Search

[Display omitted] Over the past decade, continuous manufacturing has garnered significant attention in the pharmaceutical industry. Still, numerous continuous unit operations need developments, such as powder blending and feeding at low and high throughputs. Especially the continuous and consistent feeding of solid drug substances and excipients at low feed rates remains challenging. This study demonstrates a micro-feeder capable of feeding poorly-flowing pharmaceutical powders at low feed rates. The system performance was investigated using three grades of pharmaceutical powder: croscarmellose sodium (cohesive), magnesium stearate (very cohesive), and an active ingredient, paracetamol (non-flowing). The results show that the micro-feeder can continuously and consistently feed powders at low flow rates (<20 g/h) with low variability (<10 % for non-flowing materials and < 5 % for cohesive materials). Notably, the micro-feeder achieves these results without any feedback control and remains unaffected by refilling, making it a truly versatile and industry-relevant solution. The study's results demonstrate that this micro-feeder system effectively tackles the challenge of consistent and accurate powder feeding at low rates. [ABSTRACT FROM AUTHOR]

Rifampicin (RIF) is commonly used in the treatment of tuberculosis (TB), a bacterium that currently infects one fourth of the world's population. Despite the effectiveness of RIF in treating TB, current RIF treatment regimens require frequent and prolonged dosing, leading to decreased patient compliance and, ultimately, increased mortality rates. This project aims to provide an alternative to oral RIF by means of an inhalable spray-dried formulation. TB uses alveolar macrophages to hide and replicate until the cells rupture, further spreading the bacteria. Therefore, delivering RIF directly to the lungs can increase the drug concentration at the site of infection while reducing off-site side effects. Cyclodextrin (CD) was used to create a RIF-CD inclusion complex to increase RIF solubility and biodegradable RIF-loaded NP (RIF NP) were developed to provide sustained release of RIF. RIF NP and RIF-CD inclusion complex were spray dried to form a dry powder nanocomposite microparticles (nCmP) formulation (RIF-CD nCmP). RIF-CD nCmP displayed appropriate aerosol dispersion characteristics for effective deposition in the alveolar region of the lungs (4.0 µm) with a fine particle fraction of 89 %. The nCmP provided both a burst release of RIF due to the RIF-CD complex and pH-sensitive release of RIF due to the RIF NP incorporated into the formulation. RIF-CD nCmP did not adversely affect lung epithelial cell viability and RIF NP were able to effectively redisperse from the nCmP after spray drying. These results suggest that RIF-CD nCmP can successfully deliver RIF to the site of TB infection while providing both immediate and sustained release of RIF. Overall, the RIF-CD nCmP formulation has the potential to improve the efficacy for the treatment of TB., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Segregation refers to the separation of components in a powder mixture, resulting in potential issues related to concentration inhomogeneity. Any well-mixed blend that undergoes secondary processing is inherently susceptible to segregation which, if unmitigated, will lead to active compound concentration variance and poorer product quality. The consequences range from adverse financial impact to manufacturers with product failures to the detrimental health effects to product users. Hence, the topic of segregation is of paramount importance to the industry, requiring it to be dissected and scrutinized intensively by scientists worldwide. This review provides a well-crafted theoretical framework designed to understand the common segregation mechanisms that manufacturing facilities face, followed by the efforts to gauge the degree of segregation. To minimize segregation in blends, various approaches - mathematical modeling, empirical experiments, and empirical methods with modeling consideration - have been utilized in segregation research and are covered in this review. The past segregation studies from many fields are discussed, with particular emphasis on pharmaceuticals. The review also discusses the evolution and advances in mixing technology and storage systems implemented by the pharmaceutical industry to prevent segregation. In the conclusion, the authors articulated their perspectives on potential mitigation measures, including suggestions for improvements and future studies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Hyperlipidemia and its associated cardiovascular complications are the major causes of mortality and disability worldwide. Simvastatin (SIM) is one of the most commonly prescribed lipid-lowering drugs for the treatment of hyperlipidemia by competitive inhibition of 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase. However, the extensive first-pass metabolism leading to low oral bioavailability and frequent daily doses may lead to poor patient compliance and adverse effects caused by plasma fluctuations. To overcome these challenges, this work purposed two microneedle (MN) delivery strategies for the potential enhancement of SIM delivery. Firstly, nanocrystal (NC) formulations of SIM were investigated, followed by incorporation into a trilayer dissolving microneedle (DMN) design. Furthermore, a novel effervescent powder-carrying MN (EMN) design was developed to enhance intradermal delivery by incorporating the effervescent agents into the drug powder. Both MN approaches exhibited significantly improved permeation and in-skin deposition ability in the Franz cell study, with the ex vivo delivery efficiency of 64.33 ± 6.17 % and 40.11 ± 4.53 % for EMNs and DMNs, respectively. Most importantly, in vivo studies using a female Sprague-Dawley rat model confirmed the successful delivery of SIM from NCs-loaded DMNs (C max  = 287.39 ± 106.82 ng/mL) and EMNs (C max  = 203.05 ± 17.07 ng/mL) and maintain therapeutically relevant plasma concentrations for 15 days following a single application. The enhanced bioavailabilities of DMNs and EMNs were 24.28 % and 103.82 %, respectively, which were both significantly higher than that of conventional oral administration., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

