (RF) algorithm, which is known for its accurate prediction, was applied to the integrated dataset for risk modeling. The results were assessed against the validation set. Overall accuracy of 91.23% and Kappa Coefficient of 0.82 were obtained. The calculated probability for each pixel was consequently graded into different zones for risk mapping. Hence, we conclude that landslide risk zoning using the RF algorithm can serve as a pertinent reference for local government in their disaster prevention and early warning measures. [ABSTRACT FROM AUTHOR]

As soil erosion is still a global threat to soil resources, the estimation of soil loss, particularly at a spatiotemporal setting, is still an existing challenge. The primary aim of our study is the assessment of changes in soil erosion potential in Hungary from 1990 to 2018, induced by the changes in land use and land cover based on CORINE Land Cover data. The modeling scheme included the application and cross-valuation of two internationally applied methods, the Universal Soil Loss Equation (USLE) and the Pan-European Soil Erosion Risk Assessment (PESERA) models. Results indicate that the changes in land cover resulted in a general reduction in predicted erosion rates, by up to 0.28 t/ha/year on average. Analysis has also revealed that the combined application of the two models has reduced the occurrence of extreme predictions, thus, increasing the robustness of the method. Random Forest regression analysis has revealed that the differences between the two models are mainly driven by their sensitivity to slope and land cover, followed by soil parameters. The resulting spatial predictions can be readily applied for qualitative spatial analysis. However, the question of extreme predictions still indicates that quantitative use of the output results should only be carried out with sufficient care. [ABSTRACT FROM AUTHOR]

The rise of Google Earth Engine, a cloud computing platform for spatial data, has unlocked seamless integration for multi-sensor and multi-temporal analysis, which is useful for the identification of land-cover classes based on their temporal characteristics. Our study aims to employ temporal patterns from monthly-median Sentinel-1 (S1) C-band synthetic aperture radar data and cloud-filled monthly spectral indices, i.e., Normalized Difference Vegetation Index (NDVI), Modified Normalized Difference Water Index (MNDWI), and Normalized Difference Built-up Index (NDBI), from Landsat 8 (L8) OLI for mapping rice cropland areas in the northern part of Central Java Province, Indonesia. The harmonic function was used to fill the cloud and cloud-masked values in the spectral indices from Landsat 8 data, and smile Random Forests (RF) and Classification And Regression Trees (CART) algorithms were used to map rice cropland areas using a combination of monthly S1 and monthly harmonic L8 spectral indices. An additional terrain variable, Terrain Roughness Index (TRI) from the SRTM dataset, was also included in the analysis. Our results demonstrated that RF models with 50 (RF50) and 80 (RF80) trees yielded better accuracy for mapping the extent of paddy fields, with user accuracies of 85.65% (RF50) and 85.75% (RF80), and producer accuracies of 91.63% (RF80) and 93.48% (RF50) (overall accuracies of 92.10% (RF80) and 92.47% (RF50)), respectively, while CART yielded a user accuracy of only 84.83% and a producer accuracy of 80.86%. The model variable importance in both RF50 and RF80 models showed that vertical transmit and horizontal receive (VH) polarization and harmonic-fitted NDVI were identified as the top five important variables, and the variables representing February, April, June, and December contributed more to the RF model. The detection of VH and NDVI as the top variables which contributed up to 51% of the Random Forest model indicated the importance of the multi-sensor combination for the identification of paddy fields. [ABSTRACT FROM AUTHOR]

Mapping population distribution at fine resolutions with high accuracy is crucial to urban planning and management. This paper takes Guangzhou city as the study area, illustrates the gridded population distribution map by using machine learning methods based on zoning strategy with multisource geospatial data such as night light remote sensing data, point of interest data, land use data, and so on. The street-level accuracy evaluation results show that the proposed approach achieved good overall accuracy, with determinant coefficient (R2) being 0.713 and root mean square error (RMSE) being 5512.9. Meanwhile, the goodness of fit for single linear regression (LR) model and random forest (RF) regression model are 0.0039 and 0.605, respectively. For dense area, the accuracy of the random forest model is better than the linear regression model, while for sparse area, the accuracy of the linear regression model is better than the random forest model. The results indicated that the proposed method has great potential in fine-scale population mapping. Therefore, it is advised that the zonal modeling strategy should be the primary choice for solving regional differences in the population distribution mapping research. [ABSTRACT FROM AUTHOR]

