Search

• Innovative metamaterial design approach proposed to improve energy absorption capacity. • Varying the structural parameter (D/d) enhanced the metamaterial auxetic effect. • HPH metamaterials absorb energy effectively horizontally with their honeycomb structure. • HPH metamaterials show excellent reusability at lower compression ratios. Hexagonal perforated honeycomb (HPH) metamaterials were designed, fabricated and investigated in this work. Initially, the mechanical properties and deformation modes of various proposed HPH metamaterials (HPH-U, HPH-1 L and HPH-3 L) under quasi-static vertical compression were analyzed using experimental and finite element methods. The findings reveal significant improvements in mechanical properties and energy absorption due to the honeycomb and hierarchical expandable design. Notably, the auxetic effect is diminished. Subsequently, the impact of key dimensional parameters on the mechanical properties and Poisson's ratio behavior was explored. The results highlighted that an increase of elliptical perforation major axis to minor axis ratio enhanced the auxetic effect but compromised load-bearing and absorptive capacity. Additionally, HPH metamaterials displayed exceptional performance under quasi-static horizontal compression, with their honeycomb structure enabling them to withstand both vertical and horizontal impacts while exhibiting excellent energy absorption capabilities. The study also identified relative density as a crucial factor influencing horizontal impact performance. Finally, the study subjected the HPH metamaterials to multiple quasi-static vertical repetitive compressions, meticulously analyzing variations in mechanical properties under diverse compression ratios. Due to distinctive structural design and impressive mechanical properties, HPH metamaterials demonstrate immense potential for applications in automotive engineering and sports protection fields. [Display omitted] [ABSTRACT FROM AUTHOR]

• A novel EARE is designed by introducing an elliptical annular into RE cell. • EARE produces extra vertical support without hindering lateral deformation. • EARE concurrently enhances auxetic performance, stiffness, and SEA. • Adjusting geometric parameters rationalizes designing mechanical properties. Auxetic structures have sparked a lot of interest due to their excellent mechanical characteristics and unusual negative Poisson's ratio influence. However, the large porosity property results in low stiffness, which limits their application scope. Current approaches to augment stiffness often result in diminished auxetic performance. Therefore, it is challenging to simultaneously enhance the auxetic, stiffness and energy absorption capacity of auxetic structures. To address this issue, this paper proposes a novel elliptical annular re-entrant honeycomb (EARE) by introducing an elliptical annular structure into a conventional re-entrant honeycomb (RE) cell, which can provide extra longitudinal support without hindering lateral deformation. The plateau stress, Poisson's ratio and energy absorption properties of the EARE are investigated by quasi-static compressive tests and finite element modeling. The results show that the EARE honeycomb has two plateau stages due to the supporting effect of the elliptical annular structure. Compared with the conventional RE honeycomb with the same wall thickness, the EARE honeycomb not only exhibits a stronger auxetic effect embodied in the Poisson's ratio reduced by 5.19%, but also has a higher average plateau stress and a higher specific energy absorption of 171.63% and 28.03%, respectively, which significantly improves the stiffness and energy absorption performance. The parameterized analysis reveals that by appropriately adjusting the geometric parameters, the stiffness, energy absorption, and auxetic effect of the EARE honeycomb can be enhanced. The research findings address the conflict between auxetic performance and honeycomb stiffness, providing new insights into the optimization of honeycomb structure design. [Display omitted] [ABSTRACT FROM AUTHOR]

The yield surfaces of several honeycombs with tunable Poisson's ratio, i. e. hexagonal honeycomb, augmented hexagonal honeycomb, re-entrant honeycomb, and augmented re-entrant honeycomb, are investigated by both theoretical analysis and numerical simulations. A theoretical model is developed to predict the mechanical response of these honeycombs considering the coupling effect of the shear stress and axial stress. Explicit expressions of the yield strength are derived for the four types of honeycombs. Good consistency is obtained between the analytical solutions and the numerical simulations. The results of the study provide a new idea for designing new honeycomb materials with tunable Poisson's ratio for engineering applications in the future. [ABSTRACT FROM AUTHOR]

• An aluminum foam filled re-entrant aluminum honeycomb structure (FRAH) is designed and investigated. • The proposed FRAH possesses higher specific energy absorption compared to the structure without filling aluminum foam. • The concept of the functional gradient (FG) is introduced into the composite re-entrant honeycombs. • 4. The FG design of the composite structure could reduce the initial peak stress and increase the platform stress value. Auxetic materials have been widely studied in recent years due to their excellent mechanical properties and special deformation modes. However, the application of auxetic materials in practical engineering is limited by the low stiffness. Therefore, in order to broaden the range of applications, it is significant to improve the stiffness of auxetic materials. In this study, the re-entrant aluminum honeycomb is combined with an aluminum foam. The mechanical properties and deformation modes of the aluminum foam filled re-entrant aluminum honeycomb are studied experimentally and numerically. In addition, the effects of the geometrical parameters of such a honeycomb are investigated. The results indicate that the stiffness and the energy absorption capacity can be effectively improved by filling the re-entrant honeycomb with aluminum foam. Due to the high compressibility of aluminum foam, the structure can still retain the auxetic effect at a large strain. In addition, the concept of the functional gradient is introduced into the field of composite re-entrant honeycomb, and the influence of angle gradient and thickness gradient on the structure is analyzed. The results show that the composite structure with the designed functional gradient outperforms the uniform composite structure in terms of initial peak stress and the stress value at the platform stage. Due to its superior performance, the proposed auxetic composite structures hold promising applications in the fields of vehicle engineering, protective engineering and aerospace engineering. [Display omitted] [ABSTRACT FROM AUTHOR]