A powder formulation for mucosal administration of mRNA-encapsulated lipid nanoparticles (mRNA-LNPs) is expected to be useful for respiratory diseases. Although freeze-drying is widely used to obtain solid formulations of mRNA-LNPs, highly hydrosoluble cryoprotectants, such as sucrose are necessary. However, sucrose is not a suitable excipient for inhalation powders because of its hygroscopic and deliquescence properties. Spray freeze-drying (SFD) is a method to produce inhalable powder formulation. In this study, we prepared inhalable powder formulations of mRNA-LNPs without deliquescence excipients using pH-modified SFD, which strengthens the interaction between mRNA and ionizable lipids of LNPs by acidic pH modifier, leading to retention of the encapsulated structure of mRNA-LNPs even after SFD. Powdered mRNA-LNPs were suitable for inhalation, and mRNA was encapsulated in LNPs after SFD. The mRNA encapsulation efficiency and mRNA transfection efficiency of pH-modified SFD-mediated powdered mRNA-LNPs were higher than those of conventional SFD, although they were significantly lower than those of liquid intact mRNA-LNPs. However, after long-term storage, the powdered formulation of the mRNA-LNPs exhibited higher mRNA transfection efficiency than liquid mRNA-LNP. Powdered mRNA-LNPs also exerted their function in air-liquid interface cultivation and in vivo intratracheal administration. Collectively, the powder formulation of mRNA-LNPs especially prepared by SFD is expected to be applied for dry powder inhalers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Multidrug-resistant tuberculosis (MDR-TB) and extensively drug-resistant tuberculosis (XDR-TB) continue as public health concerns. Inhaled drug therapy for TB has substantial benefits in combating the causal agent of TB (Mycobacterium tuberculosis). Pretomanid is a promising candidate in an optional combined regimen for XDR-TB. Pretomanid has demonstrated high potency against M. tuberculosis in both the active and latent phases. Conventional spray drying was used to formulate pretomanid as dry powder inhalers (DPIs) for deep lung delivery using a proliposomal system with a trehalose coarse excipient to enhance the drug solubility. Co-spray drying with L-leucine protected hygroscopic trehalose in formulations and improved powder aerosolization. Higher amounts of L-leucine (40-50 % w/w) resulted in the formation of mesoporous particles with high percentages of drug content and entrapment efficiency. The aerosolized powders demonstrated both geometric and median aerodynamic diameters < 5 µm with > 90 % emitted dose and > 50 % fine particle fraction. Upon reconstitution in simulated physiological fluid, the proliposomes completely converted to liposomes, exhibiting suitable particle sizes (130-300 nm) with stable colloids and improving drug solubility, leading to higher drug dissolution compared to the drug alone. Inhalable pretomanid showed higher antimycobacterial activity than pretomanid alone. The formulations were safe for all broncho-epithelial cell lines and alveolar macrophages, thus indicating their potential suitability for DPIs targeting pulmonary TB., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Extracellular vesicles (EVs) have emerged as a promising drug delivery system. Connectosomes are a specialized type of EVs that contain connexins in their membranes. Connexin is a surface transmembrane protein that forms connexin hemichannels. When a connexin hemichannel on a connectosome docks with another connexin hemichannel of a target cell, they form a gap junction that allows direct intracellular delivery of therapeutic cargos from within the connectosome to the cytoplasm of the recipient cell. In the present study, we tested the feasibility of converting connectosomes into dry powders by (thin-film) freeze-drying to enable their potential storage in temperatures higher than the recommended -80 °C, while maintaining their activity. Connectosomes were isolated from a genetically engineered HeLa cell line that overexpressing connexin-43 subunit protein tagged with red fluorescence protein. To facilitate the testing of the function of the connectosomes, they were loaded with calcein green dye. Calcein green-loaded connectosomes were thin-film freeze-dried with trehalose alone or trehalose and a polyvinylpyrrolidone polymer as lyoprotectant(s) to produce amorphous powders with high glass transition temperatures (>100 °C). Thin-film freeze-drying did not significantly change the morphology and structure of the connectosomes, nor their particle size distribution. Based on data from confocal microscopy, flow cytometry, and fluorescence spectrometry, the connexin hemichannels in the connectosomes reconstituted from the thin-film freeze-dried powder remained functional, allowing the passage of calcein green through the hemichannels and the release of the calcein green from the connectosomes when the channels were opened by chelating calcium in the reconstituted medium. The function of connectosomes was assessed after one month storage at different temperatures. The connexin hemichannels in connectosomes in liquid lost their function when stored at -19.5 ± 2.2 °C or 6.0 ± 0.5 °C for a month, while those in dry powder form remained functional under the same storage conditions. Finally, using doxorubicin-loaded connectosomes, we showed that the connectosomes reconstituted from thin-film freeze-dried powder remained pharmacologically active. These findings demonstrate that (thin-film) freeze-drying represents a viable method to prepare stable and functional powders of EVs that contain connexins in their membranes., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [ROW and ZC report financial support provided by TFF Pharmaceuticals, Inc. ZC reports a relationship with TFF Pharmaceuticals, Inc., that includes equity or stocks and funding. ROW reports a relationship with TFF Pharmaceuticals, Inc., that includes consulting or advisory, equity or stocks, and funding. Conflict of interest management plans are available at UT Austin]. ZC serves as the Editor of the International Journal of Pharmaceutics for North America. This paper was subject to all the Journal’s usual procedures. The peer review was handled, and the editorial decision was made independently of ZC and his research group., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study systematically evaluated the predictive accuracy of common empirical models for pharmaceutical powder compaction. A dataset of nine placebo and twelve active pharmaceutical ingredient (API) loaded blend formulations (four APIs at three drug loadings) was fitted to the widely used empirical tablet compression (Gurnham, Heckel, and Kawakita) and compaction (Ryshkewitch-Duckworth and Leuenberger) models. At low API loadings (<20w/w%), all models achieved R 2 above 90 % and RRMSE (relative root mean squared error) below 0.1. However, as API loads increased, overall model performance decreased, notably in the Heckel model. A parameter variability analysis identified multiple parameter pairs achieving acceptable fits. Consequently, a novel global optimization approach was developed populating arithmetic, geometric, and harmonic mixture rules for empirical tuning parameters. This method outperformed the traditional line of best fit approach. A cross validation study revealed that this method is capable of predicting tuning parameters which achieve an acceptable Goodness of Fit for new blends. Finally, with the restriction of maintaining consistent parameters for the placebo blend, the proposed method could substantially reduce the experimental requirements and API consumption for the exploration of new blends., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Daniel Markl reports financial support was provided by GlaxoSmithKline Research & Development Limited. Daniel Markl reports financial support was provided by Scottish Funding Council. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.]., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Monoclonal antibodies (mAbs) represent a promising modality for the prevention and treatment of viral infections. For infections that initiate from the respiratory tract, direct administration of specific neutralizing mAbs into lungs has advantages over systemic injection of the same mAbs. Herein, using AUG-3387, a human-derived mAb with high affinity to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its various variants, as a model mAb, we formulated the mAb into dry powders by thin-film freeze-drying, confirmed that the AUG-3387 mAb reconstituted from the dry powders retained their integrity, high affinity to the SARS-CoV-2 spike protein receptor binding domain (RBD), as well as ability to neutralize RBD-expressing pseudoviruses. Finally, we showed that one of the AUG-3387 mAb dry powders had desirable aerosol properties for pulmonary delivery into the lung. We concluded that thin-film freeze-drying represents a viable method to prepare inhalable powders of virus-neutralizing mAbs for pulmonary delivery into the lung., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Cui reports a relationship with TFF Pharmaceuticals, Inc. that includes: equity or stocks and funding grants. Williams reports a relationship with TFF Pharmaceuticals, Inc. that includes: consulting or advisory, equity or stocks, and funding grants. Xu and Moon report a relationship with TFF Pharmaceuticals, Inc. that includes: consulting or advisory. Cui, Williams, Christensen, Emig, Mena, Vitug and Henry are inventors on IP related to this work. Christensen was a consultant for TFF Pharmaceuticals. Emig, Mena, Vitug, Henry, and Ventura are or were employees of Augmenta Bioworks, Inc. ZC serves as the Editor of the International Journal of Pharmaceutics for North America. This paper was subject to all the Journal’s usual procedures. The peer review was handled, and the editorial decision was made independently of ZC and his research group., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Pulmonary delivery of antibiotics is an effective strategy in treating bacterial lung infection for cystic fibrosis patients, by achieving high local drug concentrations and reducing overall systemic exposure compared to systemic administration. However, the inherent anatomical lung defense mechanisms, formulation characteristics, and drug-device combination determine the treatment efficacy of the aerosol delivery approach. In this study, we prepared a new tobramycin (Tobi) dry powder aerosol using excipient enhanced growth (EEG) technology and evaluated the in vitro and in vivo aerosol performance. We further established a Pseudomonas aeruginosa-induced lung infection rat model using an in-house designed novel liquid aerosolizer device. Notably, novel liquid aerosolizer yields comparable lung infection profiles despite administering 3-times lower P. aeruginosa CFU per rat in comparison to the conventional intratracheal administration. Dry powder insufflator (e.g. Penn-Century DP-4) to administer small powder masses to experimental animals is no longer commercially available. To address this gap, we developed a novel rat air-jet dry powder insufflator (Rat AJ DPI) that can emit 68-70 % of the loaded mass for 2 mg and 5 mg of Tobi-EEG powder formulations, achieving a high rat lung deposition efficiency of 79 % and 86 %, respectively. Rat AJ DPI can achieve homogenous distribution of Tobi EEG powder formulations at both loaded mass (2 mg and 5 mg) over all five lung lobes in rats. We then demonstrated that Tobi EEG formulation delivered by Rat AJ DPI can significantly decrease CFU counts in both trachea and lung lobes at 2 mg (p < 0.05) and 5 mg (p < 0.001) loaded mass compared to the untreated P. aeruginosa-infected group. Tobi EEG powder formulation delivered by the novel Rat AJ DPI showed excellent efficiencies in substantially reducing the P. aeruginosa-induced lung infection in rats., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Michael Hindle, Worth Longest has patent EXCIPIENT ENHANCED GROWTH (EEG) OF NANOPARTICLE AEROSOLSTO ENABLE IMPROVED PULMONARY TARTETING AND RETENTION issued to Quench Medical. Michael Hindle, Worth Longest has patent DRY POWDER INHALER (DPI) DESIGN FOR PRODUCING AEROSOLS WITHHIGH FINE PARTICLE FRACTIONS issued to Quench Medical. Michael Hindle, Worth Longest, Dale Farkas has patent Dry powder inhalers and interfaces for improved aerosol delivery to children pending to Virginia Commonwealth University. Michael Hindle, Worth Longest, Dale Farkas has patent Devices, systems, and methods for dry powder therapies pending to Virginia Commonwealth University. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Die filling is a crucial step in the pharmaceutical tablet manufacturing process. For industrial-scale production using rotary presses, suction filling is typically employed due to its significant efficiency advantages over gravity filling. Despite its widespread use, our understanding of the suction filling process remains limited. Specifically, there is insufficient comprehension of how filling performance is influenced by factors such as suction velocity, filling velocity, and the properties of the powder materials. Building on our previous research, this study aims to further investigate the effects of powder properties and process parameters (e.g., filling velocity, suction velocity, fill depth) on suction filling behaviour. A systematic experimental investigation was conducted using a model suction filling system, considering both cohesive and free-flowing pharmaceutical powders. The effect of fill depth on suction filling of these powders was examined at different filling and suction velocities. The results demonstrate that two distinctive flow regimes for suction filling can be identified: slow filling and fast filling. These regimes are delineated by a critical filling-to-suction velocity ratio. In the slow filling regime, the filling-to-suction velocity ratio is lower than the critical ratio, meaning that the filling phase is slower than the suction phase. Conversely, the fast filling regime occurs when the filling-to-suction velocity ratio exceeds the critical ratio, implying that the filling phase is faster than the suction phase. This study reveals, for the first time, that when the powder flow pattern during suction filling is dominated by plug flow, full die fill (i.e., the fill ratio equals unity) is achieved in the slow filling regime. However, in the fast filling regime, incomplete die fill is obtained. It is also found that when plug flow prevails during fast filling, the fill ratio has an inverse correlation with the filling-to-suction velocity ratio. This study further reveals that when the plug flow assumption is valid, the filling ratio at various fill-to-suction velocity ratios can be well predicted mathematically. Furthermore, it is also found that once the powder flow pattern differs from the ideal plug flow, which could be induced by the filling conditions and powder cohesion, the fill ratio can be overpredicted., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

