Search

The study is done at a paper company in west java by doing evaluation of waste paper supplier of raw materials with the aim of gaining evaluation criteria supplier and ranking supplier. The process of making evaluation criteria supplier is done by using the method hierarchy (AHP) analytical process and ranking with the approach of the supplier technique for order preference by similarity to (TOPSIS) solution of a problem. according data processing by using both the main criterion used this method produced 6, the quality criteria, delivery, the price of, resources, service, and company management and putting quality criteria as the criteria with the weighting for 30,7 % of as much as. While the supplier of ranking. the best supplier PT. CMN and PT. AMN supplier as the worst alternative supplier of 5. Made with a model evaluation criteria and ranking supplier is expected to supplier evaluation process useful for other types of businesses the same paper companies.

A paper-based colorimeter for absorbance and concentration measurement of the food colouring dye is proposed. The paper-based colorimeter system consists of a white LED as light source, paper-based cuvette holder, and smartphone light sensor. The paper-based colorimeter with smartphone light sensor is low-cost, mobile and real-time for the detection of colouring dye concentration. The detection response of the paper-based colorimeter system was found to be linear with the colouring dye concentration in the range from 0 to 0.025 g/mL with a correlation coefficient (R2) 0.89±0.04. The experimental results show that this paper-based colorimeter system is highly sensitive and have a potential application, from student labs to small industries.

This study aims to obtain the best operating conditions including pyrolysis time and amount of catalyst in oil fuel production from reject plastic as raw material with coal fly ash as catalyst based on its yield and characteristics. Both reject plastic and coal fly ash are waste originating from a paper industry in Medan. This research was carried out in three steps: preparation of reject plastic and coal fly ash, oil fuel production and characterization (composition of coal fly ash and density, viscosity and heating value of oil fuel). The main components in the coal fly ash are SiO2, C and Al2O3 that are 30.36%, 27.11% and 24.04% respectively. The yields of oil fuel are in the range of 14.18% - 26.58%. From 12 samples, 10 samples meet the standard density whereas 8 samples meet the standard viscosity for diesel fuel based on ASTM D-975. The best operating condition is achieved when using 15% catalyst with 2 h pyrolysis time that produce oil fuel with the highest heating value.

For the past few years, the generation of the solid waste was increasing which makes the environment pollution. In such solid waste products are reused by waste management process like gasifier. The solid waste products majorly dump into the municipal wastages, the paper cup waste was regular waste from the municipalities in such waste was regular in practice. Recycling of paper cups is not easy because it has a paraffin or polyethylene plastic and also need 150 years to degrade. So far focus on the recycling of paper cup waste, which was treated to the downdraft gasifier when the producer gas formed by means of supplying compressed air to the gasifier, After that the producer gas pass with inlet air into to the combustion chamber. In this project deals the analysis of paper cup waste which characterized by using TGA, CHN analysis and also evaluated the performance of CI engine.

Recent Industry looking for paper battery with highly flexibility, easily handling and high voltage. Currently, battery occupies a large quantity of vicinity and contributes to a big part of device weight. In this paper, we use carbon nanotubes with conventional sheet of cellulose based paper as cathode, aluminum foil as anode and a polyethylene (plastic paper) of 50µm as a separator to obtain adaptability, ultra-thin electricity storage without a loss of integrity and performance. In this attempt folded anode and cathode sheets which resulted increase in voltage and achieved approximately 40% more than other paper batteries. Voltage 3.38V is achieved which is better than the preceding existing paper battery voltage.

Empty fruit bunches (EFB) is one of solid waste from crude palm oil (CPO) mill. It’s about 20-22% from fresh fruit bunches (FFB) or equal to the CPO yield. Indonesian CPO production in 2019 was 51.8 million tons; increased by 9% compared to 2018. So, about 51.8 million tons of EFB was available in 2019. EFB is a potential lignocellulosic material for pulp and paper. The utilization of EFB fibers for papermaking has been studied extensively. The use of EFB for printing and writing papers tends to cause pitch problems and poor visual appearance. The most potential use of EFB fibers is for packaging papers. EFB fiber is classified as short up to moderate fibers, so its usage must still be mixed with other fibers to improve the sheet strength. Many experiments have been done regarding the mixture of EFB fibers with other fibers such as OCC (Old Corrugated Containers) and UBC (Used Beverage Cartons) recycled fibers. Other types of paper from EFB are still being developed, including for nursery bags and active packaging papers.