• Metallic graded RECH prototypes fabricated through a low-cost step-by-step method. • Graded RECH takes advantage of structural hierarchy and functional gradient. • Gradient design causes multi-step deformation mode and multi-plateau stress. • Improved SEA and auxeticity of graded RECH under different crushing velocities. As lightweight energy-absorbing materials, auxetic honeycombs have demonstrated promising applications in engineering fields. In this study, the graded re-entrant circular auxetic honeycombs (RECH) were proposed, and their metallic prototypes were fabricated through a low-cost step-by-step method. The novel design of graded RECH takes advantage of structural hierarchy on the meso-scale and functional gradient on the macro-scale. The in-plane crushing behaviors of uniform (U) RECH, positive gradient (PG) RECH and negative gradient (NG) RECH with the same relative density were investigated under different crushing velocities. The finite element (FE) models were validated by comparing against the experimental and theoretical results. The results showed that the gradient design can control the multi-step deformation modes of RECH, which leads to the multi-plateau characteristics and reduced initial stress peaks in stress-strain curves. Under quasi-static crushing, the specific energy absorption (SEA) of PG-RECH is higher by 43.9% than that of U-RECH owing to more plastic deformations of hierarchical circular walls at a large strain. Under dynamic impacts, the SEA of NG-RECH is 2.7 times and 1.5 times those of PG-RECH and U-RECH at a small strain, respectively. Finally, the NG-RECH shows more negative Poisson's ratio (NPR) behavior than the U-RECH under dynamic crushing. This study offers new routes to the fabrication and design of auxetic metamaterials. [Display omitted] [ABSTRACT FROM AUTHOR]

• A simple re-entrant auxetic metamaterial is designed by rotating and connecting 2D re-entrant honeycomb cells. • The energy absorption of the proposed metamaterial is discussed under different design parameters. • The proposed 3D re-entrant auxetic lattice has desirable stiffness and specific energy absorption. • The initial peak stress and energy absorption capacity of the metamaterial can be adjusted via changing design parameters. As a branch of auxetics, the re-entrant hexagonal honeycomb has many superior mechanical performances. However, most research focused on two-dimensional (2D) re-entrant structures or three-dimensional (3D) structures without high compressibility. The energy absorption capacity of such structures is deficient for practical applications. Therefore, it is important to investigate the 3D re-entrant honeycomb structures which can sustain large deformation in order to make the most use of the materials. In this work, a simple 3D re-entrant unit cell is designed, manufactured and examined. The influence of geometric parameters on the deformation mode and energy absorption capacity is investigated numerically. The experimental results are in good agreement with the finite element prediction. The proposed 3D re-entrant auxetic metamaterial not only possesses a greater bearing capacity but also presents a stable compression deformation. The structure exhibits a desirable energy absorption behavior, including obvious auxetic behavior and a long stress plateau. By adjusting the geometrical parameters of the structure, the performances of energy absorption and compression stiffness can be improved. These findings provide a new idea to design 3D auxetic metamaterials and promote their utilization in protective structures. [Display omitted] [ABSTRACT FROM AUTHOR]

• Dynamic responses of auxetic DAHSPs under paper tube-guided air blasts is experimentally conducted. • Large-scale metallic DAHSPs with diverse core configurations are designed and fabricated via folding and vacuum brazing. • Fair comparisons on the blast resistance among different design strategies to vary the core relative density is performed. • Optimal thickness allocation within each layer/among various layers and foam filling for performance promotion are pursued. • Numerical simulations reveal the shock focusing effect and indicate reasonable agreement with the experimental data. Auxetic double arrowhead honeycombs (DAHs) featured by negative Poisson's ratio is attracting increasing attention owing to their tailorable mechanical properties and outstanding energy absorption capability. In this paper, the two-dimensional metallic DAHs were produced and used as the sandwich cores to construct the large-size double arrowhead honeycomb sandwich panels (DAHSPs). A comprehensive experimental investigation on their dynamic responses under the paper tube-guided air blasts was conducted. It majorly focused on the influence of core configurations induced by the variation of core wall thickness, horizontal distance, inclined angles, thickness allocations and foam filling on the deformation/failure modes, associated mechanisms and blast resistance of the target panels. Fair comparisons among different design strategies were performed to evaluate their relative performance. Experimental results show that relative to increasing the core wall thickness, the decrease of horizontal distance is more remarkable to reduce the back face deflection upon the similar weight expense, whereas the effect of inclined angles is limited due to the competition between enhanced bending stiffness and deteriorated transmitted load. A more efficient approach to decrease the back face deformation is to enlarge the inclined angles when the core relative density is relatively low but to decrease the horizontal distance at a high level of relative density. A further improvement of blast resistance can be achieved by allocating more mass to the stuffer wall rather than the tendon one, or by introducing a gradient DAH core instead of the homogeneous one. Compared to adjusting the metallic DAH core itself, the lightweight polyurethane (PU) foam filling is a more competitive manner to promote the blast performance. The preliminary numerical simulations confirmed the shock focusing effect of the paper tube support and indicated reasonable agreement with the experimental results. The present study is supposed to shed light on the design, manufacturing and optimization of auxetic sandwich structures for protection applications. [Display omitted] [ABSTRACT FROM AUTHOR]