[Display omitted] Powder flow is one of the crucial factors affecting several pharmaceutical manufacturing processes. Problems due to insufficient powder flow reduce production process efficiency and cause suboptimum product quality. The U.S. Pharmacopoeia has specified four methods to evaluate the flowability of pharmaceutical powders, including angle of repose (AoR), compressibility index (CI) and Hausner ratio (HR), Flow through an orifice, and shear cell. Comparison within and between those methods with 21 powders (covering a wide range of flowability) was performed in this study. Strong correlation was observed between fixed base cone AoR, and fixed height cone AoR (R2 = 0.939). CI and HR values calculated from a tapped density tester (meeting USP standards), manual tapping, and Geopyc® correlated strongly (R2 > 0.9). AoR, CI/HR, minimum diameter for flowing through an orifice (d min), and shear cell results generally correlate strongly for materials with flowability worse than Avicel® PH102. Both shear cell and CI/HR methods can reliably distinguish powders exhibiting poor flow. For materials with good flow, the ability to distinguish powders follows the order of AoR ≈ CI/HR > shear cell > d min. The systematic comparison of the four common methods provides useful information to guide the selection of methods for future powder flow characterization. Given the limitations observed in all four methods, we recommend that multiple techniques should be used, when possible, to more holistically characterize the flowability of a wide range of powders. [ABSTRACT FROM AUTHOR]

[Display omitted] Medicines remain ineffective for over 50% of patients due to conventional mass production methods with fixed drug dosages. Three-dimensional (3D) printing, specifically selective laser sintering (SLS), offers a potential solution to this challenge, allowing the manufacturing of small, personalized batches of medication. Despite its simplicity and suitability for upscaling to large-scale production, SLS was not designed for pharmaceutical manufacturing and necessitates a time-consuming, trial-and-error adaptation process. In response, this study introduces a deep learning model trained on a variety of features to identify the best feature set to represent drugs and polymeric materials for the prediction of the printability of drug-loaded formulations using SLS. The proposed model demonstrates success by achieving 90% accuracy in predicting printability. Furthermore, explainability analysis unveils materials that facilitate SLS printability, offering invaluable insights for scientists to optimize SLS formulations, which can be expanded to other disciplines. This represents the first study in the field to develop an interpretable, uncertainty-optimized deep learning model for predicting the printability of drug-loaded formulations. This paves the way for accelerating formulation development, propelling us into a future of personalized medicine with unprecedented manufacturing precision. [ABSTRACT FROM AUTHOR]

When tablets are manufactured on a rotary tablet press and the throughput is increased, it leads to changes in powder dynamics during die filling due to formulation characteristics and changing powder flow in the feed frame. This may result, a.o. in increased tablet weight variability, poorer content uniformity, capping and lamination. This research focuses on explaining the die filling performance depending on material properties and process settings, including throughput for small and large tablets. It was concluded that throughput had a negative impact on die filling variability, which is related to reduced residence time and lower fill fraction of the feed frame and dies. Furthermore, the die filling mechanism was inherently different for large tablets in comparison to small tablets. Higher die filling consistency was observed for dense, less porous, less compressible and better flowing powders. As a result of this work, a model was developed to predict the impact of formulation properties and process settings on die filling variability and its dependency on changes in throughput. This model will benefit formulation development at an early stage when active ingredient availability may be challenging as it will avoid the need to conduct experiments at high throughputs. [ABSTRACT FROM AUTHOR]

[Display omitted] Limited attempts have been made previously to develop high-loading CBD inhalable powders, which are essential for high dose delivery. Therefore, this study aimed to develop and characterise inhalable powders with ≥ 95 % w/w CBD by wet ball milling. The effects of magnesium stearate (2 % and 5 %) and inhaler resistance (low-resistance and high-resistance RS01 inhalers) on aerosol performance were also compared. Wet ball milling produced CBD powders with > 50 % production yield. The milled particles showed irregular shapes. The powders were crystalline with minimal amorphous content, low residual solvent level (<1%), and low moisture sorption (<4%). Magnesium stearate improved both the emitted and fine particle fractions. The aerodynamic particle size distribution of the formulations differed between the low-resistance and high-resistance RS01 inhalers. The latter decreased throat deposition but increased inhaler retention. The dissolution profiles showed that all three formulations released CBD steadily and plateaued at 30 min. The best scenario was CBD with 5 % magnesium stearate dispersed from the high resistance RS01 inhaler, showing the highest FPF with the lowest throat deposition. This combination may be tested in vivo in the future to investigate its pharmacokinetic profile. [ABSTRACT FROM AUTHOR]

[Display omitted] Pulmonary delivery of drugs has emerged as a promising approach for the treatment of both lung and systemic diseases. Compared to other drug delivery routes, inhalation offers numerous advantages including high targeting, fewer side effects, and a huge surface area for drug absorption. However, the deposition of drugs in the lungs can be limited by lung defence mechanisms such as mucociliary and macrophages' clearance. Among the delivery devices, dry powder inhalers represent the optimal choice due to their stability, ease of use, and absence of propellants. In the last decades, several bottom-up techniques have emerged over traditional milling to produce inhalable powders. Among these techniques, the most employed ones are spray drying, supercritical fluid technology, spray freeze-drying, and thin film freezing. Inhalable dry powders can be constituted by micronized drugs attached to a coarse carrier (e.g., lactose) or drugs embedded into a micro- or nanoparticle. Particulate-based formulations are commonly composed of polymeric micro- and nanoparticles, liposomes, solid lipid nanoparticles, dendrimers, nanocrystals, extracellular vesicles, and inorganic nanoparticles. Moreover, engineered formulations including large porous particles, swellable microparticles, nano-in-microparticles, and effervescent nanoparticles have been developed. Particle engineering has also a crucial role in tuning the physical–chemical properties of both carrier-based and carrier-free inhalable powders. This approach can increase powder flowability, deposition, and targeting by customising particle surface features. [ABSTRACT FROM AUTHOR]

[Display omitted] The nasal administration route has been studied for the delivery of active molecules directed to the Central Nervous System, thanks to the anatomical connection between the nasal cavity and the brain. Dimethyl fumarate is used to treat relapsing-remitting multiple sclerosis, with a role as an immunomodulator towards T- T-cells and a cytoprotector towards neurons and glial cells. Its use in therapy is hindered by its low aqueous solubility, and low stability, due to hydrolysis and sublimation at room temperature. To overcome this limitation, in this study we evaluated the feasibility of using two amorphous β-cyclodextrin derivatives, namely hydroxypropyl β-cyclodextrin and methyl β-cyclodextrin, to obtain a nasally administrable powder with a view to nose-to-brain administration. Initially, the interaction product was studied using different analytical methods (differential scanning calorimetry, Fourier transform infrared spectroscopy and powder X-ray diffraction) to detect the occurrence of binary product formation, while phase solubility analysis was used to probe the complexation in solution. The dimethyl fumarate-cyclodextrin binary product showing best solubility and stability properties was subsequently used in the development of a chitosan-based mucoadhesive nasally administrable powder comparing different preparative methods. The best performance in terms of both hydrolytic stability and DMF recovery was achieved by the powder obtained via freeze-drying. [ABSTRACT FROM AUTHOR]

[Display omitted] Scheme 1. (A) Schematic illustration of a dry powder aerosol containing ciprofloxacin and colistin co-loaded liposomes (Cipro-Col-Lips) produced using the ultrasonic spray freeze drying (USFD) technique. (B) The liposomal dry powder aerosol aims to achieve efficient deposition in the respiratory tract, and accumulation at bacterial biofilm infectious sites within the lungs. (C) Schematic illustration of the rapid dissolution of the muco-inert Cipro-Col-Lips from the dry powder aerosol, the neutralization of bacterial biofilm-secreted toxins, toxin-triggered drug release, and synergistic biofilm bacterial eradication. Pseudomonas aeruginosa (PA), a predominant pathogen in lung infections, poses significant challenges due to its biofilm formation, which is the primary cause of chronic and recalcitrant pulmonary infections. Bacteria within these biofilms exhibit heightened resistance to antibiotics compared to their planktonic counterparts, and their secreted toxins exacerbate lung infections. Diverging from traditional antibacterial therapy for biofilm eradication, this study introduces a novel dry powder inhalation containing muco-inert ciprofloxacin and colistin co-encapsulated liposomes (Cipro-Col-Lips) prepared using ultrasonic spray freeze drying (USFD) technique. This USFD dry powder is designed to efficiently deliver muco-inert Cipro-Col-Lips to the lungs. Once deposited, the liposomes rapidly diffuse into the airway mucus, reaching the biofilm sites. The muco-inert Cipro-Col-Lips neutralize the biofilm-secreted toxins and simultaneously trigger the release of their therapeutic payload, exerting a synergistic antibiofilm effect. Our results demonstrated that the optimal USFD liposomal dry powder formulation exhibited satisfactory in vitro aerosol performance in terms of fine particle fraction (FPF) of 44.44 ± 0.78 %, mass median aerodynamic diameter (MMAD) of 4.27 ± 0.21 μm, and emitted dose (ED) of 99.31 ± 3.31 %. The muco-inert Cipro-Col-Lips effectively penetrate the airway mucus and accumulate at the biofilm site, neutralizing toxins and safeguarding lung cells. The triggered release of ciprofloxacin and colistin works synergistically to reduce the biofilm's antibiotic resistance, impede the development of antibiotic resistance, and eliminate 99.99 % of biofilm-embedded bacteria, including persister bacteria. Using a PA-beads induced biofilm-associated lung infection mouse model, the in vivo efficacy of this liposomal dry powder aerosol was tested, and the results demonstrated that this liposomal dry powder aerosol achieved a 99.7 % reduction in bacterial colonization, and significantly mitigated inflammation and pulmonary fibrosis. The USFD dry powder inhalation containing muco-inert Cipro-Col-Lips emerges as a promising therapeutic strategy for treating PA biofilm-associated lung infections. [ABSTRACT FROM AUTHOR]

