Search

Polyurethane/silk protein–bismuth halide oxide composite films were fabricated using a blending-wet phase transformationin situsynthesis method. The crystal structure, micromorphology, and optical properties were conducted using XRD, SEM, and UV-Vis DRS characterize techniques. The results indicated that loaded silk protein enhanced the hydrophilicity and pore structure of the polyurethane composite films. The active species BiOX were observed to grow as nanosheets with high dispersion on the internal skeleton and silk protein surface of the polyurethane–silk protein film. The photocatalytic efficiency of BiOX/PU-SF composite films was assessed through the degradation of Rhodamine B under visible light irradiation. Among the tested films, the BiOBr/PU-SF composite exhibited the highest removal rate of RhB at 98.9%, surpassing the removal rates of 93.7% for the BiOCl/PU-SF composite and 85.6% for the BiOI/PU-SF composite. Furthermore, an active species capture test indicated that superoxide radical (•O2−) and hole (h+) species played a predominant role in the photodegradation process. [ABSTRACT FROM AUTHOR]

The efficient production of silkworm silk is crucial to the silk industry. Silk protein synthesis is regulated by the juvenile hormone (JH) and 20-Hydroxyecdysone (20E). Therefore, the genetic regulation of silk production is a priority. JH binding protein (JHBP) transports JH from the hemolymph to target organs and cells and protects it. In a previous study, we identified 41 genes containing a JHBP domain in the Bombyx mori genome. Only one JHBP gene, BmJHBPd2, is highly expressed in the posterior silk gland (PSG), and its function remains unknown. In the present study, we investigated the expression levels of BmJHBPd2 and the major silk protein genes in the high-silk-producing practical strain 872 (S872) and the low-silk-producing local strain Dazao. We found that BmJHBPd2 was more highly expressed in S872 than in the Dazao strain, which is consistent with the expression pattern of fibroin genes. A subcellular localization assay indicated that BmJHBPd2 is located in the cytoplasm. In vitro hormone induction experiments showed that BmJHBPd2 was upregulated by juvenile hormone analogue (JHA) treatment. BmKr-h1 upregulation was significantly inhibited by the overexpression of BmJHBPd2 (BmJHBPd2OE) at the cell level when induced by JHA. However, overexpression of BmJHBPd2 in the PSG by transgenic methods led to the inhibition of silk fibroin gene expression, resulting in a reduction in silk yield. Further investigation showed that in the transgenic BmJHBPd2OE silkworm, the key transcription factor of the JH signaling pathway, Krüppel homolog 1 (Kr-h1), was inhibited, and 20E signaling pathway genes, such as broad complex (Brc), E74A, and ultraspiracle protein (USP), were upregulated. Our results indicate that BmJHBPd2 plays an important role in the JH signaling pathway and is important for silk protein synthesis. Furthermore, our findings help to elucidate the mechanisms by which JH regulates silk protein synthesis. [ABSTRACT FROM AUTHOR]

This paper describes the use of silk protein, including fibroin and sericin, from an alkaline solution of Ca(OH)2 for the clean degumming of silk, which is neutralized by sulfuric acid to create calcium salt precipitation. The whole sericin (WS) can not only be recycled, but completely degummed silk fibroin (SF) is also obtained in this process. The inner layers of sericin (ILS) were also prepared from the degummed silk in boiling water by 120 °C water treatment. When the three silk proteins (SPs) were individually grafted with glycidyl methacrylate (GMA), three grafted silk proteins (G-SF, G-WS, G-ILS) were obtained. After adding I2959 (a photoinitiator), the SP bioinks were prepared with phosphate buffer (PBS) and subsequently bioprinted into various SP scaffolds with a 3D network structure. The compressive strength of the SF/ILS (20%) scaffold added to G-ILS was 45% higher than that of the SF scaffold alone. The thermal decomposition temperatures of the SF/WS (10%) and SF/ILS (20%) scaffolds, mainly composed of a β-sheet structures, were 3 °C and 2 °C higher than that of the SF scaffold alone, respectively. The swelling properties and resistance to protease hydrolysis of the SP scaffolds containing sericin were improved. The bovine insulin release rates reached 61% and 56% after 5 days. The L929 cells adhered, stretched, and proliferated well on the SP composite scaffold. Thus, the SP bioinks obtained could be used to print different types of SP composite scaffolds adapted to a variety of applications, including cells, drugs, tissues, etc. The techniques described here provide potential new applications for the recycling and utilization of sericin, which is a waste product of silk processing. [ABSTRACT FROM AUTHOR]