Methane yield is one of the important factors that indicate the anaerobic digestion (AD) process efficiency. The AD is an available treatment of recycled pulp and paper sludge (RPPS) and recycled pulp and paper wastewater (RPPW). This process protects the environment and produces methane, which is considered as renewable energy. In this study, the anaerobic treatment of the RPPW and RPPS were studied using 1L completely stirred tank reactor (CSTR) at laboratory scale with mesophilic conditions. However, a kinetic study was carried out using four models in order to compare and adjust the experimental results. The experimental results show that the RPPW and RPPS methane productions were between 691 and 945 mL/g based on volatile solid (VS), and the corresponding digestion time was about 26 days for the both experiment. The corresponding digestion time could be understood through the methane production kinetic models by digestion experiments within a short time. Different kinetics models were tested including Richards, Logistic, modified Gompertz and Cone models. The obtained results show the modified Gompertz model as the suitable model since it gives the lowest deviation from experimental results. Therefore, the proposed model could be used to accurately predict behavior of AD processes.

Paper documents provide important records of human civilization and so understanding the causes of paper document aging is very important to delay the process and prolong the lifespan of paper. This study used an anionic rosin as a sizing agent and aluminum sulphate as a fixing agent, to produce paper with different amounts of aluminum sulphate. The effect of different contents of aluminum ions on the acidification and aging of the paper was studied by accelerated aging experiments. The results showed that the presence of aluminum ions in paper could accelerate the acidification and aging process, and the higher the content of aluminum ions, the worse the durability of paper. In the process of accelerated aging, with increasing aluminum ion content, the rate of decline in the strength and whiteness of paper increased whilst the pH value decreased. Accelerated aging under the same conditions for 15 days caused the pH value, whiteness, tensile index and tear index of paper without aluminum ions to decrease by 14.77%, 3.15%, 7.99% and 11.70% respectively. In comparison, paper which had aluminum sulphate added to 30 kg per ton of paper, showed the decreases of pH, whiteness, tensile index and tear index by 22.62%, 4.35%, 24.66% and 31.07% respectively.

Dynamic simulation is increasingly adopted in the preventive conservation of cultural heritage as an advanced method to investigate strategies for mitigating the climate-induced degradation. The conservation of paper collections is strongly interrelated with the relative humidity of the air, as organic-hygroscopic materials act as buffers on relative humidity fluctuations while being vulnerable to moisture-induced damage. In the dynamic simulation of the microclimate within library and archival storage facilities, it is thus fundamental to include the hygrothermal interaction between the building and its hygroscopic content. The hygroscopic behaviour of paper collections can be modelled by hygrothermal tools such as those of the HAM-family (Heat, Air and Moisture), used to simulate simultaneous heat and mass transfers through porous envelope materials. This research aims at investigating the use of the HMWall model coupled with the software IDA ICE (Indoor Climate and Energy) to simulate of the 1-D heat and moisture transfer through a single wall made of paper. A literature survey was carried out to collect the available hygrothermal properties of modern and historical papers. Sensitivity analysis was used to identify the most relevant hygrothermal parameters in the simulation of moisture gradients across the paper wall. Moreover, the number of sub-layers in the paper wall model was found to significantly affect the internal distribution of moisture gradients. The use of the HMWall model was then tested in the simulation of the hygroscopic behaviour of a single paper wall in both steady-state and transient conditions. Finally, a simplified model able to preserve the accuracy of the results was proposed with the purpose of reducing the computation effort that a high-resolution model could involve if implemented in whole buildings. This study represents the first step towards the application of the HMWall model for the simulation of the indoor climate of library repositories.

The pulp and paper sector currently plays important part in the world’s economy. In this paper, we present a review of pulping technologies to convert logs or wood chips and non-woody materials into pulp for use in papermaking which consist of mechanical, chemical and semi-mechanical. It also talks about the history of papermaking and various important factors involved in producing high quality pulp and paper such as H-factor (time and temperature), alkaline charge, liquor to wood ratio, and sulphidity. This paper also discusses about challenges facing by the pulp and paper industry or processes, namely high use of energy and chemicals, as well as generation of liquid and solid wastes of large quantities. This paper will be handier for those who are new to the field of pulping research for paper production.

