Search

• Innovative metamaterial design approach proposed to improve energy absorption capacity. • Varying the structural parameter (D/d) enhanced the metamaterial auxetic effect. • HPH metamaterials absorb energy effectively horizontally with their honeycomb structure. • HPH metamaterials show excellent reusability at lower compression ratios. Hexagonal perforated honeycomb (HPH) metamaterials were designed, fabricated and investigated in this work. Initially, the mechanical properties and deformation modes of various proposed HPH metamaterials (HPH-U, HPH-1 L and HPH-3 L) under quasi-static vertical compression were analyzed using experimental and finite element methods. The findings reveal significant improvements in mechanical properties and energy absorption due to the honeycomb and hierarchical expandable design. Notably, the auxetic effect is diminished. Subsequently, the impact of key dimensional parameters on the mechanical properties and Poisson's ratio behavior was explored. The results highlighted that an increase of elliptical perforation major axis to minor axis ratio enhanced the auxetic effect but compromised load-bearing and absorptive capacity. Additionally, HPH metamaterials displayed exceptional performance under quasi-static horizontal compression, with their honeycomb structure enabling them to withstand both vertical and horizontal impacts while exhibiting excellent energy absorption capabilities. The study also identified relative density as a crucial factor influencing horizontal impact performance. Finally, the study subjected the HPH metamaterials to multiple quasi-static vertical repetitive compressions, meticulously analyzing variations in mechanical properties under diverse compression ratios. Due to distinctive structural design and impressive mechanical properties, HPH metamaterials demonstrate immense potential for applications in automotive engineering and sports protection fields. [Display omitted] [ABSTRACT FROM AUTHOR]

• Classification of the deformation modes of sandwich panels with Miura-ori cores is proposed. • An analytical meso‑scale model of panels' deformation with strong origami cores is developed. • The applicability of the homogenisation approach to the core material properties is analysed. • Experiments were conducted to validate the finite element studies and analytical models. • Comparison of the bending strengths of Miura-ori, PVC and honeycomb core panels is presented. Collapse mechanisms of sandwich panels with Miura-ori cores are analysed and classification of the deformation regimes under three-point bending is proposed. It is revealed that the homogenisation approach to the core material properties is not applicable to the deformation of panels with relatively strong origami cores due to the immediate simultaneous local deformations of the core and face sheets. To describe this deformation regime, an analytical model based on the development of new stationary hinge lines in Miura-ori cells and rigid motion rotation of the adjacent planes is proposed. The model pertains to a single degree-of-freedom model governed by the global bending angle of the panel. On the other hand, the homogenisation approach to the core material properties proved to be applicable to bending analysis of panels with relatively soft Miura-ori cores. This approach is used to analytically obtain the collapse load related to several deformation modes. Parametric FE analysis is conducted to further explore the deformation regimes of panels with different face sheet thicknesses. Experiments were conducted to validate the finite element studies and analytical models. A good agreement between the analytically predicted collapse forces and those obtained by the FE simulations is shown. Deformation mode maps are constructed based on the analytical and FE analyses in terms of the face sheet thicknesses and core strength. A brief comparison between the bending strength of sandwich panels with Miura-ori cores and panels with PVC and honeycomb cores is presented, demonstrating the superiority of the honeycomb cores loaded in the out-of-plane direction. On the other hand, the possibility of the development of high shear strains in metallic Miura-ori cores without damage gives them advantages compared to three-point bending of panels with low density PVC foam cores. [Display omitted] [ABSTRACT FROM AUTHOR]