In this work, feasibility of injection molding was demonstrated for manufacturing capsule shells. 600 µm-thick prototypes were successfully molded with pharmaceutical-grade low-viscosity polyvinyl alcohols (PVAs), possibly added with a range of different fillers. They showed reproducible weight and thickness (CV < 2 and 5, respectively), compliant behavior upon piercing (holes diameter analogous to the reference), tunable release performance (immediate and pulsatile), and moisture protection capability. To assess the latter, an on-line method relying on near infrared spectroscopy measurements was set-up and validated. Based on the data collected and considering the versatility IM would provide for product shape/thickness/composition, PVA-based molded shells could help widening the portfolio of ready-to-use capsules, representing an interesting alternative to those commercially available. Indeed, these capsules could be filled with various formulations, even those with stability issues, and intended either for oral administration or for pulmonary delivery via single-dose dry powder inhalers., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Alice Melocchi reports that equipment (i.e. NIR probe) and writing assistance were provided by Freund-Vector Corporation European Lab; Giuseppe Buratti and Andrea Gelain would like to disclose that they are employees of Freund-Vector Corporation European Lab. All the other authors have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper]., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Among the various pharmaceutical forms, tablets offer numerous advantages, like ease of administration, cost-effectiveness in production, and better stability of biomolecules. Beyond these benefits, the tablet form opens up possibilities for alternative routes for the local delivery of biopharmaceuticals such as oral or vaginal administration, thereby expanding the therapeutic applications of these biomolecules and overcoming the inconvenients associated with parenteral administration. However, to date there is limited information on the feasibility of developing biomolecules in the tablet form. In this study, we have evaluated the feasibility of developing monoclonal antibodies in the tablet form while preserving their biological properties. Different excipients and process parameters were studied to assess their impact on the antibody's integrity during tableting. ELISA results show that applying compression pressure up to 100 MPa is not detrimental to the antibody's binding properties when formulated from a lyophilized powder containing trehalose or sucrose as the major excipient. This observation was confirmed with SPR and ultracentrifugation experiments, which demonstrated that neither the binding affinity for both Fc and Fab antibody fragments nor its aggregation rate are affected by the tableting process. After compression, the tablets containing the antibodies have been shown to be stable for 6 months at room temperature., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Dry powder inhalers (DPIs) are the first choice for inhalation drug development. However, some conventional DPI formulation processes require heating, which may damage high molecular weight drugs such as proteins and nucleic acids. In this study, we propose a novel DPI preparation process that avoids the use of heat. Dry powders were prepared by cryomilling nanofiber mats composed of polyvinyl alcohol, D(-)-mannitol (Man), and α-chymotrypsin (α-Chy) as the model drug using the electrospinning method. The addition of Man conferred high dispersibility and excellent in vitro aerosol performance to the nanofiber mat powder in a very short milling time (less than 0.5 min) as assessed using the Andersen cascade impactor. Powders were classified according to the degree of friability, and among these, nanofiber mats containing 15 % Man and milled for 0.25 min exhibited the highest aerosol performance. Nanofiber mats containing Man milled for less than 0.5 min also exhibited greater α-Chy enzymatic activity than a nebulized α-Chy solution. Furthermore, single inhalation induced no significant lung tissue damage as evidenced by lactate dehydrogenase activity assays of mouse bronchoalveolar lavage fluid. This novel DPI formulation process may facilitate the safe and efficient inhalational delivery of therapeutic proteins., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Continuous manufacturing has the potential to offer several benefits for the production of oral solid dosage forms, including reduced costs, low-scale equipment, and the application of process analytical technology (PAT) for real-time process control. This study focuses on the implementation of a stream sampler to develop a near infrared (NIR) calibration model for blend uniformity monitoring in a continuous manufacturing mixing process. Feeding and mixing characterizations were performed for three loss-in-weight feeders and a commercial continuous mixer to prepare powder blends of 2.5-7.5 % w/w ibuprofen DC 85 W with a total throughput of 33 kg/h. The NIR spectral acquisition was performed after the mixing stage using a stream sampler for flowing powders. A continuous mixer shaft speed of 250 RPM was selected to operate the mixing process based on a variability analysis developed with in-line spectral data acquired using the stream sampler at 6 RPM. A partial least squares regression (PLS-R) model was performed and evaluated, yielding a root-mean-square error of prediction (RMSEP) of 0.39 % w/w and a bias of 0.05 % w/w. An independent experimental run conducted two days later revealed that the continuous mixing process and the NIR calibration model presented low day-to-day variation. The minimum practical error (MPE) and sill values through variographic analysis showed low variance associated with the sampling process using the stream sampler. Results demonstrated the promising capacity of the stream sampler coupled to an NIR probe to be implemented within continuous manufacturing processes for the real-time determination of API concentration., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

One of the most common forms of controlled release technology for oral drug delivery comprises an active ingredient dispersed in a hydrophilic matrix forming polymer such as hydroxypropyl methylcellulose (HPMC), which is tableted via direct compression. However, HPMC may pose problems in direct compression due to its poor flowability. Hence, mannitol syrup was spray-coated over fluidized HPMC particles to produce co-processed HPMC-mannitol at ratios of 20:80, 50:50, and 70:30. Particles of pure HPMC, co-processed HPMC-mannitol, and their respective physical mixtures were evaluated for powder flowability, compression profiles, and controlled release performance. It was found that co-processed HPMC-mannitol consisted of particles with improved flow compared to pure HPMC particles. Sufficiently strong tablets of >2 MPa could be produced at moderate to high compression forces of 150-200 MPa. The dissolution profile could be tuned to obtain desired release profiles by altering HPMC-mannitol ratios. Co-processed HPMC-mannitol offers an interesting addition to the formulator's toolbox in the design of controlled release formulations for direct compression., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Christina Yong Xin Kang, Wen Chin Foo, Kwan Hang Lam, Keat Theng Chow, Yuan Siang Lui, Hui Ping Goh, Antoine Salome, Baptiste Boit, Philippe Lefevre, and Rajeev Gokhale are current/past employees of Roquette and may own Roquette stock. In addition, Baptiste Boit and Philippe Lefevre have patent issued to Roquette Freres SA., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Pulmonary delivery is an efficient route of administration to deliver cannabidiol (CBD) due to the high bioavailability and fast onset of action. The major formulation challenge is the poor aqueous solubility of CBD. This study aimed to produce inhalable CBD powders with enhanced solubility and characterise their solid-state properties. CBD was spray freeze dried with mannitol or trehalose dihydrate with and without dipalmitoylphosphatidylcholine (DPPC). All four powders had acceptable yields at > 70 % with porous and spherical particles. The two crystalline mannitol powders contained less residual solvent than both amorphous trehalose ones. The addition of DPPC did not affect the crystallinity and residual solvent level of the powders. Instead, DPPC made the particles more porous, decreased the particle size from 19-23 µm to 11-13 µm, and increased CBD solubility from 0.36 µg/mL to over 2 µg/mL. The two DPPC powders were dispersed from a low resistance RS01 inhaler, showing acceptable aerosol performance with emitted fractions at 91-93 % and fine particle fractions < 5 µm at 34-43 %. These formulations can be used as a platform to deliver CBD and other cannabinoids by inhalation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Wet granulation, a particle size enlargement process, can significantly enhance the critical quality attributes of powders and improve the ability to form tablets in pharmaceutical manufacturing. In this study, a mechanistic-based population balance model is applied to twin screw wet granulation. This model incorporated a recently developed breakage kernel specifically designed for twin screw granulation, along with nucleation, layering, and consolidation. Calibration and validation were performed on Hydrochlorothiazide and Acetaminophen formulations, which exhibit different particle size and wettability characteristics. Utilizing a compartmental experimental dataset, a comprehensive global sensitivity analysis identified critical inputs impacting quality attributes. The study revealed that the nucleation rate process model, effectively represented particle size distributions for both formulations. Adjustments to nucleation and breakage rate parameters, influenced by material properties and screw configuration, improved the model's accuracy. A model-driven workflow was proposed, offering step-by-step guidelines and facilitating PBM model usage, providing essential details for future active pharmaceutical ingredient (API) formulations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