Paper industry has a big potency of energy that can be reused in its sludge. However, the water content of the sludge is still high and need to be dried. In this study, the characteristics of the sludge at different water content are explored. The sludge is collected from paper industry in Sumatera Utara province of Indonesia mainly at 70% water content. The experiments are carried out at lower water content that is from 10% to 60%. The proximate and ultimate analyses are carried out and the calorific values are discussed. The objective is to explore the potency of the sludge if it is employed as solid fuel. The results show that reducing water content of the sludge affects the characteristics of the sludge. The lower water content increases fixed carbon value, calorific value and volatile matter.

One of the strategies to improve the food shelf - life is to utilize functional packaging. The functional packaging could contain antimicrobial agents to inhibit pathogenic microorganisms or antioxidants to prevent oxidative degradation. Vanillin, known as one of the most common food flavoring ingredients, could serve as a potent antioxidant. This paper focuses on the development of a methodology to determine vanillin content in the coated paper using gas chromatography. The vanillin was extracted from vanillin-coated paper using water as the aqueous phase and dichloromethane (DCM) as the organic phase. The effect of filtration on vanillin extraction and water to DCM ratio used for extraction were investigated. It was concluded that the extraction without filtration with water to DCM ratio of 1:2 was the best setting for the vanillin extraction from vanillin- coated paper.

The cement industry is one of the most polluting industries globally, due to the high amount of CO2 emissions generated during production. Improving the sustainability of cement production is thus vital. Waste paper is also a big problem for many societies, especially in developed countries, where the use of board and paper increases almost every day. This work examines the possibility of using incinerated waste paper ash (IWPA) and non-incinerated waste paper (NIWP) as a partial replacement for cement (by weight) in mortar mixtures. For non-incinerated waste paper, the tested replacement levels were 1%, 1.5%, 2.5% and 3.5%, while for incinerated waste paper, the replacement levels were 2.5%, 5%, 7.5%, and 10%. An additional mix without any replacement was also cast for comparison purposes. The fresh and hardened properties of mortar were assessed using flow rate, compressive strength, direct tensile strength, water absorption, and dry density tests, and two test ages (7 and 28 days) were considered for the compressive and tensile strength tests, though water absorption and density tests were undertaken at 28 days only. The results showed that the presence of waste paper (incinerated or non-incinerated) reduced the flow rate of fresh mortar as compared with the reference mix. It was also found that, for the NIWP mixtures, 1% replacement of cement was the most efficient percentage; this increased the compressive strength by 16% and the direct tensile strength by 19% at 28 days of age. For the IWPA mixes, the results showed that the best replacement ratio was 5%, where the compressive strength and direct tensile strength were improved by 10% and 11% at 28 days, respectively. These 1% NIWP and 5% IWPA mixtures gave similar water absorption of 7% to the reference mix.

Tomato is a fruit that does not last long (perishable), so it is necessary to find another alternative to increase its economic value. One of those alternatives that can be done is by making a fermented product called nata de tomato. Nata de tomato contains microbial cellulose which is formed by the bacteria Acetobacter xylinum. This microbial cellulose has some advantages over the typical cellulose found in common plants. Thus, it potentially could be further developed in the papermaking. This research was conducted to study the effects of combining microbial cellulose pulp from nata de tomato with tomato powder on paper quality, such as water content, grammage and water absorbency. In this research, the tomato filtrate was used as a growth medium for Acetobacter xylinum to produce nata de tomato. Then, nata de tomato was shredded into pulp, while its waste was dried into tomato powder and used as additional material for the pulp. This research was designed using a single factor experiment with variation in the addition of tomato powder by 0, 1, 3 and 5 % (w/w). The effects of this variation observed using variance analysis and significant test using the LSD (Least Significant Difference) method.

India has one of the world's fastest expanding pulp and paper markets. With a growth rate of more than 10% per year in terms of per-capita growth, The pulp and paper industry requires a lot of capital investment, energy, and water. A paper mill produces 40 to 50 kg of dry sludge (70 percent primary sludge and 30 percent secondary sludge) when 1 tonne of paper is produced. Most of this sludge is now disposed of by land spreading and filling, both of which involve high disposal costs. Pulp and paper industry is one of the most polluted industries in the world in general and India in particular. India produces 10.11 million tons paper per annum which is 2.6% of world’s overall production quantity of paper. This study present using paper mill waste as a component in the manufacture of burnt bricks as a possible route to environmentally friendly construction. This research report details the findings of an experimental investigation into the production of eco-friendly, bricks using soil and paper mills. This research exhibits some increased compressive strength in mix of papermill waste.

