Search

• Two field tests on concrete targets subjected to a projectile penetration followed by charge explosion were conducted. • The failure mode and stress waves in concrete were experimentally obtained. • Two-step numerical models based on the Kong-Fang concrete material model and SPG method were developed and validated. • The influences of projectile penetration on destructive effects caused by following charge explosion were clarified. The earth penetration weapons (EPWs) usually penetrate into protective structures firstly, and then detonate the charge to induce high-intensity blast stress waves to cause further damage. Existing investigations on the destructive effect caused by the following charge explosion after penetration of EPWs are very limited. To clarify the combined destructive effect in concrete material caused by an EPW, an experimental and numerical investigation on failure mode and stress wave propagation in concrete target subjected to a projectile penetration followed by charge explosion was conducted in the present study. Firstly, two field tests on high strength fiber-reinforced concrete targets subjected to a projectile penetration followed by charge explosion were conducted, in which the failure and blast waves in concrete targets were comprehensively obtained. Then two-step numerical models based on the Kong-Fang concrete material model and SPG method were developed and validated against the experimental data. Finally, based on the validated numerical models, the influences of projectile penetration on the destructive effect caused by following charge explosion were analyzed. The numerical results demonstrated that the damage caused by projectile penetration has significant influences on the final failure mode and stress wave propagation in concrete targets. The research results can provide an important reference for the design of protective structure against EPWs. [ABSTRACT FROM AUTHOR]

• High hardness steel (HHS) sheet with UHMWPE composite backing were tested against a hardened steel core projectile. • The projectile core was eroded by the HHS sheet and stopped in UHMWPE composite. • It is observed that only a core eroded to a certain length and weight by armor system can be defeated. • In numerical modeling core failure strain was determined from the residual weight of cores. • The numerical model can be used to evolve armor design. Thin high hardness steel sheets can be an alternative to expensive ceramic armor systems designed to defeat hardened core projectiles. A thin high hardness steel sheet backed with UHMWPE fiber-reinforced composite was ballistically tested against a 7.62 × 39 mm hardened steel core projectile in a single-stage gas gun. Thin steel sheets of 530 BHN hardness were adhesively bonded with UHMWPE fiber-reinforced composite to fabricate armor plates. Armor plates were able to defeat the projectile showing considerable potential. Tensile strength of steel sheet and UHMWPE-fiber reinforced ply was also determined. A detailed numerical simulation of the impact event was also performed to understand the phenomenon of defeat and penetration in greater detail. The numerical model was calibrated from the recovered projectile's core after the ballistic test. [ABSTRACT FROM AUTHOR]

The database for depth of penetration by projectiles into semi-infinite targets is quite extensive. The objective is to use the experimental semi-infinite penetration data to predict finite-thickness target effects. Similitude considerations are used to represent penetration response as a function of a normalized impact velocity, which is the ratio of the penetration pressure to the target strength. Then, a least-squares regression analysis methodology was applied to the normalized experimental data to provide an analytic expression for the normalized depth of penetration as a function of the normalized impact velocity over a very large velocity range, typically a few hundred meters per second to over 3500 m/s. We use the analytic expression, along with some simplifying assumptions, to estimate ballistic limit thickness T 50 and/or the ballistic limit velocity V 50 . If a target is overmatched, i.e., perforated by the projectile, an estimate is also made for the projectile residual velocity and residual length. The experimental data on which the regression fit is based consists of L / D 10 projectiles, so a procedure is also developed to account for different projectile aspect ratios. A series of examples are provided to demonstrate the utility and accuracy of the approach. [ABSTRACT FROM AUTHOR]

Abstract: This paper examines the penetration and perforation of fibre-reinforced plastic (FRP) laminates struck by rigid projectiles with different nose shapes within a wide range of impact conditions using ABAQUS/Explicit code. It is assumed that the FRP laminate target response can be represented by a velocity dependent forcing function which eliminates discretizing the target as well as the need for a complex contact algorithm. The forcing function is then applied to the surface of the projectiles as boundary conditions in the numerical model. With this combined analytical and computational technique we can obtain the depth of penetration, residual velocity, ballistic limit, transient response in terms of time-histories of displacement/penetration, velocity and deceleration of the projectile. It is shown that the model predictions are in good correlation with available experimental data. [Copyright &y& Elsevier]

This article presents computed results for the responses of ceramic targets, with and without prestress, subjected to projectile impact. Also presented is a computational technique to include prestress. Thin and thick ceramic target configurations are used to understand the effect prestressing has on ballistic performance. For both targets two prestress levels (small and large), and two prestress states (radial and hydrostatic) are investigated. The small prestress is similar in magnitude to values obtained experimentally and the large prestress is approximately the maximum prestress the confinement can produce (determined computationally). The targets are subjected to projectile impact and the resulting ballistic responses are evaluated. In all cases prestressing the ceramic enhanced the ballistic performance, although the effect of the different prestress conditions on the ballistic response was not always obvious. [Copyright &y& Elsevier]