[Display omitted] Laser sintering, known as powder bed fusion–laser beam (PBF-LB), offers promising potential for the fabrication of patient-specific drugs. The aim of this study was to provide an insight into the PBF-LB process with regard to the process parameters, in particular the laser hatching distance, and its influence on the properties of zolpidem tartrate (ZT) tablets. PHARMACOAT® 603 was used as the polymer, while Candurin® Gold Sheen and AEROSIL® 200 were added to facilitate 3D printing. The particle size distribution of the powder blend showed that the layer height should be set to 100 µm, while the laser hatching distance was varied in five different steps (50, 100, 150, 200 and 250 µm), keeping the temperature and laser scanning speed constant. Increasing the laser hatching distance and decreasing the laser energy input led to a decrease in the colour intensity, mass, density and hardness of the ZT tablets, while the disintegration and dissolution rate were faster due to the more fragile bonds between the particles. The laser hatching distance also influenced the ZT dosage, indicating the importance of this process parameter in the production of presonalized drugs. The absence of drug-polymer interactions and the amorphization of the ZT were confirmed. [ABSTRACT FROM AUTHOR]

[Display omitted] Inhalation of pharmaceutical aerosol formulations is widely used to treat respiratory diseases. Spatially resolved thermal characterization offers promise for better understanding drug release rates from particles; however, this has been an analytical challenge due to the small particle size (from a few micrometers down to nanometers) and the complex composition of the formulations. Here, we employ nano-thermal analysis (nanoTA) to probe the nanothermal domain of a pharmaceutical aerosol formulation containing a mixture of fluticasone propionate (FP), salmeterol xinafoate (SX), and excipient lactose, which is widely used to treat asthma and chronic obstructive pulmonary disease (COPD). Furthermore, atomic force microscopy-infrared spectroscopy (AFM-IR) and AFM force measurements are performed to provide nanochemical and nanomechanical information to complement the nanothermal data. The colocalized thermal and chemical mapping clearly reveals the surface heterogeneity of the drugs in the aerosol particles and demonstrates the contribution of the surface chemical composition to the variation in the thermal properties of the particles. We present a powerful analytical approach for in-depth characterization of thermal/chemical/morphological properties of dry powder inhaler particles at micro- and nanometer scales. This approach can be used to facilitate the comparison between generics and reference inhalation products and further the development of high-performance pharmaceutical formulations. [ABSTRACT FROM AUTHOR]

[Display omitted] Surface powder sticking in pharmaceutical mixing vessels poses a risk to the uniformity and quality of drug formulations. This study explores methods for evaluating the amount of pharmaceutical powder mixtures adhering to the metallic surfaces. Binary powder blends consisting of amlodipine and microcrystalline cellulose (MCC) were used to investigate the effect of the mixing order on the adherence to the vessel wall. Elevated API concentrations were measured on the wall and within the dislodged material from the surface, regardless of the mixing order of the components. UV imaging was used to determine the particle size and the distribution of the API on the metallic surface. The results were compared to chemical maps obtained by Raman chemical imaging. The combination of UV and VIS imaging enabled the rapid acquisition of chemical maps, covering a substantially large area representative of the analysed sample. UV imaging was also applied in tablet inspection to detect tablets that fail to meet the content uniformity criteria. The results present powder adherence as a possible source of poor content uniformity, highlighting the need for 100% inspection of pharmaceutical products to ensure product quality and safety. [ABSTRACT FROM AUTHOR]

[Display omitted] The potential of fine excipient materials to improve the aerodynamic performance of carrier-based dry powder inhalation (DPI) formulations is well acknowledged but not fully elucidated. To improve the understanding of this potential, we studied two fine excipient materials: micronized lactose particles and silica microspheres. Inhalation formulations, each composed of a coarse lactose carrier, one of the two fine excipient materials (0.0–15.0 % w / w), and a spray-dried drug (fluticasone propionate) material (1.5 % w / w) were prepared. The physical structure, the flow behavior, the aerosolization behavior, and the aerodynamic performance of the formulations were studied. The two fine excipient materials similarly occupied carrier surface macropores. However, only the micronized lactose particles formed agglomerates and appeared to increase the tensile strength of the formulations. At 2.5 % w / w , the two fine excipient materials similarly improved drug dispersibility, whereas at higher concentrations, the micronized lactose material was more beneficial than the silica microspheres. The findings suggest that fine excipient materials improve drug dispersibility from carrier-based DPI formulations at low concentrations by filling carrier surface macropores and at high concentrations by forming agglomerates and/or enforcing fluidization. The study emphasizes critical attributes of fine excipient materials in carrier-based DPI formulations. [ABSTRACT FROM AUTHOR]

[Display omitted] The treatment of chronic respiratory infections caused by biofilm formation are extremely challenging owing to poor drug penetration into the complex biofilm structure and high drug resistance. Local delivery of an antibiotic together with a non-antibiotic adjuvant to the lungs could often enhance the therapeutic responses by targeting different bacterial growth pathways and minimizing drug resistance. In this study, we designed new inhalable dry powders containing ciprofloxacin (CIP) and OligoG (Oli, a low-molecular-weight alginate oligosaccharide impairing the mucoid biofilms by interacting with their cationic ions) to combat respiratory bacterial biofilm infections. The resulting powders were characterized with respect to their morphology, solid-state property, surface chemistry, moisture sorption behavior, and dissolution rate. The aerosol performance and storage stability of the dry powders were also evaluated. The results showed that inhalable dry powders composed of CIP and Oli could be readily accomplished via the wet milling and spray drying process. Upon the storage under 20 ± 2 °C/20 ± 2 % relative humidity (RH) for one month, there was no significant change in the in vitro aerosol performances of the dry powders. In contrast, the dry powders became non-inhalable following the storage at 20 ± 2 °C/53 ± 2 % RH for one month due to the hygroscopic nature of Oli, which could be largely prevented by incorporation of leucine. Collectively, this study suggests that the newly developed co-spray-dried powders composed of CIP and Oli might represent a promising and alternative treatment strategy against respiratory bacterial biofilm infections. [ABSTRACT FROM AUTHOR]

[Display omitted] Tuberculosis (TB) is caused by Mycobacterium tuberculosis (M.tb) and is the second leading cause of death from an infectious disease globally. The disease mainly affects the lungs and forms granulomatous lesions that encapsulate the bacteria, making treating TB challenging. The current treatment includes oral administration of bedaquiline (BDQ) and pretomanid (PTD); however, patients suffer from severe systemic toxicities, low lung drug concentration, and non-adherence. In this study, we developed BDQ-PTD loaded nanoparticles as inhalable dry powders for pulmonary TB treatment using a Quality-by-Design (QbD) approach. The BDQ-PTD combination showed an additive/synergistic effect for M.tb inhibition in vitro , and the optimized drug ratio (1:4) was successfully loaded into polymeric nanoparticles (PLGA NPs). The QbD approach was implemented by identifying the quality target product profile (QTPPs), critical quality attributes (CQAs), and critical process parameters (CPPs) to develop efficient design space for dry powder preparation using spray drying. The three-factorial and three-level Box-Behnken Design was used to assess the effect of process parameters (CPPs) on product quality (CQAs). The Design of Experiments (DoE) analysis showed different regression models for product quality responses and helped optimize process parameters to meet QTPPs. The optimized dry powder showed excellent yield (72 ± 2 % w/w), high drug (BDQ-PTD) loading, low moisture content (<1% w/w), and spherical morphology. Further, aerosolization performance revealed the suitability of powder for deposition in the respiratory airways of the lungs (MMAD 2.4 µm and FPF > 75 %). In conclusion, the QbD approach helped optimize process parameters and develop dry powder with a suitable quality profile for inhalation delivery in TB patients. [ABSTRACT FROM AUTHOR]

[Display omitted] • New kneading elements were developed with reduced width and increased clearance. • New kneading elements reduce peak shear & dispersive mixing at kneading zone. • Higher barrel temperature & degree of fill is needed to compensate for lost shear. • Stable granules were formulated for thermolabile gabapentin by a thermal process. Twin-screw melt granulation (TSMG) relies on the dispersive and distributive mixing at the kneading zone for granule growth to happen highlighting the critical role played by the kneading elements in TSMG. Despite extensive research conducted on the impact of screw geometry in melt compounding, there is not enough literature for TSMG. Disc width for the kneading elements was 2 mm, contrary to the standard 5 mm. The objective of this study was to evaluate if varying overflight clearance (OC) can alter the paradigm for TSMG. The new elements reduce the peak shear at kneading zone however a higher barrel temperature and degree of fill (DoF) is required to compensate to attain similar granule attributes. The change in DoF was achieved through a combination of modified screw configuration to pre-densify powders before kneading and processing at a lower screw speed. Despite the higher barrel temperature, process optimization of thermally unstable gabapentin was carried out. Using the new elements, compressible granules (Tensile strength > 2 MPa) with low % GABA-L content were manufactured despite increasing OC to 0.4 mm. Granule stability at 40 °C, ambient humidity for 6 months indicated gabapentin was stable (% GABA-L ≪0.4 %) despite a high barrel temperature of 120 °C. [ABSTRACT FROM AUTHOR]