For the investigation of porous media with applications in the field of civil engineering on concrete and mortar, NMR technology is used, with emphasis on the sensitivity of 1H hydrogen protons to pore filling fluids. NMR technology was used to highlight the changes that replacing cement with recycled paper ash powder in mortar recipes brings at a molecular level. The samples are analyzed during 56 days, at predetermined deadlines depending on the evolution of cement compounds hydration. Ability of recycled paper ash to replace cement in its role as binder is analyzed and the results obtained from mechanical tests are correlated with the structure and volume of pores in the control samples. Mixture compositions and C–S–H characteristics are calculated based on NMR signal intensities and relaxation analysis.

Paper making requires raw materials with high cellulose and hemicellulose content. The alternative materials that can be used in the paper making are sugarcane bagasse and banana midrib. The paper production method used in this study is acetosolve which involves acetic acid as an organic solvent. The objectives of this research are to figure out the acetic acid concentration in delignification process and the ratio between sugarcane bagasse and banana midrib that produce pulp with the highest yield, cellulose and kappa number. In this research, there are some variables, the first is the levels of acetic acid concentration in delignification process, which are 70%, 75%, 80%, 85%, 90%, the second is the ratio between sugarcane bagasse and banana midrib, which are 20:0, 18:2, 16:4, 14:6, 12:8, 10:10. The results show that the best pulping conditions are found to be 80% acetic acid concentration with 12:8 (w/w) ratio between sugarcane bagasse and banana midrib, and also 1:20 (w/v) ratio between raw material and solution of acetic acid at two hours cooking duration. The highest yield of pulp in acetosolve process was 63.1%, and its characteristics are 84.67% of cellulose and 10.44 kappa number.

The goal of the research is to improve the surface states of kraft paper and to make coated kraft paper with wear resistance suitable for packaging material. Based on wear and coating mechanism, the research analyzed and compared the characteristics and microstructure of uncoated paper and coated paper.The result shows that coating can reduce the surface resistance and friction of paper.Kraft paper was coated with the VaporCoatTM2200.s coating in the research. The research studied the influence of coating process on wear resistance of coated kraft paper.Two hundred groups of experimental datum of each sample show that the optimal coating weight is 18g/m2. As expected, coated kraft paper has better wear resistance and other performance than the uncoated kraft paper. The results show that the coating technology is an inexpensive and environmentally friendly process. The research provides the theoretical basis and data supporting for packaging enterprises to produce the coated paper-based packaging materials with wear resistance.

This study addresses the need to improve life on earth by finding a way to reintroduce ubiquitous waste back into the system. On a hand, there is the amount of cellulosic waste that can no longer be reintroduced into the paper recycling process. On the other hand, the amount of cement used globally, is growing alarmingly. My study seeks the balance of a mix of these two materials, which would generate desirable effects both from an engineering and ecological point of view. Paper ash, is a material made of particles of various sizes and can play various roles in the composition of mortars. The efficacy of particles up to 0.025 mm in size (powder ash) as a cement substitute and the efficiency of particles in size between 0.025 and 8 mm (flakes) as a pozzolanic additive are demonstrated. The results of the mechanical tests to which the samples were subjected show the possibility of reducing the amount of cement used in standard recipes by adding ash from recycled paper, without compromising the physical and mechanical properties of the mortars. The cement economy can rise up to 20 percent while the mechanical strength increases by 5-10 percent compared to the basic recipe.

Computational simulation for the fluid flow in a paper based microfluidic system was performed and was experimentally validated in this work. Comsol Multiphysics based simulation was performed and the module used was species transport in porous medium. Two separate simulation for the reagent distribution and the interaction of sample with the immobilized reagent in paper based microfluidics devices were carried out. This was performed by varying the parameters such as adsorption constant, diffusivity and average velocity of fluid in the porous medium for finding the concentration profile. Finer mesh were used for the simulation which gives more accurate results with less computational time. The reagent distribution was experimentally validated by dropping methylorange indicator over Whatman filter paper.

