Search

Hydrogen is one of the most promising options being considered as the fuel of future. However, injection of hydrogen into modern gasoline fueled engines can cause some issues such as power loss. This study, therefore, aims to address this challenge in a simulated hydrogen/gasoline dual-fueled engine by developing a novel and innovative approach without possible side effects such as NOx increment. To achieve this goal, the impacts of water injection and the start of the combustion (SOC) modification in a gasoline/hydrogen duel fueled engine have been rigorously investigated. In current methodology, an engine is simulated using AVL BOOST software and the model is validated against the experimental data. The Latin Hypercube design of experiments method was employed to determine the design points in 3-dimensional space. Due to the existing trade-off between NOx and BMEP, multi-objective optimization using genetic algorithm (GA) was implemented to determine the optimum values of water injection and SOC in various hydrogen energy shares and the effects of optimum design parameters on the main engine performance and emission parameters were investigated. The results showed that the proposed solution could recover the brake mean effective pressure (BMEP) and in some hydrogen energy shares even increase it above the level of single fueled gasoline engine with the added benefit of there being no increase in NOx compared to the original level. Furthermore, other emissions and engine performance parameters are improved including the engine equivalent Brake specific fuel consumption (BSFC) which was shown to increased up to 4.61%.

Environmental crisis requires using cleaner energy sources for different sectors including the transportation. Hydrogen can support the transition of the automotive industry from petrol and diesel into a sustainable fuel. It could be the main source of energy or the auxiliary fuel in vehicles. As an auxiliary fuel, it has recently been considered in hydroxyl (HHO) form for reducing the emissions from transportation fleet. In this study, an HHO generator with the optimum power consumption was utilised for HHO injection into the intake manifold of a petrol engine as the case study. High concentration of CO is expected to be produced during idling, so the experiments were designed to inject ultra-low HHO for reducing CO emissions. The results were very promising, and it was shown that the CO emission could be reduced by about 98%. Furthermore, a novel design was developed based on the concept of waste heat recovery (WHR) for powering the HHO unit. Engine was simulated in AVL software to design a thermo-electric generators (TEG) for running the HHO unit. Based on the results, TEG can provide the energy required for HHO unit as the energy output of the TEG was between 91 kJ and 169 kJ for the case study while the energy consumption of the proposed HHO generator was just about 22.5 kJ. The results of this study are recommending a practical solution for bringing HHO injection from laboratory research into the real practice.