[Display omitted] The therapeutic potential of pharmaceutical cocrystals in intranasal applications remains largely unexplored despite progressive advancements in cocrystal research. We present the application of spray freeze drying (SFD) in successful fabrication of a favipiravir-pyridinecarboxamide cocrystal nasal powder formulation for potential treatment of broad-spectrum antiviral infections. Preliminary screening via mechanochemistry revealed that favipiravir (FAV) can cocrystallize with isonicotinamide (INA), but not nicotinamide (NCT) and picolinamide (PIC) notwithstanding their structural similarity. The cocrystal formation was characterized by differential scanning calorimetry, Fourier-transform infrared spectroscopy, and unit cell determination through Rietveld refinement of powder X-ray analysis. FAV-INA crystalized in a monoclinic space group P 2 1 / c with a unit cell volume of 1223.54(3) Å3, accommodating one FAV molecule and one INA molecule in the asymmetric unit. The cocrystal was further reproduced as intranasal dry powders by SFD, of which the morphology, particle size, in vitro drug release, and nasal deposition were assessed. The non-porous flake shaped FAV-INA powders exhibited a mean particle size of 19.79 ± 2.61 μm, rendering its suitability for intranasal delivery. Compared with raw FAV, FAV-INA displayed a 3-fold higher cumulative fraction of drug permeated in Franz diffusion cells at 45 min (p = 0.001). Dose fraction of FAV-INA deposited in the nasal fraction of a customized 3D-printed nasal cast reached over 80 %, whereas the fine particle fraction remained below 6 % at a flow rate of 15 L/min, suggesting high nasal deposition whilst minimal lung deposition. FAV-INA was safe in RPMI 2650 nasal and SH-SY5Y neuroblastoma cells without any in vitro cytotoxicity observed. This study demonstrated that combining the merits of cocrystallization and particle engineering via SFD can propel the development of advanced dry powder formulations for intranasal drug delivery. [ABSTRACT FROM AUTHOR]

[Display omitted] Monoclonal antibodies (mAbs) administered intranasally as dry powders can be potentially applied for the treatment or pre-exposure prevention of viral infections in the upper respiratory tract. However, a method to transform the mAbs from liquid to dry powders suitable for intranasal administration and a device that can spray the dry powders to the desired region of the nasal cavity are needed to fully realize the potentials of the mAbs. Herein, we report that thin-film freeze-dried mAb powders can be sprayed into the posterior nasal cavity using Aptar Pharma's Unidose (UDS) Powder Nasal Spray System. AUG-3387, a human-derived mAb that neutralizes the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), was used in the present study. First, we prepared thin-film freeze-dried AUG-3387 powders (i.e., TFF AUG-3387 powders) from liquid formulations containing different levels of mAbs. The TFF AUG-3387 powder with the highest solid content (i.e., TFF AUG-3387C) was then chosen for further characterization, including the evaluation of the plume geometry, spray pattern, and particle size distribution after the powder was sprayed using the UDS Powder Nasal Spray. Finally, the deposition patterns of the TFF AUG-3387C powder sprayed using the UDS Powder delivery system were studied using 3D-printed nasal replica casts based on the CT scans of an adult and a child. It is concluded that it is feasible to intranasally deliver mAbs as dry powders by transforming the mAbs into dry powders using thin-film freeze-drying and then spraying the powder using a powder nasal spray system. [ABSTRACT FROM AUTHOR]

[Display omitted] A dry powder inhaled liposomal azithromycin formulation was developed for the treatment of chronic respiratory diseases such as cystic fibrosis and bronchiectasis. Key properties including liposome size, charge and encapsulation efficiency powder size, shape, glass transition temperature (Tg), water content and in vitro respiratory deposition were determined. Antimicrobial activity against cystic fibrosis (CF) respiratory pathogens was determined by MIC, MBC and biofilm assays. Cytotoxicity and cellular uptake studies were performed using A549 cells. The average liposome size was 105 nm, charge was 55 mV and encapsulation efficiency was 75 %. The mean powder particle size d[v,50] of 4.54 µm and Mass Median Aerodynamic Diameter (MMAD) was 5.23 µm with a mean Tg of 76˚C and water content of 2.1 %. These excellent physicochemical characteristics were maintained over one year. Liposomal loaded azithromycin demonstrated enhanced activity against P. aeruginosa clinical isolates grown in biofilm. The formulation was rapidly delivered into bacterial cells with > 75 % uptake in 1 h. Rapid uptake into A549 cells via a cholesterol-dependent endocytosis pathway with no cytotoxic effects apparent. These data demonstrate that this formulation could offer benefits over current treatment regimens for people with chronic respiratory infection. [ABSTRACT FROM AUTHOR]

Residence time distribution (RTD) method has been widely used in the pharmaceutical manufacturing for understanding powder dynamics within unit operations and continuous integrated manufacturing lines. The dynamics thus captured is then used to develop predictive models for unit operations and important RTD-based applications ensuring product quality assurance. Despite thorough efforts in tracer selection, data acquisition, and calibration model development to obtain tracer concentration profiles for RTD studies, there can exist significant noise in these profiles. This noise can make it challenging to identify the underlying signal and get a representative RTD of the system under study. Such concerns have previously indicated the importance of noise handling for RTD measurements in literature. However, the literature does not provide sufficient information on noise handling or data treatment strategies for RTD studies. To this end, we investigate the impact of varying levels of noise using different tracers on measurement of RTD profile and its applications. We quantify the impact of different denoising methods (time and frequency averaging methods). Through this investigation, we see that Savitsky Golay filtering turns out to a good method for denoising RTD profiles despite varying noise levels. The investigation is performed such that the key features of the RTD profile (which are important for RTD based applications) are preserved. Subsequently, we also investigate the impact of denoising on RTD-based applications such as out-of-specification (OOS) analysis and RTD modeling. The results show that the degree of noise levels considered in this work do not significantly impact the RTD-based applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Aerosol drug delivery in the human airway is significantly affected by the morphology and size of the airway. This work developed a CFD-DEM model to simulate and analyze air flow and powder dynamics in combined inhaler-airway systems with different degrees of airway deformation (non-deformed, 50%, and 75% deformed) and sizes (adult, 0.80, and 0.62 scaled). The airways were generated based on a regular airway constructed from the MRI images through finite element method (for deformed airways) or scaling-down (for smaller airways). The airways were connected to Turbuhaler® through a connector. The results showed that under the same flow rate, the variation in the airway geometry and size had a minimum impact on the flow field and powder deposition in the device and the connector. However, deformation caused more particle deposition in the deformed region. Notably, the airway with 50% deformation had the most particles passing through the airway with the largest particle sizes due to its lower air velocity in the deformed area. Reducing airway size resulted in more powder deposition on the airway, particularly at the pharynx and mouth regions. This was because, with the same flow rate, the flow velocity in the smaller airway was higher, causing more particle-wall collisions in the mouth and pharynx regions. More importantly, the deposition efficiency in the 0.62-scaled airway was significantly higher than the other two airways, highlighting the importance of the different administration of aerosol drugs for young children., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Spray drying is increasingly being applied to process biopharmaceuticals, particularly monoclonal antibodies (mAbs). However, due to their protein nature, mAbs are susceptible to degradation when subjected to various stresses during a drying process. Despite extensive research in this domain, identifying the appropriate formulation composition and spray drying conditions remains a complex challenge, requiring further studies to enhance the understanding on how process and formulation parameters impact mAb stability in reconstituted solutions. This research aims to explore spray drying as technique for producing pharmaceutical mAbs-based powders intended for reconstitution and subcutaneous injection. In the initial phase of this study, using a model mAb (mAb-A), the influence of dissociated and coupled process stresses on protein stability after solution reconstitution was investigated. The findings revealed a detrimental interplay of mechanical, interfacial, and thermal/dehydration stresses on mAb-A stability, notably characterized by an increase in protein aggregation. Subsequently, in a second phase, the study delved into the impact of spray drying processing conditions, the level of excipients, and protein concentration on mAb-A aggregation in reconstituted solutions. The obtained results highlighted the critical role of formulation composition as a parameter deserving further study, specifically concerning the selection of type and concentration of stabilizers to be added in the liquid mAb-A solution to be dried., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Angiotensin-converting enzyme 2 (ACE2) is responsible for cell fusion with SARS-CoV viruses. ACE2 is contained in different areas of the human body, including the nasal cavity, which is considered the main entrance for different types of airborne viruses. We took advantage of the roles of ACE2 and the nasal cavity in SARS-CoV-2 replication and transmission to develop a nasal dry powder. Recombinant ACE2 (rhACE2), after a proper encapsulation achieved via spray freeze drying, shows a binding efficiency with spike proteins of SARS-CoV-2 higher than 77 % at quantities lower than 5 µg/ml. Once delivered to the nose, encapsulated rhACE2 led to viability and permeability of RPMI 2650 cells of at least 90.20 ± 0.67 % and 47.96 ± 4.46 %, respectively, for concentrations lower than 1 mg/ml. These results were validated using nasal dry powder containing rhACE2 to prevent or treat infections derived from SARS-CoV-2., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