The accurate and timely access to the spatial distribution information of crops is of great importance for agricultural production management. Although widely used, supervised classification mapping requires a large number of field samples, and is consequently costly in terms of time and money. In order to reduce the need for sample size, this paper proposes an unsupervised classification method based on principal components isometric binning (PCIB). In particular, principal component analysis (PCA) dimensionality reduction is applied to the classification features, followed by the division of the top k principal components into equidistant bins. Bins of the same category are subsequently merged as a class label. Multitemporal Gaofen 1 satellite (GF-1) remote sensing images were collected over the southwest of Hulin City and Luobei County of Hegang City, Heilongjiang Province, China in order to map crop types in 2016 and 2017. Our proposed method was compared with commonly used classifiers (random forest, K-means and Iterative Self-Organizing Data Analysis Techniques Algorithm (ISODATA)). Results demonstrate PCIB and random forest to have the highest classification accuracies, reaching 82% in 2016 in the southwest of Hulin City. In Luobei County in 2016, the accuracies of PCIB and random forest were determined as 81% and 82%, respectively. It can be concluded that the overall accuracy of our proposed method meets the basic requirements of classification accuracy. Despite exhibiting a lower accuracy than that of random forest, PCIB does not require a large field sample size, thus making it more suitable for large-scale crop mapping. [ABSTRACT FROM AUTHOR]

With the development of machine learning technology, research cases for spatial estimation through machine learning approach (MLA) in addition to the traditional geostatistical techniques are increasing. MLA has the advantage that spatial estimation is possible without stationary hypotheses of data, but it is possible for the prediction results to ignore spatial autocorrelation. In recent studies, it was considered by using a distance matrix instead of raw coordinates. Although, the performance of spatial estimation could be improved through this approach, the computational complexity of MLA increased rapidly as the number of sample points increased. In this study, we developed a method to reduce the computational complexity of MLA while considering spatial autocorrelation. Principal component analysis is applied to it for extracting spatial features and reducing dimension of inputs. To verify the proposed approach, indicator Kriging was used as a benchmark model, and each performance of MLA was compared when using raw coordinates, distance vector, and spatial features extracted from distance vector as inputs. The proposed approach improved the performance compared to previous MLA and showed similar performance compared with Kriging. We confirmed that extracted features have characteristics of rigid classification in spatial estimation; on this basis, we conclude that the model could improve performance. [ABSTRACT FROM AUTHOR]

Landslides impact on human activities and socio-economic development, especially in mountainous areas. This study focuses on the comparison of the prediction capability of advanced machine learning techniques for the rainfall-induced shallow landslide susceptibility of Deokjeokri catchment and Karisanri catchment in South Korea. The influencing factors for landslides, i.e., topographic, hydrologic, soil, forest, and geologic factors, are prepared from various sources based on availability, and a multicollinearity test is also performed to select relevant causative factors. The landslide inventory maps of both catchments are obtained from historical information, aerial photographs and performed field surveys. In this study, Deokjeokri catchment is considered as a training area and Karisanri catchment as a testing area. The landslide inventories contain 748 landslide points in training and 219 points in testing areas. Three landslide susceptibility maps using machine learning models, i.e., Random Forest (RF), Extreme Gradient Boosting (XGBoost) and Deep Neural Network (DNN), are prepared and compared. The outcomes of the analyses are validated using the landslide inventory data. A receiver operating characteristic curve (ROC) method is used to verify the results of the models. The results of this study show that the training accuracy of RF is 0.756 and the testing accuracy is 0.703. Similarly, the training accuracy of XGBoost is 0.757 and testing accuracy is 0.74. The prediction of DNN revealed acceptable agreement between the susceptibility map and the existing landslides, with a training accuracy of 0.855 and testing accuracy of 0.802. The results showed that the DNN model achieved lower prediction error and higher accuracy results than other models for shallow landslide modeling in the study area. [ABSTRACT FROM AUTHOR]

Accurate house price forecasts are very important for formulating national economic policies. In this paper, we offer an effective method to predict houses' sale prices. Our algorithm includes one-hot encoding to convert text data into numeric data, feature correlation to select only the most correlated variables, and a technique to overcome the missing data. Our approach is an effective way to handle missing data in large datasets with the K-nearest neighbor algorithm based on the most correlated features (KNN–MCF). As far as we are concerned, there has been no previous research that has focused on important features dealing with missing observations. Compared to the typical machine learning prediction algorithms, the prediction accuracy of the proposed method is 92.01% with the random forest algorithm, which is more efficient than the other methods. [ABSTRACT FROM AUTHOR]

