Search

Active pipe-embedded building envelope is a new kind of pipe-embedded building external wall/roofs. Usually, pipes are embedded in the wall slab or roof slab to allow water circulating in these pipes for heat transfer. Low-grade energy sources can be used for this structure since the enlarged heat transfer surface between the slab mass and water in the pipe allowing for substantial heat flow for relatively small temperature difference. This structure may reduce building cooling/heating load and improve indoor thermal comfort by intercepting the heat/coolth from the ambient air to indoor space. This paper presents a semi-dynamic model of this structure for thermal performance evaluation for system design or indoor environment control etc. This semi-dynamic model is a coupled model. The first part is a simplified dynamic RC model (i.e., resistance and capacitance model). The heat transfer along the width of this structure can be predicted easily by the RC model. The second part is a classical NTU model for evaluating the heat transfer along the pipe and total heat transfer on both surfaces of this structure. A CFD model is developed to act as a virtual experimental test rig to simulate the thermal characteristics of this structure. The simulated results are used to validate this semi-dynamic model and its performance prediction. [ABSTRACT FROM AUTHOR]

The energy efficiency of traditional PCM wall is low in summer since the PCM storing heat in the daytime will become a secondary heat-source and release the heat into the room again at night. In this paper, a novel pipe-encapsulated PCM wall system for self-activated heat removal is proposed. It integrates PCM, nocturnal radiation cooling and gravity heat-pipe technology, and can realize automatic heat insulation and self-activated removal for buildings. Three simplified models for pipe-encapsulated PCM are developed to predict its thermal characteristics. Model Parameters are determined and identified by using genetic algorithm. The pipe-encapsulated PCM is prepared by RT28 and expanded graphite. An experiment setup is established for model validation. Results shows that the 4R2C PCM model are preferable since the identified parameters are relatively less and the accuracy is also acceptable. Furthermore, a simple application about pipe-encapsulated PCM wall is proposed based on the coupled wall model with 4R2C PCM model. Compared with conventional wall, the internal surface accumulated heat transfer of the pipe-encapsulated PCM wall with night active heat removal in 7 days can be reduced by 74.5% in hot climate. It shows great application potential for energy-saving in buildings. [ABSTRACT FROM AUTHOR]

Abstract: Short time step heat flow calculation of building constructions is often needed for practical applications. Conventional methods such as state-space method and root-finding method may produce unstable conduction transfer function (CTF) coefficients at short time steps, and thus result in unstable heat flow calculation through building constructions. Frequency-domain regression (FDR) method is a newly developed method for computing CTF coefficients efficiently by representing the real building construction system with equivalent polynomial s-transfer functions. Previous studies on this method mainly addressed CTF coefficients at the conventional time step of 3600s and the performance of heat flow calculation using these coefficients. This paper presents the investigation on the performance of CTF coefficients at various short time steps based on FDR method, and the performance of the heat flow calculation using these coefficients. The results show that FDR method can produce stable CTF coefficients at various time steps for most building constructions, and the calculated heat flows using these coefficients are of high accuracy. [Copyright &y& Elsevier]

Active pipe-embedded building envelope can allow for substantial heat flow for relatively small temperature difference due to the embedded pipes in the external wall/roof. This structure can directly utilize the low-grade sources for reducing building cooling/heating load and improving indoor thermal comfort by intercepting the heat gain/loss through the building envelope due to the circular water inside the embedded pipe. This paper presents the experimental validation of a semi-dynamic simplified model of the active pipe embedded building envelope. The experiment test rig consists of two environment chambers with one for simulating the ambient environment and one for indoor environment with a pipe-embedded building envelope sample separating both chambers. A small chiller and a buffer tank are installed to provide stable water temperature for the test sample. The temperatures and heat fluxes on both sides of the test sample, the inlet and outlet water temperature as well as flow rate are measured. The measured boundary conditions are used as the inputs of the semi-dynamic simplified model for calculating the thermal performance of the active structure. The results show the semi-dynamic simplified model can predict the semi-steady or pure dynamic thermal performance of the pipe-embedded building envelope very well by comparing with the measurement. [ABSTRACT FROM AUTHOR]