A precompression pressure optimization strategy using in-die elastic recovery was developed to effectively address tablet lamination caused by air entrapment. This strategy involves exacerbating the air entrapment issue using high tableting speeds and main compaction pressures and collecting in-die elastic recovery data as a function of precompression pressure. The optimized precompression pressure, which corresponds to the minimum elastic recovery, is most effective at eliminating air from the powder bed prior to the main compression. When the optimized precompression pressure was employed, intact tablets of a model blend prone to lamination due to air entrapment could be produced over a wide range of high main compaction pressures, while tablets without precompression laminated immediately after ejection at equivalent main compaction pressures. This optimization strategy is effective for addressing lamination issues due to air entrapment using precompression. An advantage of this strategy is that intact tablets are not required to identify an optimized precompression pressure since elastic recovery measurements occur in-die., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Conventional intravenous chemotherapy for lung cancer frequently results in inefficient drug penetration into primary lung tumors and severe systemic toxicities. This study reports the development of inhalable paclitaxel (PTX) nanoagglomerate dry powders (PTX-NADP) for enhanced pulmonary delivery of PTX chemotherapy to lung tumors using full factorial Design of Experiments. PTX nanoparticles were fabricated by flash nanoprecipitation with the aid of N-polyvinylpyrrolidone (PVP) and curcumin (CUR) as stabilizer and co-stabilizer respectively, and subsequently agglomerated into inhalable dry powders via co-spray drying with methylcellulose. The optimized PTX-NADP formulation exhibited acceptable aqueous redispersibility (redispersibility index = 1.17 ± 0.02) into ∼ 150 nm nanoparticles and superb in vitro aerosol performance [mass median aerodynamic diameter (MMAD) = 1.69 ± 0.05 µm and fine particle fraction (FPF) of 70.89 ± 1.72 %] when dispersed from a Breezhaler® at 90 L/min. Notably, adequate aerosolization (MMAD < 3.5 µm and FPF > 40 %) of the optimized formulation was maintained when dispersed at reduced inspiratory flow rates of 30 - 60 L/min. Redispersed PTX nanoparticles from PTX-NADP demonstrated enhanced in vitro antitumor efficacy and cellular uptake in A549 lung adenocarcinoma cells without compromising tolerability of BEAS-2B normal lung epithelial cells towards PTX chemotherapy. These findings highlight the potential of inhaled PTX-NADP therapy to improve therapeutic outcomes for lung cancer patients with varying levels of pulmonary function impairment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Successful oral delivery of liposomes requires formulations designed to withstand harsh gastrointestinal conditions, e.g., by converting to solid-state followed by loading into gastro-resistant delivery devices. The hypothesis was that the use of dextran-trehalose mixtures for spray drying would improve the rehydration kinetics of dried liposomes. The objectives were to determine the protective capacity of trehalose-dextran dehydration precursors and to increase the concentration of liposomes in the dry formulation volume. The study successfully demonstrated that 8.5% dextran combined with 76.5% trehalose protected CAF®04 liposomes during drying, with the liposome content maintained at 15% of the dry powder. Accordingly, the rehydration kinetics were slightly improved in formulations containing up to 8.5% dextran in the dry powder volume. Additionally, a 2.4-fold increase in lipid concentration (3 mM vs 7.245 mM) was achieved for spray dried CAF®04 liposomes. Ultimately, this study demonstrates the significance of trehalose as a primary carrier during spray drying of CAF®04 liposomes and highlights the advantage of incorporating small amounts of dextran to tune rehydration kinetics of spray-dried liposomes., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: AL, GKP, STS are employed at Statens Serum Institut, which is a non-profit government research facility and holds patents on the CAF®-based adjuvants. All other authors declare that there are no competing interests., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

[Display omitted] Extracellular vesicles (EVs) are endogenous vesicles that comprise a variety of submicron vesicular structures. Among these, exosomes have been widely investigated as delivery systems for small and large molecules. Herein, the thin-film freeze-drying technology was utilized to engineer aerosolizable dry powders of miR-335-laden induced EVs (iEV-335) generated in B cells for potential delivery into the lung to treat primary lung cancer and/or pulmonary metastases. The size distribution, structure, and morphology of iEV-335 were preserved after they were subjected to thin-film freeze-drying with the proper excipients. Importantly, iEV-335, in liquid or reconstituted from thin-film freeze-dried powders, were equally effective in downregulating SOX4 gene expression in LM2 human triple-negative mammary cancer cells. The iEV-335 dry powder compositions showed mass median aerodynamic diameters (MMAD) of around 1.2 µm with > 60 % of the emitted doses had an MMAD of ≤ 3 µm, indicating that the powders can potentially achieve efficient deposition within the alveolar region following oral inhalation, which is desirable for treatment of primary lung cancer and pulmonary metastases. Overall, it is concluded that it is feasible to apply thin-film freeze-drying to prepare aerosolizable dry powders of iEVs for pulmonary delivery. [ABSTRACT FROM AUTHOR]

[Display omitted] Long-acting injectables have shown to offer a prolonged release of a drug compound up to several months, providing the opportunity to increase patient compliance for treatment of long-term and chronic conditions. Different formulation technologies have already been utilized for long-acting injectables, and especially aqueous suspensions with crystalline drug particles in the sub-micron range have sparked an interest for future development of long-acting injectables. Wet bead milling is a common top-down process used to prepare nano- and microsuspensions of crystalline drug particles with the addition of surfactants in the dispersion medium, which are working as stabilizers to prevent agglomeration or crystal growth that ultimately may influence the physical stability of nano- and microsuspensions. To examine the reproducibility of the suspensions manufactured and the behavior of their physical stability, i.e., changes in particle sizes over time, low-energy roller mill was utilized for the manufacturing of nano- and microsuspensions in the present study. Investigated formulation parameters was stabilizer type and concentration and milling parameters varied in bead size and duration of milling. The obtained results demonstrated that the physical stability of suspensions containing the two model compounds, cinnarizine and indomethacin, was highly affected by the constitution of surfactant and processing. Various size classes were obtained and accompanied by high variations between the individual samples that indicated uneven and unpredictable milling by the low-energy roller mill, limiting the possibility to prepare reproducible and physical stable suspensions. Short-term stability studies revealed clear tendencies towards reversed Ostwald ripening of suspensions stabilized with poloxamer 188 that contained cinnarizine as the drug compound, and to a smaller extent suspensions containing indomethacin. Furthermore, X-ray Powder Diffraction confirmed no alteration of the drug compounds crystal structure after roller milling for multiple days. [ABSTRACT FROM AUTHOR]

[Display omitted] Near infrared (NIR) spectroscopy is a valuable analytical technique for monitoring chemical composition of powder blends in continuous pharmaceutical processes. However, the variation in density captured by NIR during spectral collection of dynamic powder streams at different flow rates often reduces the performance and robustness of NIR models. To overcome this challenge, quantitative NIR measurements are commonly collected across all potential manufacturing conditions, including multiple flow rates to account for the physical variations. The utility of this approach is limited by the considerable quantity of resources required to run and analyze an extensive calibration design at variable flow rates in a continuous manufacturing (CM) process. It is hypothesized that the primary variation introduced to NIR spectra from changing flow rates is a change in the density of the powder from which NIR spectra are collected. In this work, powder stream density was used as an efficient surrogate for flow rate in developing a quantitative NIR method with enhanced robustness against process rate variation. A density design space of two process parameters was generated to determine the conditions required to encompass the apparent density and spectral variance from increases in process rate. This apparent density variance was included in calibration at a constant low flow rate to enable the development of a density-insensitive NIR quantitative model with limited consumption of materials. The density-insensitive NIR model demonstrated comparable prediction performance and flow rate robustness to a traditional NIR model including flow rate variation ("gold standard" model) when applied to monitoring drug content in continuous runs at varying flow rates. The proposed platform for the development of in-line density-insensitive NIR methods is expected to facilitate robust analytical model performance across variable continuous manufacturing production scales while improving the material efficiency over traditional robust modeling approaches for calibration development. [ABSTRACT FROM AUTHOR]

