Search

International audience; An experimental and numerical study of medium-velocity impact (within the range of 120 m/s) has been conducted on thin AA5086-H111 aluminum square plates. Targets with different thicknesses (between 2.5 and 4 mm), stratifications and aluminum alloys have been normally impacted by projectiles with 30 mm diameter and 127 g weight. Experimental results show that a compromise is to be found between the alloy strength and ductility, taking into account the impact velocity and energy. Ductile aluminum like AA5086-H111 grade subjected to medium-velocity impacts, showed the best perforation resistance.A finite element analysis was carried out using the ABAQUS finite element code. Slightly modified versions of the JohnsoneCook models of flow stress and fracture strain were applied. A good correlation between experimental and numerical results was found. The effect of strain rate appears to be predominant in the rupture initiation for the aluminum under consideration. Stratification seems to be advantageous compared to monolithic solutions. However, there are limitations to this tendency.

In the aircraft industry, manufacturers have to decide quickly whether an impacted sandwich needs repairing or not. Certain computation tools exist at present but they are very time-consuming and they also fail to perfectly model the physical phenomena involved in an impact. In a previous publication, the authors demonstrated the possibility of representing the Nomex™ honeycomb core by a grid of nonlinear springs and have pointed out both the structural behaviour of the honeycomb and the influence of core-skin boundary conditions. This discrete approach accurately predicts the static indentation on honeycomb core alone and the indentation on sandwich structure with metal skins supported on rigid flat support. In this study, the domain of validity of this approach is investigated. It is found that the approach is not valid for sharp projectiles on thin skins. In any case, the spring elements used to model the honeycomb cannot take into account the transverse shear that occurs in the core during the bending of a sandwich. To overcome this strong limitation, a multi-level approach is proposed in the present article. In this approach, the sandwich structure is modelled by Mindlin plate elements and the computed static contact law is implemented in a nonlinear spring located between the impactor and the structure. Thus, it is possible to predict the dynamic structural response in the case of low-velocity/low-energy impact on metal-skinned sandwich structures. A good correlation with dynamic experimental tests is achieved.