Several essential oils have been evaluated as antibacterial agent in the production of natural paper from banana peel (Musa paradisiaca Linn.), namely cinnamon, clove, lime and lemon oil. The purpose of the research was to examine the antibacterial activity of the papers with additive of those several essential oils againt Staphylococcus aureus and Escherichia coli. Paper preparation was successfully carried out by alkalization method, using 4% NaOH at a temperature of 100 °C for 1 h. The essential oils as antibacterial agent were added with concentration 2.5% to the pulp (1:40). The antibacterial activities were tested using Kirby-Bauer disc diffusion method. All of the paper produced meet the standard of ISO 6519:2016 about Basic Paper for Laminated Plastic Wrapping Paper within the parameter of pH and water content. The result of the research showed that all of the paper with essential oils additive has antibacterial activity againt S. aureus, but only paper with cinnamon oil additive that have antibacterial activity againts E. coli. The use of cinnamon oil gave the largest inhibition zone diameter both on S. aureus and E. coli. Paper with cinnamon oil additive had inhibition zone diameter 18 mm on S. aureus (strong category) and 9 mm on E. coli (medium category).

In this paper, we describe a Microfluidic Paper-based Analytical Devices (μPADs) for the simultaneous quantification of two important biomarkers of kidney function in blood. This paper provides a simple, disposable, portable, and inexpensive colorimetric method for the quantification of Blood Urea Nitrogen (BUN) and serum creatinine (sCRE). BUN detection is based on the Berthelot reaction, in which urea is converted to ammonium by the use of urease, ammonium ion which then reacts with a mixture of salicylate, sodium nitroprusside, and hypochlorite to yield a blue-green chromophore. sCRE detection is based on the Jaffe reaction, in which sCRE under alkaline conditions react with picrate ions forming an orange complex. The intensity of the color formed is proportional to the BUN & sCRE concentration in the sample. Various experimental parameters were optimized to achieve the best performance of the μPADs. There were no significant differences between the results obtained using the μPADs and a comparative method.

The determination of the antioxidant activity in green tea using FRAP essays developed in a Microfluidic Paper-Based Analytical Device (μPADs) was observed. μPAD was prepared on the chromatographic paper with a suitable pattern and then printed using a solid ink printer. The solid printing was intended to obtain a hydrophobic barrier and a hydrophilic channel on the chromatographic paper. A preliminary study was done to determine the optimum time and temperature used on the penetration of obtaining the hydrophobic barrier to avoid leakage in the channel. Optimization of temperature and time was calculated by the average velocity, the optimum condition was obtained at 120 °C for 90 seconds with an average speed of 0.1 mm.s−1. The green tea samples were prepared by extracting its active compound using demineralized water at 25 °C and 90 °C with 2 hours of immersion time. For the measurement of antioxidant activities, the analysis was carried out by placing 0.5 μl in the detection zone and 5 μl samples into the sample zone μPAD. Then, the color reaction product, which propagates from the sample zone to the detection zone, is processed by Image J software to measure color intensity in CMYK mode. Extracts of green tea samples at 25 °C and 90 °C has a significant difference in antioxidant activity. These results indicate that the method developed in this work can be used as an alternative method for analyzing antioxidant activity in green tea extract. The results of the average amount of antioxidant activity in green tea samples were shown with Fe2+ concentration. High-speed detection, low cost, high accuracy, and ease of use can be attributed to the advantages of our μPAD method.

Microfluidic Paper-based Analytical Devices (μPADs) are a simple analytical platform that satisfy combination of low cost, portability, and ease-to-use with selectivity, sensitivity, and accuracy. In this experiment, the μPADs devices are prepared using a chromatographic paper and designed at appropriate pattern prior to printing by mean of a solid ink (wax) printer to produce hydrophobic barriers and hydrophilic channels. Then, the μPADs are heated at 120°C for 3 min to allow a wax penetrates in the both side of a paper. The resulted μPADs are used for the detection of benzoic acid through alkalimetry principle. For this purpose, the devices are implanted with 5M NaOH in the detection zone and a 2% phenolphthalein indicator in the sample zone before dried in open air. When the devices have dried, the μPADs are ready to be used to detect benzoic acid. To avoid color interferences, the samples are distilled before introduced to the sample zone for quantitative detection. The result soft the color changes can be immediately seen by naked eye, and their intensities are quantified by the Image J software. Excellent linearity is achieved in the range of benzoic acid concentration of 20-120 ppm with the linear equation of Y = 0.0102 x + 0.0077 and the correlation coefficient (R2) of 0.9999. The optimized μPADs devices are successfully applied to the quantitative analysis of benzoic acid in the 5 kinds of commercially packaged beverages. There is no significantly different of the analytical results obtained by the µPADs in comparison to the spectrophotometric method. Overall, the results obtained in this study indicate that the μPADs devices are a reliable tool for high throughout and on-site determination of benzoic acid content in commercial drinks.