[Display omitted] Mebendazole (MBZ) is a broad-spectrum active pharmaceutical ingredient (API) indicated for treating parasitosis, and it has three solid-state forms, A, B, and C. These solid forms exhibit significant differences in dissolution properties, which cause considerable changes in the therapeutic effect. When at least 30 % of Form A is present in the formulation, it has a similar effect to the placebo. The aim of this study was to develop a reliable quantitative method for MBZ (Forms A and C) suspensions that allowed to study the solid-state stability and the kinetics of the solid-state transformation of MBZ suspensions under the recommended pharmaceutical industry conditions. One method was developed to carry out the drying process and the other one to quantify Forms A and C of MBZ suspensions; both were evaluated. For the stability study, samples were prepared with different starting reference concentrations of Form A and stored from 1 to 24 months under long-term stability conditions (30 ± 2 °C and 75 ± 5 % RH) and from 1 to 6 months under accelerated stability conditions (40 ± 2 °C and 75 ± 5 % RH). Data collection was performed by powder X-ray diffraction (PXRD). The Rietveld method (RM) and Topas's program were used to solid form quantification. Avrami's equation was used to determine the kinetic parameters. The results showed that the combination of the drying process and solid form quantification developed method for suspension was a very accurate methodology for solid-state stability studies. Furthermore, in long-term and accelerated solid-state conditions, suspension with an initial value of 1 % of Form A were sufficient to cause a solid-state transformation (Form C to A) greater than 30 % in the first and second months, with a complete transformation in nine and six months respectively. These results demonstrate that suspensions show complete solid-state transformation (Form C to A) in a shorter time than the product's shelf life (∼2 years). In this work, a reliable methodology was developed to quantify MBZ (Forms A and C) suspensions. This methodology could be used to control the different solid forms for MBZ and other APIs to avoid solid-state transformation problems. [ABSTRACT FROM AUTHOR]

A swirling airflow is incorporated in several dry powder inhalers (DPIs) for effective powder de-agglomeration. This commonly requires the use of a flow-straightening grid in the DPI to reduce drug deposition loss caused by large lateral spreading of the emerging aerosol. Here, we propose a novel grid-free DPI design concept that improves the aerosol flow characteristics and reduces the aforementioned drug loss. The basis of this design is the implementation of a secondary airflow that swirls in the opposite direction (counter-swirl) to that of a primary swirling airflow. In-vitro deposition, computational fluid dynamics simulations and particle image velocimetry measurements are used to evaluate the counter-swirl DPI aerosol performance and flow characteristics. In comparison with a baseline-DPI that has only a primary swirling airflow, the counter-swirl DPI has 20% less deposition of the emitted drug dose in the induction port and pre-separator of a next generation impactor (NGI). This occurs as a result of the lower flow-swirl generated from the counter-swirl DPI which eliminates the axial reverse flow outside of the mouthpiece and substantially reduces lateral spreading in the exiting aerosol. Modifications to the counter-swirl DPI design were made to prevent drug loss from the secondary airflow tangential inlets, which involved the addition of wall perforations in the tangential inlets and the separation of the primary and secondary swirling airflows by an annular channel. These modified DPI devices were successful in that aspect but had higher flow-swirl than that in the counter-swirl DPI and thus had higher drug mass retained in the device and deposited in the induction port and pre-separator of the NGI. The fine particle fraction in the aerosols generated from all the counter-swirl -based DPIs and the baseline-DPI are found to be statistically similar to each other. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Spray drying was used to co-formulate ovalbumin (OVA) and ZnO with mannitol and hyaluronic acid into dry powder vaccine formulations. • The vaccine dry powder formulations display solid-state and aerosol properties, which are optimal for lung deposition. • Reconstituted dry powder vaccine formulations are well-tolerated by Calu-3 cells and induce maturation of murine dendritic cells. • Reconstituted dry powder vaccine formulations induce serum antibody and polyfunctional CD8+ T cell responses in mice. Most licensed human vaccines are based on liquid dosage forms but have poor storage stability and require continuous and expensive cold-chain storage. In contrast, the use of solid vaccine dosage forms produced by for example spray drying, extends shelf life and eliminates the need for a cold chain. Zinc oxide (ZnO)-based nanoparticles display immunomodulatory properties, but their adjuvant effect as a dry powder formulation is unknown. Here, we show that reconstituted dry powder formulations of ZnO particles containing the model antigen ovalbumin (OVA) induce antigen-specific CD8+ T-cell and humoral responses. By systematically varying the ratio between ZnO and mannitol during spray drying, we manufactured dry powder formulations of OVA-containing ZnO particles that displayed: (i) a spherical or wrinkled surface morphology, (ii) an aerodynamic diameter and particle size distribution optimal for deep lung deposition, and (iii) aerosolization properties suitable for lung delivery. Reconstituted dry powder formulations of ZnO particles were well-tolerated by Calu-3 lung epithelial cells. Furthermore, almost equivalent OVA-specific serum antibody responses were stimulated by reconstituted ZnO particles, OVA adjuvanted with Alhydrogel®, and OVA adjuvanted with the cationic adjuvant formulation 01 (CAF®01). However, reconstituted dry powder ZnO particles and OVA adjuvanted with Alhydrogel® induced significantly lower OVA-specific CD8+CD44+ T-cell responses in the spleen than OVA adjuvanted with CAF®01. Similarly, reconstituted dry powder ZnO particles activated significantly lower percentages of follicular helper T cells and germinal center B cells in the draining lymph nodes than OVA adjuvanted with CAF®01. Overall, our results show that reconstituted dry powder formulations of ZnO nanoparticles can induce antigen-specific antibodies and can be used in vaccines to enhance antigen-specific humoral immune responses against subunit protein antigens. [ABSTRACT FROM AUTHOR]

[Display omitted] • A nanodrug pulmonary delivery system was developed by utilizing the supercritical antisolvent fluidized-bed coating process (SAS-FB). • The optimized inhalation formulation demonstrates superior in vivo pharmacokinetic performance compared to the raw naringin administered orally. • The mechanism underlying the difference in aerosolization deposition of homemade SAS-FB products was investigated. • The SAS-FB technology represents a practical approach for the preparation of dry powder inhaler for nanomedicine. The supercritical antisolvent-fluidized bed coating process (SAS-FB) shows great potential as a technique to manufacture dry powder inhaler (DPI) that incorporate nanodrugs onto micronized matrix particles, capitalizing on the merits of both nanoparticle and pulmonary delivery. In this study, naringin (NAR), a pharmacologically active flavonoid with low solubility and in vivo degradation issues, was utilized as a model active pharmaceutical ingredient to construct nanomedicine-based DPI through SAS-FB. It is showed that processed NAR exhibited a near-spherical shape and an amorphous structure with an average size of around 130 nm. Notably, SAS-FB products prepared with different fluidized matrices resulted in varying deposition patterns, particularly when mixed with a coarse lactose to enhance the fine particle fraction (FPF) of the formulations. The FPF was positively associated with specific surface area of the SAS-FB products, while the specific surface area was directly related to surface roughness and particle size. In vitro dissolution studies using simulated lung fluid revealed that the NAR nanoparticles coated on the products were released immediately upon contact with solution, with a cumulative dissolution exceeding 90% within the first minute. Importantly, compared to oral raw NAR, the optimized DPI formulation demonstrated superior in vivo plasmatic and pulmonary AUC 0→∞ by 51.33-fold and 104.07-fold respectively in a Sprague-Dawley rat model. Overall, SAS- FB technology provides a practical approach to produce nanomedicine DPI product that combine the benefits of nanoparticles with the aerodynamics properties of inhaled microparticles. [ABSTRACT FROM AUTHOR]

Twin-screw wet granulation is an emerging continuous manufacturing technology for solid oral dosage forms. This technology has been successfully employed for the commercial manufacture of immediate-released tablets. However, the higher polymer content in extended-release (ER) formulations may present challenges in developing and operating within a desired design space. The work described here used a systematic approach for defining the optimum design space by understanding the effects of the screw design, operating parameters, and their interactions on the critical characteristics of granules and ER tablets. The impacts of screw speed, powder feeding rate, and the number of kneading (KEs) and sizing elements on granules and tablets characteristics were investigated by employing a definitive screening design. A semi-mechanistic model was used to calculate the residence time distribution parameters and validated using the tracers. The results showed that an increase in screw speed decreased the mean residence time of the material within the barrel, while an increase in the powder feeding rate or number of KEs did the opposite and increased the barrel residence time. Screw design and operating parameters affected the flow and bulk characteristics of granules. The screw speed was the most significant factor impacting the tablet's breaking strength. The dissolution profiles revealed that granule characteristics mainly influenced the early phase of drug release. This study demonstrated that a simultaneous optimization of both operating and screw design parameters was beneficial in producing ER granules and tablets of desired performance characteristics while mitigating any failure risks, such as swelling during processing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Published by Elsevier B.V.)