Search

Purpose: Heat exchangers (HEXs) are extensively used in many applications such as heating and cooling systems. To increase the thermal performance of HEXs, nano-sized particles could be added to the base working fluid which can improve the thermophysical properties of the fluid. In addition, further improvement in the thermal performance of nanofluids can be obtained by using two or more different nanoparticles which are known as hybrid nanofluids. This paper aims to improve the thermal efficiency of U-type tubular HEX (THEX) by using CuO-Al2O3/water hybrid nanofluid. Design/methodology/approach: Numerical simulation has been used to model THEX with various configurations. Also, CuO-Al2O3/water hybrid nanofluid has been experimented in THEX in two various modes including parallel (PTHEX) and counter flow (CTHEX) regarding to the numerical findings. Hybrid nanofluids have been prepared in two particle concentrations and compared with CuO/water nanofluid at the same concentrations and also with water. Findings: The numerical simulation results showed that adding fins and also using hybrid nanofluid can increase heat transfer rate in HEX. However, adding fins cannot be a good option in U-type THEX with lower diameter because it increases pressure drop notably. Experimental results of this work illustrated that using Al2O3-CuO/water hybrid nanofluid in the THEX improved thermal performance significantly. Maximum enhancement in overall heat transfer coefficient of THEX by using CuO-Al2O3/water nanofluid in 0.5% and 1% concentrations achieved as 9.5% and 12%, respectively. Originality/value: The obtained findings of the study showed the positive effects of using hybrid type nanofluid in comparison with single type nanofluid. In this study, numerical and experimental analysis have been conducted to investigate the effect of using hybrid type nanofluid in U-type HEX. The obtained results exhibited successful utilization of CuO-Al2O3/water hybrid type nanofluid in HEX. Moreover, it was observed that thermal performance analysis of the nanofluids without any experiment can be done by using numerical method. [ABSTRACT FROM AUTHOR]

Purpose: The plate heat exchangers (PHE) with small size but large efficiency are compact types of heat exchangers formed by corrugated thin pressed plates, operating at higher pressures when compared to most other traditional exchangers. This paper aims to analyze heat transfer characteristics in the PHE experimentally and numerically. Design/methodology/approach: Computational fluid dynamics analysis has been used to simulate the problem by using the ANSYS fluent 16 software. Also, the effect of using TiO2/water nanofluid as working fluid was investigated. TiO2/water nanofluid had 2% (Wt/Wt) nanoparticle content. To improve solubility of the TiO2 nanoparticles, Triton X-100 was added to the mixture. The results have been achieved in different working condition with changes in fluid flow rate and its temperature. Findings: The obtained results showed that using TiO2/water nanofluid improved the overall heat transfer coefficient averagely as 6%, whereas maximum improvement in overall heat transfer coefficient was 10%. Also, theoretical and experimental results are in line with each other. Originality/value: The most important feature which separates the present study from the literature is that nanofluid is prepared by using TiO2 nanoparticles in optimum size and mixing ratio with surfactant usage to prevent sedimentation and flocculation problems. This process also prevents particle accumulation that may occur inside the PHE. The main aim of the present study is to predict heat transfer characteristics of nanofluids in a plate heat exchanger. Therefore, it will be possible to analyze thermal performance of the nanofluids without any experiment. [ABSTRACT FROM AUTHOR]