Microfluidic paper-based analytical device has been fabricated and subsequently applied to determine the Vitamin C level of the non-seasonal fruit i.e pineapples, oranges, guavas, and apples in Indonesia. µPAD was prepared by creating a hydrophobic barrier on Whatman Chromatography paper No. 1 in a certain pattern printed using Xerox Colorcube 8580 DN-2. 0.05 µl of 2,6-Dichlorophenolindophenol was dispersed into a detection area on the µPAD devices prior to the addition of 0.2 µl of fruits juice samples. The barrier allowed the fruits juice to flow and alter the color of the reagents through a redox reaction. Vitamin C in fruit juice altered the color of 2.6-Dichlorophenolindophenol reagent into a pinkish color. The changing of the reagent color was then processed using Image J software to determine the RGB intensity level. The results showed that the average amounts of Vitamin C in pineapples, oranges, guavas, and apples are 0.05%, 0.05%, 0.08%, and 0.04% respectively.

This work describes comparation two designs of a microfluidic paper-based analytical devices (µPADs) using a wax printing for fabrication of hydrophobic zones on the chromatographic paper and their application to the detection of lead in waste samples. Two different designs used in this research were distance-based method and analysis image method. Sodium rhodizonate in tartrate buffer solution (pH 2.8) solution are used as the colorimetric reagents for the direct naked eyed detection of lead(II) on µPADs. The detection of lead(II) concentration is conducted by measuring the distanceof a colored reaction product which propagate in the detection zone (design 1) and the change in color intensity on the µPADs is also used for the lead detection using ImageJ software to determine the RGB value (design 2). Related to both methods can be used to determine the concentration of lead(II) with a comparable coefficient of determination, but based on the analysis method, design one is a design that is very simple, easy, fast, inexpensive and only uses the naked eye for detection.

FMEA is a widely selected tool for the application of machinery breakdown prevention. This research adopted FMEA technique to reduce and prevent the breakdown of the important equipment of a large commercial paper machine that has capacity of 200,000 tonnes per annum located in the Northeast area of Thailand. This research accomplished the improvement of preventive maintenance in other machines for rapid implementation and improved machine inspections. After implementation, the downtime of paper machine belonging to maintenance department responsibility reduced significantly 5 hours per month by average, machine availability, OEE, and MTBF increased 0.46%, 0.51%, and 10 hours respectively. The machine downtime has been on the downward trend.

The Tea packaging paper sack process at PT. Perkebunan Nusantara VIII is done manually using human labor to lift paper sack weighing 40-60 kg. This condition makes it harder for the labor and increases the risk of Musculoskeletal Disorders (MSDs). In the existing condition, the RULA score is seven which have high risk of work accidents. To minimize the risk of MSDs, a proposed work tool is designed using the Ergonomic Function Deployment approach to produce ergonomic tools. The proposed work tool was developed with the ESHCE principle (Effective, Safe, Healthy, Comfortable, and Efficient) which became a variable in meeting the Ergonomic Function Deployment (EFD) approach. The research results showed that the proposed work tools could help workers in carrying out packaging activities with the decrease in the RULA value on the labor’s posture and could reduce processing time because it united all activities in the packaging area. So it can be concluded that the proposed work tools can reduce the risk of MSDs and can help workers to process the packaging of tea with minimum time.

Issues related to the performance and processing remain a challenge when managing materials from renewable and natural resources. This study aims to show the potential of biopolymer film composite from cassava starch and carboxymethylcellulose to replace the synthetic coating and the area of studies are its barrier, mechanical and chemical properties. Fourier Transform Infrared analysis identified that only film containing CMC could act as antimicrobial agent carrier. The biopolymer film coated on the kraft paper with the presence of 30% v/v glycerol and 10% w/w CMC had the highest tensile strength, at 15 MPa. The film-coated paper also exhibited a hydrophobic surface with reduction of the contact angle from 104.95° to 96.33° for 120 seconds. Meanwhile, addition of turmeric oil into developed BF 3 showed insignificant changes in tensile strength but reduced the contact angle to less than 90°. Thus, the formulated coating materials can be used as an alternative green technology for paper coating used in food industry and can be classified as a form of active packaging.