Search

Photocatalytic reduction of CO 2 is a promising technology to capture CO 2 and convert it into solar fuels simultaneously. However, current photoreactors usually face the problems of low specific surface area, non-uniform light distribution and poor photon transfer. To address these issues, a novel optofluidic membrane microreactor with high surface-area-to-volume ratio, enhanced photon and mass transport and uniform light distribution was proposed in this work by combining optofluidics with the membrane reactor technology for the photocatalytic reduction of CO 2 with liquid water. A TiO 2 /carbon paper composite membrane was prepared as the photocatalytic membrane via coating TiO 2 onto the carbon paper followed by hydrophobic treatment by poly-tetrafluoroethylene (PTFE) for the separation of the gas/liquid phases. The performance of the proposed optofluidic membrane microreactor was evaluated by measuring the methanol yield. The effects of the liquid water flow rate, light intensity and catalyst loading on the methanol yield were also studied. It was shown that a maximum methanol yield of 111.0 μmole/g-cat·h was achieved at a flow rate of 25 μL/min and under the light intensity of 8 mW/cm 2 , which is among the top in comparison to the reported data. Results obtained fully demonstrate the feasibility and superiority of the proposed optofluidic membrane microreactor for the photocatalytic reduction of CO 2 . [ABSTRACT FROM AUTHOR]