Search

The adoption of effective, minimal, and versatile electrocatalysts for water splitting to generate hydrogen fuels is of critical importance. The bulk of newly described materials have considerable onset potential, but their electrocatalytic activity is limited by weak electrical conductivity and a limited range of catalytic sites. The combination of a few precious metals added with transition metal-based compounds is a novel and captivating approach. Herein, cobalt ferrite oxide (Co 2 FeO 4) @ palladium oxide (PdO) nanostructures have been prepared through the combined use of hydrothermal and ultraviolet (UV) irradiation techniques. For hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) kinetics, the modified composition offers a high concentration of active sites, improved electrical conductivity, and stability. The Co, Fe, and Pd ions at the composite system's interface may affect the adsorption energy of reaction intermediates synergistically, enabling the process to continue with less potential. The electrocatalyst Co 2 FeO 4 @PdO demonstrates an excellent bifunctional approach to electrochemical water splitting (EWS) for HER and OER in alkaline medium. As-prepared electrocatalyst shows an overpotential value of 269 and 259 mV for HER and OER at 10 and 20 mA/cm2 current densities respectively. The low charge transfer resistance values such as 72.2 and 62.4 Ω and durability for 48 h has been observed toward HER and OER , support this material as an efficient and durable electrocatalyst for energy conversion systems. [Display omitted] • Effective Cobalt–Iron-Ferrite oxides and Palladium-oxide based bifunctional electrocatalyst. • Promising activity for HER and OER with lower Tafel slope values in the alkaline media. • Longer stability and durability for 20 h. [ABSTRACT FROM AUTHOR]

Development of efficient, low cost and multifunctional electrocatalysts for water splitting to harvest hydrogen fuels is a challenging task, but the combination of carbon materials with transition metal-based compounds is providing a unique and attractive strategy. Herein, composite systems based on cobalt ferrite oxide-reduced graphene oxide (Co 2 FeO 4) @(rGO) using simultaneous hydrothermal and chemical reduction methods have been prepared. The proposed study eliminates one step associated with the conversion of GO into rGO as it uses direct GO during the synthesis of cobalt ferrite oxide, consequently rGO based hybrid system is achieved in-situ significantly, the optimized Co 2 FeO 4 @rGO composite has revealed an outstanding multifunctional applications related to both oxygen evolution reaction (OER) and hydrogen counterpart (HER). Various metal oxidation states and oxygen vacancies at the surface of Co 2 FeO 4 @rGO composites guided the multifunctional surface properties. The optimized Co 2 FeO 4 @rGO composite presents excellent multifunctional properties with onset potential of 0.60 V for ORR, an overpotential of 240 mV at a 20 mAcm−2 for OER and 320 mV at a 10 mAcm−2 for HER respectively. Results revealed that these multifunctional properties of the optimized Co 2 FeO 4 @ rGO composite are associated with high electrical conductivity, high density of active sites, crystal defects, oxygen vacancies, and favorable electronic structure arisinng from the substitution of Fe for Co atoms in binary spinel oxide phase. These surface features synergistically uplifted the electrocatalytic properties of Co 2 FeO 4 @rGO composites. The multifunctional properties of the Co 2 FeO 4 @ rGO composite could be of high interest for its use in a wide range of applications in sustainable and renewable energy fields. Illustration of multifunctional surface properties of Co 2 FeO 4 @rGO composite. [Display omitted] • In situ rGO and cobalt ferrite oxide (Co 2 FeO 4 @rGO) composite is prepared. • The synthesized composite exhibited tri-functional water catalysis. • Composite shows an overpotential of 240 mV at a 20 mAcm−2 for OER. • A long term durability of 48 h was also demonstrated by composite material. [ABSTRACT FROM AUTHOR]

Integrating transition metal complexes with carbon-based materials, especially graphene, is a useful strategy for synthesizing effective hydrogen evolution catalysts. Herein, we report a design of hollow hexagonal NiSe–Ni 3 Se 2 nanosheets grown on reduced graphene oxide (NiSe–Ni 3 Se 2 /rGO) by a simple hydrothermal method as an effective catalyst for hydrogen evolution reaction (HER) in the full pH range. In 0.5 M H 2 SO 4 , the NiSe–Ni 3 Se 2 /rGO possesses 112 mV to achieve 10 mA cm−2 and a small Tafel slope (61 mV dec−1). In 1.0 M PBS and 1.0 M KOH, the overpotentials are 261 and 188 mV at 10 mA cm−2, and Tafel slopes are 103 and 92 mV dec−1, respectively. Meanwhile, it owns good cycle stability and durability over 20 h in the whole pH range (0-14). In all solutions, the HER performance of NiSe–Ni 3 Se 2 /rGO is better than that of NiSe–Ni 3 Se 2. This is because the rGO substrate accelerates the electron transfer and improves the electrical conductivity, increasing HER activity of catalyst. • The hollow hexagonal NiSe-Ni3Se2 nanosheets uniformly decorate the rGO. • The hollow structure exposes more active sites and transport pathways. • The hybrid material exhibits superior performance for HER in all pH media. • The stability of the composite is good under a variety of pH conditions. [ABSTRACT FROM AUTHOR]

