Search

• Thermal modification does not significantly change the ballistic performance of coastal western hemlock CLT. • Density and hardness do no fully encompass the energy absorbing capacity of CLT under small arms ballistic threats. • Empirically fit UFC partial penetration equation formulations fit treatment specific datasets with minimal error. • One global UFC partial penetration equation can be utilized for design with an appropriate safety factor. To test and understand the potential for integration of thermally modified coastal western hemlock CLT systems in military applications, 109 ballistic experiments were conducted at the United States Army Engineer Research Development Center's Fragmentation Simulation Facility. For a range of CLT thicknesses, the depth of penetration and residual velocities were recorded for different striking velocities utilizing a 0.50 caliber steel sphere projectile. This information was used to compare and add to the existing ballistics data for CLT, investigate the effects of thermal modification on high strain rate loading of wood, assess physics-based empirical design equations used by the Unified Facilities Criteria, and evaluate energy absorbing behavior at a range of thicknesses and striking velocities. The experimental results showed that thermal modification does not significantly alter the full and partial penetration performance of coastal western hemlock CLT. However, the mechanism of fracture along the path of the projectile differed, which indicates that the model parameters used in the UFC design equation (density, hardness, and projectile properties) may not fully encompass the ballistic failure mechanisms of CLT. [ABSTRACT FROM AUTHOR]

Abstract: For competitors in the shooting sports, gun recoil can affect performance and create discomfort. An objective method of measuring felt recoil forces would be useful to evaluate methods of recoil reduction. An experimental test apparatus was developed to measure recoil forces of sporting rifles and shotguns. No modifications to the firearms themselves were necessary to make the measurements. Through both inertial and dissipative restraint mechanisms, the apparatus reproduced gun movement that was representative of that experienced by a particular shooter. This should result in measured recoil forces similar to those experienced by the shooter. The apparatus measures the horizontal shoulder force and the vertical force component exerted at the stock comb. The recoil event was found to be quite short, having duration on the order of 10ms. Peak recoil forces for common shotgun target loads were in the range of 1.6–2.2kN (360–494lbf). The apparatus was found sensitive enough to measure recoil force differences among different factory loaded ammunition, and differences in recoil force imparted by different firearms shooting the same ammunition. The apparatus should prove useful for quantifying differences in felt recoil as affected by ammunition type, gunstock geometry, barrel porting, recoil reduction devices, and gun weight, among other factors. [Copyright &y& Elsevier]

Abstract: Greenhill''s Rule for estimating rifling twist in artillery and small arms is interesting both because of its simplicity and longevity. This article describes (a) Greenhill''s Simplified Rule for estimating the twist of rifling; (b) describes his original, more complete, but much less known Rule; (c) summarizes how he got the Rule; and (d) relates it to the modern stability factor. Some comments about twist, bullet stability, and black powder velocities are presented. [Copyright &y& Elsevier]

• Small and medium arms fire can be stopped with a snow-based protective structure. • Snow-filled commercial gabions can be efficiently constructed. • Structures can be construction at a rate of about 0.5 hr/m3 with common equipment. • Snow set-up time of 24 h is recommended. • All but one model of projectile penetration in snow matched our results within 32%. Small (5.56 mm, 7.62 mm and 9 mm) and medium (12.7 mm) arms rounds were fired at snow-filled 1.5m cubic gabions in a mid-winter condition in Fairbanks, Alaska. The rounds were excavated and penetration by each ammunition type was measured. A distribution and average of penetration depth was determined. All 320 rounds fired were captured within 1.5m after entering the snow barrier. Comparison with published models of ballistics penetration of snow showed mixed results with several matching our data within 10% and all but one within 32%. However, most of these models are simplistic in that they accommodate limited variables and therefore may not be expected to perform well in all settings. We conclude that snow-based ballistics protection structures can be quickly and efficiently erected in suitable environments and with minimal size, can provide reliable protection against small and medium arms fire. [ABSTRACT FROM AUTHOR]