The China–Pakistan Economic Corridor (CPEC) is the flagship project of the Belt and Road Initiative. At the end of the CPEC, the Gwadar port on the Arabian Sea is being built quickly, providing an important economical route for the flow of Central Asia's natural resources to the world. Gwadar city is in a rapid urbanization process and will be developed as a modern, world-class port city in the near future. Therefore, monitoring the urbanization process of Gwadar at both high spatial and temporal resolution is vital for its urban planning, city ecosystem management, and the sustainable development of CPEC. The impervious surface percentage (ISP) is an essential quantitative indicator for the assessment of urban development. Through the integration of remote sensing images and ISP estimation models, ISP can be routinely and periodically estimated. However, due to clouds' influence and spatial–temporal resolution trade-offs in sensor design, it is difficult to estimate the ISP with both high spatial resolution and dense temporal frequency from only one satellite sensor. In recent years, China has launched a series of Earth resource satellites, such as the HJ (Huangjing, which means environment in Chinese)-1A/B constellation, showing great application potential for rapid Earth surface mapping. This study employs the Random Forest (RF) method for a long-term and fine-scale ISP estimation and analysis of the city of Gwadar, based on the density in temporal and multi-source Chinese satellite images. In the method, high spatial resolution ISP reference data partially covering Gwadar city was first extracted from the 1–2 meter (m) GF (GaoFen, which means high spatial resolution in Chinese)-1/2 fused images. An RF retrieval model was then built based on the training samples extracted from ISP reference data and multi-temporal 30-m HJ-1A/B satellite images. Lastly, the model was used to generate the 30-m time series ISP from 2009 to 2017 for the whole city area based on the HJ-1A/B images. Results showed that the mean absolute error of the estimated ISP was 6.1–8.1% and that the root mean square error (RMSE) of the estimation results was 12.82–15.03%, indicating the consistently high performance of the model. This study highlights the feasibility and potential of using multi-source Chinese satellite images and an RF model to generate long-term ISP estimations for monitoring the urbanization process of the key node city in the CPEC. [ABSTRACT FROM AUTHOR]

Neighborhoods are vaguely defined, localized regions that share similar characteristics. They are most often defined, delineated and named by the citizens that inhabit them rather than municipal government or commercial agencies. The names of these neighborhoods play an important role as a basis for community and sociodemographic identity, geographic communication and historical context. In this work, we take a data-driven approach to identifying neighborhood names based on the geospatial properties of user-contributed rental listings. Through a random forest ensemble learning model applied to a set of spatial statistics for all n-grams in listing descriptions, we show that neighborhood names can be uniquely identified within urban settings. We train a model based on data from Washington, DC, and test it on listings in Seattle, WA, and Montréal, QC. The results indicate that a model trained on housing data from one city can successfully identify neighborhood names in another. In addition, our approach identifies less common neighborhood names and suggestions of alternative or potentially new names in each city. These findings represent a first step in the process of urban neighborhood identification and delineation. [ABSTRACT FROM AUTHOR]

Up-to-date and reliable land-use information is essential for a variety of applications such as planning or monitoring of the urban environment. This research presents a workflow for mapping urban land use at the street block level, with a focus on residential use, using very-high resolution satellite imagery and derived land-cover maps as input. We develop a processing chain for the automated creation of street block polygons from OpenStreetMap and ancillary data. Spatial metrics and other street block features are computed, followed by feature selection that reduces the initial datasets by more than 80%, providing a parsimonious, discriminative, and redundancy-free set of features. A random forest (RF) classifier is used for the classification of street blocks, which results in accuracies of 84% and 79% for five and six land-use classes, respectively. We exploit the probabilistic output of RF to identify and relabel blocks that have a high degree of uncertainty. Finally, the thematic precision of the residential blocks is refined according to the proportion of the built-up area. The output data and processing chains are made freely available. The proposed framework is able to process large datasets, given that the cities in the case studies, Dakar and Ouagadougou, cover more than 1000 km2 in total, with a spatial resolution of 0.5 m. [ABSTRACT FROM AUTHOR]