Seeking the efficient and robust electrocatalysts necessarily enhances performance of hydrogen evolution reaction (HER). Increasing the surface active sites is a means to improve the performance. Herein, we use the Ni 0·85 Se anchored on reduction of graphene oxide (Ni 0·85 Se/rGO) hybrid material skillfully established by one-step facile hydrothermal method as a robust and stable electrocatalyst applying to hydrogen evolution reaction (HER). In terms of morphology, Ni 0·85 Se nanospheres composed of many nanosheets are uniformly distributed on the graphene sheet layer. We also detailedly analyze its properties. Based on the interaction between Ni 0·85 Se and rGO, and the roles of graphene are as a substrate to heighten conductivity, possesses more active surface area by limiting growth of Ni 0·85 Se, and increases dispersion for exposing more active surface area and enlarge ion/electron transfer rate. In HER, the Ni 0·85 Se/rGO catalyst displays the overpotential of 128 mV with a common current density of 10 mA cm−2, a small Tafel slope of 91 mV dec−1, an extremely low onset potential of 37 mV, outstanding stability that a high current retention of 97.7% after 1000 cycles and well long-term stability for 18 h, outperforming the capability of Ni 0·85 Se nanospheres in alkaline solution for HER. The above results indicate that the Ni 0·85 Se/rGO hybrid material is a good HER ability and non-noble metal electrocatalyst has potential value in HER. • The Ni 0.85 Se nanospheres uniformly decorate the rGO sheets. • The Ni 0.85 Se/rGO electrocatalyst possesses more active surface area. • The stability of the composites can reach 97.7%. • The hybrid material exhibits superior performance for HER. [ABSTRACT FROM AUTHOR]

In this paper, we report the three-dimensional self-supported CoMoO 4 nanosheet clusters on the nickel foam (denoted as CoMoO 4 /NF) by a facile hydrothermal-calcination method for efficient hydrogen generation. As a result, the freestanding CoMoO 4 electrode exhibits an efficient electrochemical activity towards hydrogen evolution reaction, showing overpotentials as low as 68 and 178 mV at current densities of 10 and 100 mA cm−2 in the alkaline condition (1 M KOH), respectively, a Tafel slope value of 82 mV per decade. Moreover, the electrode exhibits remarkable electrochemical durability for 1000 cycles. Significantly, the water splitting electrolyzer assembled with CoMoO 4 /NF || NiFe LDH/NF (the nickel iron layered double hydroxide supported on the nickel foam) system achieved 20 mA cm−2 at 1.63 V, showing the CoMoO 4 /NF is promising for practical water splitting applications. • The low-cost and effective transition metal oxide of CoMoO 4 was adopted for hydrogen generation. • The open nanostructure can facilitate permeating electrolyte as well as releasing hydrogen molecules. • The crosslinked nanosheet clusters can offer amounts of active sites for hydrogen evolution reaction. [ABSTRACT FROM AUTHOR]

Abstract At present, there is an urgent need for plentiful non-noble metal catalyst to substitute for valuableness platinum based metal catalyst in electrochemical water splitting. Here, we fabricated a three-demensional (3D) Ni Co NiCo 2 O 4 nanosheets electrocatalyst that directly grew on Ni foam firstly and then were reduced in 0.1 mol dm−3 sodium borohydride solution. This electrode exhibited high activity in 1.0 mol dm−3 KOH solution with an onset potential of ∼40 mV and a tafel slope of 77 mV dec−1. Furthermore, the Ni Co NiCo 2 O 4 /NF electrode showed a splendid durability during long-playing electrochemical test. Our work may provide an inexpensive, easy-to-obtain and excellent catalyst candidate for future electrolytic water research and industry studies that may involve hydrogen applications in the future. Highlights • The Ni Co NiCo 2 O 4 /NF is an inexpensive, easy-to-obtain and excellent electrode. • When the current density up to 10 mA cm−2 requires an overpotential 125 mV. • Metallic Ni and Co core enhance the electrode activity. [ABSTRACT FROM AUTHOR]

Porous Ni 2 P nanoflower supported on nickel foam (Ni 2 P@Ni foam) electrodes are synthesized via a simple hydrothermal growth strategy accompanied with further phosphating treatment. The prepared electrodes are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM). Electro-catalytic performances towards urea electro-oxidation are tested by cyclic voltammetry (CV), chronoamperometry (CA) coupled with electrochemical impedance spectroscopy (EIS). By phosphating Ni(OH) 2 precursor, the final obtained Ni 2 P@Ni foam electrode presents a porous Ni 2 P nanoflower structure within abundant porosity, and so exposes a large amount of electro-catalytic active sites and electronic transmission channels to accelerate the interfacial reaction. Compared with Ni(OH) 2 @Ni foam precursor, the Ni 2 P@Ni foam catalyst exhibits more excellent electro-catalytic activity as well as lower onset oxidation potential. Remarkably, the Ni 2 P@Ni foam catalyst reaches a peak current density of 750 mA cm −2 with an onset oxidation potential of 0.24 V (vs. Ag/AgCl) accompanied by an excellent stability in 0.60 M urea with 5.00 M KOH solutions. Benefiting from the unique porous nanosheet structure, the as-synthesized Ni 2 P@Ni foam catalyst performs a highly enhanced catalytic behavior for alkaline urea electro-oxidation, indicating that the material can be hopefully applied in direct urea fuel cells. [ABSTRACT FROM AUTHOR]