Search

• A Zn-containing alloy with improved crack tolerance and strength is exploited. • Trace Zn promotes pyramidal slips, inhibits twinning, and enhances GB cohesion. • Zn segregation enables crack buffering with a stepped interfacial transition zone. • In-situ TEM proves the emission of 〈 c + a 〉 dislocations despite microcracking. • Higher strength is mainly due to enhanced solid-solution strengthening. Effects of solute segregation at grain boundaries (GBs) on the deformation mechanism and fracture behavior remain obscure for magnesium (Mg) alloys. Here, by introducing Zn segregation at GBs, we obtained an Mg-0.5Al-0.4Mn-0.2Ce-0.4Zn (wt.%) alloy achieving fracture elongation (FEL) of ∼33.6 %, with a remarkable FEL improvement by 100 % in comparison to Zn-free counterpart. Meanwhile, the tensile yield strength (TYS, 195.5 MPa) is increased by ∼27.5 MPa after trace Zn addition. Although trace Zn addition improves the fraction of GBs with high misorientation, it reconciles crack tolerance with enhanced strength. The introduction of Zn not only promotes pyramidal 〈 c + a 〉 slips and inhibits twinning nucleation, but also enhances the GB cohesion by Zn segregation. Based on in-situ microstructure observation, we found that the enhanced GB cohesion enables the segregation-inspired hierarchical crack buffering, as well as deflecting and branching. Enhanced GBs can also facilitate the continuous emission of 〈 c + a 〉 dislocations in neighboring grains irrespective of the onset of microcracks, forming a plastic zone to retard local strain concentration, thus avoiding microcrack percolation and attaining a crack-mediated elongation reserve of above 15 %. Besides, the higher TYS in the Zn-containing alloy mainly stems from the enhanced solid-solution strengthening of Zn solutes, thus achieving strength and crack tolerance synergy. [Display omitted] [ABSTRACT FROM AUTHOR]

• The superplastic elongation of ∼450% is achieved in low-alloyed Mg system by utilizing co-segregation of Zn, Ca, Zr and Ag atoms along the grain boundaries. • Superplastic deformation of low-alloyed Mg system can be enhanced by stress-driven grain boundary migration mechanism. • Based on disclination-dislocation reactions, a new grain boundary migration model has been proposed. • The grain boundary migration model can be used to understand the cooperative deformation mechanisms of dislocation slip and grain boundary migration. Superplastic forming, as an advanced manufacturing method, is especially important for producing complex-shaped components for Mg-alloys. Superplasticity can be achieved through grain boundary sliding at elevated temperatures in high-alloyed Mg systems, with a typical grain size < 10 μm stabilized by high densities of intermetallic precipitates. However, it is difficult to stabilize small grains and facilitate grain boundary sliding in low-alloyed systems due to insufficient precipitates. Here, by utilizing a distinctive design strategy, i.e. introducing solute segregation to enhance stability of the fine-grained structure, we obtained an Mg-1Zn-0.2Ca-0.2Zr-0.1Ag (wt.%) alloy achieving ∼450% superplastic strain. Through quasi-in-situ Electron Backscatter Diffraction analyses, we investigated systematically microstructure evolutions during superplastic deformation of the alloy at different strains. It has been found that superplasticity is achieved through the absorption of intragranular dislocations by grain boundaries, which are associated with stress-driven grain boundary migration mediated by disclination-dislocation reactions. By using a theoretical description based on stress-driven grain boundary migration and disclination-dislocation reactions, our model can capture multiple superplasticity mechanisms (e.g., grain boundary sliding and grain rotation), which establishes a fundamental relationship between the evolution of microstructural defects and the strain accommodation during superplastic deformation. Our results not only suggest an effective way to achieve superplasticity in low-alloyed Mg systems, but also provide a new insight to elucidate the nature of superplasticity mechanism by revealing the intrinsic correlation between stress-induced grain boundary migration and disclination/dislocation motion. [Display omitted] [ABSTRACT FROM AUTHOR]